A. J. Acosta, An Experimental Study of Cavitating Inducers " . 2 nd Symposium on Naval Hydrodynamics, Hydrodynamic Noise, Cavity flow, pp.25-29, 1958.

A. J. Acosta, Cavitation and fluid machinery Proceeding of cavitation conference, 1974.

K. Ashihara and A. Et-goto, Effects of Blade Loading on Pump Inducer Performance and Flow Fields, Volume 2: Symposia and General Papers, Parts A and B, 2002.
DOI : 10.1115/FEDSM2002-31201

R. E. Arndt, Cavitation in Fluid Machinery and Hydraulic Structures, Annual Review of Fluid Mechanics, vol.13, issue.1, pp.273-328, 1981.
DOI : 10.1146/annurev.fl.13.010181.001421

M. M. Athavale, H. Li, Y. Jiang, and A. K. Et-singhal, Application of the Full Cavitation Model to Pumps and Inducers, International Journal of Rotating Machinery, vol.8, issue.1, pp.45-56, 2002.
DOI : 10.1155/S1023621X02000052

F. Bakir, S. Kouidri, R. Noguera, and R. Rey, Design and analysis of axial inducers performances, 1998.

F. Bakir, S. Kouidri, R. Noguera, and R. Rey, Experimental Analysis of an Axial Inducer Influence of the Shape of the Blade Leading Edge on the Performances in Cavitating Regime, Journal of Fluids Engineering, vol.125, issue.2, pp.293-301, 2003.
DOI : 10.1115/1.1539872

F. Bakir, R. Rey, A. G. Gerber, T. Belamri, and B. Hutchinson, Numerical and Experimental Investigations of the Cavitating Behavior of an Inducer, International Journal of Rotating Machinery, vol.10, issue.1, pp.15-25, 2004.
DOI : 10.1155/S1023621X04000028

A. Bhattacharyya, A. J. Acosta, C. Brennen, and . T. Et-caughey, Rotordynamic Forces in Cavitating Inducers, Journal of Fluids Engineering, vol.119, issue.4, pp.768-774, 1997.
DOI : 10.1115/1.2819496

R. D. Blevins, Flow induced vibration, 1990.

O. Braun, J. L. Kueny, and F. Et-avellan, Numerical Analysis of Flow Phenomena Related to the Unstable Energy-Discharge Characteristic of a Pump-Turbine in Pump Mode", ASME Fluids Engineering Conference -Fifth Pumping Machinery Symposium, 2005.

C. E. Brennen, Hydrodynamics of Pumps, Concepts ETI, Inc, pp.128-138, 1994.
DOI : 10.1017/CBO9780511976728

J. K. Jakobsen, Liquid Rocket Engine Turbopump Inducers, NASA SP-8052, pp.17-24, 1971.

D. Japikse, W. D. Marscher, and R. B. Furst, Centrifugal Pump Design and Performance, Concepts ETI, Inc, pp.8-17, 1997.

D. D. Joseph, Cavitation in a flowing liquid, Physical Review E, vol.51, issue.3, p.1649, 1995.
DOI : 10.1103/PhysRevE.51.R1649

K. Kamijo, T. Simura, and M. Et-watanabe, Experimental Investigation of Cavitating Inducer Instability, 1977.

H. Kamono, H. Kato, H. Yamaguchi, and M. Miyanaga, Simulation of cavity flow by ventilated cavitation on a foil section, ASME-FED, vol.163, pp.183-189, 1993.

