]. A. Abrão and D. K. , Temperature evaluation of cutting tools during machining of hardened bearing steel.using polycrystalline cubic boron nitride and ceramic cutting tools, Materials Science and Technology, vol.5, issue.5, pp.445-450, 1997.
DOI : 10.1179/030716983803291578

S. Akcan, S. Shah, S. P. Moylan, P. N. Chhabra, S. Chandraseksar et al., Formation of white layers in steels by machining and their characteristics, Metallurgical and Materials Transactions A, vol.8, issue.1???4, pp.1245-1254, 2002.
DOI : 10.1007/s11661-002-0225-z

]. G. Ambrogio, L. Filice, R. Shivpuri, and D. , Umbrello Application of NN technique door predicting the residual stress profiles during hard turning of AISI 52100 steel, The 9 th International Conference on Material Forming. ESAFORM, pp.595-598, 2006.

]. V. Babitsky, A. N. Kalashnikov, and F. , Autoresonant control of ultrasonically assisted cutting, Mechatronics, vol.14, issue.1, pp.91-114, 2004.
DOI : 10.1016/S0957-4158(03)00014-X

P. Levet and P. Dal-santo, Robert Mechanical and thermal behaviour of the tool-material couple in the process of turning with active cutting coolants and lubricants, Proceeding of the 2 nd International Conference on Tribology in Manufacturing Process (ITCMP), pp.137-144, 2004.

]. A. Barbacki, M. Kawalec, and A. , Turning and grinding as a source of microstructural changes in the surface layer of hardened steel, Journal of Materials Processing Technology, vol.133, issue.1-2, pp.21-25, 2003.
DOI : 10.1016/S0924-0136(02)00211-X

]. Battaglia, O. Cois, L. Puigsegur, and A. , Solving an inverse heat conduction problem using a non-integer identified model, International Journal of Heat and Mass Transfer, vol.44, issue.14, pp.2671-2680, 2001.
DOI : 10.1016/S0017-9310(00)00310-0

R. Aachen, Berktold Drehraümen gehärteter stahlwerkstoffe, 1992.

]. G. Bittès, Contribution à la connaissance des mécanismes fondamentaux liés à l'usinabilité des aciers de construction mécanique, 1993.

]. S. Bosheh and P. , White layer formation in hard turning of H13 tool steel at high cutting speeds using CBN tooling, International Journal of Machine Tools and Manufacture, vol.46, issue.2, pp.225-233, 2006.
DOI : 10.1016/j.ijmachtools.2005.04.009

]. Fp and K. Bowden, Ridler The surface temperature of sliding metals, Proceeding of the Royal Society of London. Series A, Mathemical and Physical Sciences, vol.154, pp.640-656, 1936.

]. E. Brinksmeier and T. , Brockhoff White layers in machining steels, Proceedings of the 2, 1999.

]. Y. Chou and C. J. , White layers and thermal modeling of hard turned surfaces, International Journal of Machine Tools and Manufacture, vol.39, issue.12, pp.1863-1881, 1999.
DOI : 10.1016/S0890-6955(99)00036-X

]. Y. Chou and H. , Thermal modeling for white layer predictions in finish hard turning, International Journal of Machine Tools and Manufacture, vol.45, issue.4-5, pp.481-495, 2005.
DOI : 10.1016/j.ijmachtools.2004.09.006

F. Produit, Saint-diés-des-Vosges, France, 2004.

P. Du and P. Lacombe, Membre de l'Académie des Sciences. Ivry-sur-Seine, 1992.

]. P. Dahlman and M. Escursell, High-pressure jet-assisted cooling: a new possibility for near net shape turning of decarburized steel, International Journal of Machine Tools and Manufacture, vol.44, issue.1, pp.10-115, 2004.
DOI : 10.1016/S0890-6955(03)00058-0

]. P. Dahlman, F. Gunnberg, and M. , The influence of rake angle, cutting feed and cutting depth on residual stresses in hard turning, Journal of Materials Processing Technology, vol.147, issue.2, pp.181-184, 2004.
DOI : 10.1016/j.jmatprotec.2003.12.014

E. Thèse and . Tarbes, N° d'ordre, p.1841, 1998.

]. M. Davies, T. J. Burns, and C. J. , On the Dynamics of Chip Formation in Machining Hard Metals, CIRP Annals - Manufacturing Technology, vol.46, issue.1, pp.25-30, 1997.
DOI : 10.1016/S0007-8506(07)60768-9

]. D. Dudzinski and A. , A modelling of cutting for viscoplastic materials, International Journal of Mechanical Sciences, vol.39, issue.4, pp.369-389, 1997.
DOI : 10.1016/S0020-7403(96)00043-4

