.. Cas-particulier:-souplesse-isotrope-et-souplesse-de-glissement, 220 B.3.1 Principe de détermination des modules effectifs, p.221

.. Sphère-isotrope-entourée-d-'une-interface, 227 C.2.1 Déformation auxiliaire sphérique, p.230

J. Abate and W. Whitt, A Unified Framework for Numerically Inverting Laplace Transforms, INFORMS Journal on Computing, vol.18, issue.4, pp.408-421, 2006.
DOI : 10.1287/ijoc.1050.0137

M. A. Ali and B. Singh, The effect of porosity on the properties of glass fibre-reinforced gypsum plaster, Journal of Materials Science, vol.11, issue.65, pp.1920-1928, 1975.
DOI : 10.1007/BF00754481

E. C. Alsadi, Y. Combe, and . Cheng, Properties of gypsum with the addition of gum arabic and calcium hydroxide, The Journal of Prosthetic Dentistry, vol.76, issue.5, pp.530-534, 1996.
DOI : 10.1016/S0022-3913(96)90013-X

E. Arzt, The influence of an increasing particle coordination on the densification of spherical powders, Acta Metallurgica, vol.30, issue.10, pp.1883-1890, 1982.
DOI : 10.1016/0001-6160(82)90028-1

R. Barbarulo, Comportement des matériaux cimentaires : actions des sulfates et de la température, Thèse de doctorat, p.148, 2002.

J. Barthélémy, Approche micromécanique de la rupture et de la fissuration dans les géomatériaux, Thèse de doctorat, pp.132-172, 2005.

J. Barthélémy and L. Dormieux, D??termination du crit??re de rupture macroscopique d'un milieu poreux par homog??n??isation non lin??aire, Comptes Rendus M??canique, vol.331, issue.4, pp.271-276, 2003.
DOI : 10.1016/S1631-0721(03)00063-9

F. Benboudjema, Modélisation des déformations différées du béton sous sollicitations biaxiales Application aux enceintes de confinement de bâtiments réacteurs des centrales nucléaires, Thèse de doctorat, p.148, 2002.

D. P. Bentz, Three-Dimensional Computer Simulation of Portland Cement Hydration and Microstructure Development, Journal of the American Ceramic Society, vol.80, issue.1, pp.3-21, 1997.
DOI : 10.1111/j.1151-2916.1997.tb02785.x

D. P. Bentz, CEMHYD3D: A three dimensional cement hydration and microstructural development modelling package, NISTIR 6485, U.S. Department of Commerce, p.88, 2000.

O. Bernard, F. Ulm, and E. Lemarchand, A multiscale micromechanics-hydration model for the early-age elastic properties of cement-based materials, Cement and Concrete Research, vol.33, issue.9, pp.1293-1309, 2003.
DOI : 10.1016/S0008-8846(03)00039-5

URL : https://hal.archives-ouvertes.fr/hal-00139284

N. Bilger, M. Bornert, F. Auslender, A. Zaoui, and R. Masson, Surface d'écoulement macroscopique des milieux poreux : modification du critère de Gurson par une approche micromécanique. Dans 15 e congrès français de mécanique, p.202, 2001.

S. Bishnoi and K. Scrivener, Optimised continuum cement hydration modelling, 2nd International RILEM Symposium on Advances in Concrete through Science and Engineering, pp.63-74, 2006.
DOI : 10.1617/2351580028.005

M. Bornert, C. Stolz, and A. Zaoui, Morphologically representative pattern-based bounding in elasticity, Journal of the Mechanics and Physics of Solids, vol.44, issue.3, pp.307-331, 1996.
DOI : 10.1016/0022-5096(95)00083-6

A. Boumiz, D. Sorrentino, C. Vernet, and F. Cohen-tenoudji, Modelling the development of the elastic moduli as a function of the degree of hydration of cement pastes and mortars. In Why does cement set? an interdisciplinary approach, Second Rilem workshop on hydration and setting, pp.90-91, 1997.

J. F. Brotchie and G. Urbach, The flexural behaviour of fibrous plaster sheets, Australian Journal of Applied Science, vol.14, issue.1, pp.69-93, 1962.