R. T. Knapp, J. W. Daily, and F. G. Et-hammitt, Cavitation, 1970.

Y. Kawanami, H. Kato, H. Yamagichi, M. Tanimura, and Y. Tagaya, Mechanism and Control of Cloud Cavitation, Journal of Fluids Engineering, vol.119, issue.4, pp.788-799, 1997.
DOI : 10.1115/1.2819499

A. Kubota, H. Kato, H. Yamaguchi, and M. Et-maeda, Unsteady Structure Measurement of Cloud Cavitation on a Foil Section Using Conditional Sampling Technique, Journal of Fluids Engineering, vol.111, issue.2, 1989.
DOI : 10.1115/1.3243624

A. Kubota, H. Kato, and H. Yamaguchi, A new modelling of cavitating flows: a numerical study of unsteady cavitation on a hydrofoil section, Journal of Fluid Mechanics, vol.36, issue.-1, pp.59-96, 1992.
DOI : 10.1063/1.1761178

J. L. Kueny, Cavitation Modeling, Lecture Series: Spacecraft Propulsion, 1993.

Y. Kuhn-de-chizelle, S. L. Ceccio, and C. E. Et-brennen, Observation and Scaling of Traveling Bubbble Cavitation, J. Fluid Mech, vol.293, pp.96-126, 1995.

R. F. Kunz, D. A. Boger, D. R. Stinebring, T. S. Chyczewski, J. W. Lindau et al., A preconditioned Navier???Stokes method for two-phase flows with application to cavitation prediction, Computers & Fluids, vol.29, issue.8, pp.849-875, 2000.
DOI : 10.1016/S0045-7930(99)00039-0

B. Lakshminarayana, Fluid Dynamics of Inducers, ASME Journal. of Fluid Engineering, vol.4, pp.411-427, 1982.

Y. A. Lecoffre and . Balkema, Cavitation Bubble Trackers, 1999.

R. B. Medvitz, R. F. Kunz, D. A. Boger, J. W. Lindau, A. M. Yocum et al., Performance Analysis of Cavitating Flow in Centrifugal Pumps Using Multiphase CFD, Journal of Fluids Engineering, vol.124, issue.2, pp.377-383, 2002.
DOI : 10.1115/1.1457453

I. Mejri, T. Belamri, and F. Et-bakir, CFX TascFlow TM 2.12 : Validation of the VOF Model on the LEMFI Inducer, CFX European Conference, pp.16-18, 2002.

I. Mejri, F. Bakir, S. Kouidri, and R. Rey, Hub shape effects on the inducers performance under cavitation, Fifth International Symposium on Cavitation (cav2003). OS-6-001, 2003.
DOI : 10.1243/09576509JPE137

I. Mejri, F. Bakir, R. Rey, and T. Belamri, Comparison of Computational Results Obtained from a VOF Cavitation Model with Experimental Investigations of three Inducers - Part I: Experimental Investigations", ASME Fluids Engineering Conference -Fifth Pumping Machinery Symposium, 2005.

I. Mejri, F. Bakir, R. Rey, and T. Belamri, Comparison of Computational Results Obtained from a VOF Cavitation Model with Experimental Investigations of three Inducers - Part II: Numerical Approach", ASME Fluids Engineering Conference -Fifth Pumping Machinery Symposium, 2005.

I. Mejri, F. Bakir, S. Kouidri, and R. Rey, Influence of peripheral blade angle on performance and stability of axial inducers, Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, vol.125, issue.4, pp.289-301, 2005.
DOI : 10.1243/095765005X28580

I. Mejri, F. Bakir, S. Kouidri, and R. Et-rey, Hub shape effects on the inducers performance under cavitation, IMECH E Part A, p.137, 2006.
DOI : 10.1243/09576509JPE137

I. Mejri, F. Bakir, R. Rey, and T. Belamri, Comparison of Computational Results Obtained from a Homogenious Cavitation Model with Experimental Investigations of three Inducers, Accepté au Journal of Fluids Engeneering, 2006.

H. Nakai, H. Horiguchi, M. Nakano, and Y. Et-tsujimoto, Cavitating Flows in Centrifugal Impellers and their Stability Analysis, Fifth International Symposium on Cavitation (CAV 2003, 2003.

R. Noguera, R. Rey, F. Massouh, F. Bakir, and S. Kouidri, ?Design and Analysis of Axial Pumps, Second Pumping Machinery Symposium, pp.95-111, 1993.

