H. N. Ahmad, H. Ahmad, J. Combeau, T. Desbiolles, G. Jalanti et al., Numerical simulation of macrosegregation: a comparison between finite volume method and finite element method predictions and a confrontation with experiments, Metallurgical and Materials Transactions A, vol.9, issue.2, pp.617-630, 1998.
DOI : 10.1007/s11661-998-0143-9

. Aliaga, Charles Aliaga Simulation numérique par éléments finis en 3D du comportement thermomécanique au cours du traitement thermique d'aciers: application à la trempe de pièces forgées ou coulées, 2000.

H. D. Arnold, F. Arnold, M. Brezzi, and . Fortin, A stable finite element for the Stokes equations. Calcoco, pp.337-344, 1984.

M. Barkhudarov, H. You, J. Ortega, J. Beech, S. B. Chin et al., Experimental validation and development of Flow-3D for casting problems, Proc. VI Int. Conf. on Modeling of Casting, Welding and Advanced Solidification Processes. T.S.Piwonka, V.Voller and L.Katgerman, TMS, pp.423-434, 1993.

C. Beckermann and R. Viskanta, Double diffusive convection during dendritic solidification of a binary mixture, pp.195-213, 1988.

]. C. Beckermann and . Beckermann, Modeling of macrosegregation: past, present and future, Flemings Symposium, 2000.

H. M. Bellet, F. Bellet, M. Decultieux, F. Menai, C. Bay et al., Thermomechanics of the cooling stage in casting processes: 3D finite element analysis and experimental validation, Met. Trans., B, pp.81-100, 1996.

H. M. Bellet, V. D. Bellet, and . Fachinotti, ALE method for solidification modelling, Computer Methods in Applied Mechanics and Engineering, vol.193, issue.39-41, pp.4355-4381, 2004.
DOI : 10.1016/j.cma.2003.11.016
URL : https://hal.archives-ouvertes.fr/hal-00531192

W. D. Bennon and F. P. Incropera, A continuum model for momentum, heat and species transport in binary solid-liquid phase chang systems -I. Model formulation, Int. J. Heat Mass Transfer, pp.2161-2170, 1987.

W. D. Bennon and F. P. Incropera, The evolution of macrosegregation in statically cast binary ingots, Metallurgical Transactions B, vol.1, issue.3, pp.611-616, 1987.
DOI : 10.1007/BF02654275

H. Bousquet-melou, B. Bousquet-melou, M. Goyeau, F. Quintard, D. Fichot et al., Average momentum equation for interdendritic flow in a solidifying columnar mushy zone, International Journal of Heat and Mass Transfer, vol.45, issue.17, pp.3651-3665, 2002.
DOI : 10.1016/S0017-9310(02)00077-7

K. C. Chiang and H. L. Tsai, Shrinkage-induced fluid flow and domain change in two-dimensional alloy solidification, International Journal of Heat and Mass Transfer, vol.35, issue.7, pp.1763-1770, 1992.
DOI : 10.1016/0017-9310(92)90146-J

K. C. Chiang and H. L. Tsai, Interaction between shrinkage-induced fluid flow and nature convection during alloy solidification, Int. J. Heat Mass Transfer, issue.7, pp.1771-1778, 1992.
DOI : 10.1016/0017-9310(92)90147-k

H. Combeau, B. Appolaire, and G. Lesoult, Recent progress in understanding and prediction of macro and mesosegregation. Modeling of Casting, Welding and Advanced Solidification Processes-VIII, TMS, Thomas and C. Beckermann, pp.245-256, 1998.

. Costes, Frédéric Costes Modélisation thermomécanique tridimensionnelle par élément finis de la coulée continue d'aciers, Thèse de doctorat, 2004.

T. Coupez, Grandes transformations et remaillage automatique, Thèse de doctorat, 1991.

]. M. Crisfield and . Crisfield, Accelerated solution techniques and concrete cracking, Computer Methods in Applied Mechanics and Engineering, vol.33, issue.1-3, pp.585-607, 1982.
DOI : 10.1016/0045-7825(82)90124-4

J. L. Desbiolles, P. Thevoz, and M. Rappaz, Micro-/macrosegregation modeling in casting: a fully coupled 3D model, Proc. of Modeling of Casting, Welding and Advanced Solidification Processes X, TMS, pp.245-252, 2003.

