High performance PE compounds for safer gas and water transportation, Proceedings of the Plastic Pipes VIII, C2/2-1, Köningshof?near, 1992. ,
Analyse d'une série de résines à base de polyéthylène " , rapports d'essais campagnes, 2004. ,
Using high load melt flow rate measurements and their relationship with molecular weights to better understand the behavior of the PE resins, Proceedings of the Plastics Pipes XII, 2004. ,
Eltex® high density polyethylene ,
Récapitulatif des spécifications ou normes concernant le soudage bout à bout, 2003. ,
Mise à jour des spécifications pour le soudage bout à bout de tubes et d'accessoires gaz en PE de diamètre 125 mm à 315 mm, 2003. ,
Mise à jour des spécifications pour l'évaluation d'une machine souder bout à bout, 2003. ,
Plastifuse ? Mode d'emploi, J.SAURON S.A, 1997. ,
Test methodology for the determination of optimum fusion welding conditions of polyethylene, Journal of Applied Polymer Science, vol.38, issue.1, p.147, 1989. ,
DOI : 10.1002/app.1989.070380114
Characterization of PE welding mechanisms Application to electro-welding, Proceedings of the 1989 International Gas Research Conference, 1989. ,
Infrared microspectrometric study of the thermal history of fusion welding of polyethylene, Journal of Applied Polymer Science, vol.35, issue.6, p.1683, 1988. ,
DOI : 10.1002/app.1988.070350623
The modified stepwise isothermal segregation technique as a mean to detect fabrication drifts of polyethylene resins, Proceedings of the International Plastic Pipe Symposium, p.185, 1997. ,
The modified stepwise isothermal segregation technique as a mean to detect batch-to-batch variations in polyethylene, Proceedings of the Plastics Pipes IX, 1995. ,
Temperature-induced modifications of polyethylene resins during slow crack growth testing, Proceedings of the 16 th International Plastic Fuel Gas Pipe Symposium, 1999. ,
Thermal radiation heat transfer " . Fourth Edition, 2002. ,
La mise en forme des matières plastiques " . 3 e édition, 1996. ,
Using alkylbenzene sulphonates-based chemicals to go over the unefficiency of the current surfactants and to get more rapid and reliable evaluation of E.S.C. resistance of PE resins, Proceedings of the 17 th International Plastic Fuel Gas Pipe Symposium, pp.2-35291, 2002. ,
An assessment of the defects damages in polyethylene gas pipes, Proceedings of the 10th International Conference on Deformation, Yield and Fracture of Polymers, p.557, 1997. ,
Kinetics of Phase Change. I General Theory, The Journal of Chemical Physics, vol.7, issue.12, 1103. ,
DOI : 10.1063/1.1750380
Kinetics of Phase Change. II Transformation???Time Relations for Random Distribution of Nuclei, The Journal of Chemical Physics, vol.8, issue.2, p.212, 1940. ,
DOI : 10.1063/1.1750631
Granulation, Phase Change, and Microstructure Kinetics of Phase Change. III, The Journal of Chemical Physics, vol.9, issue.2, p.177, 1941. ,
DOI : 10.1063/1.1750872
The laws of expanding circles and spheres in relation to the lateral growth of surface films and the grain-size of metals, Transactions of the Faraday Society, vol.41, p.365, 1945. ,
DOI : 10.1039/tf9454100365
Kinetics of non-isothermal crystallization, Polymer, vol.12, issue.3, p.150, 1971. ,
DOI : 10.1016/0032-3861(71)90041-3
Some aspects of nonisothermal crystallization of polymers. I. Relationship between crystallization temperature, crystallinity, and cooling conditions, Journal of Applied Polymer Science, vol.16, issue.5, 1077. ,
DOI : 10.1002/app.1972.070160503
Some aspects of nonisothermal crystallization of polymers. II. Consideration of the isokinetic condition, Journal of Applied Polymer Science, vol.17, issue.4, p.1031, 1973. ,
