Potiron Optimisation of springback predicted by experimental and numerical approach by using response surface methodology, International Journal of Materials Processing Technology ,
Potiron Optimisation of bending process by means of response surface and moving least squares methods, Far East Journal of Applied Mathematics, vol.22, issue.1, pp.25-54, 2006. ,
Potiron Experimental characterisation in sheet forming processes by using Vickers micro hardness technique, Journal of Materials Processing Technology, p.1609 ,
Potiron Optimisation de forme de pièces de sécurité à l'aide de plans d'expériences et surfaces de réponse, 1 st International Congress Design and Modelling of Mechanical Systems, p.98, 2005. ,
Potiron Optimisation of springback predicted by experimental and numerical approach by using response surface methodology, Proceedings of International Conference of Sheet Metal 2005, pp.573-760 ,
Potiron Optimisation of process parameters in wiping die bending operation in order to minimise of stresses and Lemaitre's damage, International conference on material forming ESAFORM, pp.159-162, 2005. ,
Potiron Sheet metal bending optimisation using response surface method, numerical simulation and design of experiments, Congress of materials and manufacturing engineering and technology COMMENT, p.134, 2005. ,
Dal Santo Optimisation of process parameters for the minimisation of stress field and bending load in sheet metal bending operation, International conference on innovations in deep drawing IDDRG 2005, pp.1-10 ,
Potiron Optimisation of the L-bending process: A comparison between Response Surface, Moving Least Squares and Evolution Strategies Methods, Proceedings of the first invited COST 526 conference on Automatic Process Optimization in Materials Technology 2005, pp.120-131 ,
Dal Santo Experimental and numerical investigation in sheet bending processes using Response Surface Methodology, Congress of materials and manufacturing engineering and technology COMMENT, p.156, 2005. ,
Potiron Numerical analysis and response surface method to investigate friction effects in sheet bending application, International conference on material forming ESAFORM 2005, pp.261-264 ,
Numerical simulation of sheet cutting, Références bibliographiques Proceedings NUMIFORM 95, pp.807-813, 1995. ,
A comparison of exprimental designs in the development of a neural network simulation metamodel. Simulation Modelling Practice and Theory, pp.559-578, 2004. ,
Determination of spring back in air bending using parabolic model, Proceeding of the 8 th International Conference on Sheet Metal, pp.0-95276, 2000. ,
Shape Optimisation of Automotive Security-parts Regarding the Influence of Residual Stresses and Material Damage, 4th European Congress on Computational Methods in Applied Sciences and Engineering, Finland, p.490, 2004. ,
Influence de la forme des attaches de sécurité sur leur comportement en service. Mécanique & Industrie (Accepté avec correction _ Reference, 2004. ,
Optimisation of the Lbending process: A comparison between Response Surface, Moving Least Squares and Evolution Strategies Methods, Proceedings of the first invited COST 526 conference on Automatic Process Optimization in Materials Technology, Morschach ? Switzerland, pp.120-131, 2005. ,
Optimisation of springback predicted by experimental and numerical approach by using response surface methodology, Proceedings of International Conference of Sheet Metal, pp.573-760, 2005. ,
Optimisation of process parameters in wiping die bending operation in order to minimise of stresses and Lemaitre's damage. International conference on material forming ESAFORM, pp.159-162, 2005. ,
Optimisation of process parameters for the minimisation of stress field and bending load in sheet metal bending operation, International conference on innovations in deep drawing IDDRG, 2005. ,
Dal Santo; H. Naceur; A. Potiron. Optimisation of bending process by means of response surface and moving least squares methods, Far East Journal of Applied Mathematics, vol.22, issue.1, pp.25-54, 2006. ,