G. Davis, Natural convection of air in a square cavity: A bench mark numerical solution, International Journal for Numerical Methods in Fluids, pp.249-264, 1983.

. Ehlen, Free surface model to predict the influence of shrinkage cavities on the solute redistribution in castings, Proc. IX Int. Conf. on Modeling of Casting, Welding and Advanced Solidification Processes, Peter R.Sahm, Preben N.Hansen and James G.Conley, TMS, pp.633-639, 2000.

V. D. Fachinotti and M. Bellet, A Diffusion-Split Method To Deal With Thermal Shocks Using Standard Linear Tetrahedral Finite Elements, AIP Conference Proceedings, pp.2258-2263, 2004.
DOI : 10.1063/1.1766871
URL : https://hal.archives-ouvertes.fr/hal-00531257

S. D. Felicelli, J. C. Heinrich, and D. R. Poirier, Simulation of freckles during vertical solidification of binary alloys, Metallurgical Transactions B, vol.10, issue.6, pp.847-859, 1991.
DOI : 10.1007/BF02651162

S. D. Felicelli, D. R. Poirier, and J. C. Heinrich, Three-dimensional simulations of freckles in binary alloys, Journal of Crystal Growth, vol.191, issue.4, pp.879-888, 1998.
DOI : 10.1016/S0022-0248(98)00357-1

]. M. Flemings and . Flemings, Solidification processing, pp.31-35, 1974.
DOI : 10.1002/9783527603978.mst0173

M. Fortin and A. Fortin, Newer and newer element for incompressible flow. Finite element in fluids, pp.171-187, 1985.

P. Jean, F. , and P. George, Maillages, applications aux éléments finis, 1999.

. Fries, Thomas-Peter Fries HW DO. A Review of Petrov-Galerkin Stabilization Approaches and an Extension to Meshfree Methods. http://opus.tubs .de/opus/volltexte Predicting freckle-defects in directionally solidified Pb-Sn alloys, Materials Science and Engineering, vol.549, pp.245-255, 2002.

. Fujii, Macrosegregation in a multicomponent low alloy steel, Metallurgical Transactions B, vol.1, issue.3, pp.331-339, 1979.
DOI : 10.1007/BF02652503

S. Ganesan and D. R. Poirier, Conservation of mass and momentum for the flow of interdendritic liquid during solidification, Metallurgical Transactions B, vol.18, issue.1, pp.173-181, 1990.
DOI : 10.1007/BF02658128

L. Gaston, Simulation numérique par éléments finis bidimensionnels du remplissage de moules de fonderie et étude expérimentale sur maquette hydraulique, Thèse de doctorat, 1997.

L. Gaston, Résolution numérique par éléments finis d'un modèle de solidification pour alliages métalliques multiconstitués, 1999.

]. U. Ghia, K. N. Ghia, C. T. Ghia, and . Shin, High-Re solutions for incompressible flow using the Navier-Stokes equations and a multigrid method, Journal of Computational Physics, vol.48, issue.3, pp.387-411, 1982.
DOI : 10.1016/0021-9991(82)90058-4

]. W. Gray and . Gray, A derivation of the equations for multi-phase transport, Chemical Engineering Science, vol.30, issue.2, pp.229-233, 1975.
DOI : 10.1016/0009-2509(75)80010-8

]. W. Gray and . Gray, General conservation equations for multi-phase systems: 4. Constitutive theory including phase change, Advances in Water Resources, vol.6, issue.3, pp.130-140, 1983.
DOI : 10.1016/0309-1708(83)90025-8

C. Gruau, Génération de métriques pour adaptation anisotrope de -174- maillages, applications à la mise en forme des matériaux, Thèse de doctorat, 2004.

J. P. Gu and C. Beckermann, Simulation of convection and macrosegregation in a large steel ingot, Metallurgical and Materials Transactions A, vol.15, issue.5, pp.1357-1366, 1999.
DOI : 10.1007/s11661-999-0284-5

J. Guo and C. Beckermann, Three dimensional simulation of freckle formation during binary alloy solidification: effect of mesh spacing. Numerical Heat Transfer, pp.559-576, 2003.

