A. O. Van, C. Dolan, S. Riskalla, and N. A. , Effect of longitudinal carbon fiber reinforced plastic laminates on shear capacity of RC beams, Proceeding of 4 th International Symposium on FRP reinforcement for RC structures, pp.933-943, 1999.

A. T. Tokyay-m, Assessing the ITZ microcracking via scanning electron microscope and its effect on the failure behaviour of concrete, Cement and Concrete Research, vol.35, issue.2, pp.358-363, 2005.

A. C. , C. J. , K. E. O-', and R. P. , TR55: Design guidance for strengthening concrete structure using fibre composite materials: a review, Engineering Structures, vol.24, pp.889-900, 2002.

A. A. El-refaie-s and G. S. , Flexural strengthening of RC continuous beams using CFRP laminates, Cement and Concrete Research, vol.26, pp.765-776, 2004.

A. S. Robins-p and . Pan-y, Shear bond Testing of concrete repairs, Cement and Concrete Research, vol.29, pp.1067-1076, 1999.

A. S. Et and . Al, Caractérisation expérimentale et modélisation de la fissuration dans une poutre en béton armé réparée par matériaux composite, Compte rendu des 13 ème journées nationales sur les composites, pp.193-204, 2003.

B. R. Mettem-c, H. K. , and A. M. , Bonded-in rod connections of timber structures ? development of design methods and test observations, International Journal of Adhesion & Adhesives, vol.22, pp.47-59, 2002.

B. C. Uppuluri-v and N. A. Boothby-t, Analysis of bonding mechanisms of smooth and lugged FRP rods embedded in concrete, Composites Science and Technology, vol.58, pp.1307-1319, 1998.

B. L. Basheer-p and L. A. And, Influence of coarse aggregate on the permeation, durability and the microstructure characteristics of ordinary Portland cement concrete, Construction and Building Materials, vol.19, issue.9, pp.682-690, 2005.
DOI : 10.1016/j.conbuildmat.2005.02.022

. Bd_01, . Highway, and . Bd, Level 4 and 5 Methods of Assessment for Bridges, BER_02] UNIVERSITY OF CALIFORNIA BERKELEY, Non-destructive Techniques, 2001.

B. M. Majerus-p and . Herzog-r, Numerical simulation of segmentation cracking in thermal barrier coatings by means of cohesive zone elements, Materials Science and Engineering A, vol.412, pp.241-251, 2005.

B. Ch and . Liu, Experimental study on AE characteristics of three-point-bending concrete beam, Cement and Concrete Research, vol.34, pp.391-397, 2004.

B. D. Abraham-o, Méthodologie d'évaluation non destructive de l'état d'altération des ouvrages en béton. Association Française de Génie Civil, Presse de l'Ecole Nationale des Ponts et Chaussées. 1 er Edition, p.556

B. J. Hutchinson-a, Adhesive systems for structural connections in timber, International Journal of Adhesion & Adhesives, vol.22, pp.47-59, 2002.

B. C. Bourgund-u, A fast and efficient response surface approach for structural reliability problems. Structural Safety, pp.57-66, 1990.

B. O. Gunes-o, Progress on understanding debonding problems in reinforced concrete and steel members strengthened using FRP composites, Construction and Building Materials, vol.18, pp.9-19, 2004.

C. P. Véleva-l and . Balancan-m, Corrosion of reinforced concrete in a tropical marine environment and in accelerated tests, Construction and Building Materials, vol.11, issue.2, pp.75-81, 1997.

C. Des and C. Techniques, Pathologie et réparation des ouvrages en béton de stockage et de transport des liquides, 1996.

C. M. Thomson-jr and . Farschman-c, Durability of concrete beams externally reinforced with composite fabrics, Construction and Building Materials, vol.9, issue.3, pp.141-148, 1995.

C. P. Bassetti-a and . Nussbaumer-a, Delamination effects on cracked steel members reinforced by prestressed composite patch. Science Direct, Theoretical and applied fracture mechanics, pp.36-71, 2003.

C. E. Manfredi-g, Behaviour and modelling of bond of FRP rebars to concrete, J Composite Construction, vol.1, issue.2, pp.40-51, 1997.