DOI : 10.1002/app.1973.070170404
Correlations for the quiescent crystallization kinetics of isotactic polypropylene and poly(ethylene terephthalate), Polymer, vol.36, issue.7, p.1455, 1995. ,
DOI : 10.1016/0032-3861(95)95925-Q
A new kinetic model for anisothermal metallurgical transformations in steels including effect of austenite grain size, Acta Metallurgica, vol.32, issue.1, p.137, 1984. ,
DOI : 10.1016/0001-6160(84)90211-6
Modélisation et calcul de l'évolution de la température et de la microstructure au cours du refroidissement des aciers, Thése de doctorat à l'INPL, 1985. ,
Modélisation du soudage en continu de composites à matrice thermoplastique, Thèse de doctorat, 2005. ,
Crystallization kinetics of polyetheretherketone (peek) matrices, Polymer Engineering and Science, vol.23, issue.22, p.1574, 1986. ,
DOI : 10.1002/pen.760262208
Modified avrami equation for the bulk crystallization kinetics of spherulitic polymers, Journal of Polymer Science Part A: General Papers, vol.3, issue.9, p.3067, 1965. ,
DOI : 10.1002/pol.1965.100030902
Theory of phase transition kinetics with growth site impingement. I. Homogeneous nucleation, Journal of Polymer Science: Polymer Physics Edition, vol.12, issue.2, p.399, 1974. ,
DOI : 10.1002/pol.1974.180120212
The theory of phase transition kinetics with growth site impingement. II. Heterogeneous nucleation, Journal of Polymer Science: Polymer Physics Edition, vol.14, issue.12, p.2253, 1976. ,
DOI : 10.1002/pol.1976.180141210
Theory of phase transition kinetics with growth site impingement. III. Mixed heterogeneous???homogeneous nucleation and nonintegral exponents of the time, Journal of Polymer Science: Polymer Physics Edition, vol.15, issue.12, p.2269, 1977. ,
DOI : 10.1002/pol.1977.180151217
An Avrami-based model for the description of the secondary crystallization of polymers, Journal of Macromolecular Science, Part B, vol.35, issue.3, p.35295, 1996. ,
DOI : 10.1080/00222349608220382
Etude expérimentale et calcul des contraintes résiduelles dans les tubes extrudés en polyéthylène, Thèse de doctorat, 2002. ,
Modelling of the Cooling of Semi-crystalline Polymers during their Processing, International Polymer Processing, vol.6, issue.4, p.348, 1991. ,
DOI : 10.3139/217.910348
Preparation and study of separated single crystals of extended-chain polyethylene, Journal of Polymer Science: Polymer Physics Edition, vol.15, issue.11, 1905. ,
DOI : 10.1002/pol.1977.180151103
Welding of PEEK/carbon fiber composite laminates, SAMPE Journal, vol.25, issue.1, p.35, 1989. ,
Characteristics of resistance welding of lap-shear coupons. Part III. Crystallinity, Composites Part A: Applied Science and Manufacturing, vol.29, issue.8, p.921, 1998. ,
DOI : 10.1016/S1359-835X(98)00024-4
La mise en forme des matières plastiques " . 3 e édition, 1996. ,
Modeling of morphology evolution in the injection molding process of thermoplastic polymers, Progress in Polymer Science, p.1185, 2005. ,
DOI : 10.1016/j.progpolymsci.2005.09.001
On the simulation of thermoplastic injection molding process. Part 2. Relevance of interaction between flow and crystallisation " . International Polymer Processing, p.45, 1997. ,
Relevance of Crystallisation Kinetics in the Simulation of the Injection Molding Process, International Polymer Processing, vol.16, issue.1, p.61, 2001. ,
DOI : 10.3139/217.1620
Measurements of the rheological behavior of a crystallizing polymer by an ???inverse quenching??? technique, Journal of Rheology, vol.47, issue.2, p.563, 2003. ,
DOI : 10.1122/1.1545080
