Simulation par éléments finis en 3D du comportement thermomécanique au cours du traitement thermique d'acier : application à la, 2000. ,
Accurate determination of biaxial stress???strain relationships from hydraulic bulging tests of sheet metals, International Journal of Mechanical Sciences, vol.39, issue.7, pp.761-769, 1997. ,
DOI : 10.1016/S0020-7403(96)00093-8
Plastic anisotropy in low carbon steels subjected to simple shear with strain path change, Eur. J. Mech., A/solids, vol.13, pp.5-661, 1994. ,
Linear transformation-based anisotropic yield functions, International Journal of plasticity, 2004. ,
DOI : 10.1016/j.ijplas.2004.06.004
Comportement mécanique des mousses d'aluminium : caractérisations expérimentales sous sollicitations complexes et simulations numériques dans le cadre de l'élasto-plasticité compressible, 2003. ,
Orientational evolution of plastic orthotropy in sheet metals, Journal of the Mechanics and Physics of Solids, vol.48, issue.11, pp.2231-2255, 2000. ,
DOI : 10.1016/S0022-5096(00)00014-4
Etude expérimentale et modélisation du comportement plastique anisotrope de tôles d'acier en grandes transformations, Thèse de doctorat, 1992. ,
Strain localization in the diffuse neck in sheet metal, Metallurgical Transactions, vol.65, issue.no. 6, pp.1607-1616, 1974. ,
DOI : 10.1007/BF02646332
Modelling the plastic anisotropy of metals. Archives of computational method in Engineering, pp.1-3, 2004. ,
Hydroforming of sheet metal pairs, Journal of Materials Processing Technology, vol.87, issue.1-3, pp.154-164, 1999. ,
DOI : 10.1016/S0924-0136(98)00347-1
Plastic anisotropy and the geometry of yield surfaces in stress space, Journal of the Mechanics and Physics of Solids, vol.48, issue.6-7, 2000. ,
DOI : 10.1016/S0022-5096(99)00080-0
Plasticity and creep of pressurized membranes: A new look at the small-deflection theory, Journal of the Mechanics and Physics of Solids, vol.28, issue.1, pp.27-48, 1980. ,
DOI : 10.1016/0022-5096(80)90010-1
C. A theory of the plastic bulging of a metal diaphragm by lateral pressure, The London, Edinburgh, and Dublin Philosophical Magazine and Journal of Science, vol.171, issue.322, 1950. ,
DOI : 10.1080/14786445008561154
URL : https://hal.archives-ouvertes.fr/in2p3-00115430
Methods for handling of FEM input and output data with the goal of higher computational reliability, European congress on computational methods in applied sciences and engineering, pp.11-14, 2000. ,
On yield loci of anisotropic cubic metals. Proceedings of the seventh North American metalworking research conference, Dearborn: SME, pp.191-197, 1979. ,
Evolution of anisotropy under plane stress, Journal of the Mechanics and Physics of Solids, vol.45, issue.5, pp.841-851, 1997. ,
DOI : 10.1016/S0022-5096(96)00085-3
On the determination of biaxial stress-strain curves and forming limit diagrams by hydraulic bulging, Scandinavian Journal of Metallurgy, vol.5, pp.124-128, 1976. ,
Etude expérimentale et numérique de la localisation de la déformation lors de la mise en forme de produits minces, Thèse de doctorat, Ecole des Mines de, 2001. ,
Ecrouissage isotrope et anisotrope des aciers laminés soumis à des grandes déformations, Thèse de doctorat, 1994. ,
Forming limit diagrams for anisotropic metal sheets with different yield criteria, International Journal of Solids and Structures, vol.37, issue.37, pp.5037-5059, 2000. ,
DOI : 10.1016/S0020-7683(99)00200-0
Bulge Test on Free Standing Gold Thin Films, MRS Proceedings, vol.2, pp.437-442, 2003. ,
DOI : 10.1016/S1359-6454(03)00007-7
Plasticité classique et viscoplasticité, International Centre for Mechanical Sciences, courses and lectures N°, p.97, 1971. ,
Stress strain relationship in simple shear of in-plane deformation for various steel sheets, Efficiency in sheet Metal Forming, Proc. Of the 13 th Biennial Congress, pp.360-371, 1984. ,
Hydroforming of sheet metal pairs from aluminium alloys, Journal of Materials Processing Technology, vol.115, issue.1, 2001. ,
DOI : 10.1016/S0924-0136(01)00766-X