D. Lorenzis, L. Scialpi-v, and . La, Analytical and experimental study on bonded-in CFRP bars in glulam timber, Composites Part B: Engineering, vol.36, issue.4, pp.279-289, 2005.
DOI : 10.1016/j.compositesb.2004.11.005

D. Lorenzis, L. Rizzo-a, and . La, A modified pull-out test for bond of near-surface mounted FRP rods in concrete, Composites Part B: Engineering, vol.33, issue.8, pp.589-603, 2002.
DOI : 10.1016/S1359-8368(02)00052-5

D. Lorenzis, L. , and N. A. , Bond of near-surface mounted FRP rods to concrete, ACI Structural Journal, vol.2, pp.123-132, 2002.

D. O. Et and M. H. , Structural reliability methods, J. Wiley & Sons, pp.384-384, 1996.

D. F. Pinglot-m and . Lorrain-m, Incidence des incertitudes sur la fiabilité des poteauxs, Struct Engin Intern

E. Ghobarah-a, Seismic rehabilitation of beam-column joint using GFRP sheets, Engineering Structures, pp.1397-1407, 2002.

E. H. Al-khaiat, Effect of sea water on epoxy-repaired concrete, Cement and Concrete Composites, pp.41-52, 1998.

E. E. Beeby-a, Experimental programme and analytical study of bond stress distributions on a composite plate bonded to a reinforced concrete beam. Cement and Concrete Composites, pp.281-291, 2000.

F. E. Ebecken-n, P. C. , and U. , Détermination of probabilistic parameters of concrete : solving the inverse problem by using artificial neural networks, Computers and Structures, vol.78, pp.497-503, 2000.

F. E. Guedes, Q. M. , and U. , An inverse problem analysis for the détermination of probalibistic parameters of concrete behavior modeled by a statistical approach, Mater Struct, vol.32, issue.215, pp.9-13, 1999.

F. P. Kelly-o, Ultimate response of RC beams strengthened with CFRP plates, Journal of composite for construction ASCE, pp.122-127, 2001.

. [. Castro-p, Application of NDT to Concrete Strength Estimation [en ligne] Brasil: UFSM, NDTISS'99, Disponible sur, 2000.

F. B. Neumann-h, Quadratic limit states in structural reliability, Journal of Engineering Mechanic ASCE, vol.105, pp.66-76, 1979.

G. B. Kim-j-k and . Leung-ch, Effect of rubber modifier on interlaminar fracture toughness of CFRP-concrete interface, Composite Science and technology, vol.63, pp.883-892, 2003.

G. H. Hollaway-l, An experimental study of the failure modes of reinforced concrete beams strengthened with prestressed carbon composite plates, Composites Part B, vol.29, pp.411-424, 1998.

L. Midi, Dedolomitization in different alkaline media: Application to Portland cement paste, Cement and Concrete Research, vol.33, issue.9, pp.1443-1448, 2003.

G. Cuevas and O. Robles-f, Aspectos fundamentals del concreto reforzado, pp.757-968, 2002.

G. C. and L. J. Weck-a, Toughness of fiber-reinforced titanium as a function of temperature: experimental results and micromechanical modelling, Acta Materialia, vol.52, issue.13, pp.3929-3939, 2004.

G. C. Reinhardt-h, Localization and classification of fracture types in concrete with quantitative acoustic emission measurement techniques, pp.223-230, 1997.

G. P. , E. S. Beaudoin-j, and . Arsenault-b, Corrosion Resistance of Stainless Steel in Chloride Contaminated Concrete, Cement and Concrete Research, vol.26, issue.8, pp.1151-1156, 1996.

H. P. Ferrier-e and . Lagarde-p, Concrete beams reinforced by fibre-reinforced plastics: the effect of temperature on the adhesive layer, Composites Science and Technology, vol.61, issue.3, pp.425-431, 2001.
DOI : 10.1016/S0266-3538(00)00129-9

. [. Lind-n, An exact and invariant first-order reliability format, Journal of Engineering Mechanics, ASCE, vol.100, pp.111-121, 1974.

H. L. Leeming-m, Strengthening of reinforced concrete structures ? using externally ? bonded FRP composites in structural and civil engineering, 2001.

J. J. Vyncke, Pathologie du Béton Comment y Faire face ?. CSTC-Magazine, Belgium, pp.37-45, 1993.

J. Shannag-m, High-performance cementitious grouts for structural repair, Cement and Concrete Research, pp.803-808, 2002.

K. T. Li-v, The effect of surface preparation on the fracture behaviour of ECC/concrete repair system. Cement & Concrete composite, pp.423-431, 2000.

N. [. De-lorenzis-l, FRP composites for shear strengthening of RC Beams, Proc. 3 er International Conference on Advanced Composite Materials in Bridges and Structures, pp.137-144, 2000.