Optimisation de forme de pièces de sécurité à l'aide de plans d'expériences et surfaces de réponse. First International Congress Design and Modelling of Mechanical Systems, p.98, 2005. ,
Potiron Sheet metal bending optimisation using response surface method, numerical simulation and design of experiments. Congress of materials and manufacturing engineering and technology COMMENT, p.134, 2005. ,
Analyse et conception rapides de paramètres du procédé d'emboutissage pour le contrôle du retour élastique, Thèse de doctorat, pp.13-2004 ,
Optimizing the laser-welded butt joints of medium carbon steel using RSM, Journal of Materials Processing Technology, vol.164, issue.165, pp.164-165, 2005. ,
DOI : 10.1016/j.jmatprotec.2005.02.067
Global modeling for optimization, Boeing/IBMRice Collabrative Project, 1995. ,
Meshfree operators for consistents field transfert in large deformation plasticity, Proceedings of ECCOMAS-ECCM-2001, 2001. ,
Moving least squares response surface approximation: Formulation and metal forming applications, Computers & Structures, vol.83, issue.17-18, pp.1411-1428, 2005. ,
DOI : 10.1016/j.compstruc.2004.07.011
Numerical simulation of springback using enhanced assumed strain elements, Journal of Materials Processing Technology, vol.153, issue.154, pp.153-154, 2004. ,
DOI : 10.1016/j.jmatprotec.2004.04.342
Application of Experimental Design Method in the Screening of Electromagnetic Devices Parameters, 2000. ,
Influence du mode de découpe sur le comportement en fatigue de tôles minces d'aciers dual-phase. Mémoires d'études scientifiques, pp.233-247, 1990. ,
Continuous damage mechanics ??? A tool to describe phenomena before crack initiation, Nuclear Engineering and Design, vol.64, issue.2, 1981. ,
DOI : 10.1016/0029-5493(81)90007-8
A study of sidewall curl in sheet metal forming processes, Proceeding of the 8 th International Conference on Sheet Metal, pp.0-95276, 2000. ,
Using neural networks to predict bending angle of sheet metal formed by laser, International Journal of Machine Tools and Manufacture, vol.40, issue.8, pp.1185-1197, 2000. ,
DOI : 10.1016/S0890-6955(99)00111-X
Finite element analysis and optimization of springback reduction, International Journal of Machine Tools & Manufacture, vol.39, pp.517-536, 1999. ,
Application of a genetic algorithm to process optimal design in non-isothermal metal forming, Journal of Materials Processing Technology, pp.80-81, 1998. ,
Sensitivity of model parameters in stretch bending of aluminium extrusions, International Journal of Mechanical Sciences, vol.43, issue.2, pp.427-453, 2001. ,
DOI : 10.1016/S0020-7403(00)00012-6
Neural Network Exploration Using Optimal Experiment Design, Neural Networks, vol.9, issue.6, 2001. ,
DOI : 10.1016/0893-6080(95)00137-9
Faisabilit?? en emboutissage : optimisation du mat??riau par surface de??r??ponseFeasibility in deep drawing: optimization of material properties using response surface, M??canique & Industries, vol.3, issue.2, pp.93-98, 2002. ,
DOI : 10.1016/S1296-2139(02)01144-2
Finite element analysis of springback in bending of aluminium sheets, Materials & Design, vol.23, issue.2, pp.223-229, 2002. ,
DOI : 10.1016/S0261-3069(01)00062-0
Optimization of loading conditions for tube hydroforming, Journal of Materials Processing Technology, vol.140, issue.1-3, pp.1-3, 2003. ,
DOI : 10.1016/S0924-0136(03)00778-7
Diagnostic expert systems for defects in forged parts, Journal of Intelligent Manufacturing, vol.6, issue.3, pp.163-173, 1995. ,
DOI : 10.1007/BF00171445
A new approach to the mechanics of the blanking operation: Theoretical model and experimental verification, Journal of Mechanical Working Technology, vol.11, issue.2, pp.215-228, 1985. ,
DOI : 10.1016/0378-3804(85)90026-9
Plan d'expériences pour surface de réponse, 1999. ,
A Bayesian design criterion for locating the optimum point on a response surface, Statistics & Probability Letters, vol.64, issue.3, pp.235-242, 2003. ,
DOI : 10.1016/S0167-7152(03)00154-8