M. Nohmi and A. Et-goto, Cavitation CFD in Centrifugal Pump, Fifth International Symposium on Cavitation (CAV 2003). OS-4-010, 2003.

M. Oshima, A Study on Suction Performance of a Centrifugal Pump with an Inducer, Bulletin of JSME, vol.10, issue.42, pp.959-965, 1967.
DOI : 10.1299/jsme1958.10.959

R. Rey, F. Bakir, and R. Et-noguera, Conception et maîtrise du fonctionnement des turbomachines, 2001.

H. Rouse and J. S. Et-mcnown, Cavitation and Pressure Distribution, Head Forms at Zero Angle of Yaw, Iowa Institute of Hydraulic Research, 1948.

J. Sauer and G. H. Et-schnerr, Unstedy Cavitating Flow ? A New Cavitation Model Based on a Modified Front Capturing Method and Bubble Dynamics, Proceeding of the 2000 ASME Fluids Engineering summer conference, 2000.

A. K. Singhal, N. Vaidya, and A. D. Leonard, Multi-dimensional Simulation of Cavitating Flows Using a PDF Model for Phase Change, Proc. Of 1997 ASME Fluids Engineering Division Summer Meeting, pp.97-3272, 1997.

A. K. Singhal, M. M. Athavale, H. Li, and Y. Et-jiang, Mathematical Basis and Validation of the Full Cavitation Model, Journal of Fluids Engineering, vol.124, issue.3, pp.617-624, 2002.
DOI : 10.1115/1.1486223

C. C. Song and J. Et-he, ?Numerical Simulation of Cavitating Flows?, Proceeding of the 3 rd International Symposium on Cavitation. 7-10 avril, 1998.

R. Abgrall and R. Et-saurel, Discrete equations for physical and numerical compressible multiphase mixtures, Journal of Computational Physics, vol.186, issue.2, pp.361-396, 2003.
DOI : 10.1016/S0021-9991(03)00011-1

V. Ahuja, A. Hosangadi, and S. Et-arunjatesan, Simulations of Cavitating Flows Using Hybrid Unstructured Meshes, Journal of Fluids Engineering, vol.123, issue.2, pp.331-340, 2001.
DOI : 10.1115/1.1362671

A. Arabshahi, L. K. Taylor, and D. L. Whitfield, ÜNCLE: Toward A Comprehensive Time-Accurate Incompressible Navier-Stokes Flow Solver, AIAA-95-0050, AIAA 33rd Aerospace Sciences Meeting, 1955.

R. K. Avva, A. Singhal, and . D. Et-gibson, An Enthalpy Based Model of Cavitation, ASME FED v, vol.226, pp.63-70, 1995.

M. R. Barkhadarov, Semi-Lgrangian VOF Advection Method for FLOW-3D ® " . Flow Science Inc., FSI-03-TN63, 2003.

T. J. Barth and D. C. Et-jesperson, The Design and Application of Upwind Schemes on Unstructered Meshes, 1989.

C. E. Brennen, Hydrodynamics of Pumps, Concepts ETI, Inc, pp.128-138, 1994.
DOI : 10.1017/CBO9780511976728

C. E. Brennen, Cavitation and bubble dynamics, 1995.
DOI : 10.1017/CBO9781107338760
URL : http://authors.library.caltech.edu/25017/1/cavbubdynam.pdf

R. A. Bunnell and S. D. Heister, Three-Dimensional Unsteady Simulation of Cavitating Flows in Injector Passages, Journal of Fluids Engineering, vol.122, issue.4, pp.791-797, 2000.
DOI : 10.1115/1.1315590

F. X. Catelan, Modélisation Tridimensionnelle de la Cavitation Partielle dans les Turbomachines, Thèse de doctorat INPG, 1996.