Measuring the mechanical properties of thin metal films by means of bulge testing of micromachined windows. Thin Films: Stresses and Mechanical Properties V, pp.579-584, 1994. ,
Sheet material characterisation by multi-axial experiments, Thèse de doctorat, 2001. ,
Etude expérimentale et théorique des lois de comportement et de la striction de tôles d'acier pour la simulation de l'emboutissage, 1993. ,
Plastic anisotropy of sheet metals determined by simple shear tests, Material science and engineering A241, pp.179-183, 1998. ,
DOI : 10.1016/S0921-5093(97)00486-3
Equivalence and instability correlations for isotropic and anisotropic sheet plasticity, Proc. Tech. 40, pp.173-194, 1994. ,
DOI : 10.1016/0924-0136(94)90485-5
Instability limits to the forming of sheet metals, Proc. Tech. 55 pp, pp.146-153, 1995. ,
DOI : 10.1016/0924-0136(95)01947-2
Pole instability theory for ellipsoidal bulging of rolled sheet, Journal of Materials Processing Technology, vol.92, issue.93, 1999. ,
DOI : 10.1016/S0924-0136(99)00121-1
Shear testing of a sheet steel at wide range of strain rates and a constitutive relation with strain-rate and temperature dependence of the flow stress, International Journal of Plasticity, vol.17, issue.1, pp.87-115, 2001. ,
DOI : 10.1016/S0749-6419(00)00020-6
Formability & workability of metals, plastic instability & flow localization, p.178, 1983. ,
Assessment of behavior of sheet metal during hydroforming efficiency in sheet metal forming . 13 th Biennal Congress, pp.1-106, 1984. ,
Hydroforming sheet meatl with intermittent changes in the draw-in condition of the flange, J. Mat. Proc. Tech, pp.63-72, 1997. ,
The hemming process: A numerical and experimental study, Thèse de doctorat, 2003. ,
Finite plastic deformation of a circular membrane under hydrostatic pressure, International Journal of Mechanical Sciences, vol.8, issue.10, pp.619-628, 1983. ,
DOI : 10.1016/0020-7403(66)90040-3
Finite strain analysis of simple shear using recent anisotropic yield criteria, International Journal of Plasticity, vol.15, issue.9, pp.939-962, 1999. ,
DOI : 10.1016/S0749-6419(99)00026-1
A finite element method for simulations of 3-dimensional sheet metal forming, Thèse de doctorat, 1992. ,
On the plastic bulging of a circular diaphragm by hydrostatic pressure, Journal of the Mechanics and Physics of Solids, vol.17, issue.1, pp.43-59, 1969. ,
DOI : 10.1016/0022-5096(69)90012-X
The anomalous behavior of aluminum sheet under balanced biaxial tension, International Journal of Mechanical Sciences, vol.20, p.5, 1970. ,
Characterization of mechanical properties of thin polymer films using a bi-axial tension based on blow-up test, Plastics, Rubber and composites, vol.32, 2003. ,
Predictive model of FLC (Arcelor model) upgraded to UHSS steels, Proceedings 24 th international Deep-Drawing Research Group Congress (IDDRG), 2005. ,
Finite plastic deformation of a circular membrane under hydrostatic pressure???I, International Journal of Mechanical Sciences, vol.25, issue.4, pp.219-233, 1982. ,
DOI : 10.1016/0020-7403(83)90026-7
Finite plastic deformation of a circular membrane under hydrostatic pressure???II, International Journal of Mechanical Sciences, vol.25, issue.4, pp.235-244, 1982. ,
DOI : 10.1016/0020-7403(83)90027-9
Bending effects on forming limit diagrams. Forming Limit Diagrams: Concepts, Methods, and applications, 1989. ,
The Minerals, Metals & Materials Society, 1989. ,
Bifurcation of Elastic-Plastic Circular Cylindrical Shells Under Internal Pressure, Journal of Applied Mechanics, vol.46, issue.4, pp.889-894, 1979. ,
DOI : 10.1115/1.3424673
Fracture criterion and forming pressure design for superplastic bulging, Materials Science and Engineering: A, vol.333, issue.1-2, pp.146-154, 2002. ,
DOI : 10.1016/S0921-5093(01)01818-4
URL : http://ntur.lib.ntu.edu.tw//bitstream/246246/85655/1/06.pdf
The analysis of instability and strain concentration during superplastic deformation, pp.153-160, 2001. ,
Modélisation et prévision des instabilités plastiques en emboutissage. F. Moussy and P. Franciosi, éditeurs, Physique et Mécanique de la Mise en Forme des Métaux, Ecole d'été d'Oléron, pp.444-460, 1990. ,
