M. Von-allmen, Laser-Beam Interactions with Materials, pp.6-48, 1987.

J. Cazaux, Inititation à la physique du solide, Surf. Coat. Techn, vol.63, pp.40565-71, 1989.

L. He and M. Akaishi, Structural evolution in boron nitrides during the hexagonal-cubic phase transition under high pressure at high temperature, Microscopy Research and Technique, vol.26, issue.140, pp.243-250, 1998.
DOI : 10.1002/(SICI)1097-0029(19980215)40:4<243::AID-JEMT1>3.0.CO;2-T

V. L. Solozhenko and . Diam, New concept of BN phase diagram: an applied aspect, Diamond and Related Materials, vol.4, issue.1, pp.1-4, 1994.
DOI : 10.1016/0925-9635(94)90060-4

R. H. Savage and D. L. Schaefer, Vapor Lubrication of Graphite Sliding Contacts, Journal of Applied Physics, vol.27, issue.2, pp.136-138, 1956.
DOI : 10.1063/1.1722322

P. J. Bryant, P. L. Gustshall, and L. H. Taylor, A study of mechanisms of graphite friction and wear, Wear, vol.7, issue.1, pp.118-126, 1964.
DOI : 10.1016/0043-1648(64)90083-3

J. Milan and I. A. , Notions fondamentales sur le frottement, l'usure, la lubrification et la technologie des surfaces

A. Nechepurenko and S. Samini, Oxidation Protection of Graphite by BN Coatings, Journal of Solid State Chemistry, vol.154, issue.1, pp.162-164, 2000.
DOI : 10.1006/jssc.2000.8829

T. Mega, R. Morimoto, and M. Morita, Auger Electron Spectroscopy of Boron Nitride in Hot-rolled Graphitized Steel Sheet, Surface and Interface Analysis, vol.20, issue.55, pp.375-379, 1996.
DOI : 10.1002/(SICI)1096-9918(199606)24:6<375::AID-SIA127>3.0.CO;2-T

F. P. Bowden and D. Tabor, The Friction and Lubrication of Solids, American Journal of Physics, vol.19, issue.7, 1964.
DOI : 10.1119/1.1933017

L. Fouilland-paille, S. Ettaqi, S. Benayoun, and J. J. Hantzpergue, Structural and mechanical characterization of Ti/TiC cermet coatings synthesized by laser melting, Surface and Coatings Technology, vol.88, issue.1-3, pp.204-211, 1996.
DOI : 10.1016/S0257-8972(96)02925-8

J. K. Shin, J. H. Suh, and J. S. Kim, Effect of laser surface modification on the corrosion resistance of Alloy 600, Surface and Coatings Technology, vol.107, issue.2-3, pp.94-100, 1998.
DOI : 10.1016/S0257-8972(98)00552-0

S. Sankaranarayanan and A. Kar, Nonlinear effects of laser-plasma interaction on melt-surface temperature, Journal of Physics D: Applied Physics, vol.32, issue.7, pp.777-784, 1999.
DOI : 10.1088/0022-3727/32/7/005

B. Medres, L. Shepeleva, and G. Ryk, Laser surface treatment of steels with CrB2 and Ni2B powders, Journal of Laser Applications, vol.11, issue.5, pp.216-219, 1999.
DOI : 10.2351/1.521867

M. Tayal and K. Mukherjee, Localized boriding of low-carbon steel using a Nd:YAG laser, Journal of Materials Science, vol.34, issue.21, pp.5699-5702, 1994.
DOI : 10.1007/BF00349967

G. Shafirstien and M. Bamberger, Laser surface alloying of carbon steel and ??-Fe with CrB2, Surface and Coatings Technology, vol.45, issue.1-3, pp.417-423, 1991.
DOI : 10.1016/0257-8972(91)90251-Q

C. T. Kwok, F. T. Cheng, and H. C. Man, Laser surface modification of UNS S31603 stainless steel. Part I: microstructures and corrosion characteristics, Materials Science and Engineering: A, vol.290, issue.1-2, pp.55-73, 2000.
DOI : 10.1016/S0921-5093(00)00929-1

P. A. Molian and W. E. Wood, Rapid solidification of laser-processed chromium steels, Materials Science and Engineering, vol.62, issue.2, pp.271-277, 1984.
DOI : 10.1016/0025-5416(84)90231-3

H. S. Peiser, H. P. Rooksby, and A. J. Wilson, X-ray diffraction polycristallin materials, pp.409-480, 1960.

H. P. Klug and L. E. Alexander, X-ray diffraction procedures for polycristallin and amorphous materials, pp.491-538, 1967.