Neural networks applications in concrete structures, Computers & Structures, vol.81, issue.6, pp.373-381, 2003. ,
DOI : 10.1016/S0045-7949(02)00451-0
Sheet metal blanking simulation with ABAQUS. ABAQUS User's Conference, pp.409-417, 1995. ,
Etude expérimentale, numérique et théorique du découpage des tôles en vue de l'optimisation du procédé, Thèse de doctorat ENSAM Angers, 1996. ,
Finite element model fracture prediction during sheet-metal blanking processes, Engineering Fracture Mechanics, vol.68, issue.3, pp.365-378, 2000. ,
DOI : 10.1016/S0013-7944(00)00106-5
Comparison between Lemaitre and Gurson damage models in crack growth simulation during blanking process, International Journal of Mechanical Sciences, vol.43, issue.12, pp.2769-2790, 2001. ,
Application of design of experiment technique for metal blanking processes optimization, M??canique & Industries, vol.4, issue.3, pp.175-180, 2003. ,
DOI : 10.1016/S1296-2139(03)00035-6
Application of neural network for optimum clearance prediction in sheet metal blanking processes, Finite Elements in Analysis and Design, vol.39, pp.1039-1052, 2003. ,
Completely Derandomized Self-Adaptation in Evolution Strategies, Evolutionary Computation, vol.9, issue.2, pp.159-195, 2001. ,
DOI : 10.1016/0004-3702(95)00124-7
Reducing the Time Complexity of the Derandomized Evolution Strategy with Covariance Matrix Adaptation (CMA-ES), Evolutionary Computation, vol.11, issue.1, pp.1-18, 2003. ,
DOI : 10.1162/106365601750190398
Multiquadratic equations of topography and other irregular surfaces, Journal of Geophysical Research, vol.76, 1905. ,
Numerical modeling of material deformation process resarch, developpement and applications, 1992. ,
Contact and interaction modelling. ABAQUS/ STANDARD User's Manual, U.S.A, version 6, 2001. ,
Spring back of sheet metal laminates subjected to stretch bending and the subsequent unbending, Proceedings of the 6 th International conference on Technology of Plasticity, pp.3-540, 1999. ,
Prediction of forming pressure curve for hydroforming processes using artificial neural network, Proceedings of the institution of Mechanical Engineers. Part I, pp.109-121, 1994. ,
DOI : 10.1243/PIME_PROC_1994_208_315_02
On the effects of geometric parameters on springback in sheets of five materials subjected to air vee bending, Proceeding of the 8 th International Conference on Sheet Metal, pp.0-95276, 2000. ,
DOI : 10.1016/S0924-0136(02)00136-X
Studies on the prediction of springback in air vee bending of metallic sheets using an artificial neural network, Journal of Materials Processing Technology, vol.108, issue.1, pp.45-54, 2000. ,
DOI : 10.1016/S0924-0136(00)00588-4
Effect of punch clearance in the high-speed blanking of thick metals using an accelerator designed for a mechanical press, Journal of Mechanical Working Technology, vol.19, issue.1, pp.55-72, 1989. ,
DOI : 10.1016/0378-3804(89)90066-1
Sheet metal forming processes, Manufacturing Processes for Engineering Materials, pp.0-201, 1991. ,
Manufacturing processs for engineering materials, 1991. ,
Design sensitivity analysis of sheet metal forming processes with a direct differentiation method, Journal of Materials Processing Technology, vol.130, issue.131, pp.130-131, 2002. ,
DOI : 10.1016/S0924-0136(02)00797-5
Optimisation des structures, pp.9-11, 1987. ,
Design of grinding factors based on response surface methodology, Journal of Materials Processing Technology, vol.162, issue.163, pp.162-163, 2005. ,
DOI : 10.1016/j.jmatprotec.2005.02.187
Crashworthiness design optimization using successive response surface approximations, Computational Mechanics, vol.29, issue.4-5, pp.409-421, 2002. ,
DOI : 10.1007/s00466-002-0351-x
Artificial intelligence approach to the internal variablebased rheological model for steels, Proceeding of the Second International Conference on Intelligent Processing and Manufacturing of Materials IPMM'99, pp.773-778, 1999. ,
Modelling of microstructure and mechanical properties of steel using the artificial neural network, Journal of Materials Processing Technology, vol.127, issue.1, pp.115-121, 2002. ,