K. B. Jason, Using acoustic emission to quantify damage in restrained fiber-reinforced cement mortars, Cement and Concrete Research, vol.33, pp.207-214, 2003.

K. O. Fronlund-t and . Poulsen-e, Rebar corrosion rate measurements for service life estimates. ACI Fall Convention, Toronto: Canada Committee 365 Disponible sur, 2000.

K. R. Et and . Usa, Analysis of composite reinforced concrete beams, Disponible sur, 2004.

L. K. Zhou-l and Y. L. Diao-m, Strengthening and strain sensing techniques in rectangular concrete beam using fibreglass composites and fibre Bragg grating sensors, 12th International Conference on Composite Materials (ICCM-12, pp.5-9, 1999.

L. M. Reliability, Reliability engineering & system safety, LER_03] LERM. Moyens:Equipements Investigations et mesures sur site Disponible sur, pp.163-170, 1997.

L. G. Ghebreyesus-a, Fast repair of damaged RC beams using UV curing FRP composites. Composites Structures, pp.105-110, 2006.

L. G. , H. S. Pang-s-s, and W. , Repair of damaged RC columns using fast curing FRP composites, Composites: Part B, vol.34, pp.261-271, 2003.

L. A. Diagana-ch, CRFP contribution to shear capacity of strengthened RC beams, Engineering Structures 23, pp.1212-1220, 2001.

L. and E. Polytechnique, Non-destructive evaluation of damage behaviour of concrete structure, 91128.

L. J. Fibres-de-carbone, Techniques de l'ingénieur, traité Matériaux non métalliques, pp.1-16, 1994.

M. H. , K. S. Et, and L. N. , Methods of structural safety Englewood Cliffs, pp.416-0486445976, 1986.

M. M. Karihaloo-b and . J. Alaee-f, Seismic performance parameters of RC beams retrofitted by CARDIFRC, Engineering Structure, vol.26, pp.2069-2079, 2004.

M. N. Pye-g and . R. Arnott-m, Réparation du béton: Préparation de la surface, Solution constructive No24 [en ligne]. Canada : Institut de recherche en construction, Disponible sur, 1998.

M. Cl and L. J. Cl, Utilisation des techniques de fiabilité en mécanique Technique et documentation, P.I.C. Perfectionnement Industriel des étriers S, A, pp.457-459, 1974.

M. Texier-a, Les Altérations Visibles du Béton In : Diagnostic des Ouvrages en Béton Armé Etat ? Méthodes -Prévisions du Vieillissement, Journées d'étude de la Commission Construction Bâtiment du Centre Français de l'anticorrosion, pp.27-34, 1998.

M. P. , C. F. ?íma-v, and . Brinck-a, Microstructure processes induced by phase transitions in a Cu Au alloy as studied by acoustic emission and optical cinematography, Acta Maternaliser, vol.47, issue.2, pp.427-434, 1999.

M. H. Liang-j, Using acoustic emission in fatigue and fracture materials research [en ligne] Disponible sur: http://www.tms.org/pubs, JOM, vol.50, issue.119811, 1998.

M. De and A. , Probabilistic analysis of reinforced concrete columns Advances in Engineering Software, pp.871-879, 2001.

M. A. Philip-s, Comparison of acoustic emission activity in steel-reinforced and FRP-reinforced concrete beams, Construction and Building Materials, vol.14, pp.299-310, 2000.

M. Ali, M. S. Oehlers-d, and B. M. , Debonding of steel plates adhesively bonded to the compression faces of RC beams, Construction and building Materials, pp.413-422, 2005.

M. Ali, M. S. Oehlers-d, and B. M. , Shear Peeling of Steel Plates Bonded to Tension Faces of RC Beams, Journal of Structural Engineering, vol.127, issue.12, pp.1453-1460, 2001.
DOI : 10.1061/(ASCE)0733-9445(2001)127:12(1453)

M. A. Lemaire-m and M. J. , Finite element and reliability: a method for compound variables-application on a cracked heating system. Nuclear engineering and design, pp.2-3185, 1998.

M. P. Swamy-n, Interface shear stress : a new design criterion for plate debonding, Journal of composites for construction ASCE, vol.5, issue.1, pp.35-43, 2001.

A. Française and D. Normalisation, Essai pour béton durci, Norme Européenne ? Norme Française NF EN 12390-2, Partie 2: Confection et conservation des éprouvettes, 2001.

