B. Abbaszadeh-mir, J. R. Mayer, G. Cloutier, and C. Fortin, Theory and simulation for the identification of the link geometric errors for a five-axis machine tool using a telescoping magnetic ball-bar, International Journal of Production Research, vol.32, issue.18, pp.18-4781, 2002.
DOI : 10.1016/0278-6125(91)90058-A

L. Arriba, E. Trapet, M. Bartscher, M. Franke, A. Balsamo et al., Methods and Artifacts to calibrate large CMMs, Proc. 1 st International EUSPEN Conference Asch et coll, pp.391-394, 1999.

S. [. Attia and . Fraser, A generalized modelling methodology for optimized real-time compensation of thermal deformation of machine tools and CMM structures, International Journal of Machine Tools and Manufacture, vol.39, issue.6, pp.1001-1016, 1999.
DOI : 10.1016/S0890-6955(98)00063-7

. [. Bernard, Fabrication assistée par ordinateur" Hermès Science Publication, 2003.

M. [. Birch and . Downs, An updated Edlen equation for the refractive index of Air" Metrologia, Vol, vol.30, pp.155-162, 1993.

M. [. Birch and . Downs, Correction to the updated Edlen equation for the refractive index of Air" Metrologia, Vol, vol.31, pp.315-316, 1994.

A. [. Bourdet and . Clement, Controlling a complex surface with a 3 axis measuring machine, Annals of the CIRP, vol.25, issue.1, pp.354-361, 1976.

. [. Bowden, Stretched wire mechanics" Proceeding of the 8th International Workshop on Accelerator Alignment ; Genève ; eConf C04100411, 2004.

R. [. Broderick and . Cirpa, A Method for Determining and Correcting Robot Position and Orientation Errors Due to Manufacturing, Journal of Mechanisms Transmissions and Automation in Design, vol.110, issue.1, pp.3-10, 1988.
DOI : 10.1115/1.3258902

D. [. Bryan and . Carter, Design of a new error-corrected coordinate-measuring machine, Measurement Science Conference, 1981.

J. [. Caenen, Angue "Identification of geometric and non geometric parameters of robots, IEEE International Conference on Robotics and Automation, pp.1032-1037, 1990.

. [. Chaib, Contribution à l'étude de la précision des robots, 1994.

]. H. Cha06a, E. Chanal, P. Duc, and . Ray, A study of the impact of machine tool structure on machining processes, International Journal of Machine Tools and Manufacture, vol.46, pp.2-98, 2006.

]. H. Cha06b, M. Chanal, E. Rauch, J. Duc, P. Hascoët et al., Identification géométrique des machines outils à structure parallèle : Proposition d'une méthode basée sur l'usinage d'une pièce" 4e Assises Machines et Usinage Grande Vitesse, Aix-en-provence, pp.197-206, 2006.

L. [. Chen and . Chao, Positionning error analysis for robot manipulators with all rotary joints, IEEE Journal of Robotics and Automation, pp.539-545, 1987.

. [. Clavel, Conception d'un robot parallèle rapide à 4 degrés de libertés Thèse de doctorat ; EPFL ; Lausanne, 1991.

. [. David, Correction par logiciel des défauts de géométrie d'une machine à mesurer, E.N.S.A.M. Lille, Rapport Interne S.E.R.A.M, 1983.

. [. David, Introduction à la structure D.M.T, Rapport interne E.N.S.A.M, 1986.

]. J. Dav93a and . David, Le contrôle de géométrie des machines-outils, un passage obligé pour la qualité, 1993.

]. J. Dav93b, T. David, and . Coorevits, Les limites de la correction par logiciel des erreurs de géométrie des M.M.T. : Définition d'une architecture nouvelle de machine" 6ème Congrès International de métrologie, 1993.

S. [. David, G. Leleu, T. Diolez, and . Roux, Evaluation de la géométrie des machines : présentation d'une méthode innovante" 10ème Congrès International de métrologie, 2001.