Y. C. Chang, T. Y. Hou, B. Merriman, and S. Osher, A Level Set Formulation of Eulerian Interface Capturing Methods for Incompressible Fluid Flows, Journal of Computational Physics, vol.124, issue.2, pp.449-464, 1996.
DOI : 10.1006/jcph.1996.0072

Y. Chen and S. D. Et-heister, A Numerical Treatment for Attached Cavitation, Journal of Fluids Engineering, vol.116, issue.3, 1994.
DOI : 10.1115/1.2910321

Y. Chen and S. D. Et-heister, Modeling Hydrodynamic Nonequilibrium in Cavitating Flows, Journal of Fluids Engineering, vol.118, issue.1, pp.172-178, 1996.
DOI : 10.1115/1.2817497

?. Coutier, O. Delgosha, and J. L. Et-reboud, Numerical Simulation of the Unsteady Cavitation Behavior of an Inducer Blade Cascade, Proceeding of the 2000 ASME Fluids Engineering summer conference, 2000.
URL : https://hal.archives-ouvertes.fr/hal-00259414

A. J. Acosta, An Experimental Study of Cavitating Inducers " . 2 nd Symposium on Naval Hydrodynamics, Hydrodynamic Noise, Cavity flow, pp.25-29, 1958.

A. J. Acosta, Flow in inducer pumps, an aperçu, Proceedings 4th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, pp.1-13, 1993.

A. Arnone, P. Boncinelli, A. Capuani, E. Spano, and C. Et-rebattet, Ariane 5 TPLOX inducer design strategies to enhance cavitating performance, Proceedings, Fourth International Symposium on Cavitation CAV2001 session B7.004, 2001.

R. E. Arndt, Cavitation in Fluid Machinery and Hydraulic Structures, Annual Review of Fluid Mechanics, vol.13, issue.1, pp.273-328, 1981.
DOI : 10.1146/annurev.fl.13.010181.001421

F. Bakir, S. Kouidri, R. Noguera, and R. Et-rey, Design and Analysis of Axial Inducers Performance " . ASME Fluid machinery forum, pp.98-5118, 1998.

G. K. Batchelor, An Introduction to Fluid Dynamics, 1967.
DOI : 10.1017/CBO9780511800955

Y. Delannoy and J. L. Et-kueny, Cavity Flow Predictions Based on the Euler Equations, ASME Cavitation and Multiphase Flow Forum, 1990.

J. Friedrich and G. Et-kosyna, Rotating Cavitation in a Centrifugal Pump Impeller of Low Specific Speed, Journal of Fluids Engineering, vol.124, issue.2, pp.2-356, 2002.
DOI : 10.1115/1.1457451

T. Hashimoto, M. Yoshida, M. Watanabe, K. Kamijo, and Y. Et-tsujimoto, Experimental Study on Rotating Cavitation of Rocket Propellant Pump Inducers, Journal of Propulsion and Power, vol.13, issue.4, pp.488-494, 1997.
DOI : 10.2514/2.5210

R. Hirschi, P. Dupont, F. Avellan, J. N. Favre, J. F. Guelich et al., Centrifugal Pump Performance Drop Due to Leading Edge Cavitation: Numerical Predictions Compared With Model Tests, Journal of Fluids Engineering, vol.120, issue.4, pp.705-711, 1998.
DOI : 10.1115/1.2820727

A. Hosangadi, V. Ahuja, and R. J. Et-ungewitter, Simulations of Inducers at Low-Flow Off- Design Flow Conditions", ASME Fluids Engineering Conference -Fifth Pumping Machinery Symposium, 2005.

J. D. Huang, M. Aoki, and J. Et-zhang, Altenate blade cavitation on inducer, JSME Int J. Ser., B. 41, issue.1, pp.1-6, 1998.

I. Mejri, T. Belamri, and F. Et-bakir, CFX TascFlow TM 2.12 : Validation of the VOF Model on the LEMFI Inducer, CFX European Conference, pp.16-18, 2002.