B. Budiansky, On the elastic moduli of some heterogeneous materials, Journal of the Mechanics and Physics of Solids, vol.13, issue.4, pp.223-227, 1965.
DOI : 10.1016/0022-5096(65)90011-6

J. Byfors, Plain concrete at early ages. PhD thesis, Swedish cement and concrete institute , Sweden, p.92, 1980.

R. M. Christensen and K. H. Lo, Solutions for effective shear properties in three phase sphere and cylinder models, Journal of the Mechanics and Physics of Solids, vol.27, issue.4, pp.315-330, 1979.
DOI : 10.1016/0022-5096(79)90032-2

A. Colak, Physical and mechanical properties of polymer-plaster composites, Materials Letters, vol.60, issue.16, pp.1977-1982, 2006.
DOI : 10.1016/j.matlet.2005.12.062

G. Constantinides, Invariant mechanical properties of calcium silicate hydrates (C-S-H) in cement-based materials: instrumented nanoindentation and microporomechanical modelling, p.108, 2005.

G. Constantinides and F. Ulm, The effect of two types of C-S-H on the elasticity of cement-based materials: Results from nanoindentation and micromechanical modeling, Cement and Concrete Research, vol.34, issue.1, pp.67-80, 2004.
DOI : 10.1016/S0008-8846(03)00230-8

G. Constantinides and F. Ulm, The nanogranular nature of C???S???H, Journal of the Mechanics and Physics of Solids, vol.55, issue.1, pp.64-90, 2007.
DOI : 10.1016/j.jmps.2006.06.003

A. Courault, Stoechiométrie des C-S-H et propriétés dans différents environnements chimiques. Modélisation expérimentale, Thèse de doctorat, pp.28-148, 2001.

C. Dany, Étude de l'influence de la microstructure sur les propriétés mécaniques du plâtre sec. Mémoire de master, génie physique des matériaux, Insa, p.64, 1995.

D. Jong and J. Bouman, Zeitschrift für kristallographie. 100:275, p.40, 1938.

S. Diamond, The microstructure of cement paste and concrete -a visual primer. Cement and Concrete Composites, pp.919-933, 2004.

L. Dormieux, E. Lemarchand, and J. Sanahuja, Comportement macroscopique des mat??riaux poreux ?? microstructure en feuillets, Comptes Rendus M??canique, vol.334, issue.5, pp.304-310, 2002.
DOI : 10.1016/j.crme.2006.03.008

L. Dormieux, J. Sanahuja, and Y. Maalej, R??sistance d'un polycristal avec interfaces intergranulaires imparfaites, Comptes Rendus M??canique, vol.335, issue.1, pp.25-31, 0199.
DOI : 10.1016/j.crme.2006.11.005

L. Dormieux, J. Sanahuja, and S. Maghous, Influence of capillary effects on strength of non-saturated porous media, Comptes Rendus M??canique, vol.334, issue.1, pp.19-24, 2006.
DOI : 10.1016/j.crme.2005.11.004

G. J. Dvorak and A. Bahei-el-din, Inelastic Composite Materials: Transformation Analysis and Experiments, Continuum micromechanics. Cism Courses and Lectures n, p.204, 1997.
DOI : 10.1007/978-3-7091-2662-2_1

J. D. Eshelby, The Determination of the Elastic Field of an Ellipsoidal Inclusion, and Related Problems, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.241, issue.1226, pp.376-396, 1226.
DOI : 10.1098/rspa.1957.0133

S. Eve, M. Gomina, A. Gmouh, A. Samdi, R. Moussa et al., Microstructural and mechanical behaviour of polyamide fibre-reinforced plaster composites, Journal of the European Ceramic Society, vol.22, issue.13, pp.2269-2275, 2002.
DOI : 10.1016/S0955-2219(02)00014-6

C. W. Fairhurst, Compressive Properties of Dental Gypsum, Journal of Dental Research, vol.39, issue.4, pp.812-824, 1960.
DOI : 10.1177/00220345600390040801

R. F. Feldman and J. J. Beaudoin, Microstructure and strength of hydrated cement, Cement and Concrete Research, vol.6, issue.3, pp.389-400, 1976.
DOI : 10.1016/0008-8846(76)90102-2

