Y. Akou, Etude expérimentale et modélisation de l'élargissement des remblais sur sols compressibles, 1995.

S. Amar, F. Baguelin, and Y. Canepa, Étude expérimentale du comportement des fondations superficielles, Annales de l'I, pp.91-100, 1984.

S. Amar and Y. Canepa, Fondations superficielles -Étude expérimentale sous charges statiques et cycliques, 15 ème International Conf. On Soil Mechanics and Found, Engng, pp.641-644, 2001.

J. R. Arthur, K. S. Chua, and T. Dunstan, Induced anisotropy in a sand, G??otechnique, vol.27, issue.1, pp.13-30, 1977.
DOI : 10.1680/geot.1977.27.1.13

J. R. Arthur, T. Dunstan, Q. Al-ani, and A. Assadi, Plastic deformation and failure in granular media, G??otechnique, vol.27, issue.1, pp.27-53, 1977.
DOI : 10.1680/geot.1977.27.1.53

J. R. Arthur, J. Robin, K. S. Chua, and . Rodriguez, Principal stress rotation : a missing parameter, Proc., American Society of Civil Engineering, N° GT4, pp.419-433, 1980.

J. H. Atkinson and G. Sällfors, Experimental determination of soil properties, 10 ème ECSMFE Firenze, pp.915-956, 1991.

F. Baguelin and J. Jézéquel, Le pressiomètre autoforeur, Suppl. Bull. LPC, vol.67, pp.9-30, 1973.

F. Baguelin and J. Jézéquel, Further insights on the self-boring technique developed in France, In situ measurement of soil properties, Rayleigh, American Society of Civil Engineering ASCE, issue.1, pp.231-243, 1975.

F. Baguelin, J. Jézéquel, and A. Le-mehauté, Mesure des caractéristiques des sols par autoforage, Bull. Liaison LPC ? 81, janv.-fév, pp.63-72, 1759.

F. Baguelin and J. Jézéquel, Le pénétromètre latéral autoforeur, 9 ème Cong, Int. ISMFE, Tokyo, vol.1, pp.27-30, 1977.

A. Balla, Stress conditions in triaxial compression Journal of the soil Mechanics and Foundations Division, American Society of Civil Engineering ASCE, vol.6, issue.12, pp.57-111, 1960.

M. M. Baligh, Strain Path Method, Journal of Geotechnical Engineering, vol.111, issue.9, pp.111-120, 1985.
DOI : 10.1061/(ASCE)0733-9410(1985)111:9(1108)

M. M. Baligh, A. S. Azzouz, and C. T. Chin, Disturbances Due to ???Ideal??? Tube Sampling, Journal of Geotechnical Engineering, vol.113, issue.7, pp.113-120, 1987.
DOI : 10.1061/(ASCE)0733-9410(1987)113:7(739)

L. P. Barden and M. Dermott, The use of free ends in triaxial testing of clays, Journal of the Soil Mechanics and Foundations American Society of Civil Engineering ASCE, vol.91, p.6, 1965.

B. Bescond and J. F. Serratrice, Comportement mécanique d'une marne en compression et en extension Fiche programme 1, pp.6-53, 1986.

J. Biarez, Contribution à l'étude des propriétés mécaniques des sols et des matériaux pulvérulents, 1962.

J. Biarez, P. Y. Hicher, G. Bigot, and J. C. Blivet, Elementary mechanics of soil behaviour, satured remoulded soils, Prélèvement des sols et des roches, pp.113-117, 1994.

A. W. Bishop, D. J. Henkel, and D. J. Henkel, The triaxial test The measurement of soil properties in the triaxial test, p.228, 1952.

A. W. Bishop and D. J. Henkel, The measurment of soil properties in the triaxial test The strength of soils as engineering materials, 6 th Rankine Lecture, pp.89-130, 1962.

A. W. Bishop, G. E. Green, V. K. Garga, A. Andersen, and J. D. Brown, A New Ring Shear Apparatus and Its Application to the Measurement of Residual Strength, G??otechnique, vol.21, issue.4, pp.273-328, 1971.
DOI : 10.1680/geot.1971.21.4.273

L. Bjerrum and A. Landva, Direct Simple-Shear Tests on a Norwegian Quick Clay, G??otechnique, vol.16, issue.1, pp.2-20, 1966.
DOI : 10.1680/geot.1966.16.1.1

F. Blondeau and J. Berche, Mesure des paramètres de résistance au cisaillement résiduelle, BLPC, vol.65, pp.43-48, 1973.

J. P. Boehler, Contribution théorique et expérimentale à l'étude des milieux plastiques anisotropes, thèse d'état, Institut de Mécanique de The shearing and dilatancy of sands, Grenoble Bolton M.D, pp.65-78, 1975.

D. Bouvard, Rhéologie de milieux pulvérulents : Etude expérimentale et identification d'une loi de comportement Extension of an elastoplastic double hardening model to viscoplasticity within the frame of finite strains, 1982.