Plastic instability and growth of grooves and patches in plates or tubes, International Journal of Mechanical Sciences, vol.14, issue.5, p.325, 1972. ,
DOI : 10.1016/0020-7403(72)90087-2
Effects of plastic anisotropy and yield criteria on prediction of forming limit curves, International Journal of Mechanical Sciences, vol.42, issue.1, pp.29-48, 2000. ,
DOI : 10.1016/S0020-7403(98)00114-3
Etablissement d'un critère de striction intrinsèque des tôles et validation numérique par simulation numérique d'emboutissage, Thèse de doctorat, 1998. ,
Strain localization in the diffuse neck in sheet metal, Metallurgical Transactions, vol.65, issue.no. 6, pp.1607-1616, 1974. ,
DOI : 10.1007/BF02646332
A numerical analysis of the tensile test for sheet metals, Metallurgical Transactions A, vol.23, issue.8, pp.1221-1232, 1977. ,
DOI : 10.1007/BF02643836
Tensile instability and necking in materials with strain hardening and strain-rate hardening, Acta Metallurgica, vol.25, issue.12, pp.1413-1424, 1977. ,
DOI : 10.1016/0001-6160(77)90072-4
Calculations of forming limit, Metallurgical Transactions A, vol.5, issue.11, pp.2497-2501, 1993. ,
DOI : 10.1016/0020-7403(80)90011-9
Effect of changing strain paths on, Metallurgical Transactions A, vol.12, issue.11, pp.2503-2512, 1993. ,
DOI : 10.1016/0001-6160(65)90145-8
Sheet metal forming-limits for complex strain paths, Journal of Mechanical Working Technology, vol.10, issue.3, pp.349-362, 1984. ,
DOI : 10.1016/0378-3804(84)90048-2
Theory of the tensile test, Acta Metallurgica, vol.15, issue.2, pp.351-355, 1967. ,
DOI : 10.1016/0001-6160(67)90211-8
A simple forming limit curve technique and results on aluminium alloys, 1972. ,
On discontinuous plastic states, with special reference to localized necking in thin sheets, Journal of the Mechanics and Physics of Solids, vol.1, issue.1, pp.19-30, 1952. ,
DOI : 10.1016/0022-5096(52)90003-3
A general theory of uniqueness and stability in elastic-plastic solids, Journal of the Mechanics and Physics of Solids, vol.6, issue.3, 1958. ,
DOI : 10.1016/0022-5096(58)90029-2
A prediction method for ductile sheet metal failure, Proceedings of the Numisheet96 conference, pp.252-256, 1996. ,
Influence of strain-rate sensitivity on necking under uniaxial tension, Acta Metallurgica, vol.25, issue.8, pp.839-846, 1977. ,
DOI : 10.1016/0001-6160(77)90168-7
Sheet necking III. Strain rate effects. Mechanics of sheet metal forming, pp.269-285, 1978. ,
DOI : 10.1007/978-1-4613-2880-3_11
Prediction of limit strain in sheet metal-forming processes by 3D analysis of localized necking, International Journal of Mechanical Sciences, vol.42, issue.11, pp.2233-2248, 2000. ,
DOI : 10.1016/S0020-7403(00)00004-7
Effect of predeformation and strain path on the forming limits of steel, cooper and Brass, International sheet metal industries, pp.591-599, 1977. ,
Etude expérimentale et numérique de la localisation de la déformation lors de la mise en forme de produits minces, Thèse de doctorat, Ecole des Mines de, 2001. ,
Forming limit diagrams for anisotropic metal sheets with different yield criteria, International Journal of Solids and Structures, vol.37, issue.37, pp.5037-5059, 2000. ,
DOI : 10.1016/S0020-7683(99)00200-0
Instability and failure of internally pressurized ductile metal cylinders, Journal of the Mechanics and Physics of Solids, vol.30, issue.3, pp.121-154, 1982. ,
DOI : 10.1016/0022-5096(82)90020-5
Modélisation et simulation de la striction et de plisssement en emboutissage de tôle minces et en hydroformage de tubes minces, Thèse de doctorat, U.F.R des sciences et techniques, 2002. ,
Influence of strain-rate sensitivity on necking and instability in sheet metal forming, Journal of Materials Processing Technology, vol.96, issue.1-3, pp.133-138, 1999. ,
DOI : 10.1016/S0924-0136(99)00321-0
Post-uniform deformation in uniaxial and equi-biaxial stretching of aluminium alloy sheets, Journal of Materials Processing Technology, vol.70, issue.1-3, pp.93-98, 1997. ,
DOI : 10.1016/S0924-0136(97)00042-3