N. A. Fleck, On the cold compaction of powders, Journal of the Mechanics and Physics of Solids, vol.43, issue.9, pp.1409-1431, 1995.
DOI : 10.1016/0022-5096(95)00039-L

A. Fritsch, L. Dormieux, and C. Hellmich, Porous polycrystals built up by uniformly and axisymmetrically oriented needles: homogenization of elastic properties, Comptes Rendus M??canique, vol.334, issue.3, pp.151-157, 2006.
DOI : 10.1016/j.crme.2006.01.008

A. Fritsch, L. Dormieux, C. Hellmich, and J. Sanahuja, Tissue engineering using ceramics and polymers, ch. Micromechanics of hydroxyapatite-based biomaterials and tissue engineering scaffolds, pp.529-565, 2007.

E. J. Garboczi, K. A. Snyder, J. F. Douglas, and M. F. Thorpe, Geometrical percolation threshold of overlapping ellipsoids, Physical Review E, vol.52, issue.1, pp.819-828, 1995.
DOI : 10.1103/PhysRevE.52.819

S. Garcia-boivin, Retrait au jeune âge du béton : développement d'une méthode expérimentale et contribution à l'analyse physique du retrait endogène, Thèse de doctorat, p.104, 1999.

S. Garrault, E. Finot, E. Lesniewska, and A. Nonat, Study of C-S-H growth on C3S surface during its early hydration, Materials and Structures, vol.38, issue.278, pp.435-442, 2005.
DOI : 10.1617/14343

S. Garrault and . Gauffinet, Étude expérimentale et par simulation numérique de la cinétique de croissance et de la structure des hydrosilicates de calcium, produits d'hydratation des silicates tricalcique et dicalcique, Thèse de doctorat, pp.28-89, 1998.

D. P. Gaver, Observing Stochastic Processes, and Approximate Transform Inversion, Operations Research, vol.14, issue.3, pp.444-459, 1966.
DOI : 10.1287/opre.14.3.444

A. Gmira, Étude texturale et thermodynamique d'hydrates modèles du ciment, Thèse de doctorat, pp.83-148, 2003.

A. Gmira, M. Zabat, R. J. , -. Pellenq, and H. Van-damme, Microscopic physical basis of the poromechanical behavior of cement-based materials, Materials and Structures, vol.123, issue.1, pp.3-14, 2004.
DOI : 10.1007/BF02481622

A. Gmouh, S. Eve, A. Samdi, R. Moussa, J. Hamel et al., Changes in plaster microstructure by pre-stressing or by adding gypsum grains: microstructural and mechanical investigations, Materials Science and Engineering: A, vol.352, issue.1-2, pp.325-332, 2003.
DOI : 10.1016/S0921-5093(02)00938-3

D. W. Hadley, W. L. Dolch, and S. Diamond, On the occurrence of hollow-shell hydration grains in hydrated cement paste, Cement and Concrete Research, vol.30, issue.1, pp.1-6, 2000.
DOI : 10.1016/S0008-8846(99)00207-0

C. Haecker, E. J. Garboczi, J. W. Bullard, R. B. Bohn, Z. Sun et al., Modeling the linear elastic properties of Portland cement paste, Cement and Concrete Research, vol.35, issue.10, pp.1948-1960, 2005.
DOI : 10.1016/j.cemconres.2005.05.001

Z. Hashin, The Elastic Moduli of Heterogeneous Materials, Journal of Applied Mechanics, vol.29, issue.1, pp.143-150, 1962.
DOI : 10.1115/1.3636446

Z. Hashin, The Spherical Inclusion With Imperfect Interface, Journal of Applied Mechanics, vol.58, issue.2, pp.444-449, 1991.
DOI : 10.1115/1.2897205

A. S. Helle, K. E. Easterling, and M. F. Ashby, Hot-isostatic pressing diagrams: New developments, Acta Metallurgica, vol.33, issue.12, pp.2163-2174, 1985.
DOI : 10.1016/0001-6160(85)90177-4

C. Hellmich, L. Dormieux, A. Fritsch, and J. Sanahuja, Mechanical behaviour of hydroxyapatite biomaterials: an experimentally validated micromechanical model for elasticity and strength, Journal of Biomedical Materials Research part A, pp.28-44, 2008.