Shear-Induced Crystallization of Poly(??-caprolactone). 2. Evolution of Birefringence and Dichroism, Macromolecules, vol.33, issue.17, p.6466, 2000. ,
DOI : 10.1021/ma000243b
Rheology and structure of isotactic polypropylene near the gel point: quiescent and shear-induced crystallization, Polymer, vol.42, issue.21, 2001. ,
DOI : 10.1016/S0032-3861(01)00402-5
Shear-induced crystallization of polypropylene melts, Proceedings of the international congress on rheology, 2000. ,
Polypropylene Crystallization as a Physical Gelation Process, Macromolecules, vol.31, issue.23, p.8164, 1998. ,
DOI : 10.1021/ma980134l
Polypropylene during crystallization From the melt as a model for the rheology of molten-filled polymers, Journal of Applied Polymer Science, vol.60103, 1996. ,
Polymer Crystallization in Melt Spinning, High-speed fiber spinning, p.207, 1985. ,
DOI : 10.2115/fiber.38.9_P434
Simulation of dynamics and structure formation in highspeed melt spinning, High-speed fiber spinning, p.173, 1985. ,
Shrinkage Prediction for Slowly-Crystallizing Thermoplastic Polymers in Injection Molding, International Polymer Processing, vol.12, issue.3, p.228, 1997. ,
DOI : 10.3139/217.970228
On the flow of crystallizing polymers, Journal of Non-Newtonian Fluid Mechanics, vol.112, issue.2-3, p.251, 2003. ,
DOI : 10.1016/S0377-0257(03)00104-6
Rheology of Suspensions in Polymeric Liquids, Journal of Rheology, vol.29, issue.6, p.739, 1985. ,
DOI : 10.1122/1.549808
The temperature dependence of the local free volume in polyethylene and polytetrafluoroethylene: A positron lifetime study, Journal of Polymer Science Part B: Polymer Physics, vol.36, issue.9, p.1513, 1998. ,
DOI : 10.1002/(SICI)1099-0488(19980715)36:9<1513::AID-POLB9>3.0.CO;2-K
THE CONFORMATIONAL MECHANISM OF THERMOELASTICITY OF ORIENTED POLYETHYLENE, International Journal of Polymeric Materials, vol.22, issue.2, p.173, 2004. ,
DOI : 10.1002/pol.1980.180181201
The effect of joining conditions in the butt fusion of polyethylene pipes, Proceedings of the Tenth Plastic Fuel Gas Pipe Symposium, p.38, 1987. ,
The dependence of butt fusion bond strength on joining conditions for polyethylene pipe, Polymer Engineering and Science, vol.18, issue.19, p.1387, 1989. ,
DOI : 10.1002/pen.760291910
A finite element approach to butt fusion welding analysis, Proceedings of the Institution of Mechanical Engineers, p.95, 1990. ,
DOI : 10.1243/PIME_PROC_1990_204_172_02
Modelling of the butt fusion welding process, Chemical Engineering Science, vol.46, issue.1, p.135, 1991. ,
DOI : 10.1016/0009-2509(91)80123-G
Butt fusion joining of polyethylene pipes : a theoretical approach, Advances in Joining Plastics and Composites, p.188, 1991. ,
The Butt-fusion welding of polymers, Chemical Engineering Science, vol.48, issue.17, p.3071, 1993. ,
DOI : 10.1016/0009-2509(93)80173-N
Simulation numérique par éléments finis en 3D du comportement thermomécanique au cours du traitement d'aciers : application à la trempe de pièces forgées ou coulées, Thèse de doctorat, 2000. ,
Contribution à la simulation numérique tridimensionnelle du forgeage à froid, Thèse de doctorat, 1995. ,
A stable finite element for the stokes equations, Calcolo, vol.21, issue.4, p.337, 1984. ,
DOI : 10.1007/BF02576171
Newer end newer elements for incompressible flows " . Finite Element in Fluids, p.171, 1985. ,
Stable stabilized finite element for 3d forming calculation, 1996. ,
Modélisation tridimensionnelle du couplage thermique en forgeage, Thèse de doctorat, 1990. ,
Contribution à la modélisation thermo-mécanique et physique du forgeage à chaud, Thèse de doctorat, 1993. ,