Limit strains in the processes of stretch-forming sheet metal, International Journal of Mechanical Sciences, vol.9, issue.9, pp.609-620, 1967. ,
DOI : 10.1016/0020-7403(67)90066-5
Influence of the plastic properties of a material on the forming limit diagram for sheet metal in tension, International Journal of Mechanical Sciences, vol.15, issue.10, pp.789-805, 1973. ,
DOI : 10.1016/0020-7403(73)90068-4
Limits to the ductility of metal sheets subjected to complex strain-paths, International Journal of Plasticity, vol.14, issue.4-5, pp.391-411, 1998. ,
DOI : 10.1016/S0749-6419(98)00011-4
Material rate dependence and mesh sensitivity in localization problems, Computer Methods in Applied Mechanics and Engineering, vol.67, issue.1, pp.69-85, 1988. ,
DOI : 10.1016/0045-7825(88)90069-2
Predictions of limit strains in sheet metal using a more general yield criterion, International Journal of Mechanical Sciences, vol.20, issue.6, pp.385-391, 1978. ,
DOI : 10.1016/0020-7403(78)90041-3
Experimental and numerical study in axial crushing of thin walled sections made of high-strength steels, Journal de Physique IV (Proceedings), vol.110, pp.717-722, 2003. ,
DOI : 10.1051/jp4:20020778
The Effect of Strain Rate on the Forming Limit Diagram for Sheet Metal, CIRP Annals - Manufacturing Technology, vol.29, issue.1, pp.102-106, 1980. ,
DOI : 10.1016/S0007-8506(07)61312-2
Post-critical plastic deformation of biaxially stretched sheets, International Journal of Solids and Structures, vol.33, issue.5, pp.689-705, 1996. ,
DOI : 10.1016/0020-7683(95)00061-E
A criterion for local necking, Journal of Materials Processing Technology, vol.103, issue.1, pp.165-171, 2000. ,
DOI : 10.1016/S0924-0136(00)00410-6
Plastic flow in the elliptical bulge test, International Journal of Mechanical Sciences, vol.37, issue.4, pp.373-389, 1995. ,
DOI : 10.1016/0020-7403(94)00071-Q
-151 - 4.6.1. Formulation faible continue ou principe des travaux virtuels. -152 - 4.6.3. Discrétisation temporelle, ., p.163 ,
-164 - 4.7.2. Choix du mailleur, p.170 ,
Simulation par éléments finis en 3D du comportement thermomécanique au cours du traitement thermique d'acier : application à la, 2000. ,
Contribution à la modélisation numérique thermo-mécanique tridimensionnelle du forgeage, Thèse de doctorat, 1999. ,
Grandes transformations et remaillage automatique, Thèse de doctorat, Ecole des Mines de Paris-CEMEF, 1991. ,
Studies in anisotropic plasticity with reference to the Hill criterion, International Journal for Numerical Methods in Engineering, vol.22, issue.2, pp.315-336, 1990. ,
DOI : 10.1002/nme.1620290208
Contribution à la simulation numérique tridimensionnelle du forgeage à froid, Thèse de doctorat, 1995. ,
Génération de métriques pour adaptation anisotrope de maillages, applications à la mise en forme des matériaux, Thèse de doctorat, 2004. ,
Etude expérimentale et numérique de la localisation de la déformation lors de la mise en forme de produits minces, Thèse de doctorat, Ecole des Mines de, 2001. ,
Contribution à la simulation numérique tridimensionnelle du forgeage à chaud : Etude du contact et calcul multigrille, Thèse de doctorat, 1999. ,
Etude de l'adaptation de Forge3 aux produits minces. Rapport technique, Ecole des Mines de Paris-CEMEF, 1998. ,
Modélisation numérique en science et génie des matériaux. Traité des matériaux 10, première édition, 1998. ,
Etude théorique et expérimentale de l'extrusion-soufflage de corps creux en polymère, Thèse de doctorat, 1997. ,
Consistent tangent operators for rate-independent elastoplasticity, Computer Methods in Applied Mechanics and Engineering, vol.48, issue.1, pp.101-118, 1985. ,
DOI : 10.1016/0045-7825(85)90070-2
Incremental displacement algorithms for nonlinear problems, International Journal for Numerical Methods in Engineering, vol.14, issue.8, pp.1262-1267, 1979. ,
DOI : 10.1002/nme.1620140811
Improved arc length orthogonality methods for nonlinear finite element analysis, Computers& Structures, vol.27, issue.5, pp.625-630, 1987. ,
Contribution à l'étude des membranes hyper-elastiques en grandes déformations, Thèse de doctorat, 2002. ,