DOI : 10.1016/S0924-0136(02)00278-9
An introduction: Curve and surface fitting, 1985. ,
An approach for multiple criteria simulation optimization with appication to turning operation, Computer and Industrial Engineering, vol.110, pp.375-386, 1996. ,
Finite element analysis and design in stainless steel sheet forming and its experimental comparison, Journal of Materials Processing Technology, vol.110, issue.1, pp.70-77, 2000. ,
DOI : 10.1016/S0924-0136(00)00735-4
A continuous damage mechanics model for ductile fracture, Journal of Engineering Materials and Technology, vol.107, pp.83-89, 1985. ,
Mécanique des matériaux solides, pp.343-444, 1988. ,
Prediction and elimination of springback in straight flanging using computer aided design methods, Journal of Materials Processing Technology, vol.117, issue.1-2, pp.262-268, 2001. ,
DOI : 10.1016/S0924-0136(01)01164-5
Prediction and elimination of springback in straight flanging using computer-aided design methods, Journal of Materials Processing Technology, vol.120, issue.1-3, pp.348-354, 2002. ,
DOI : 10.1016/S0924-0136(01)01161-X
Computer aided die design of straight flanging using approximate numerical analysis, Journal of Materials Processing Technology, vol.142, issue.2, pp.532-543, 2003. ,
DOI : 10.1016/S0924-0136(03)00655-1
Information-Based Objective Functions for Active Data Selection, Neural Computation, vol.4, issue.4 ,
DOI : 10.1088/0266-5611/1/3/006
The Mechanics of sheet metal forming. First published, pp.68-99, 1992. ,
Comparison of response surface and neural network with other methods for structural reliability analysis, Structural Safety, vol.26, issue.1, pp.49-67, 2004. ,
DOI : 10.1016/S0167-4730(03)00022-5
Finite element approach in the plate bending process, Journal of Materials Processing Technology, vol.125, issue.126, pp.125-126, 2002. ,
DOI : 10.1016/S0924-0136(02)00391-6
Introduction aux plans d'expériences par la méthode de Taguchi, 1994. ,
Les plans d'expériences par la méthode de Taguchi, 1997. ,
Response surface model development for global/local optimization using radial basis functions, 8th Symposium on Multidisciplinary Analysis and Optimization, pp.6-10, 2000. ,
DOI : 10.2514/6.2000-4776
Voraussage und reduzierung der Rückfederung beim biegen hockfester stahlbleche, Stahl. U. Eisen, vol.104, pp.1059-1064, 1984. ,
Bio-inspired optimization algorithms for engineering applications. PhD Swiss institute of technology, 2002. ,
Response Surface Methodology Process and Product Optimisation using Designed Experiments, 2002. ,
Using the Diffuse Approximation for Optimizing the Location of Anti-Sound Sources, Journal of Sound and Vibration, vol.171, issue.1, pp.1-21, 1994. ,
DOI : 10.1006/jsvi.1994.1100
Small radius bending of sheet metal by indentation with V-Shape punch, Proceedings of the 6th International Conference on Technology of Plasticity, pp.3-540, 1999. ,
Development of optimum process design system for sheet fabrication using response surface method, Journal of Materials Processing Technology, pp.143-144, 2003. ,
Effect of profile in basal section in shearing process. Memoire of the faculty of engineering, pp.249-273, 1978. ,
Effect of the geometry of cutting edge of tool in blanking process and punching. Memoire of the faculty of engineering, pp.371-395, 1984. ,
An engineering design methodology with multistage Bayesian surrogates and optimal sampling, Research in Engineering Design, vol.9, issue.2, pp.189-206, 1996. ,
DOI : 10.1007/BF01597226
Novel Fast Training Algorithm for Multilayer Feedforward Neural Network, Elec. Letters, vol.28, p.6, 1992. ,
Prediction of spring-back and side-wall curl in 2-D draw bending, Journal of Materials Processing Technology, vol.50, issue.1-4, pp.361-374, 1995. ,
DOI : 10.1016/0924-0136(94)01398-K
The theory of radial basis function approximation in 1990 Advances in Numerical Analysis Wavelets, Subdivision Algorithms, and Radial Basis Function, pp.105-210, 1992. ,
Elastic sprigback and residual stresses in sheet metal parts formed by bending, Trans. ASME, vol.61, pp.757-768, 1968. ,