P. Breul and R. Gourves, Reconnaissance géotechnique in situ par couplage de l'endoscopie et de l'essai de pénétration dynamique, 15 ème International Conf. On Soil Mechanics and Found, Engng, vol.1, pp.377-380, 2001.

B. B. Broms and A. O. Casbarian, Effect of rotation of the principal stress axes and of the intermediate principal stress on the shear strength, 6 International Conf. On Soil Mechanics and Found, pp.179-183, 1965.

M. Budhu, Simple shear deformation of sands Non uniformities imposed by simple shear apparatus, Cambridge Budhu M. Canadian Geotechnical Journal, vol.21, 1979.

J. B. Burland, Ninth Laurits Bjerrum Memorial Lecture: "Small is beautiful"???the stiffness of soils at small strains, Canadian Geotechnical Journal, vol.26, issue.4, pp.499-516, 1989.
DOI : 10.1139/t89-064

Y. Canepa and D. Depresles, Catalogue des essais de chargement de fondations superficielles réalisés sur sites par les LPC (1978-1990) (Laboratoire régional de l'Est parisien) rapport interne, p.211, 1990.

D. Carder and D. Bush, Briefing: Development and testing of load cell pressuremeter, Proceedings of the institution of Civil Engineers, pp.141-142, 2001.
DOI : 10.1680/geng.2001.149.3.141

B. Cazacliu, Comportement des sables en petites et moyennes déformations ? Prototype d'essai torsion compression confinement sur cylindre creux, 1996.

G. Chambon, A. Corfdir, P. Lerat, and J. Schmittbuhl, Essais à l'appareil de cisaillement simple annulaire, pp.259-264, 2002.

R. Chehade, J. C. Robinet, and I. Sharour, Dilatance et potentiel de liquéfaction dans les essais triaxiaux et de torsion, 12 International Conf. On Soil Mechanics and Found. Engng., Rio de Janeiro pp, pp.29-30, 1989.

R. Chehade, Contribution à l'étude du comportement des géomatériaux pulverulents sous des sollicitations rotationnelles (Réalisation d'un appareil de torsion, Thèse de doctorat à l'Université des Sciences et Technologies de Lille, 1989.

W. F. Chen, G. Y. Baladi, C. R. Clayton, and A. Siddique, Soil plasticity, theory and implementation, Developpements in geotechnical engineering Tube sampling disturbance-forgotten truths and new perspectives, Proc Inst. Civ. Engrs. Geotech. Engng, vol.38, issue.137, pp.127-135, 1985.

A. F. Collin and B. A. Smith, ENGINEERING RESEARCH. INSTITUTION RESEARCH COMMITTEE. SUB-COMMITTEE ON EARTH-PRESSURES. THE SHEARING RESISTANCE OF SOILS., Journal of the Institution of Civil Engineers, vol.3, issue.7, pp.333-343, 1846.
DOI : 10.1680/ijoti.1936.14832

J. Costet, G. Sanglerat, W. W. Crockford, and J. Sousa, Cours pratique de mécanique des sols Hollow cylinder specimen preparation : cohesive materials GTJ, American Society for Testing and Materials ASTM, vol.15, issue.3, pp.271-276, 1969.

J. C. Dalton and P. G. Hawkins, Some measurments of the in-situ stress in a meadow in the cambridgeshire coutryside, pp.415-438, 1982.

R. Deguillaume, Deux appareils d'essais de sol, Travaux, pp.322-326, 1948.

D. Ph, G. Jaeck, and D. Queyroi, Remblais sur sol mou renforcés par géotextiles Expérimentation de Guiche ? A 64, d'après thèse de Kemissa M. à l'ENPC Den Haan E Sample disturbance of a Soft Organic Dutch Clay, rapport GeoDelft mars Sample disturbance of a Soft Organic Oostvaardersplassen Clay, J. Den Haan E.J, vol.18, pp.49-55, 1990.

T. Doanh, Behaviour of Hostun sand under drained circular stress path, 2 nd Int, Symp. Of Num. Models in Geomechanics, pp.205-211, 1986.

T. Doanh, D. Benedetto, H. Golcheh, Y. Kharchafi, and M. , Non linear incremental constitutive equation: application to sands, Proceedings of the international Workshop on Constitutive Equations for Granular Non-cohesive soils, Saada & Bianchini eds, pp.255-273, 1989.
DOI : 10.1016/0148-9062(90)95118-K

G. T. Dounias and D. M. Potts, Numerical Analysis of Drained Direct and Simple Shear Tests, Journal of Geotechnical Engineering, vol.119, issue.12, pp.119-1870, 1993.
DOI : 10.1061/(ASCE)0733-9410(1993)119:12(1870)

D. C. Drucker, R. E. Gibson, and D. J. Henkel, Soil mechanics and work-hardening theories of plasticity, Transactions of the A, pp.338-346, 1957.

T. Dubreucq, Contribution à la modélisation du frottement sable/géotextiles, Rapport de recherche n°1, Mesures de contraintes totales dans les sols, 1997.