A fast incremental/iterative solution procedure that handles ???snap-through???, Computers & Structures, vol.13, issue.1-3, pp.55-62, 1981. ,
DOI : 10.1016/0045-7949(81)90108-5
An arc-length method including line searches and accelerations, International Journal for Numerical Methods in Engineering, vol.97, issue.9, pp.1269-1289, 1983. ,
DOI : 10.1002/nme.1620190902
Modélisation thermomécanique tridimensionnelle par éléments finis de la coulée continue d'aciers, Thèse de doctorat, Ecole des Mines de Paris-CEMEF, 2004. ,
Computation of post-bifurcation and post-failure behaviour of strain-softening solids, Computers & Structures, vol.25, pp.221-224, 1987. ,
Determination of travel directions in pathfollowing methods, Mathematical and Computer Modelling, vol.21, pp.743-59, 1995. ,
A new criterion for determination of initial loading parameter in arc-length methods, Computers & Structures, vol.58, issue.3, pp.479-485, 1996. ,
DOI : 10.1016/0045-7949(95)00168-G
Numerical analysis of thin sheet metal forming and hydroforming with brick and prismatic finite elements, rapport, 1999. ,
Finite element analysis of tube hydroforming using static explicit method, simulation of materials processing: Theory, methods and applications, 2001. ,
A local arc-length procedure for strain softening, Computers & Structures, vol.64, issue.1-4, pp.1-4, 1997. ,
DOI : 10.1016/S0045-7949(96)00172-1
A study on the instability problem for 3D frames, Computer Methods in Applied Mechanics and Engineering, vol.158, issue.3-4, pp.235-254, 1998. ,
DOI : 10.1016/S0045-7825(98)00254-0
Arc-length technique for nonlinear finite element analysis, Journal of Zhejiang University SCIENCE, vol.5, issue.5, pp.618-628, 2004. ,
DOI : 10.1631/jzus.2004.0618
Contribution à la simulation numérique tridimensionnelle du forgeage à chaud : Etude du contact et calcul multigrille, Thèse de doctorat, 1999. ,
Effect strategies for tracing the nonlinear response near limit points, WUNDERLICH W ET AL " nonlinear finite element analysis in structural mechanics, 1981. ,
The Application of Newton???s Method to the Problem of Elastic Stability, Journal of Applied Mechanics, vol.39, issue.4, 1972. ,
DOI : 10.1115/1.3422829
An incremental approach to the solution of snapping and buckling problems, International Journal of Solids and Structures, vol.15, issue.7, pp.529-551, 1979. ,
DOI : 10.1016/0020-7683(79)90081-7
Bordered equations in continuation methods: an improved solution technique,National aerospace laboratory NLR, 1988. ,
Consistent linearization for path following methods in nonlinear fe analysis, Computer Methods in Applied Mechanics and Engineering, vol.59, issue.3, pp.261-279, 1986. ,
DOI : 10.1016/0045-7825(86)90001-0
On the determination of the path direction for arclength methods in the presence of bifurcations and 'snap-backs, 1999. ,
A simple method for the calculation of postcritical branches, Engineering Computations, vol.5, issue.2, pp.103-109, 1988. ,
DOI : 10.1108/eb023727
Discrete approximations related to nonlinear theories of solids, International Journal of Solids and Structures, vol.7, issue.11, pp.1581-1599, 1971. ,
DOI : 10.1016/0020-7683(71)90038-2
An incremental solution technique for unstable equilibrium paths of shell structures, Computers & Structures, vol.55, issue.5, pp.749-759, 1994. ,
DOI : 10.1016/0045-7949(94)00474-H
-224 - 6.3.1. Etude d'un essai de gonflage circulaire, p.226 ,
-227 - 6.3.2.1. Essais de gonflage en matrices elliptiques, p.231 ,
Double sheet hydroforming of complex hollow parts, Proc. Of the 7 th ICTP, pp.991-996, 2002. ,
Hydroforming of sheet metal pairs, Journal of Materials Processing Technology, vol.87, issue.1-3, pp.154-164, 1999. ,
DOI : 10.1016/S0924-0136(98)00347-1
An experimental and numerical study of necking initiation in aluminium alloy tubes during hydroforming, Inter. J. Mech. Sci, vol.46, pp.1727-1746, 2004. ,
Development of Double Sheet Hydroforming Technology, SAE Technical Paper Series, pp.2-34, 2002. ,
DOI : 10.4271/2002-01-2029