M. Hassanizadeh and W. G. Gray, General conservation equations for multiphase systems: 1. Averaging procedure, Adv. Water Resources, pp.131-144, 1979.

D. J. Hebditch and J. D. Hunt, Observations of ingot macrosegregation on model systems, Metallurgical Transactions, vol.4, issue.7, pp.1557-1564, 1974.
DOI : 10.1007/BF02646326

A. Heinrich, Modélisation thermomécanique de la coulée continue d'acier en deux dimensions, Thèse de doctorat, 2003.

T. J. Hughes and A. Brooks, A multi-dimensional upwind scheme with no cross wind diffusion, in Finite Elements for Convection Dominated Flows, 1979.

O. Jaouen, Modélisation tridimensionnelle par éléments finis pour l'analyse thermo-mécanique du refroidissement des pièces coulees, 1998.

U. Thomas and . Kämpfer, Modeling of macrosegregation using an adaptive domain decomposition method, Thèse de doctorat, 2002.

R. J. Kim, S. T. Kim, and . Ro, Shrinkage Formation During the Solidification Process in an Open Rectangular Cavity, Journal of Heat Transfer, vol.115, issue.4, pp.1078-1081, 1993.
DOI : 10.1115/1.2911369

H. S. Kou, D. R. Kou, M. C. Poirier, and . Flemings, Macrosegregation in Rotated Remelted Ingots, Metallurgical Transactions B, vol.7, issue.4, pp.711-719, 1978.
DOI : 10.1007/BF03257222

P. F. Kozlowski, B. G. Thomas, J. A. Azzi, and H. Wang, Simple constitutive equations for steel at high temperature, Metallurgical Transactions A, vol.5, issue.6, pp.903-918, 1992.
DOI : 10.1007/BF02675567

H. J. Kron, M. Kron, A. Bellet, B. Ludwig, J. Pustal et al., Comparison of numerical simulation models for predicting temperature in solidification analysis with reference to air gap formation, International Journal of Cast Metals Research, vol.14, issue.5, pp.295-310, 2004.
DOI : 10.1016/S0065-2156(08)70009-7
URL : https://hal.archives-ouvertes.fr/hal-00576280

]. W. Liu and . Liu, Computation of macrosegregation in R2SOL. CEMEF report for the OSC project, 2003.

R. Mehrabian, M. Keane, and M. C. Flemings, Interdendritic fluid flow and macrosegregation, influence of gravity, Metall. Trans, pp.1209-1220, 1970.

M. Menaï, Simulation numérique tridimensionnelle du refroidissement des pièces en fonderie: approche thermomécanique, Thèse de doctorat, 1995.

J. Mencinger, Numerical simulation of melting in two-dimensional cavity using adaptive grid, Journal of Computational Physics, vol.198, issue.1, pp.243-264, 2004.
DOI : 10.1016/j.jcp.2004.01.006

]. G. Naterer and . Naterer, Simultaneous pressure-velocity coupling in the two-phase zone for solidification shrinkage in an open cavity. Modelling Simul, Mater. Sci. Eng, pp.595-613, 1997.

]. J. Ortega and . Ortega, Marix theory, 1970.

E. Perchat, Mini-élément et factorisations incomplètes pour la parallélisation d'un solveur de Stokes 2D, 2000.

]. E. Pichelin and . Pichelin, Calcul par éléments finis du remplissage 3D pour des fluides visqueux incompressibles. Application à l'injection, 1998.

C. Prakash and V. Voller, ON THE NUMERICAL SOLUTION OF CONTINUUM MIXTURE MODEL EQUATIONS DESCRIBING BINARY SOLID-LIQUID PHASE CHANGE, Numerical Heat Transfer, Part B: Fundamentals, vol.15, issue.2, pp.171-189, 1989.
DOI : 10.1016/0017-9310(87)90317-6

H. P. Prescott, F. P. Prescott, W. D. Incropera, and . Bennon, Modeling of dendritic solidification systems: reassessment of the continuum momentum equation, Int. J. Heat Mass Transfer, pp.2351-2359, 1991.