J. M. Duncan and H. B. Seed, Anisotropy and stress reorientation in clay, Journal of the soil Mechanics and Foundation Division Proceeding of the American Society of Civil Engineering, pp.92-97, 1966.

J. M. Duncan and H. B. Seed, Corrections for strength test data, Journal Geo. Eng. Div., American Society of Civil Engineering ASCE, pp.93-98, 1967.

H. Ejjaaouani, J. P. Magnan, . Shakhirev, and S. Mowgli, Comportement de sols gonflants à Ouarzazate, 2003.

M. U. Ergun, Evaluation of three-dimensionnal shear testing, 10 th International Conf. On Soil Mechanics and Found, Engng. Stockholm, vol.1, 1980.

J. Faugeras, L'essai de compressibilité des sols au pénétromètre statique et son interprétation sur modèle analogique, Thèse de doctorat de 3 ème cycle, p.125, 1979.

E. Flavigny, D. Magnan, and E. Muschotti, Utilisation d'un "EXPANSOL" pour l'étude des sols gonflants, Proc. X ECMSFE Deformation of soils and diplacements of structures, pp.87-90, 1991.

C. R. Foster and S. M. Fergus, Stress distribution in a homogeneous soil, Highway research Board, 1951.

S. Frydman, I. Alpan, and J. G. Zeitlen, Stress-deformation behavior of sand studied in hollow cylinder and triaxial apparatus 4 Asian CSMFE Bangkok, pp.17-23, 1971.

S. Fukushima and F. Tatsuoka, Deformation and strength of sand in torsional simple shear, Proc. IUTAM Conf. On Deformation and Failure of granular Materials, Delft, pp.371-379, 1982.

J. Garnier, E. Haza, and D. Th, Shallow foundation on geotextile-reinforced soil: a centrifuge model study International conference on geosynthetics, 7: State of the art. Recent developments, Proceedings, vol.1, pp.22-27, 2002.

J. Garnier, Modèles physiques en géotechnique Validation de la méthode et exemples d'applications. Revue Française de Géotechnique, pp.5-28, 2002.

H. Geoffroy, D. Benedetto, H. Sauzéat, C. Duttine, and A. , Deformation characteristics of Hostun sand and Toyoura sand in the quasi-elastic domain. PARAM, pp.275-282, 2002.

E. C. Geuze, T. Tjong-kie-ghionna, V. Jamiolkowski, M. Lacasse, S. Ladd et al., The mechanical behaviour of clays Evaluation of self-boring pressuremeter, Symp, Proceeding of 2° International Congress on Rheology situ testing, pp.293-301, 1952.

Y. Golchech, Etude de sollicitations rotationnelles sur une kaolinite Réalisation d'un, 1986.

G. E. Green and D. W. Reades, Boundary conditions, anisotropy and sample shape effects onthe stress-strain behaviour of sand in triaxial compression and plane strain, G??otechnique, vol.25, issue.2, pp.333-356, 1975.
DOI : 10.1680/geot.1975.25.2.333

P. Habib, Nouvelles recherches en mécanique des sols, Annales de l'ITBTP pp, p.28, 1951.

P. Habib, Influence de la variation de la contrainte principale moyenne sur la résistance au cisaillement des sols. 3 ème International Conf. On Soil Mechanics and Found, Engng, vol.1, pp.131-136, 1953.

P. Habib and L. Suklje, Étude de la stabilité des fondations sur une couche d'argile d'épaisseur limitée, Annales de l'ITBTP 83, pp.1148-1165, 1954.

P. Habib, Les surfaces de glissement en Mécanique des Sols, pp.7-24, 1984.

B. Halphen and J. Salençon, Elasto-plasticité Presse de l'ENPC, 1980.

S. Hayashi, H. Ochiai, A. Yoshimoto, K. Sato, and T. Kitamura, Functions and effects of renforcing materials in earth reinforcement -International geotechnical symposium on theory and practice of earth reinforcement, pp.99-104, 1988.

R. M. Haythorntrwaite, Discussion on failure hypotheses of soils, Research Conference on shear Strength of Cohesive Soils, American Society of Civil Engineering, p.987, 1961.

D. J. Henkel and G. D. Gilbert, The Effect Measured of the Rubber Membrane on the Triaxial Compression Strength of Clay Samples, G??otechnique, vol.3, issue.1, pp.13-20, 1952.
DOI : 10.1680/geot.1952.3.1.20

P. Y. Hicher, Comportement mécanique des argiles saturées sur divers chemins de sollicitations monotones et cycliques ? Application à une modélisation élastoplastique et viscoplastique, Thèse d'état, 1985.

P. Y. Hicher and P. V. Lade, Rotation of Principal Directions in K0???Consolidated Clay, Journal of Geotechnical Engineering, vol.113, issue.7, pp.774-788, 1987.
DOI : 10.1061/(ASCE)0733-9410(1987)113:7(774)

D. W. Hight, A. Gens, and M. J. Symes, The development of a new hollow cylinder apparatus for investigating the effects of principal stress rotation in soils, G??otechnique, vol.33, issue.4, pp.33-355, 1983.
DOI : 10.1680/geot.1983.33.4.355

D. W. Hight, A. Gens, and M. J. Symes, Undrained anisotropy and principal stress rotation in satured sand, géotechnique, pp.11-27, 1984.