]. H. Eda, K. Kishi, and S. , The Formation Mechanism of Ground White Layers, Bulletin of JSME, vol.24, issue.190, pp.743-747, 1981.
DOI : 10.1299/jsme1958.24.743

]. M. Elbestawi, A. K. Srivastava, and T. , A Model for Chip Formation During Machining of Hardened Steel, CIRP Annals - Manufacturing Technology, vol.45, issue.1, pp.71-76, 1996.
DOI : 10.1016/S0007-8506(07)63019-4

V. Mansori, P. Iordache, and D. Seitier, Paulmier Improving surface wearing of tools by magnetization when cutting dry

]. T. El-wardany, E. Mohammed, and M. A. , Cutting temperature of ceramic tools in high speed machining of difficult-to-cut materials, International Journal of Machine Tools and Manufacture, vol.36, issue.5, pp.611-634, 1996.
DOI : 10.1016/0890-6955(95)00043-7

]. T. El-wardany, H. A. Kishawy, and M. A. , Surface Integrity of Die Material in High Speed Hard Machining, Part 1: Micrographical Analysis, Journal of Manufacturing Science and Engineering, vol.122, issue.4, pp.620-631, 2000.
DOI : 10.1115/1.1286367

]. T. Eyre and A. Baxter, The formation of white layers at rubbing surfaces. Tribology 5, pp.256-261, 1972.

]. M. Field and J. , Kahles Review of surface integrity of machined components. Keynote paper n°6, Annals of CIRP, vol.20, issue.2, pp.153-163, 1971.

]. P. Follansbee and U. F. , Kocks A constitutive description of the deformation of copper based on the use of the mechanical threshold stress as an internal state variable, 1988.

]. G. Germain, F. Morel, J. Lebrun, A. Morel, and B. , Huneau Surface integrity of laser assisted machining parts The 9th, International ESAFORM Conference on Material Forming ESAFORM, pp.615-618, 2006.

]. M. Groover and G. E. , Kane A continuing study in the determination of temperatures in metal cutting using remote thermocouple, Journal of Engineering for Industry, pp.603-608, 1971.

]. Y. Guo and W. Dale, An experimental investigation of white layer on rolling contact fatigue using acoustic emission technique, International Journal of Fatigue, vol.27, issue.9, pp.1051-1061, 2005.
DOI : 10.1016/j.ijfatigue.2005.03.002

]. Y. Guo, Q. Wen, and K. A. , Dynamic Material Behavior Modeling Using Internal State Variable Plasticity and Its Application in Hard Machining Simulations, Journal of Manufacturing Science and Engineering, vol.128, issue.3, pp.749-759, 2006.
DOI : 10.1115/1.2193549

M. Habak, C. Fischer, and J. , Lebrun Rôle de l'assistance jet d'eau haute pression sur les contraintes

]. M. Habak, J. Lebrun, S. Waldmann, P. Robert, and C. , Fischer Residual stress in high pressure water jet assisted turning of austenitic stainless steel, Materials Science Forum. Vols, pp.524-525, 2006.

M. Habak, J. Lebrun, A. Braud, and B. , Huneau Tournage cBN du 100Cr6 durci à 55HRc, 5èmes Journées de Mécanique. Résumé p158 -Publication sur CD Rom. École Militaire Polytechnique, 2006.

M. Habak, J. Lebrun, B. Huneau, G. Germain, and P. , Robert Effect of carbides and cutting parameters on the chip morphology and cutting temperature during orthogonal hard turning of 100Cr6 bearing steel with a cutting tool, pp.517-524, 2006.

]. S. Hong, I. Markus, and W. , New cooling approach and tool life improvement in cryogenic machining of titanium alloy Ti-6Al-4V, International Journal of Machine Tools and Manufacture, vol.41, issue.15, pp.2245-2260, 2001.
DOI : 10.1016/S0890-6955(01)00041-4

R. Hou, Modeling of thermomechanical shear instability in machining, International Journal of Mechanical Sciences, vol.39, issue.11, pp.1273-1314, 1997.
DOI : 10.1016/S0020-7403(97)00017-9

]. J. Hua, R. Shivpuri, X. Cheng, V. Bedekar, Y. Matsumoto et al., Watkins Effect of feed rate, workpiece hardness and cutting edge on subsurface residual stress in the hard turning of bearing steel using chamfer + hone cutting edge geometry, Materials Science, pp.238-248, 2005.

M. Jacobson, P. Dahlman, and F. , Gunnberg Cutting speed influence on surface integrity of hard turned bainite steel, Journal of Materials. Processing Technology, vol.128, pp.1-3, 2002.

]. G. Johnson and W. H. Cook, A constitutive model and data for metals subjected to large strains, high rates and high temperatures The Hague, the Netherlands, Proceedings of the Seventh International Symposium on Ballastics, pp.541-547, 1983.