R. A. Helmuth and D. H. Turk, Elastic moduli of hardened Portland cement and tricalcium silicate pastes: effect of porosity, Symposium on Structure of Portland Cement Paste and Concrete, pp.135-144, 1966.

É. Hervé and A. Zaoui, inclusion-based micromechanical modelling, International Journal of Engineering Science, vol.31, issue.1, pp.1-10, 1993.
DOI : 10.1016/0020-7225(93)90059-4

R. Hill, A self-consistent mechanics of composite materials, Journal of the Mechanics and Physics of Solids, vol.13, issue.4, pp.213-222, 1965.
DOI : 10.1016/0022-5096(65)90010-4

H. M. Jennings, A model for the microstructure of calcium silicate hydrate in cement paste, Cement and Concrete Research, vol.30, issue.1, pp.101-116, 2000.
DOI : 10.1016/S0008-8846(99)00209-4

H. M. Jennings and S. K. Johnson, Simulation of Microstructure Development During the Hydration of a Cement Compound, Journal of the American Ceramic Society, vol.42, issue.11, pp.790-795, 1986.
DOI : 10.1111/j.1151-2916.1986.tb07361.x

H. M. Jennings, J. J. Thomas, J. S. Gevrenov, G. Constantinides, and F. J. Ulm, Nanostructure of C-S-H gel in cement paste as a function of curing conditions and relative humidity, Creep, shrinkage and durability of concrete and concrete structures, proceedings of Concreep 7, pp.19-37, 2005.

D. Jeulin, P. Monnaie, and F. Péronnet, Gypsum morphological analysis and modeling. Cement and Concrete Composites, pp.299-311, 2001.
DOI : 10.1016/s0958-9465(00)00066-4

M. C. Juenger, V. H. Lamour, P. J. Monteiro, E. M. Gartner, and G. P. Denbeaux, Direct observation of cement hydration by soft X-ray transmission microscopy Gypsum plasters, II. constitution and properties of the prepared ?hemihydrates, Journal of Materials Science Letters, vol.22, issue.19, pp.1335-1337, 1972.
DOI : 10.1023/A:1025731210337

W. F. Klima, The kinetics of crystal growth of calcium sulfate dihydrate, p.41, 1983.

W. Kreher, Residual stresses and stored elastic energy of composites and polycrystals, Journal of the Mechanics and Physics of Solids, vol.38, issue.1, pp.115-128, 1990.
DOI : 10.1016/0022-5096(90)90023-W

E. Kröner, Bounds for effective elastic moduli of disordered materials, Journal of the Mechanics and Physics of Solids, vol.25, issue.2, pp.137-155, 1977.
DOI : 10.1016/0022-5096(77)90009-6

T. H. Le, L. Dormieux, L. Jeannin, Y. Maalej, and J. Sanahuja, Micromechanical models of the strength of a sandstone, International Journal for Numerical and Analytical Methods in Geomechanics, p.203, 2008.

M. H. Le-chatelier, Recherches expérimentales sur la constitution des mortiers hydrauliques, Thèse de doctorat, p.86, 1887.

R. and L. Roy, Déformations instantanées et différées des bétons à hautes performances, Thèse de doctorat, pp.93-165, 1995.

R. P. Lohtia, Mechanism of creep in concrete, Roorkee University Research Journal, vol.12, issue.12, pp.37-47, 1970.

B. Loret, T. Hueckel, and A. Gajo, Chemo-mechanical coupling in saturated porous media: elastic???plastic behaviour of homoionic expansive clays, International Journal of Solids and Structures, vol.39, issue.10, pp.2773-2806, 2002.
DOI : 10.1016/S0020-7683(02)00151-8

A. E. Love, A treatise on the mathematical theory of elasticity, p.226, 1944.
URL : https://hal.archives-ouvertes.fr/hal-01307751

Y. Maalej, Comportement mécanique d'un milieu granulaire injecté par un coulis de ciment : étude expérimentale et modélisation micromécanique, Thèse de doctorat, pp.177-203, 0196.