D. W. Hight, Sampling effects in soft clay : an update, The 4 th Int, Geotec. Eng. Conf. Faculty of Engineering, p.41, 2000.

W. P. Hong and P. V. Lade, Elastoplastic behavior of Ko-consolidated clay in torsion shear tests Soils and foundations, pp.127-140, 1989.

J. Hvorslev, A ring shearing apparatus for the determination of the shearing resistance and plastic flow of soils, 1 st International Conf. On Soil Mechanics and Found, Engng, issue.2, pp.125-129, 1936.

J. Hvorslev, Subsurface exploration and sampling of soils for civil engineering purposes, Rapport, p.521, 1949.

J. Hvorslev and R. Kaufman, Torsion shear apparatus and testing procedures, Waterways experiment station, 1952.

I. Ishibashi and M. A. Sherif, Soil liquefaction by torsional simple shear device, American Society of Civil Engineering ASCE, vol.100, pp.8-871, 1974.

K. Ishihara and . Li, Liquefaction satured sand in triaxial torsion shear test, Japanese Society of Soil Mechanics and Foundation Engineering, pp.19-39, 1972.

K. Ishihara and S. Yasuda, Sand liquefaction in hollow cylinder torsion under irregular excitation Soils and foundations, pp.45-59, 1975.

K. Ishihara, M. Yoshimine, and W. Vargas, Effects of principal stress direction and intermediate principal stress on undrained shear behavior of sand, Soils and Foundations, vol.38, issue.3, pp.179-188, 1998.

M. Jamiolkowski, C. C. Ladd, J. T. Germaine, and R. Lancelotta, A new development in field and laboratory testing of soils, Proc. 11 th Int. Conf. On Soil Mechanics and Found. Engng, p.57, 1985.

R. J. Jardine, Investigations of pile-soil behaviour with special reference to the foundations of offshore structures, 1985.

R. J. Jardine, D. M. Potts, . St, H. D. John, and D. W. Hight, Some practical applications of a non-linear ground model, pp.223-228, 1991.

R. J. Jardine, L. Zdravkovic, and E. Porovic, Anisotropic consolidation including principal stress rotation experiments, results and practical implications 14 International Conf. On Soil Mechanics and Found, Engng, 1997.

J. Jézéquel, Essais in situ et fondations sur pieux, LCPC, pp.111-124, 1968.

J. Jézéquel, M. Pinel, and G. Ravilly, Pénétromètre électrique à mesure continue. Modification de la pointe pénétrométrique Gouda, BLPC, vol.36, pp.17-19, 1969.

J. Jézequel and J. Touzé, Sonde foreuse pressiométrique, Brevet d'invention N°1.596, 1970.

J. Jézéquel and L. Mehauté, Le pressiomètre autoforeur, FAER 1.05.22, p.61, 1979.

H. Josseaume, Construction d'une cellule triaxiale pour éprouvettes cylindriques creuses Fiche programme 1, pp.6-53, 1984.

H. Y. Ko and R. F. Scott, Deformation of sand at failure. Journal of the soil mechanics and foundations engineering division A, S.C.E, pp.94-98, 1968.

K. Kirkpatrick and W. M. , Contribution à l'étude du comportement des matériaux granulaires sous sollicitations rotationelles Thèse de Fluage et consolidation des sols saturés et quasi-saturés Analyse numérique Thèse de Doctorat ENPC Khemissa M Recherche expérimentales sur les propriétés mécaniques d'une argile molle naturelles The condition of failure for sand 4 International Conf, Thèse de Doctorat ENPC, pp.172-178, 1957.

W. Kjellman, Report on an apparatus for consummate investigation of the mechanical properties of soils, 1 st International Conf. On Soil Mechanics and Found, Engng, issue.2, pp.16-20, 1936.

W. Kjellman, Géotechnique, 1951.

F. Kögler, Baugrunprufung im Borloch, Der Bauingenieur, Berlin Heft N°, vol.19, p.20, 1933.

J. Koseki, S. Kawakami, H. Nagayama, and T. Sato, Change of small strain quasi-elastic deformation properties during undrained cyclic torsional shear and triaxial tests of Toyoura sand Soils and Foundations, pp.101-110, 2000.

J. Kuwano, Y. Imamura, M. Sakurai, K. Oganawa, and K. Ozaki, Simple shear test on sand reinforced by continuous fibers -V Congrés International des, 1994.

L. Gatta, residual strength of clay and clay shales by rotation shear test, 1970.

L. Rochelle and P. , Membrane drain and area correction in triaxial test on soil sample failing along a single shear plane 3 rd Pan American CSMFE Venezuela pp, pp.273-293, 1967.