]. P. Joyot, R. Rakotomalala, and M. , Touratier Modélisation de l'usinage formulée en, Euler Lagrange Arbitraire Journal Physics, vol.3, pp.1141-1144, 1993.

]. J. Kaminski and B. , Temperature reduction in the cutting zone in water-jet assisted turning, Journal of Materials Processing Technology, vol.106, issue.1-3, pp.68-73, 2000.
DOI : 10.1016/S0924-0136(00)00640-3

]. H. Kishawy and M. A. , Elbestawi Effect of process parameters on chip formation when machining hardened steel. International Mechanical Engineering Congress and Expansion, ASME-MED 6-2, pp.62-66, 1997.

]. T. Kitagawa, K. Katsuhiro, and A. , Kudo Plasma hot machining for high hardness metals, 1988.

]. R. Komanduri and R. H. , Brown The mechanics of chip segmentation in machining, 1981.

]. R. Komanduri, T. Schroeder, B. F. Von-turkovich, J. Hazra, and D. G. , On the Catastrophic Shear Instability in High-Speed Machining of an AISI 4340 Steel, Journal of Engineering for Industry, vol.104, issue.2, pp.121-131, 1982.
DOI : 10.1115/1.3185807

]. R. Komanduri and Z. B. , A review of the experimental techniques for the measurement of heat and temperatures generated in some manufacturing processes and tribology, Tribology International, vol.34, issue.10, pp.653-682, 2001.
DOI : 10.1016/S0301-679X(01)00068-8

]. R. Kovaçevic, C. Cherukuthota, and M. , Mazurkiewicz High pressure water jet cooling/lubrication to improve machining efficiency in milling, International Journal of Machine Tools and Manufacture, vol.35, pp.10-1459, 1995.

. Thèse-de-mécanique, Université de bordeaux, N° d'ordre, p.2935, 2004.

]. E. Lee and B. W. , Schaffer The theory of plasticity applied to a problem of machining, Journal of applied mechanics, pp.405-413, 1951.

]. Ff and T. Ling, Simkins Measurement of point wise junction condition of temperature at the interface of two bodies in sliding contact, Trans ASME, J Basic Engineering, vol.85, pp.481-487, 1963.

]. S. Lo-casto, E. Lo-valvo, and F. , Measurement of temperature distribution within tool in metal cutting. Experimental tests and numerical analysis, Journal of Mechanical Working Technology, vol.20, pp.35-46, 1989.
DOI : 10.1016/0378-3804(89)90016-8

]. G. Maeder, J. L. Lebrun, and J. M. , Sprauel Détermination par diffraction des rayons X des contraintes internes. Aspects macro et microscopiques. Physique et mécanique de la mise en forme des matériaux, Edition presses du CNRS-IRSID, pp.135-155, 1990.
DOI : 10.1051/mattech/198876090005

]. G. Maeder and J. L. , Lebrun Contraintes résiduelles et mise en forme. Physique et mécanique de la mise en forme des matériaux, Edition presses du CNRS-IRSID, pp.616-624, 1990.

M. Barash and C. R. , Liu Effect of Hardness on the Surface Integrity of AISI 4340, Steel Journal of Engineering for Industry, vol.1083, pp.169-175, 1986.

M. M. Barash and C. R. , Liu Cutting mechanism during machining of hardened steed, Materials Science and Technology, vol.13, pp.229-305, 1987.

]. A. Mkaddem, M. Habak, and J. , Lebrun Couple damage-plasticity prediction model of residual stress in sheet forming processes, Far East Journal of Applied Mathematics, vol.23, pp.1-91, 2006.

]. A. Molinari and D. , Dudzinski Stationary shear band in high speed machining, Journal of Mechanics of Solid, pp.399-405, 1992.

]. A. Moufki, A. Molinari, and D. , Dudzinski Modelling of orthogonal cutting with a temperature dependent friction law, Journal Mechanics and Physics Solids, vol.46, pp.10-2103, 1998.

]. A. Moufki, D. Dudzinski, A. Molinari, and M. Rausch, Thermoviscoplastic modelling of oblique cutting: forces and chip flow predictions, International Journal of Mechanical Sciences, vol.42, issue.6, pp.61205-1232, 2000.
DOI : 10.1016/S0020-7403(99)00036-3

]. R. Saoubi, J. L. Lebrun, and B. Changeux, A new method for cutting tool temperature measurement using CCD infrared technique: influence of tool and cutting, Machining Science and Technology, vol.2, 1998.

]. R. Saoubi, J. C. Outeiro, B. Changeux, J. Lebrun, and M. Dias, Residual stress analysis in orthogonal machining of standard and resulfurized AISI 316L steels, Journal of Materials Processing Technology, vol.96, pp.225-233, 1999.