M. Putti and C. Cordes, Finite Element Approximation of the Diffusion Operator on Tetrahedra, SIAM Journal on Scientific Computing, vol.19, issue.4, pp.1154-1168, 1998.
DOI : 10.1137/S1064827595290711

. Rabia, Boubeker Rabia La formation des structures équiaxes: mouvement des grains, croissance-refusion, consequences sur les macroségrégations, Thèse de doctorat, 2004.

H. M. Rappaz, M. Rappaz, M. Bellet, and . Deville, Numerical modeling in materials science and engineering, 2002.
DOI : 10.1007/978-3-642-11821-0
URL : https://hal.archives-ouvertes.fr/hal-00510518

H. S. Ridder, S. Ridder, R. Kou, and . Mehrabian, Effect of fluid flow on macrosegregation in axi-symmetric ingots, Metallurgical Transactions B, vol.1, issue.3, pp.435-447, 1981.
DOI : 10.1007/BF02654312

H. F. Roch, H. Roch, J. Combeau, G. Chevrier, and . Lesoult, Numerical model for prediction of the final composition and pipe formation of heavy steel ingots, Proc. 5th Int. Conf. on Modeling of Casting, Welding and Advanced Solidification Processes. M. Rappaz, M.R. Ozgü and K.W. Mahin, TMS, pp.789-795, 1991.

H. A. Saleeb, T. E. Saleeb, W. Wilt, and . Li, An Implicit integration scheme for generalized viscoplasticity with dynamic recovery, Computational Mechanics, vol.21, issue.6, pp.429-440, 1998.
DOI : 10.1007/s004660050322

H. F. Shakib, T. J. Shakib, Z. Hughes, and . Johan, A new finite element formulation for computational fluid dynamics: X. The compressible Euler and Navier-Stokes equations, Computer Methods in Applied Mechanics and Engineering, vol.89, issue.1-3, pp.141-219, 1991.
DOI : 10.1016/0045-7825(91)90041-4

J. C. Simo and R. L. Taylor, Consistent tangent operators for rate-independent elastoplasticity, Computer Methods in Applied Mechanics and Engineering, vol.48, issue.1, pp.101-118, 1985.
DOI : 10.1016/0045-7825(85)90070-2

B. Szabó and I. Babu?ka, Finite element analysis, 1991.

T. E. Tezduyar and Y. J. Park, Discontinuity capturing finite element formulations for nonlinear convection-diffusion-reaction problems, Comput. Methods Appl. Mech. Engrg, pp.307-325, 1986.
DOI : 10.1016/0045-7825(86)90003-4

T. E. Tezduyar, S. Mittal, S. E. Ray, and R. Shih, Incompressible flow computations with stabilized bilinear and linear equal-order-interpolation velocity-pressure elements, Computer Methods in Applied Mechanics and Engineering, vol.95, issue.2, pp.221-242, 1992.
DOI : 10.1016/0045-7825(92)90141-6

T. E. Tezduyar and Y. Osawa, Finite element stabilization parameters computed from element matrices and vectors, Computer Methods in Applied Mechanics and Engineering, vol.190, issue.3-4, pp.411-430, 2000.
DOI : 10.1016/S0045-7825(00)00211-5

. Thuinet, Computer simulation of microsegregation in th case of columnar growth involving a peritectic transformation for multicomponent steels, Proc. MCWASP X, 10th Int. Conf. on Modeling of Casting, Welding and Advanced Solidification Processes, pp.25-30, 2003.

I. Vannier, Modélisation de la solidification des lingots d'acier, Thèse de doctorat, 1995.

J. D. Verhoeven, Fundamentals of physical metallurgy, pp.285-287, 1975.

V. R. Voller and C. Prakash, A fixed grid numerical modelling methodology for convection-diffusion mushy region phase-change problems, International Journal of Heat and Mass Transfer, vol.30, issue.8, pp.1709-1719, 1987.
DOI : 10.1016/0017-9310(87)90317-6

H. V. Voller, A. D. Voller, C. Brent, and . Prakash, The modelling of heat, mass and solute transport in solidification systems, International Journal of Heat and Mass Transfer, vol.32, issue.9, pp.1719-1713, 1989.
DOI : 10.1016/0017-9310(89)90054-9

O. C. Zienkiewicz and R. L. Taylor, The Finite Element Method solid and fluid mechanics dynamics and non-linear. Fourth Edition, pp.438-456, 1989.