L. Rochelle, P. Sarrailh, J. Tavenas, F. Roy, M. Leroueil et al., Causes of sampling disturbance and design of a new sampler for sensitive soils, Canadian Geotechnical Journal, vol.18, issue.1, pp.52-66, 1981.
DOI : 10.1139/t81-006

C. C. Ladd, R. B. Bovee, L. Edgers, and J. J. Rixner, Consolidated-Undrained Plane Strain Shear Tests on Boston Blue Clay, Research in Earth Physics (sponsored by U.S. Army Corps of Engineers), M.I.T. Department of Civil Engineering Research Report R-71-13, 1971.

P. Lade and D. J. , Cubical triaxial tests on cohesionless soil, International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, vol.11, issue.3, pp.99-793, 1973.
DOI : 10.1016/0148-9062(74)91579-4

P. V. Lade, Torsion shear tests on cohesionless soil, 5 th Panam Conference, Buenos Aires, vol.1, 1975.

P. V. Lade, Interpretation of torsion shear tests on sand, procceding of 2 nd international conference on Numerical Methods ion Geomechanics Blackburg U.S.A, 1976.

P. V. Lade, Elastoplastic stress-strain theory for cohesionless soil with curved yield surface, pp.1019-1035, 1977.

P. V. Lade, Membrane penetration effects in undrained tests, J.Geot. Engng. Proc. Of the American Society of Civil Engineering, vol.103, 1977.

P. V. Lade, Torsion shear apparatus for soil testing Laboratory shear strength of soil American Society for Testing and, Materials, vol.740, pp.145-163, 1981.

P. V. Lade and H. Ochiai, Three dimensional behaviour of sand with anisotropic fabric, J. of Geot. Engng., American Society of Civil Engineering ASCE, vol.109, issue.10, pp.1313-1328, 1983.

J. R. Lambrechts and J. J. Rixner, Comparison of Shear Strength Values Derived from Laboratory Triaxial, Borehole Shear, and Cone Penetration Tests, American Society for Testing and Materials, STP, vol.740, pp.551-565, 1980.
DOI : 10.1520/STP28770S

J. Lanier, Étude expérimentale des lois de comportement en grandse déformations à l'aide d'une presse réellement tridimensionnelle, Cahier du groupe fançais de Rhéologie, pp.53-57, 1976.

J. Lanier and Z. Zitouni, 3D behaviour of sands : tests performed with the Grenoble true triaxial apparatus. Int. Workshop on constitutive equations for granular non-cohesion soils Mode opératoire : Essai triaxial Leflaive Appareil perfectionné de mesures rhéologiques, Brevet d'invention N°1.518 Experimental analysis of mobilized friction between sand and reinforcing element using ring simple shear tests, International Symposium on Earth Reinforcement (IS Kyushu '96), 1967.

S. Leroueil, F. Tavenas, F. Brucy, L. Rochelle, P. Roy et al., Behaviour of destructed natural clays, American Society of Civil Engineering, Journal of the Geotechnical Engineering Division, vol.105, issue.6, pp.759-778, 1979.

S. Leroueil, F. Tavenas, L. Rochelle, P. Tremblay, and M. , Influence of filter paper and leakage on triaxial testing, ASTM. Special Technical Publication; STP 977, Symposium on advanced triaxial testing of soil and rock, pp.189-201, 1986.

J. Linderberg and H. L. Koning, Critical density of sand, Geotechnique 31, pp.231-245, 1981.

&. Lo and . Morin, Strength Anisotropy and Time Effects of Two Sensitive Clays, Canadian Geotechnical Journal, vol.9, issue.3, pp.261-267, 1972.
DOI : 10.1139/t72-030

W. Lode, Versuche ???ber den Einflu??? der mittleren Hauptspannung auf das Flie???en der Metalle Eisen, Kupfer und Nickel, Zeitschrift f???r Physik, vol.36, issue.11-12, p.913, 1926.
DOI : 10.1007/BF01400222

G. M. Lomize and G. I. Kravtosv, Field investigations of stress-strain state for loess foundations under axis-symmetrical conditions, Soil Mechanics and Foundation Engineering, vol.6, issue.3, pp.3-6, 1969.
DOI : 10.1007/BF01704955

G. M. Lomize, A. L. Kryzhanovsky, E. I. Vorontsov, and A. L. Goldin, Study of deformation and strength of soils under three dimensionnal state of stress, 7 International Conf. On Soil Mechanics and Found, pp.257-265, 1969.

G. M. Lomize, A. L. Kryzhanovsky, and V. F. Petryanin, Development patterns of the stressstrain state of a sandy foundation bed during two-dimensional deformation, pp.4-7, 1972.

B. Loret, Elastoplasticité à simple potentiel, Manuel de Rhéologie des Géomatériaux Presses de l 'ENPC, pp.153-187, 1987.

B. Loret, Application de la théorie des multimécanismes à l'étude du comportement des sols, Manuel de Rhéologie des Géomatériaux Presses de l 'ENPC, pp.189-214, 1987.