A. Française and D. Normalisation, Essai pour béton durci, Norme Européenne ? Norme Française NF EN 12390-5, Octobre 2001, Partie 5: Résistance en flexion sur éprouvettes

A. Française and D. Normalisation, Moules pour éprouvettes cylindrique et prismatique, pp.33-35, 1981.

O. D. Moran-j, Premature failure of externally plated reinforced concrete beams, ASCE J Struct Eng, vol.4, issue.116, pp.978-995, 1995.

O. K. Shinoda-t, Strength in concrete reinforced with recycled CFRP pieces, Composites Part A: Applied Science and Manufacturing, vol.36, issue.7, pp.893-902, 2005.

O. M. Watanabe-h, Quantitative damage estimation of concrete by acoustic emission, Japan, Construction and Building Materials, vol.12, pp.217-224, 2001.

O. M. Shigeishi-m, Three-Dimensional Visualization of Moment Tensor Analysis by SiGMA-AE [en ligne], Disponible sur, 2002.

O. M. Shigeishi-m and I. H. , Détermination of crack location, type and orientation in concrete structures by acoustic emission, Mag Conc Res, vol.155, pp.127-134, 1991.

P. R. , R. A. De, and D. A. Lopez-c, Adherence analysis of fiber-reinforced polymer strengthened RC beams, Computers and Structures, vol.82, pp.1865-1873, 2004.

P. R. Hamelin-p, Ouvrage d'art utilisant des matériaux composites. IREX, mai 1996, pp.8-32

P. A. Massicotte-b and . Boucher-e, Strengthening of reinforced concrete beams with composite materials: theoretical study, Composite Structure, vol.33, pp.63-75, 1995.

Q. R. Hollaway-l and . M. Throne-a, Experimental and analytical investigation of FRP strengthened beam response: part I. Magazine of Concrete research, pp.48331-342, 1996.

Q. R. Hollaway-l and . M. Throne-a, Experimental and analytical investigation of FRP strengthened beam response: part II. Magazine of Concrete research, pp.48343-351, 1996.

R. M. Hassanen-m, Peeling failure of RC beams with FRP or steel plates glued to their soffits. Proceeding of the institution of Civil Engineers: Struct & Building, pp.291-305, 2000.

R. M. Zhang-s, An insight into the structural behaviour of RC beams with externally bonded plates. Proceeding of the institution of Civil Engineers: Struct & Building, pp.477-492, 1997.

R. J. De-oliveira-r and M. J. Ferreira-a, A NDT assessment of fracture mechanics properties of fiber reinforced polymer concrete, Polymer Testing, vol.22, pp.395-401, 2003.

R. P. Ulm-f-j, Size effects in the biaxial behaviour of concrete: physical mechanisms and modelling, Mater Struct, vol.30, pp.210-216, 0198.

R. P. Ulm-f-j and . Hachi-f, Compressive behaviour of concrete: physical mechanisms and modelling, J Eng Mech ASCE, vol.122, issue.11, pp.1038-1043, 1996.

R. P. Wu-x, . Le-maou-f, and . Belloc-a, Scale effect on concrete in tension, Mater Struct, vol.27, issue.172, pp.437-444, 1994.

R. P. Richer-s, Numerical modelling of concrete cracking based on a stochastic approach, Mater Struct, vol.20, issue.119, pp.334-337, 1987.

S. H. Malek-am, Design guidelines for flexural strengthening of RC beams with FRP plates, Journal of composites for construction ASCE, vol.2, issue.4, pp.158-164, 1998.

S. M. , M. J. Nunez-e, and . Fiore-j, Estudio y caracterización de la emisión acústica en el hormigón [en ligne]

S. V. Roberts-m, Reliability analysis of deteriorating structures-the experience and needs of practising engineers. Structural Safety, pp.357-372, 1999.

S. Dgzfp, G. Ndt-ce-symposium, and . Berlin, A Concluding Review ? Page 4, Disponible sur, 1995.

S. F. Schechinger-b, Numerical Modelling of Acoustic Emission Sources and Wave Propagation in Concrete [en ligne]. NDT.net, Disponible sur, 2002.