I. Mejri, F. Bakir, S. Kouidri, and R. Et-rey, Hub shape effects on the inducers performance under cavitation, Fifth International Symposium on Cavitation (CAV 2003, 2003.
DOI : 10.1243/09576509JPE137

I. Mejri, F. Bakir, R. Rey, and T. Et-belamri, Comparison of Computational Results Obtained from a VOF Cavitation Model with Experimental Investigations of three Inducers - Part I: Experimental Investigations", ASME Fluids Engineering Conference -Fifth Pumping Machinery Symposium, 2005.

I. Mejri, F. Bakir, R. Rey, and T. Et-belamri, Comparison of Computational Results Obtained from a VOF Cavitation Model with Experimental Investigations of three Inducers - Part II: Numerical Approach", ASME Fluids Engineering Conference -Fifth Pumping Machinery Symposium, 2005.

I. Mejri, F. Bakir, S. Kouidri, and R. Et-rey, Influence of peripheral blade angle on performance and stability of axial inducers, Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, vol.125, issue.4, pp.289-301, 2005.
DOI : 10.1243/095765005X28580

I. Mejri, F. Bakir, S. Kouidri, and R. Et-rey, Hub shape effects on the inducers performance under cavitation, IMECH E Part A, p.137, 2006.
DOI : 10.1243/09576509JPE137

I. Mejri, F. Bakir, R. Rey, and T. Et-belamri, Comparison of Computational Results Obtained from a Homogenious Cavitation Model with Experimental Investigations of three Inducers, Accepté à Journal of Fluids Engeneering, 2006.

C. Offtinger, C. Henry, and R. Et-morel, Instabilité de fonctionnement en débit partiel d'un inducteur fretté. Comparaison avec le cas non fretté, ? 3ème journée cavitation, pp.31-38, 1996.

Y. Tsujimoto, Y. Yoshida, Y. Maekawa, S. Watanabe, and T. Et-hashimoto, Observations of Oscillating Cavitation of an Inducer, Journal of Fluids Engineering, vol.119, issue.4, pp.775-781, 1997.
DOI : 10.1115/1.2819497

Y. Tsujimoto, H. Horiguchi, and X. Et-qiao, Backflow from Inducer and its Dynamics", ASME Fluids Engineering Conference -Fifth Pumping Machinery Symposium, 2005.

O. Coutier-delgosha and J. L. Fortes-patella-et-reboud, Evaluation of the Turbulence Model Influence on the Numerical Simulations of Unsteady Cavitation, Journal of Fluids Engineering, vol.125, issue.1, pp.38-45, 2003.
DOI : 10.1115/1.1524584

A. Hosanghadi, V. Ahuja, and R. J. Ungewitter, Simulations of Inducers at Low-Flow Off-Design Flow Conditions", ASME Fluids Engineering Conference -Fifth Pumping Machinery Symposium, 2005.

C. Offtinger, C. Henry, and R. Morel, ? Instabilité de fonctionnement en débit partiel d'un inducteur fretté. Comparaison avec le cas non fretté, ? 3ème journée cavitation, pp.31-38, 1996.

S. A. Orszag, Renormalization Ggroup Modelling and Turbulence Simulations Near Wall Turbulent Flows, 1993.

J. L. Reboud, B. Stutz, and O. Et-coutier, Two-phase flowStructure of Cavitation: Experiment and Modeling of Unsteady Effects, Third International Symposium on Cavitation, 1998.

Y. Tsujimoto, Y. Yoshida, Y. Maekawa, S. Watanabe, and T. Hashimoto, Observations of Oscillating Cavitation of an Inducer, Journal of Fluids Engineering, vol.119, issue.4, pp.775-781, 1997.
DOI : 10.1115/1.2819497

Y. Tsujimoto, K. Kamijo, and C. E. Et-brennen, Unified Treatment of Flow Instabilities of Turbomachines, pp.17-20, 2001.

Y. Tsujimoto, H. Horiguchi, and X. Et-qiao, Backflow from Inducer and its Dynamics", ASME Fluids Engineering Conference -Fifth Pumping Machinery Symposium, 2005.