T. Lunne, S. Lacasse, and N. S. Rad, General report : SPT, CPT, pressuremeter testing and recent developpements in in situ testing, 12 ème International Conf. On Soil Mechanics and Found, pp.2339-2362, 1984.

A. J. Lutenegger and G. R. Hallberg, Borehole Shear Test in Geotechnical Investigations, pp.566-579, 1980.
DOI : 10.1520/STP28771S

Y. Maeda, G. Xu, K. Uno, H. Ochiai, M. Sakate et al., A new self boring in-situ friction testing technique, Geotechnical site characterization, pp.831-836, 1998.

J. Magnan, S. Shahanguian, and H. Josseaume, Étude en laboratoire des états limites d'une argile molle organique RFG, pp.13-19, 1982.

J. P. Magnan, Validation des méthodes de calcul des déformations des sols mous par comparaison avec le comportement des ouvrages, pp.47-83, 1989.

. Marchetti, A new in situ test for the measurement of horizontal soil deformability, In situ measurement of soil properties, American Society of Civil Engineering ASCE, pp.231-243, 1975.

H. Matsuoka and H. Koyama, A constitutive model of sands under cyclic shear stresses, Int. Conf. Soil Mech. found. Engng, 1985.

K. Meftah and J. Magnan, Anisotropie de la résistance, de la déformabilité et de la perméabilité des sols. Etat des connaissances, rapport des laboratoire, série géotezchnique GT31, 101 pages Ménard L, p.3, 1955.

C. O. Menkiti, Behaviour of clay and clayey-sand, with particular reference to principal stress rotation PhD Thesis Imperial, 1995.

M. Ph, Lois de comportement des géomatériaux et modélisation par la méthode des éléments finis, Etudes et recherches des laboratoires des Ponts et Chaussées Série Géotechnique GT52 193, 1993.

M. Ph and R. Ph, Modules de déformation en mécanique des sols : définitions, détermination et incertitude, pp.393-400, 2002.

S. Miura and S. Toki, A sample preparation method and its effect on static and cyclic deformation-strngth properties of sand, Soils and Foundations, pp.58-77, 1982.

K. Miura, S. Toki, and . Miura, Deformation prediction for anisotropic sand during the rotation of principal stress axes, Soils and Foundations, pp.42-56, 1986.

F. Molenkamp, Principle of axial shear apparatus, G??otechnique, vol.48, issue.3, pp.427-431, 1998.
DOI : 10.1680/geot.1998.48.3.427

A. Mouratidis and J. P. Magnan, Modèle elastoplastique anisotrope avec ecrouissage pour les argiles molles naturelles : Mélanie, pp.55-62, 1983.

Z. Mróz, V. A. Norris, and O. C. Zienkiewicz, Application of an anisotropic hardening model in the analysis of elasto???plastic deformation of soils, G??otechnique, vol.29, issue.1, pp.1-34, 1979.
DOI : 10.1680/geot.1979.29.1.1

Z. Mróz, V. A. Norris, and O. C. Zienkiewicz, An anisotropic, critical state model for soils subject to cyclic loading, G??otechnique, vol.31, issue.4, pp.451-469, 1981.
DOI : 10.1680/geot.1981.31.4.451

H. Muhs and K. Weis, Sohlreibung und grenztragfähigkeit unter lotreecht und schräg Belasteten Einzelfundamenten, Mitteilungen der DEGEBO Development of a new hollow cylinder apparatus for generalised stress path testing, Grounf Engineering, pp.26-28, 1969.

H. Ochiai, . Lade, and . Pv, Three???Dimensional Behavior of Sand with Anisotropic Fabric, Journal of Geotechnical Engineering, vol.109, issue.10, pp.1313-1328, 1983.
DOI : 10.1061/(ASCE)0733-9410(1983)109:10(1313)

. Oda, Anisotropic strength of cohesionless sands, J. of Geot. Engng Div. Proc. Of the American Society of Civil Engineering, vol.107, p.9, 1981.

J. Orsi, L'autoforage et le frottement latéral de pieux. Etude théorique de l'essai à la sonde frottante, p.167, 1978.

G. Philipponnat, Le Phicomètre : essai de cisaillement in situ, Revue Française de Géotechnique, pp.46-65, 1986.

G. Philipponnat, Le Phicomètre, analyse de 200 essais de cisaillement in situ, Annales de l'ITBTP, pp.66-87, 1987.

M. Piyal and J. Magnan, Paramètres d'élasticité anisotrope de l'argile molle organique de Cubzac-les-Ponts à l'état surconsolidé, 1984.

D. M. Potts, G. T. Dounias, and P. R. Vaughan, Finite element analysis of the direct shear box test, G??otechnique, vol.37, issue.1, pp.11-23, 1987.
DOI : 10.1680/geot.1987.37.1.11

H. G. Poulos and E. H. Davis, Elastic solutions for soil and rock mechanics, Series un soil engineering, p.411, 1974.

S. J. Poulos, Discussion of soil testing practics, Laboratory shear strength of soil, American Society for Testing and Materials ASTM, pp.659-666, 1981.