Y. Maalej, L. Dormieux, and J. Sanahuja, Comportement ??lastique non lin??aire d'un milieu granulaire : approche microm??canique, Comptes Rendus M??canique, vol.335, issue.8, pp.461-466, 2007.
DOI : 10.1016/j.crme.2007.06.002

Y. Maalej, L. Dormieux, and J. Sanahuja, Micromechanical approach to the failure criterion of granular media, European Journal of Mechanics - A/Solids, vol.28, issue.3, pp.183-186, 0196.
DOI : 10.1016/j.euromechsol.2008.10.010

A. J. Majumdar, Glass Fibre Reinforced Cement and Gypsum Products, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.319, issue.1536, pp.31969-78, 1970.
DOI : 10.1098/rspa.1970.0166

. Meille, Étude du comportement mécanique du plâtre pris en relation avec sa microstructure, Thèse de doctorat, Insa, pp.28-31, 2001.

S. Meille and E. J. Garboczi, Linear elastic properties of 2D and 3D models of porous materials made from elongated objects. Modelling and Simulation in, Materials Science and Engineering, vol.9, issue.5, pp.371-390, 2001.
URL : https://hal.archives-ouvertes.fr/hal-00587075

F. Merlin, H. Lombois, S. Joly, N. Lequeux, J. Halary et al., Cement-polymer and clay-polymer nano- and meso-composites: spotting the difference, J. Mater. Chem., vol.101, issue.11, pp.3308-3315, 2002.
DOI : 10.1039/B205279M

J. Minet, Synthèse et caractérisation de silicates de calcium hydratés hybrides, Thèse de doctorat, p.83, 2003.

J. K. Mitchell, Fundamentals of soil behavior, p.28, 1993.

T. Mori and K. Tanaka, Average stress in matrix and average elastic energy of materials with misfitting inclusions, Acta Metallurgica, vol.21, issue.5, pp.1605-1609, 1973.
DOI : 10.1016/0001-6160(73)90064-3

C. Moyne and M. A. Murad, Electro-chemo-mechanical couplings in swelling clays derived from a micro/macro-homogenization procedure, International Journal of Solids and Structures, vol.39, issue.25, pp.6159-6190, 2002.
DOI : 10.1016/S0020-7683(02)00461-4

A. Nonat, The structure and stoichiometry of the C-S-H. Cement and Concrete Research, pp.1521-1528, 2004.

A. Nonat, A. Courault, and D. Damidot, A new model describing the variation of Ca/Si ratio with lime concentration in solution, Cement Wapno Beton, vol.8, pp.184-191, 2001.

R. E. Oberholster, Pore structure, permeability and diffusivity of hardened cement paste and concrete in relation to durability: status and prospects, 8 th International congress on chemistry of cement, pp.323-335, 1986.

R. J. Pellenq, N. Lequeux, and H. Van-damme, Engineering the bonding scheme in C???S???H: The iono-covalent framework, Cement and Concrete Research, vol.38, issue.2, pp.159-174, 2008.
DOI : 10.1016/j.cemconres.2007.09.026

URL : https://hal.archives-ouvertes.fr/hal-00265858

K. K. Phani, Young's modulus-porosity relation in gypsum systems, American Ceramic Society bulletin, vol.65, issue.38, pp.1584-1586, 1986.

B. Pichler, C. Hellmich, and J. Eberhardsteiner, Spherical and acicular representation of hydrates in a micromechanical model for cement paste: prediction of early-age elasticity and strength, Acta Mechanica, vol.128, issue.8, p.28, 2008.
DOI : 10.1007/s00707-008-0007-9

C. Plassard, Étude fondamentale des mécanismes à l'origine de la cohésion des nanoparticules de silicates de calcium hydratés par microscopie à force atomique, Thèse de doctorat, p.123, 2005.

P. and P. Castañeda, The effective mechanical properties of nonlinear isotropic composites, Journal of the Mechanics and Physics of Solids, vol.39, issue.1, pp.45-71, 0190.
DOI : 10.1016/0022-5096(91)90030-R

P. , P. Castañeda, and J. R. Willis, The effect of spatial distribution on the effective behavior of composite materials and cracked media, Journal of the Mechanics and Physics of Solids, vol.43, issue.12, pp.1919-1951, 1995.

