A. Albrecht, J. Chauvin, F. Lafossas, S. Potteau, and G. Corde, Development of highly premixed combustion diesel engine model : From simulation to control design, Proc. of the SAE Conference, 1072.

A. Albrecht, J. Chauvin, S. Potteau, and G. Corde, Design of real-time torque balancing control for highly premixed combustion engine using a 1d Diesel engine model, Proc. of the IAV Conference "Engine process simulation and supercharging, 2005.

J. Chauvin, G. Corde, P. Moulin, M. Castagné, N. Petit et al., Observer Design for Torque Balancing on a DI Engine, SAE Technical Paper Series, 2004.
DOI : 10.4271/2004-01-1370

J. Chauvin, G. Corde, and N. Petit, Constrained motion planning for the airpath of a Diesel HCCI engine, Proceedings of the 45th IEEE Conference on Decision and Control, 2006.
DOI : 10.1109/CDC.2006.376917
URL : https://hal.archives-ouvertes.fr/hal-00473244

J. Chauvin, G. Corde, N. Petit, and P. Rouchon, Experimental motion planning in airpath control for HCCI engine, 2006 American Control Conference, 2006.
DOI : 10.1109/ACC.2006.1656493
URL : https://hal.archives-ouvertes.fr/hal-00473234

J. Chauvin, G. Corde, C. Vigild, N. Petit, and P. Rouchon, Air Path Estimation on Diesel HCCI Engine, SAE Technical Paper Series, 2006.
DOI : 10.4271/2006-01-1085

J. Chauvin, P. Moulin, G. Corde, N. Petit, and P. Rouchon, High frequency realtime individual cylinder Air Fuel Ratio observer on a Diesel engine, Control Engineering Practice, 2005.

P. Moulin, G. Corde, J. Chauvin, and M. Castagné, Cylinder Individual AFR Estimation based on a Physical Model and using Kalman Filters, SAE Technical Paper Series, 2004.
DOI : 10.4271/2004-01-0422

O. Nilsson, A. Rantzer, and J. Chauvin, A model reduction case study: Automotive engine air path, Proc. of the Conference on Control Applications, 2006.

J. Chauvin, Y. Bentolila, and O. Grondin, Méthode d?estimation en temps réel de paramètres de combustion moteur à partir de signaux vibratoires, 2006.

J. Chauvin, G. Corde, N. Petit, and P. Rouchon, Méthode d'estimation du régime instantané produit par chacun des cylindres d'un moteur à combustion interne, 2005.

J. Chauvin, P. Moulin, G. Corde, N. Petit, and P. Rouchon, Méthode d'estimation par un filtre de kalman étendu de la richesse dans un cylindre d'un moteur à combustion, 2006.

A. Albrecht, J. Chauvin, F. Lafossas, S. Potteau, and G. Corde, Méthode d'estimation par un filtre non-linéaire adaptatif de la richesse dans un cylindre d'un moteur à combustion European Patent Development of highly premixed combustion diesel engine model : From simulation to control design, Proc. of the SAE Conference, 1072.

M. Ammann, N. Fekete, L. Guzzella, and A. Glattfelder, Model-Based Control of the VGT and EGR in a Turbocharged Common-Rail Diesel Engine: Theory and Passenger Car Implementation, SAE Technical Paper Series, pp.2003-2004, 2003.
DOI : 10.4271/2003-01-0357

P. Amnéus, D. Nilsson, F. Mauss, M. Christensen, and B. Johansson, Homogeneous Charge Compression Ignition engine: experiments and detailed kinetic calculations, th International Symposium on Diagnostic and Modeling in Internal Combustion Engines, 1998.

B. Anderson and J. Moore, Linear optimal control, 1971.

I. Arsie, F. D. Genova, C. Pianese, M. Sorrentino, G. Rizzo et al., Development and Identification of Phenomenological Models for Combustion and Emissions of Common-Rail Multi-Jet Diesel Engines, SAE Technical Paper Series, 1877.
DOI : 10.4271/2004-01-1877

J. Aubin, Applied Functional Analysis, 2000.
DOI : 10.1002/9781118032725

T. Auckenthaler, C. Onder, and H. Geering, Aspects of dynamic three-way catalyst behaviour including oxygen storage, IFAC Symp. Advances in Automotive Control (AAC04), 2004.