R. [. Denavit and . Hartenberg, A Kinematic notation for lower-pair mechanism based on matrices, Journal of Applied Mechanism Vol, vol.22, pp.215-221, 1955.

S. [. Donaldson and . Patterson, Design and construction of large vertical axis diamond turning machine" Proceedings of the SPIE -The International Society for, Optical Engineering Vol, vol.433, pp.62-67, 1983.

F. [. Ducourtieux, S. Larsonnier, L. Duhem, J. Lahousse, J. Salgado et al., Le programme de recherche et développement en nanométrologie du BNM- LNE" 11th International metrology congress, 2003.

K. [. Duelen and . Schroer, Robot calibration???Method and results, Robotics and Computer-Integrated Manufacturing, vol.8, issue.4, pp.4-223, 1991.
DOI : 10.1016/0736-5845(91)90034-P

. [. Edlen, The refractive index of air" Metrologia, pp.71-80, 1966.

. [. Ernst, Digital Linear and Angular Metrology Verlag moderne industrie ; Lech, 1998.

. [. Fournier, Génération de mouvement en robotique, application des inverses généralisées et des pseudo-inverses" Thèse d'état, USTL Montpellier, 1980.

. [. Gough, Contribution to discussion of papers on research in automobile stability, control and tyre performance" Proceeding of Automotive Division Instrum, Eng, 1956.

H. [. Hüser, E. Schwenke, F. Trapet, U. Wäldele, and . Wiegand, Calibration of coordinate measuring machines based on ball plates, Proc. XIII IMEKO World Congress, pp.1646-1651, 1994.

J. [. Khalil and . Kleinfinger, A new geometric notation for open and closed-loop robots, Proceedings. 1986 IEEE International Conference on Robotics and Automation, pp.1174-1179, 1986.
DOI : 10.1109/ROBOT.1986.1087552

J. [. Khalil, . Caenen, . Ch, and . Enguehard, Identification and calibration of the geometric parameters of robots, Proc. Int. Symp. on Experimental Robotics, 1989.
DOI : 10.1007/BFb0042539

E. [. Khalil and . Dombre, Modélisation, identification et commande des robots" Hermès ; Paris, 1999.

[. Koba, KOBA reference masters Catalogue des produits, 2004.

. [. Hayati, Robot arm geometric link parameter estimation, The 22nd IEEE Conference on Decision and Control, pp.1477-1483, 1983.
DOI : 10.1109/CDC.1983.269783

[. Moon, Y. Moon, S. Kota, and R. G. Landers, Screw theory based metrology for design and error compensation of machine tools" Design Engineering Technical Conferences, pp.1-11, 2001.

. [. Neumann, . Neos, and . Ab, System and method for controlling a robot" United States Patent US6301525, 2001.

Y. [. Okafor and . Ertekin, Derivation of machine tool error models and error compensation procedure for three axes vertical machining center using rigid body kinematics, International Journal of Machine Tools and Manufacture, vol.40, issue.8, pp.1199-1213, 2000.
DOI : 10.1016/S0890-6955(99)00105-4

. [. Penrose, A generalized inverse for matrices, Mathematical Proceedings of the Cambridge Philosophical Society, vol.11, issue.03, pp.406-413, 1955.
DOI : 10.1093/qmath/2.1.189

S. [. Press, W. T. Teukolsky, B. P. Vetterling, and . Flannery, Numerical recipes in C -The art of Scientific Computing 2nd Edition, 1992.

. [. Pujo, Robsilon : un outil de simulation pour appréhender et identifier des caractéristiques métrologiques sur les robots industriels polyarticulés" 6ème Congrès International de Métrologie, pp.102-107, 1993.

. [. Pujo, Contribution à la définition d'une modélisation technologique des robots industriels, Thèse de doctorat, 1994.