K. Sridhar and M. B. Deshmutkh, Microstructural Characterization of Superaustenitic Stainless Steel Surface Alloys Formed Using Laser Treatment, Journal of Thermal Spray Technology, vol.9, issue.3, pp.377-388, 2000.
DOI : 10.1361/105996300770349836

M. A. Anjos, R. Vilar, and W. M. Steen, Fe???Cr???Ni???Mo???C alloys produced by laser surface alloying, Surface and Coatings Technology, vol.70, issue.2-3, pp.235-242, 1995.
DOI : 10.1016/0257-8972(94)02268-U

S. Sen, I. Ozbek, and U. Sen, Mechanical behavior of borides formed on borided cold work tool steel, Surface and Coatings Technology, vol.135, issue.2-3, pp.173-177, 2001.
DOI : 10.1016/S0257-8972(00)01064-1

W. Xiabao, L. Yong, and Y. Songlan, Formation of TiB2 whiskers in laser clad Fe???Ti???B coatings, Surface and Coatings Technology, vol.137, issue.2-3, pp.209-216, 2001.
DOI : 10.1016/S0257-8972(00)01113-0

M. Tayal and K. Mukherjee, Localized boriding of low-carbon steel using a Nd:YAG laser, Journal of Materials Science, vol.34, issue.21, pp.5699-5702, 1994.
DOI : 10.1007/BF00349967

D. Radaj, Heat Effect Welding, Chap. 2 p. 19-124, éd, 1992.

J. Com-nougé, E. Kerrand, B. Galland, and M. , Barral, 4 ème colloque international sur le soudage et la fusion par faisceau d'électrons et laser, pp.26-30581, 1988.

Z. H. Shen, S. Y. Zhang, J. Lu, and X. W. Ni, Mathematical modeling of laser induced heating and melting in solids, Optics & Laser Technology, vol.33, issue.8, pp.533-537, 2001.
DOI : 10.1016/S0030-3992(01)00005-6

X. Z. Jin and L. J. Li, A conduction model for deep penetration laser welding based on an actual keyhole, Optics & Laser Technology, vol.35, issue.1, pp.5-12, 2003.
DOI : 10.1016/S0030-3992(02)00116-0

S. Bec, A. Tonck, and J. L. , Indentation at the Nanometer Scale on Ultra Thin Films of Diamond-Like Carbon, MRS Proceedings, vol.356, pp.657-662, 1995.
DOI : 10.1063/1.345566

T. Y. Tsui and G. M. Pharr, Substrate effects on nanoindentation mechanical property measurement of soft films on hard substrates, Journal of Materials Research, vol.436, issue.01, p.292, 1999.
DOI : 10.1098/rspa.1993.0050

W. C. Oliver and G. M. Pharr, An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments, Journal of Materials Research, vol.XI, issue.06, pp.1564-1580, 1992.
DOI : 10.1557/JMR.1992.0613

X. Li and B. Bhushan, A review of nanoindentation continuous stiffness measurement technique and its applications, Materials Characterization, vol.48, issue.1, pp.11-36, 2002.
DOI : 10.1016/S1044-5803(02)00192-4

D. Schneider and T. Schwarz, A photoacoustic method for characterising thin films, Surface and Coatings Technology, vol.91, issue.1-2, pp.136-146, 1997.
DOI : 10.1016/S0257-8972(96)03147-7

C. Bindal and A. H. Ucisik, Characterization of borides formed on impurity-controlled chromium-based low alloy steels, Surface and Coatings Technology, vol.122, issue.2-3, pp.208-213, 1999.
DOI : 10.1016/S0257-8972(99)00294-7

J. H. Yoon, Y. K. Jee, and S. Y. Lee, Plasma paste boronizing treatment of the stainless steel AISI 304, Surface and Coatings Technology, vol.112, issue.1-3, pp.71-75, 1999.
DOI : 10.1016/S0257-8972(98)00743-9

K. T. Rie, Recent advances in plasma diffusion processes, Surface and Coatings Technology, vol.112, issue.1-3, pp.56-62, 1999.
DOI : 10.1016/S0257-8972(98)00747-6

I. Ozbek and C. Bindal, Mechanical properties of boronized AISI W4 steel, Surface and Coatings Technology, vol.154, issue.1, pp.14-20, 2002.
DOI : 10.1016/S0257-8972(01)01409-8

S. Weissmantel, G. Reisse, and B. Keiper, Microstructure and mechanical properties of pulsed laser deposited boron nitride films, Diamond and Related Materials, vol.8, issue.2-5, pp.377-381, 1999.
DOI : 10.1016/S0925-9635(98)00394-X

T. Wittkowski, J. Jorzick, and K. Jung, Elastic properties of thin h-BN films investigated by Brillouin light scattering, Thin Solid Films, vol.353, issue.1-2, pp.137-143, 1999.
DOI : 10.1016/S0040-6090(99)00388-0

. Provence, sur les revêtements, alliage boruré et composite, ayant le meilleur comportement tribologique, pour étudier les mécanismes d'usure sur deux types de tribomètres (Annexe 5). Egalement, des essais de corrosion sur ces mêmes revêtements sont effectués pour vérifier si leurs performances tribologiques s'accompagnent d'une amélioration de la résistance à la corrosion

F. P. Bowden and D. Tabor, The Friction and Lubrication of Solids, American Journal of Physics, vol.19, issue.7, pp.28-31, 1954.
DOI : 10.1119/1.1933017