J. Ball, J. Bowe, C. Stone, and P. Mcfadden, Torque Estimation and Misfire Detection using Block Angular Acceleration, SAE Technical Paper Series, 2000.
DOI : 10.4271/2000-01-0560

C. Barba, C. Burkhardt, K. Boulouchos, and B. M. , A phenomenological combustion model for heat release rate prediction in high-speed DI Diesel engines with commonrail injection, Proc. of the SAE Conference, 2000.

J. Bengtsson, P. Strandh, R. Johansson, P. Tunestål, and B. Johansson, Hybrid control of homogeneous charge compression ignition (HCCI) engine dynamics, IEEE Proc. of 2004 American Control Conference, 2004.
DOI : 10.1016/0005-1098(94)90229-1

P. Berggren and A. Perkovic, Cylinder individual lambda feedback control in an SI engine, 1996.

S. Bittanti, Time Series and Linear Systems, 1986.
DOI : 10.1007/BFb0043798

S. Bittanti, P. Colaneri, and G. Nicolao, The difference periodic Riccati equation for the periodic prediction problem, Proc. of the IEEE Transactions on Automatic Control, 1988.

F. Brauer and J. Nohel, The Qualitative Theory of Ordinary Differential Equations: An Introduction, 1989.

P. Carlucci, A. Ficarella, and D. Laforgia, Effects of Pilot Injection Parameters on Combustion for Common Rail Diesel Engines, SAE Technical Paper Series, 2003.
DOI : 10.4271/2003-01-0700

C. Carnevale and M. Hadji, Cylinder To Cylinder AFR Control With An Asymmetrical Exhaust Manifold in a GDI System, SAE Technical Paper Series, p.981064, 1998.
DOI : 10.4271/981064

J. Chauvin, Y. Bentolila, and O. Grondin, Méthode d?estimation en temps réel de paramètres de combustion moteur à partir de signaux vibratoires, 2006.

J. Chauvin, G. Corde, P. Moulin, M. Castagné, N. Petit et al., Observer Design for Torque Balancing on a DI Engine, SAE Technical Paper Series, 2004.
DOI : 10.4271/2004-01-1370

J. Chauvin, G. Corde, N. Petit, and P. Rouchon, Méthode d'estimation du régime instantané produit par chacun des cylindres d'un moteur à combustion interne, 2005.

J. Chauvin, G. Corde, C. Vigild, N. Petit, and P. Rouchon, Air Path Estimation on Diesel HCCI Engine, SAE Technical Paper Series, 2006.
DOI : 10.4271/2006-01-1085

J. Chauvin, P. Moulin, G. Corde, N. Petit, and P. Rouchon, High frequency real-time individual cylinder Air Fuel Ratio observer on a Diesel engine, Control Engineering Practice, 2005.

A. Chevalier, C. Vigild, and E. Hendricks, Predicting the Port Air Mass Flow of SI Engines in Air/Fuel Ratio Control Applications, SAE Technical Paper Series, 2000.
DOI : 10.4271/2000-01-0260

C. Chiang and A. Stefanopoulou, Steady-state multiplicity and stability of thermal equilibria in homogeneous charge compression ignition (HCCI) engines, 2004 43rd IEEE Conference on Decision and Control (CDC) (IEEE Cat. No.04CH37601), 2004.
DOI : 10.1109/CDC.2004.1430285

F. Chmela, M. Engelmayer, G. Pirker, and A. Wimmer, Prediction of turbulence controlled combustion in Diesel engines, Thiesel, 2004.