]. R. Saoubi and H. Chandrasekaran, Investigation of the effects of tool micro-geometry and coating on tool temperature during orthogonal turning of quenched and tempered steel, International Journal of Machine Tools & Manufacture, vol.44, pp.213-224, 2004.

]. G. Poulachon, A. L. Moisan, and M. , Dessoly A contribution to the study of the cutting mechanisms in hard turning Mécanique & Industries 3, pp.291-299, 2002.

]. G. Poulachon, A. Albert, M. Schluraff, and S. , An experimental investigation of work material microstructure effects on white layer formation in PCBN hard turning, International Journal of Machine Tools and Manufacture, vol.45, issue.2, pp.211-218, 2005.
DOI : 10.1016/j.ijmachtools.2004.07.009

]. A. Ramesh, S. N. Melkote, L. F. Allard, L. Riester, and T. R. , Watkins Analysis of white layers formed in hard turning of AISI 52100 steel Materials Science and Engineering A 390, pp.88-97, 2005.

]. J. Rech and A. , Surface integrity in finish hard turning of case-hardened steels, International Journal of Machine Tools and Manufacture, vol.43, issue.5, pp.543-550, 2003.
DOI : 10.1016/S0890-6955(02)00141-4

]. S. Rosseto and U. , Koch An investigation of temperature distribution on tool flank surface, Annals of the CIRP, vol.XVIV, pp.551-557, 1971.

]. E. Schreiber and H. , Schlicht Residual stresses after turning of hardened components. Residual stresses in science and technology, pp.853-860, 1987.

]. M. Shaw and A. , Heat-Affected Zones in Grinding Steel, CIRP Annals - Manufacturing Technology, vol.43, issue.1, pp.279-282, 1994.
DOI : 10.1016/S0007-8506(07)62213-6

]. C. Shet, X. Deng, and A. , Finite element simulation of high-pressure water-jet assisted metal cutting, International Journal of Mechanical Sciences, vol.45, issue.6-7, pp.1201-1228, 2003.
DOI : 10.1016/S0020-7403(03)00142-5

]. S. Semiatin and J. J. , Jonas Formability and workability of metals: plastic instability and flow localization, p.627, 1984.

]. R. Snoeys, M. Maris, and J. Peters, Thermally induced damage in grinding, Annals of the CIRP, vol.27, issue.2, pp.571-581, 1978.

]. D. Steinberg, S. G. Cochran, and M. W. Guinan, A constitutive model for metals applicable at high???strain rate, Journal of Applied Physics, vol.51, issue.3, p.80465, 1979.
DOI : 10.1063/1.327799

]. J. Thiele, S. N. Melkote, R. A. Peascoe, and T. R. , Effect of Cutting-Edge Geometry and Workpiece Hardness on Surface Residual Stresses in Finish Hard Turning of AISI 52100 Steel, Journal of Manufacturing Science and Engineering, vol.122, issue.4, pp.642-649, 2000.
DOI : 10.1115/1.1286369

]. E. Trent and E. F. , Smart Distribution de la température dans les outils de coupe des aciers, 1981.
DOI : 10.1051/mattech/198169080291

]. A. Warren, Y. B. Guo, and M. L. , The influence of machining induced residual stress and phase transformation on the measurement of subsurface mechanical behavior using nanoindentation, Surface and Coatings Technology, vol.200, issue.11, pp.3459-3467, 2006.
DOI : 10.1016/j.surfcoat.2004.12.028

]. C. Zener and J. , Effect of Strain Rate Upon Plastic Flow of Steel, Journal of Applied Physics, vol.15, issue.1, pp.22-32, 1944.
DOI : 10.1063/1.1707363

]. F. Zerilli and R. W. Armstrong, Dislocation???mechanics???based constitutive relations for material dynamics calculations, Journal of Applied Physics, vol.61, issue.5, pp.1816-1825, 1987.
DOI : 10.1063/1.338024

R. Zbigniew-zurecki and J. H. Ghosh, Investigation of white layers formed in conventional and cryogenic hard turning of steels. International Machine Engineering Congress and Exposition, pp.16-21, 2003.

I. Tableau, Evolutions du coefficient de frottement en fonction des paramètres d'essais, p.52

I. Tableau, Conditions expérimentales pour les essais de compression quasi-statique, p.56

I. Tableau, Conditions expérimentales pour les essais en dynamique des éprouvettes chapeaux, p.62

I. Tableau, Conditions expérimentales de coupe retenues pour les essais de chariotage, p.83

I. Tableau, Paramètres utilisés pour l'analyse des contraintes résiduelles, p.97

I. Tableau, Conditions expérimentales utilisées pour étudier l'effet du revêtement, p.105

I. Tableau and 2. , Caractéristiques géométriques de la plaquette cBN utilisée en coupe, p.112

I. Tableau and 2. , Conditions expérimentales de coupe retenues pour les essais de coupe, p.112