J. [. Rhaman, K. Heikkala, and . Lappalainen, Modeling, measurement and error compensation of multi-axis machine tools. Part I: theory, International Journal of Machine Tools and Manufacture, vol.40, issue.10, pp.1535-1546, 2000.
DOI : 10.1016/S0890-6955(99)00101-7

]. R. Ram00a, M. A. Ramesh, A. N. Mannan, and . Poo, Error compensation in machine tools-a review Part I: geometric, cuttingforce induced and fixture-dependent errors, International Journal of Machine Tools and Manufacture Vol, vol.40, pp.1235-1256, 2000.

]. R. Ram00b, M. A. Ramesh, A. N. Mannan, and . Poo, Error compensation in machine tools-a review Part II: thermal errors, International Journal of Machine Tools and Manufacture Vol, vol.40, pp.1257-1284, 2000.

[. Renishaw, Catalogue générale : Codeur rotatif RX10, Documents RENISHAW, 2005.

[. Renishaw, Codeurs linéaires optiques" et "Codeurs interférométriques à laser, Documents RENISHAW, 2006.

. [. Riout, Capteurs industriels : technologie et méthodes de choix 3C16" CETIM ; Paris, 1987.

F. [. Schwenke, K. Härtig, F. Wendt, and . Wäldele, Future challenges in co-ordinate metrology : Adressing metrological problems for very small and very large parts, Proc. IDW Workshop, 2001.

J. [. Sheth and . Uicker, A Generalized Symbolic Notation for Mechanisms, Journal of Engineering for Industry, vol.93, issue.1, pp.102-112, 1971.
DOI : 10.1115/1.3427855

. [. Sheldon, Six-axis metrology sensor device" United States Patent US5870834, 1999.

[. Dearborn, Volumetric Error Compensation with Sinumerik 840D" 5 th Aerospace Automation Consortium, SME, 2005.

. [. Slocum, Precision machine design, 1992.

A. [. Stone, C. P. Sanderson, and . Neuman, Arm signature identificationA prototype arm signature identification system, IEEE International Conference on Robotics and Automation IEEE International Conference on Robotics and Automation, pp.41-48, 1986.
DOI : 10.1109/robot.1987.1087835

C. [. Veitschegger and . Wu, Error Robot accuracy analysis based on kinematics n°3, IEEE Journal of Robotics and Automation, issue.2, pp.171-179, 1986.

. [. Visher, Improve the accuracy of parallel robot

P. [. Weck, R. Mckeown, and . Bonse, Reduction and Compensation of Thermal Errors in Machine Tools, CIRP Annals - Manufacturing Technology, vol.44, issue.2, pp.589-598, 1995.
DOI : 10.1016/S0007-8506(07)60506-X

H. [. Wendt, F. Schwenke, M. Wäldele, and K. Krawczyk, Error mapping of large CMMs by sequential multi-lateration using a laser tracker, Proc EUSPEN, 2001.

C. [. Whitney, J. M. Lozinski, and . Rourke, Industrial Robot Forward Calibration Method and Results, Journal of Dynamic Systems, Measurement, and Control, vol.108, issue.1, pp.1-8, 1986.
DOI : 10.1115/1.3143737

Z. [. Yongbing, L. Guoxiong, and . Zhen, An improved cat's-eye retroreflector used in a laser tracking interferometer system, Measurement Science and Technology, vol.14, pp.6-36, 2003.

Y. [. Zhang and . Zang, A Method for Machine Geometry Calibration Using 1-D Ball Array, CIRP Annals - Manufacturing Technology, vol.40, issue.1, pp.1-519, 1991.
DOI : 10.1016/S0007-8506(07)62044-7

C. [. Ziegert and . Mize, The laser ball bar: a new instrument for machine tool metrology, Precision Engineering, vol.16, issue.4, pp.259-267, 1994.
DOI : 10.1016/0141-6359(94)90002-7