F. Chmela and G. Orthaber, Rate of Heat Release Prediction for Direct Injection Diesel Engines Based on Purely Mixing Controlled Combustion, SAE Technical Paper Series, pp.1999-2000, 1999.
DOI : 10.4271/1999-01-0186

J. Coron, D. Novel, and B. , Stabilization of a rotating body beam without damping, Proc. of the IEEE Transactions on Automatic Control, pp.608-618, 1998.
DOI : 10.1109/9.668828

C. Dafermos and M. Slemrod, Asymptotic behavior of nonlinear contraction semigroups, Journal of Functional Analysis, vol.13, issue.1, pp.437-442, 1973.
DOI : 10.1016/0022-1236(73)90069-4

S. Drakunov, G. Rizzoni, and Y. Wang, Estimation of engine torque using nonlinear observers in the crank angle domain, Proc. of the 5 th ASME symposium on Advanced Automotive Technologies, 1995.

M. Durnholz, H. Endres, and P. Frisse, Preinjection A Measure to Optimize the Emission Behavior of DI-Diesel Engine, SAE Technical Paper Series, 1994.
DOI : 10.4271/940674

J. Fantini and J. Burq, Exhaust - Intake Manifold Model for Estimation of Individual Cylinder Air Fuel Ratio and Diagnostic of Sensor - Injector, SAE Technical Paper Series, 1059.
DOI : 10.4271/2003-01-1059

M. Fliess, J. Lévine, P. Martin, and P. Rouchon, Flatness and defect of non-linear systems: introductory theory and examples, International Journal of Control, vol.4, issue.6, pp.1327-1361, 1995.
DOI : 10.1109/9.73561

J. Grizzle, K. Dobbins, and J. Cook, Individual cylinder air-fuel ratio control with a single EGO sensor, Proc. of the IEEE Transactions on Vehicular Technology, pp.357-381, 1991.
DOI : 10.1109/25.69998

J. Guckenheimer and P. Holmes, Nonlinear Oscillations, Dynamical Systems and Bifurcation of Vector Fields, 1983.

Y. Guezennec and P. Gyan, A novel approach to real-time estimation of the individual cylinder pressure for SI engine control, Proc. of the SAE Conference, 1999.

P. Gyan, S. Ginoux, J. Champoussin, and Y. Guezennec, Crankangle Based Torque Estimation: Mechanistic / Stochastic, SAE Technical Paper Series, 2000.
DOI : 10.4271/2000-01-0559

P. Hartman, Ordinary Differential Equations, Second Edition, Birkhäuser Boston, 1982.

E. Hendricks, A. Chevalier, M. Jensen, S. Sorenson, D. Trumpy et al., Modelling of the Intake Manifold Filling Dynamics, SAE Technical Paper Series, 1996.
DOI : 10.4271/960037

J. Heywood, Internal Combustion Engine Fundamentals, 1988.

L. Hsu, R. Ortega, and G. Damn, A globally convergent frequency estimator, Proc. of the IEEE Transactions on Automatic Control, pp.698-713, 1999.

A. Hultqvist, U. Engdar, B. Johansson, and J. Klingmann, Reacting Boundary Layers in a Homogeneous Charge Compression Ignition (HCCI) Engine, SAE Technical Paper Series, 1032.
DOI : 10.4271/2001-01-1032

J. Hwang, J. Park, M. Kim, and J. Chae, Multizone model for DI Diesel engine combustion and emissions, Proc. of the SAE Conference, 1999.

M. Ikeda, H. Maeda, and S. Kodama, Stabilization of Linear Systems, SIAM Journal on Control, vol.10, issue.4, pp.304-326, 1975.
DOI : 10.1137/0310052

T. Jaine, A. Benkenida, P. Menegazzi, and P. Higelin, Zero dimensional computation of Diesel spray -comparison with experiments and 3D model, Proc. of the SAE- NA congress, pp.2003-2004, 2003.

M. Jankovi´cjankovi´c and I. Kolmanovsky, Robust nonlinear controller for turbocharged Diesel engine, Proc. of the American Control Conference, 1998.

H. Javid, Observing the slow states of a singularly perturbed system, IEEE Transactions on Automatic Control, vol.25, issue.2, pp.277-280, 1980.
DOI : 10.1109/TAC.1980.1102290

J. Jensen, A. Kristensen, S. Sorensen, N. Houbak, and E. Hendricks, Mean Value Modeling of a Small Turbocharged Diesel Engine, SAE Technical Paper Series, p.910070, 1991.
DOI : 10.4271/910070

M. Jung and K. Glover, Control-oriented linear parameter-varying modelling of a turbocharged diesel engine, Proceedings of 2003 IEEE Conference on Control Applications, 2003. CCA 2003., 2003.
DOI : 10.1109/CCA.2003.1223282

J. Kahrstedt, K. Behnk, A. Sommer, and T. Wormbs, Combustion processes to meet future emission standards, Motortechnische Zeitschrift, pp.1417-1423, 2003.