D. Queyroi, F. Saint-amand, and J. P. Magnan, Les remblais d'essai de drains verticaux de l'autoroute A 64 de Guiche (Vallée de l'Adour), pp.57-72, 1991.

D. W. Reads and G. E. Green, Independent stress control and triaxial extension tests on sand, G??otechnique, vol.26, issue.4, pp.551-576, 1976.
DOI : 10.1680/geot.1976.26.4.551

R. Ph, Cahier des charges, Pilotage en chemin de contrainte avec le logiciel Labview ® , Rapport interne, CT24, Fiche programme 2.24.32, p.59, 1998.

R. Ph and S. Borel, Proposition d'une nouvelle technique d'essai in situ : l'appareil triaxial in situ, pp.295-302, 2002.

R. Ph and K. Nasreddine, Cylindre creux et détermination de paramètres de lois de comportement des sols, pp.303-312, 2002.

R. J. Golcheh, Y. Deffayet, M. Fau, and D. , Appareil de cisaillement des sols par torsion d'un cylindre creux, 1983.

K. H. Roscoe, An apparatus for the application of simple shear to soil samples, Proceedings of the 3 rd International Conference on Soil Mechanics and Foundations Engineering, pp.24186-191, 1953.

K. H. Roscoe, A. N. Schofield, and C. P. Wroth, On the yielding of soils Géotechnique 8, pp.22-53, 1958.

K. H. Roscoe, A. N. Schofield, and A. Thurairajah, An evaluation of tets data for selecting a yield crieterion for soils, Laboratory Testing of Soils, American Society for Testing and Materials ASTM, vol.361, pp.111-128, 1963.

K. H. Roscoe, R. H. Basett, and E. R. Cole, Principal axes observed during simple shear of sand, Proceedings of the Geotechnical Conf, pp.231-237, 1967.

P. W. Rowe, The realation between shear strength of sands in triaxial compression, planestrain and sirect shear, pp.75-86, 1969.

A. S. Saada and A. K. Baah, Deformation and failure of a cross anisotropic clay under combined stresses 3 rd, Pan American CSMFE Caracas Venezuela, vol.1, pp.67-88, 1967.

A. S. Saada, A pneumatic computer for testing cross anisotrpic materials, American Society for Testing and Materials ASTM Journal of the Mechanics and Foundations Division, vol.8, issue.1, pp.17-23, 1968.

A. S. Saada and K. K. Zamani, The mechanical behaviour of cross anisotropic clays 7, 1969.

A. S. Saada and C. D. Ou, Strain-stress relations and failure of anisotropic clays Jour, SMFD American Society of Civil Engineering, pp.99-111, 1973.

A. S. Saada and G. F. Bianchini, Strength of one dimensionally consolidated clays, Jour. G.E.D. American Society of Civil Engineering, vol.101, pp.11-1151, 1975.

A. S. Saada and F. C. Townsed, Laboratory shear testing of soils, American Society for Testing and Materials, STP 740, Eds American Society for Testing and Materials ASTM, vol.1, pp.7-77, 1981.

A. S. Saada, G. Fries, and C. C. Ker, An evaluation of laboratory strength testing technics in soil mechanics, soil and found, pp.98-112, 1983.

A. S. Saada, Brief discussion on the stress distribution in the simple shear device; Int. Conference on advances in geot, Earthquake Engng ROLA, vol.3, pp.911-915, 1987.

A. S. Saada, Hollow cylinder torsional devices: their advantages and limitations, Advanced triaxial testing of soils and rocks, American Society for Testing and Materials STP977, pp.766-795, 1988.

C. Sauzéat, D. Benedetto, H. Chau, B. Pham-van-bang, and D. , A rheological model for the viscous behaviour of sand, Deformation Characteristics of, pp.1201-1209, 2003.

A. Schofield, P. Wroth, R. Shirdam, R. M. Faure, and J. P. Magnan, Critical state soil mechanics Mc Graw Hill London 306 pages Shahanguian Détermination expérimentale des courbes d'état limite de l'argile organique des Cubzac-les-Ponts, LCPC, Rapport de recherche LPC Caractérisation des éboulis de pente à l'aide d'une grande boîte de cisaillement, Symposium International : Sols Indures et Roches Tendres, 1968.

A. W. Skempton, Residual strength of clays in landslides, folded strata and the laboratory, G??otechnique, vol.35, issue.1, pp.3-18, 1947.
DOI : 10.1680/geot.1985.35.1.3

M. A. Stroud, The behavior of sands at low stress levels in the simple shear apparatus, 1971.

L. Suklje and J. Drnovsek, Investigation of the tensile deformability of soils using hollows cylinders 6 International Conf. On Soil Mechanics and Found, pp.368-372, 1965.

H. B. Sutherland and M. S. Mesdary, The influence of the principal intermediate stress on strength of sand, 7 ème International Conf. On Soil Mechanics and Found, pp.391-399, 1969.