Simultaneous surface and tetrahedron mesh adaptation using mesh-free techniques, International Journal for Numerical Methods in Engineering, vol.98, issue.3, pp.371-389, 2003. ,
DOI : 10.1002/nme.681
Using the Response Surface Methodology and the D-Optimality Criterion in Crashworthiness Related problems. Structural and Multidisciplinary Optimisation, pp.185-194, 2002. ,
Using Space Mapping and Surrogate Models to Optimize Vehicle Crashworthiness Design, 9th AIAA/ISSMO Symposium on Multidisciplinary Analysis and Optimization, 2002. ,
DOI : 10.2514/6.2002-5536
Modified backpropagation algorithm for fast learning in neural networks, Electronics Letters, vol.26, issue.19, p.19, 1990. ,
DOI : 10.1049/el:19901004
Prediction of damage evolution in forged aluminium metal matrix composites using a neural network approach, Journal of Materials Processing Technology, vol.80, issue.81, pp.80-81, 1998. ,
DOI : 10.1016/S0924-0136(98)00153-8
The application of artificial intelligence to the constitutive and microstructural behaviour of Nickel-base suerpalloys, The 4 th International ESAFORM Conference on Material Forming, pp.441-444, 2001. ,
Response surface approximations for structural optimization, International Journal for Numerical Methods in Engineering, vol.24, issue.3, pp.517-534, 1998. ,
DOI : 10.1002/(SICI)1097-0207(19980615)42:3<517::AID-NME370>3.0.CO;2-L
Design and Analysis of Computer Experiments, Statistical Science, vol.4, issue.4, pp.409-435, 1989. ,
DOI : 10.1214/ss/1177012413
Adaptative Bending, Proceeding of the 9 th International Conference on Sheet Metal, pp.90-73802, 2001. ,
Comparison of response surface and kriging models for multidisciplinary design optimization, 7th AIAA/USAF/NASA/ISSMO Symposium on Multidisciplinary Analysis and Optimization, pp.1-11, 1998. ,
DOI : 10.2514/6.1998-4755
Numerical simulation of the influence of air bending tool geometry on product quality, Proceeding of the 8 th International Conference on Sheet Metal, pp.0-95276, 2000. ,
DOI : 10.1016/S0924-0136(03)00443-6
Differential evolution-A simple and efficient heuristic strategy for global optimization over continuous spaces, Journal of Global Optimization, vol.11, issue.4, pp.341-359, 1997. ,
DOI : 10.1023/A:1008202821328
Design of experiments for stacking sequence optimizations with genetic algorithm using response surface approximation, Composite Structures, vol.64, issue.3-4, pp.349-357, 2004. ,
DOI : 10.1016/j.compstruct.2003.09.004
Mathematical modeling of plane-strain bending of sheet and plate, Journal of Materials Processing Technology, vol.39, issue.3-4, pp.279-304, 1993. ,
DOI : 10.1016/0924-0136(93)90164-2
Parameter optimisation in radial basis function response surface approximationAIAA-2002-1344, Structural Dynamics, and Materials Conference, 2002. ,
Learning Algorithms for connectionist Networks: Applied Gradient Methods of Non linear Optimization, IEEE First International Conf. On Neural Networks, 1987. ,
Computer experiments for quality control by parameter design, Journal of Quality Technology, vol.22, issue.1, pp.15-22, 1990. ,
Analysis of stresses in bar cropping. 15 th, Int.Mach. tool. Res. Conference, pp.617-624, 1975. ,
Sensitive factors in springback simulation for sheet metal forming, Journal of Materials Processing Technology, vol.151, issue.1-3, pp.217-222, 2004. ,
DOI : 10.1016/j.jmatprotec.2004.04.044
Development of real-time process control system for precision and flexible V-bending with an on-line database, Journal of Materials Processing Technology, vol.60, issue.1-4, pp.249-254, 1996. ,
DOI : 10.1016/0924-0136(96)02338-2
Design sensitivity analysis and optimization of the hydroforming process, Journal of Materials Processing Technology, vol.113, issue.1-3, pp.1-3, 2001. ,
DOI : 10.1016/S0924-0136(01)00670-7
Neural Networks based optimization in inverse analysis, Proceedings of the first invited COST 526 conference on Automatic Process Optimization in Materials Technology, Morschach ? Switzerland, pp.236-241, 2005. ,