J. Cruz-diaz, A. Sellier, B. Capra, P. Delmotte, and A. Mebarki, Fiabilit?? des murs de contreventement en ma??onnerie. Calibration des coefficients partiels d'un mod??le simplifi??, Revue fran??aise de g??nie civil, vol.6, issue.3, pp.447-456, 2002.
DOI : 10.3166/rfgc.6.447-456

S. Italia, Injection et encollages [en ligne]. Italia. Disponible sur

[. Serrano and E. , Glued-in rods for timber structures ??? a 3D model and finite element parameter studies, International Journal of Adhesion and Adhesives, vol.21, issue.2, pp.115-127, 2001.
DOI : 10.1016/S0143-7496(00)00043-9

S. Gestion, surveillance, entretien et réparation [en ligne]. France. Disponible sur :http://www.setra.fr/euronormes/Francais/Telechargements/textoOA, 2003.

S. M. , A. M. Beitelman-t, and . Sowrirajan-r, Reinforced concrete rectangular beams strengthened with CFRP laminates, Composites : Part B, vol.27, pp.225-233, 1996.

S. A. Al-sulaimani-g, . A. Basunbul-i, and . N. Ghaleb-b, Strengthening of initially loaded reinforced concrete beams using FRP plates. ACI structural journal, pp.160-168, 1994.

S. S. France, Notice technique sikadur 330 [en ligne] Disponible sur, 2006.

S. J. Gardelle-v, Duration of load effect of glued-in rods in full sized old oak beams ? LICONS Project, LRBB Contribution

T. G. Vie-d, Facteurs de vieillissement et diagnostic des ouvrages en béton armé Diagnostic des Ouvrages en Béton Armé Etat ? Méthodes -Prévisions du Vieillissement. Journées d'étude de la Commission Construction Bâtiment du Centre Français de l'anticorrosion, pp.140-150, 1998.

T. H. Deng-y, Deflexion and crack-width prediction of concrete beams reinforced with glass FRP rods, Construction and Building Materials, vol.19, pp.351-358, 2003.

T. H. Gomez-w, Durability characteristics of concrete beams externally bonded with FRP composite sheets. Cement and Concrete Composite, pp.69-74, 1997.

T. G. Serra-p and N. A. Belarbi-a, Concrete cover delamination in reinforced concrete beams strengthened with carbon fiber reinforced polymer sheets, Proceedings of the 4 th International Symposium on Fiber Reinforced Polymer Reinforcement for Reinforced Concrete Structure. Maryland (USA), pp.725-735, 1999.

V. H. Hamelin-p, Strengthening of concrete beams using fiber-reinforced plastic, Materials and Structures, vol.30, pp.160-166, 1997.

W. Wu-b-sh and . Wang-q-, Online SEM investigation of microcrack characteristics of concretes at various temperatures, Cement and Concrete Research, vol.35, issue.7, pp.1385-1390, 2005.

W. K. and C. B. Yao-w, Study on the AE characteristics of fracture process of mortar, concrete and steel-fiberreinforced concrete beam, Cement and Concrete Research, vol.30, pp.1495-1500, 2000.

Y. X. Miller-b and N. A. Bakis-c, Characterisation of CFRP bars used as near-surface mounted reinforcement. Proceeding of the 8 th International Structural Faults and Repair Conference, CD-ROM version, p.10, 1999.

Y. J. Wu-z, Micro-mechanical analysis of splitting failure in concrete reinforced with fiber reinforced plastic rods. Cement & Conc Composite, pp.243-251, 2000.

Y. K. Kikuchi-k, K. M. , N. H. , C. T. , K. S. et al., Experimental study on effects of reinforcing details on seismic performance of masonry walls, Proc. of 26 th Conference on Our World in Concrete & StructureCD-ROM), 2001.

Y. K. Kikuchi-k, K. M. , N. H. , C. T. , K. S. et al., Experimental study for higher seismic performance of masonry walls in developing countries, Proc. of 25 th Conference on Our World in Concrete & Structure, pp.695-702, 2000.

Y. K. Liu-l and C. T. Ma-l, Seismic strengthening for low-rise bamboo-and masonry-wall residential building in Colombia, Faculty of Engineering Research Report, pp.4025-4057, 1999.

Y. S. , L. , Y. M. Tomokiyo-t, and . Uomoto-t, Evaluation of fatigue damage in reinforced concrete slab by acoustic emission, Japan, NDT&E International, vol.34, pp.381-387, 2001.

Z. Y. Ono-t, Moment methods for structural reliability, Structural Safety, vol.23, issue.1, pp.47-75, 2001.

Z. Y. Baluch-m, . A. Basunbul-i, . M. Sharif-a, . M. Azad-a, and . J. Al-sulaimani-g, Guidelines towards the design of RC beams with external plates, ACI Structural Journal, vol.91, issue.6, pp.639-646, 1994.