M. J. Symes, Rotation of principal stress in sand, 1983.

M. J. Symes, A. Gens, and D. W. Hight, Undrained anisotropy and principal stress rotation in saturated sand, G??otechnique, vol.34, issue.1, pp.11-27, 1984.
DOI : 10.1680/geot.1984.34.1.11

M. J. Symes, A. Gens, and D. W. Hight, Drained principal stress rotation in satured sand, pp.59-81, 1987.

K. Tani, General report : Measurement of shear deformation of geomaterials ? Field tests Prefailure deformation of geomaterials, pp.1115-1131, 1995.

F. Tatsuoka, M. Muramatsu, and T. Sasaki, Cyclic undrained stress-strain behavior of dense sands by torsional simple shear test., SOILS AND FOUNDATIONS, vol.22, issue.2, pp.55-70, 1982.
DOI : 10.3208/sandf1972.22.2_55

F. Tatsuoka, R. J. Jardine, L. Presti, D. , D. Benedetto et al., Characterising the prefailure deformation properties of geomaterials 14 International Conf. On Soil Mechanics and Found. Engng, pp.1-36, 1997.

F. Tavenas and S. Leroueil, Effects of stresses and time on yielding of clays, International conference on soil mechanics and foundation engineering, Proceedings, vol.9, issue.1, pp.319-326, 1977.

F. Tavenas and S. Leroueil, Les concepts d'état limite et d'état critique et leurs applications pratiques à l'étude des argiles Revue Française de Géotechnique N°, pp.27-49, 1979.

F. Tavenas and S. Leroueil, Laboratory and in situ stress-strain-time behaviour of soft clay : state of the art, Proceedings of the Int. Symp. On Geot. Engng. Og Soft Soils, pp.3-48, 1987.

Y. Tcheng, Quelques recherches de mécanique des sols Fondations superficielles, Annales de l'ITBTP 110, pp.137-143, 1957.

Y. Tcheng, Modèles hydrauliques de fondations, 9 ème International Conf. On Soil Mechanics and Found, Engng, issue.1, pp.769-772, 1977.

I. Towhata and K. Ishihara, Undrained strength of sand undergoing cyclic rotation of principal stress axes Soils and foundations, pp.135-147, 1985.

I. Towhata and K. Ishihara, Shear work and pore water pressure in undrained shear, Soils and foundations, pp.78-847, 1985.

N. A. Tsytovich and Z. K. Ju, Prediction of settlement rate of structure bases, 1967.

Y. P. Vaid and R. G. Campanella, Triaxial and plane strain behavior of natural clay, Journal Geo. Eng. Div., American Society of Civil Engineering ASCE, pp.100-103, 1974.

N. Vallé, Comportement mécanique d'un sol grossier d'une terrasse alluvionnaire de la Seine, 2001.

M. Vucetic and S. Lacasse, Specimen size effect in simple shear test -Journal of the Geotechnical Engineering Division, pp.108-120, 1982.

R. K. Wong and J. R. Arthur, Sand sheared by stresses with cyclic variations in direction, G??otechnique, vol.36, issue.2, pp.215-226, 1986.
DOI : 10.1680/geot.1986.36.2.215

C. P. Wroth and J. M. Hughes, An instrument of the in situ measurment of the properties of soft clays, Proceedings of the 8 th, pp.487-494, 1973.

Y. Yamada and K. Ishihara, Anisotropic deformation characteristics of sand under three dimensional stress conditions., SOILS AND FOUNDATIONS, vol.19, issue.2, pp.79-94, 1979.
DOI : 10.3208/sandf1972.19.2_79

Y. Yamada and K. Ishihara, Anisotropic deformation characteristics under 3D stress conditions. Soils and Found, p.3, 1979.

R. N. Yong and V. Silvestri, Anisotropic behaviour of a sensitive clay, Canadian Geotechnical Journal, vol.16, issue.2, pp.335-350, 1979.
DOI : 10.1139/t79-033

Y. Yoshimi and T. Kishida, A ring torsion apparatus for evaluating friction between soil and metal surfaces, GTJ American Society for Testing and Materials ASTM, vol.16, issue.3, pp.296-303, 1993.

L. Zdravkovic, The stress-strain-strength anisotropy of a granular medium under general stress conditions PhD Thesis Imperial, 1996.

L. Zdravkovic, Some anisotropic stiffness characteristics of a silt under general stress consitions, pp.407-437, 1997.

L. Zdravkovic, R. Jardine, and E. Porovic, Anisotropic consolidation including principal stress axis rotation : experiments, results and practical implications, 14 th Int, Conf. On Soil Mechanics & Found. Engng, vol.4, pp.2165-2168, 1999.

L. Zdravkovic and J. Jardine, Undrained anisotropy of K 0 consolidated silt, Can. Geotech, J, vol.37, pp.178-200, 2000.

L. Zdravkovic and R. Jardine, The effect of anisotropy of rotating the principal stress axes during con,solidation, Geotechnique, pp.69-83, 2001.