M. Kao and J. Moskwa, Turbocharged Diesel Engine Modeling for Nonlinear Engine Control and State Estimation, Journal of Dynamic Systems, Measurement, and Control, vol.117, issue.1, 1995.
DOI : 10.1115/1.2798519

D. Karnopp, D. Margolis, and R. Rosenberg, System Dynamics: A Unified Approach, IEEE Transactions on Systems, Man, and Cybernetics, vol.6, issue.10, 1990.
DOI : 10.1109/TSMC.1976.4309434

U. Kiencke and L. Nielsen, Automotive Control Systems For Engine, Driveline, and Vehicle, SAE Internationnal, 2000.

I. Kolmanovsky, A. Stefanopoulou, P. Moraal, and M. Van-nieuwstadt, Issues in modelling and control of intake flow in variable geometry turbocharged engines, Proc of the 18 th IFIP Conference on System Modelling and Optimization, 1997.

A. Krener and A. Isidori, Linearization by output injection and nonlinear observers, Systems & Control Letters, vol.3, issue.1, pp.47-52, 1983.
DOI : 10.1016/0167-6911(83)90037-3

A. Krener and W. Respondek, Nonlinear Observers with Linearizable Error Dynamics, SIAM Journal on Control and Optimization, vol.23, issue.2, pp.197-216, 1985.
DOI : 10.1137/0323016

T. Kreuzer, E. Lox, D. Lindner, and L. J. , Advanced exhaust gas aftertreatment systems for gasoline and diesel fuelled vehicles, Catalysis Today, vol.29, issue.1-4, pp.17-27, 1996.
DOI : 10.1016/0920-5861(95)00254-5

X. Lü, W. Chen, and Z. Huang, A fundamental study on the control of the HCCI combustion and emissions by fuel design concept combined with controllable EGR. Part 1. The basic characteristics of HCCI combustion, Fuel, vol.84, issue.9, pp.1074-1083, 2005.
DOI : 10.1016/j.fuel.2004.12.014

N. Ladommatos, S. Abdelhalim, H. Zhao, and Z. Hu, The Dilution, Chemical, and Thermal Effects of Exhaust Gas Recirculation on Diesel Engine Emissions - Part 1: Effect of Reducing Inlet Charge Oxygen, SAE Technical Paper Series, p.961165, 1996.
DOI : 10.4271/961165

W. Lohmiller and J. Slotine, On Contraction Analysis for Non-linear Systems, Automatica, vol.34, issue.6, pp.683-696, 1998.
DOI : 10.1016/S0005-1098(98)00019-3

Z. Luo, B. Guo, and O. Morgül, Stability and stabilization of infinite dimensional systems with applications, 1999.
DOI : 10.1007/978-1-4471-0419-3

R. Marino and P. Tomei, Global estimation of n unknown frequencies, Proc. of the 39th IEEE Conf. Decision and Control, 2000.

M. B. Milam, Real-time optimal trajectory generation for constrained systems, 2003.

P. Moraal and I. Kolmanovsky, Turbocharger Modeling for Automotive Control Applications, SAE Technical Paper Series, 1999.
DOI : 10.4271/1999-01-0908

P. Moraal, Y. Yacoub, U. Christen, B. Carberry, and G. S. , Diesel particulate filter regeneration: control or calibration, IFAC Symp. Advances in Automotive Control (AAC04), 2004.

P. Moulin, G. Corde, J. Chauvin, and M. Castagné, Cylinder Individual AFR Estimation based on a Physical Model and using Kalman Filters, SAE Technical Paper Series, 2004.
DOI : 10.4271/2004-01-0422

O. Nilsson, A. Rantzer, and J. Chauvin, A model reduction case study: Automotive engine air path, Proc. of the Conference on Control Applications, 2006.