Y. M. Chen, B. Rigaut, F. Armanet, and J. , Wear behaviour of partially stabilized zirconia at high sliding speed, Journal of the European Ceramic Society, vol.6, issue.6, pp.383-390, 1990.
DOI : 10.1016/0955-2219(90)90006-2

F. E. Kennedy and A. Handbook, Friction, lubrication and wear, pp.438-444, 1992.

O. Lesquois, J. J. Serra, and P. Kapsa, Degradations in a high-speed sliding contact in transient regime, Wear, vol.201, issue.1-2, pp.163-170, 1996.
DOI : 10.1016/S0043-1648(96)07243-2

R. H. Savage and D. L. Schaeffer, Vapor Lubrication of Graphite Sliding Contacts, Journal of Applied Physics, vol.27, issue.2, pp.136-138, 1956.
DOI : 10.1063/1.1722322

P. J. Bryant, P. L. Gutshall, and L. H. Taylor, A study of mechanisms of graphite friction and wear, Wear, vol.7, issue.1, pp.118-126, 1964.
DOI : 10.1016/0043-1648(64)90083-3

J. P. Hirvonen, J. Koskinen, and J. R. Jervis, Present progress in the development of low friction coatings, Surface and Coatings Technology, vol.80, issue.1-2, pp.139-150, 1996.
DOI : 10.1016/0257-8972(95)02701-7

C. Donnet, J. M. Martin, and T. L. Morgne, Super-low friction of MoS2 coatings in various environments, Tribology International, vol.29, issue.2, pp.123-128, 1996.
DOI : 10.1016/0301-679X(95)00094-K

Y. Berthier, M. Godet, and M. Brendle, Velocity Accommodation in Friction, Tribology Transactions, vol.30, issue.4, pp.490-496, 1989.
DOI : 10.1016/0021-9797(77)90008-X

Y. Fu and A. W. Batchelor, Laser alloying of aluminum alloy AA 6061 with Ni and Cr. Part II. The effect of laser alloying on the fretting wear resistance, Surface and Coatings Technology, vol.102, issue.1-2, pp.119-126, 1998.
DOI : 10.1016/S0257-8972(97)00572-0

J. Q. Hu, Q. Y. Lu, and K. B. Tang, Synthesis and Characterization of Nanocrystalline Boron Nitride, Journal of Solid State Chemistry, vol.148, issue.2, pp.325-328, 1999.
DOI : 10.1006/jssc.1999.8454

L. Bourithis, S. Papaefthymiou, and G. D. Papadimitriou, Plasma transferred arc boriding of a low carbon steel: microstructure and wear properties, Applied Surface Science, vol.200, issue.1-4, pp.203-218, 2000.
DOI : 10.1016/S0169-4332(02)00901-7

L. H. Chiu, C. F. Yang, and W. C. Yang, Effect of contact pressure on wear resistance of AISI H13 tool steels with chromium nitride and hard chromium coatings, Surface and Coatings Technology, vol.154, issue.2-3, pp.282-288, 2002.
DOI : 10.1016/S0257-8972(02)00011-7

S. Fouvry and P. Kapsa, An energy description of hard coating wear mechanisms, Surface and Coatings Technology, vol.138, issue.2-3, pp.141-148, 2001.
DOI : 10.1016/S0257-8972(00)01161-0

H. Mohrbacher and J. P. Celis, Laboratory testing of displacement and load induced fretting, Tribology International, vol.28, issue.5, pp.269-278, 1995.
DOI : 10.1016/0301-679X(95)00005-O

J. Barralis and G. Maeder, « Précis Métallurgie : Elaboration, structures-propriétés, normalisation, pp.102-113, 1997.

C. Syrett and A. Acharya, « Corrosion and degradation of implant materials, éd. ASTM, pp.107-127, 1979.
DOI : 10.1520/STP684-EB

P. Peyre, X. Scherpereel, and G. Béranger, Surface modifications induced in 316L steel by laser peening and shot-peening. Influence on pitting corrosion resistance, Materials Science and Engineering: A, vol.280, issue.2, pp.294-302, 2000.
DOI : 10.1016/S0921-5093(99)00698-X

A. Conde, I. Garcia, and J. J. Damborenea, Pitting corrosion of 304 stainless steel after laser surface melting in argon and nitrogen atmospheres, Corrosion Science, vol.43, issue.5, pp.817-828, 2001.
DOI : 10.1016/S0010-938X(00)00114-1

C. T. Kwok, F. T. Cheng, and H. C. Man, Laser surface modification of UNS S31603 stainless steel. Part I: microstructures and corrosion characteristics, Materials Science and Engineering: A, vol.290, issue.1-2, pp.55-73, 2000.
DOI : 10.1016/S0921-5093(00)00929-1

K. T. Kwok, K. H. Lo, and F. T. Cheng, Effect of processing conditions on the corrosion performance of laser surface-melted AISI 440C martensitic stainless steel, Surface and Coatings Technology, vol.166, issue.2-3, pp.221-230, 2003.
DOI : 10.1016/S0257-8972(02)00782-X