T. C. Powers and T. L. Brownyard, Studies of the physical properties of hardened Portland cement paste (nine parts) Journal of the American Concrete Institute, 43, oct, p.85, 1946.

F. Péronnet, Caractérisation du comportement mécanique des plâtres Rapport de stage, génie physique des matériaux, p.64, 1994.

T. Rahman, W. Lutz, R. Finn, S. Schmauder, and S. Aicher, Simulation of the mechanical behavior and damage in components made of strain softening cellulose fiber reinforced gypsum materials, Computational Materials Science, vol.39, issue.1, pp.65-74, 2007.
DOI : 10.1016/j.commatsci.2006.01.032

I. G. Richardson, The nature of the hydration products in hardened cement pastes. Cement and Concrete Composites, pp.97-113, 2000.

W. Ruetz, An hypothesis for the creep of the hardened cement paste and the influence of simultaneous shrinkage, Proceedings of the Structure of Concrete and its Behavior under Load, pp.365-387, 1968.

J. Salençon, Introduction à l'élasto-plasticité et au calcul à la rupture. École polytechnique, p.52, 2000.

J. Salençon, Mécanique des milieux continus. École polytechnique, 2001.

M. E. Sanad, E. C. Combe, and A. A. Grant, The Use of Additives to Improve the Mechanical Properties of Gypsum Products, Journal of Dental Research, vol.61, issue.6, pp.808-810, 1982.
DOI : 10.1177/00220345820610063201

J. Sanahuja, Retrait de séchage et rupture d'un milieu poreux : approche micromécanique. Mémoire de master, msms, p.166, 2004.

J. Sanahuja and L. Dormieux, R??sistance d'un milieu poreux ?? phase solide h??t??rog??ne, Comptes Rendus M??canique, vol.333, issue.11, pp.818-823, 2005.
DOI : 10.1016/j.crme.2005.09.008

J. Sanahuja, L. Dormieux, and G. Chanvillard, Modelling elasticity of a hydrating cement paste, Cement and Concrete Research, vol.37, issue.10, pp.1427-1439, 2007.
DOI : 10.1016/j.cemconres.2007.07.003

J. Sanahuja, L. Dormieux, and G. Chanvillard, Mod??lisation de l'??lasticit?? d'une p??te de ciment au jeune ??ge, Revue Europ??enne de G??nie Civil, vol.128, issue.4, pp.1241-1268, 2007.
DOI : 10.1080/17747120.2007.9692986

URL : http://documents.irevues.inist.fr/bitstream/2042/16088/1/CFM2007-0123.pdf

J. Sanahuja, L. Dormieux, and G. Chanvillard, A reply to the discussion "Does C- S-H particle shape matter?" F.-J. Ulm and H. M. Jennings of the paper "Modelling elasticity of a hydrating cement paste, CCR Cement and Concrete Research, vol.37, issue.38, pp.8-91130, 2007.

E. Sanchez-palencia, Comportements local et macroscopique d'un type de milieux physiques heterogenes, International Journal of Engineering Science, vol.12, issue.4, pp.331-351, 1974.
DOI : 10.1016/0020-7225(74)90062-7

H. Schinkel, Creep of gypsum under flexural load, pp.38-64, 1993.

B. Simon and M. Bienfait, Structure et m??canisme de croissance du gypse, Acta Crystallographica, vol.19, issue.5, pp.750-756, 1965.
DOI : 10.1107/S0365110X65004310

V. Smilauer and Z. Bittnar, Microstructure-based micromechanical prediction of elastic properties in hydrating cement paste, Cement and Concrete Research, vol.36, issue.9, pp.1708-1718, 2006.
DOI : 10.1016/j.cemconres.2006.05.014

H. Stehfest, Algorithm 368: Numerical inversion of Laplace transforms [D5], Communications of the ACM, vol.13, issue.1, pp.47-49, 1970.
DOI : 10.1145/361953.361969

C. Stolz and A. Zaoui, Combined variational approach and morphological analysis to the behaviour of inhomogeneous elastic media. Comptes Rendus de l'Académie des Sciences, pp.143-150, 1991.