D. Pierpont, D. Montgomery, and R. Reitz, Reducing particulate and NO x using multiple injections and EGR in a DI Diesel, Proc. of the SAE Conference, 1995.

V. Popov, Hyperstability of automatic control systems, 1973.

B. Reveille, M. Miche, S. Jay, and S. Henriot, Contribution of 3D CFD tools to the development and understanding of Diesel engines, Proc. of the SIA Congress, 2004.

G. Rizzoni, Estimate of indicated torque from crankshaft speed fluctuations: a model for the dynamics of the IC engine, Proc. of the IEEE Transactions on Vehicular Technology, pp.169-179, 1989.
DOI : 10.1109/25.45470

G. Rizzoni and F. Connolly, Estimate of IC engine torque from measurment of crankshaft angular position, Proc. of the SAE Conference, 1993.

G. Rizzoni, Y. Kim, and Y. Wang, Design of an IC engine torque estimator using unknown input observer, ASME Journal of Dynamic Systems, Measurement, and Control, vol.121, 1999.

L. Shi, Y. Cui, K. Deng, H. Peng, and C. Y. , Study of low emission homogeneous charge compression ignition (HCCI) engine using combined internal and external exhaust gas recirculation (EGR), Energy, vol.31, issue.14, pp.1084-1092, 2006.
DOI : 10.1016/j.energy.2005.12.005

K. Song-charng, A. Patel, and R. Reitz, Development and application of detailled chemistry based CFD models for Diesel PCCI engine simulations, Proc. of the SAE Conference, 2004.

K. Srinivasan, G. Rizzoni, V. Trigui, and G. Luh, On-line estimation of net torque from crankshaft angular velocity measurement using repetitive estimations, Proc. of the American Control Conference, 1992.

A. Stefanopoulou, I. Kolmanovsky, and J. Freudenberg, Control of variable geometry turbocharged diesel engines for reduced emissions, IEEE Transactions on Control Systems Technology, vol.8, issue.4, pp.733-745, 2000.
DOI : 10.1109/87.852917

T. C. Tow, D. A. Pierpont, and R. D. Reitz, Measurement of the effect of injection rate and split injections on Diesel engine soot and NO x emissions, Proc. of the SAE Conference, 1994.

S. Tsai and M. Goyal, Dynamic Turbocharged Diesel Engine Model for Control Analysis and Design, SAE Technical Paper Series, 1986.
DOI : 10.4271/860455

M. Van-nieuwstadt, I. Kolmanovsky, P. Moraal, A. Stefanopoulou, and M. Jankovi´cjankovi´c, EGR-VGT control schemes: experimental comparison for a high-speed diesel engine, IEEE Control Systems Magazine, vol.20, issue.3, pp.63-79, 2000.
DOI : 10.1109/37.845039

M. Van-nieuwstadt, P. Moraal, I. Kolmanovsky, A. Stefanopoulou, P. Wood et al., Decentralized and multivariable designs for EGR-VGT control of Diesel engine, Proc of the 2 nd IFAC Workshop on Advances in Automotive Control, 1998.

M. Vidyasagar, Nonlinear systems analysis Upper Saddle River, 1992.

B. Walter and B. Gatellier, Near Zero NOx Emissions and High Fuel Efficiency Diesel Engine: the Naditm Concept Using Dual Mode Combustion, Oil & Gas Science and Technology, vol.58, issue.1, pp.101-114, 2003.
DOI : 10.2516/ogst:2003007

J. Williams, An Overview of Misfiring Cylinder Engine Diagnostic Techniques Based on Crankshaft Angular Velocity Measurements, SAE Technical Paper Series, 1996.
DOI : 10.4271/960039

X. Xia, Global frequency estimation using adaptive identifiers, IEEE Transactions on Automatic Control, vol.47, issue.7, pp.1188-1193, 2002.
DOI : 10.1109/TAC.2002.800670

L. Zhang, A Study of Pilot Injection in a DI Diesel Engine, SAE Technical Paper Series, pp.1999-2000, 1999.
DOI : 10.4271/1999-01-3493