P. Suquet, Overall Properties of Nonlinear Composites, Comptes Rendus de l'Académie des Sciences, pp.563-571, 1995.
DOI : 10.1007/978-94-009-1756-9_19

P. Suquet, Effective behavior of non linear composites, Continuum micromechanics. Cism Courses and Lectures n, pp.132-172, 1997.

B. T. Tamtsia and J. J. Beaudoin, Basic creep of hardened cement paste A re-examination of the role of water, Cement and Concrete Research, vol.30, issue.9, pp.1465-1475, 2000.
DOI : 10.1016/S0008-8846(00)00279-9

E. I. Tazawa, Effect of Self Stress on Flexural Strength of Gypsum-Polymer Composites, Advanced Cement Based Materials, vol.7, issue.1, pp.1-7, 1998.
DOI : 10.1016/S1065-7355(97)00010-2

P. D. Tennis and H. M. Jennings, A model for two types of calcium silicate hydrate in the microstructure of Portland cement pastes, Cement and Concrete Research, vol.30, issue.6, pp.855-863, 2000.
DOI : 10.1016/S0008-8846(00)00257-X

J. M. Torrenti and F. Benboudjema, Mechanical threshold of cementitious materials at early age, Materials and Structures, vol.31, issue.4, pp.299-304, 2005.
DOI : 10.1007/BF02479294

URL : https://hal.archives-ouvertes.fr/hal-00023122

F. Ulm, G. Constantinides, and F. H. Heukamp, Is concrete a poromechanics material? -A multiscale investigation of poroelastic properties, Materials and Structures, vol.37, issue.1, pp.43-58, 2004.

F. Ulm, A. Delafargue, and G. Constantinides, Experimental microporomechanics Applied micromechanics of porous materials. Cism Courses and Lectures n, p.102, 2005.

F. Ulm and H. M. Jennings, Does C-S-H particle shape matter? A discussion of the paper "Modelling elasticity of a hydrating cement paste, Cement and Concrete Research, vol.37, issue.38, pp.8-91126, 2007.

K. Van-breugel, Simulation of hydration and formation of structure in hardening cementbased materials, pp.88-97, 1991.

K. Van-breugel, Numerical simulation of hydration and microstructural development in hardening cement-based materials (I) theory. Cement and Concrete Research, pp.319-331, 1995.

K. Velez, S. Maximilien, D. Damidot, G. Fantozzi, and F. Sorrentino, Determination by nanoindentation of elastic modulus and hardness of pure constituents of Portland cement clinker, Cement and Concrete Research, vol.31, issue.4, pp.555-561, 2001.
DOI : 10.1016/S0008-8846(00)00505-6

K. Velez and F. Sorrentino, Characterization of cementitious materials by nanoindentation Kurdowski Symposium "Science of cement and concrete, pp.67-77, 2001.

F. H. Wittmann, Creep and shrinkage mechanisms

. Wittmann, Creep and shrinkage in concrete structures, pp.129-161, 1982.

T. Wong, C. David, and W. Zhu, The transition from brittle faulting to cataclastic flow in porous sandstones: Mechanical deformation, Journal of Geophysical Research: Solid Earth, vol.102, issue.B2, pp.3009-3025, 1997.
DOI : 10.1029/96JB03281

A. Zaoui, Structural morphology and constitutive behavior of microheterogeneous materials Continuum micromechanics Cism Courses and Lectures n, pp.291-347, 1997.

A. Zaoui, Matériaux hétérogènes et composites École polytechnique, pp.133-224, 2000.

A. Zaoui, Continuum Micromechanics: Survey, Journal of Engineering Mechanics, vol.128, issue.8, pp.808-816, 2002.
DOI : 10.1061/(ASCE)0733-9399(2002)128:8(808)

URL : https://hal.archives-ouvertes.fr/hal-00111366

Z. Zhong and S. A. Meguid, On the elastic field of a spherical inhomogeneity with an imperfectly bonded interface, Journal of Elasticity, vol.46, issue.2, pp.91-113, 1997.
DOI : 10.1023/A:1007342605107

.. Schématisation-de-la-loi-d, évolution de la variable d'endommagement ? 1 , en fonction de la déformation de compression macroscopique, p.78

T. De-mori, pâte, estimé par un schéma auto-cohérent généralisé à 4 couches ou par un schéma, p.121