. Fig, 66: Schématisation d'une ligne de courant qui retrace l'histoire d'une particule de matì ere On présente différents calculs : un calcuí elastique et plusieurs calculsélastoplastiquescalculsélastoplastiques

H. Abendroth, A New Approach to Brake Testing, SAE Technical Paper Series, 1999.
DOI : 10.4271/850080

A. E. Anderson and R. A. Knapp, Hot spotting in automotive friction systems, Wear, vol.135, issue.2, pp.319-337, 1990.
DOI : 10.1016/0043-1648(90)90034-8

H. Askes, Mesh adaptivity methods : the ALE technique for localisation, TU Delft - Faculty of Civil Engineering, Mechanics & Structures Computational Mechanics, 1997.

T. P. Bailey, J. T. Buckingham, and A. H. Cruz, Development of thermal imaging and finite element techniques for optimization of brake disc design, 1991.

P. Ballard, D. Van, K. Deperrois, A. Papadopoulos, and I. V. , HIGH CYCLE FATIGUE AND A FINITE ELEMENT ANALYSIS, Fatigue & Fracture of Engineering Materials and Structures, vol.2, issue.4, pp.397-411, 1995.
DOI : 10.1016/0093-6413(77)90007-6

J. R. Barber, Thermoelastic instabilities in the sliding of conforming solids, Proc. Roy. Soc, pp.381-394, 1969.
DOI : 10.1016/0043-1648(70)90021-9

P. Boisse, P. Ladevèze, and P. Rouge, A large time increment method for elastoplastic problem, Eur. J. of Mech, vol.8, issue.4, pp.257-275, 1989.

A. S. Bonnet-bendhia and E. Luneville, Résolution numérique deséquationsdeséquations aux dérivées partielles, 1993.

J. P. Bricout, M. Watremez, and J. D. Guérin, Optimisation des freins du trainàtrain`trainà grande vitesse par de nouveaux matériaux céramiques, pp.6-7428, 1997.

H. Brunner, K. Augsburg, and J. Grochowicz, Studying brake judder in floating caliper brakes for passenger cars, ATZ Automobiltechnische Zeitschrift, vol.101, pp.22-30, 1999.

R. A. Burton, V. Nerlikar, and S. R. Kilaparti, Thermoelastic instability in a seal-like configuration, Wear, vol.24, issue.2, pp.177-188, 1973.
DOI : 10.1016/0043-1648(73)90230-5

E. A. Carneiro, L. Winocq, and J. Berthaud, Disc brakes of trucks : a technical innovation for heavy vehicles, Warrendale SAE, 1992.

J. L. Chaboche, H. Policella, and H. Haczmarek, Applicability of the SRP method and creep-fatigue approach to the LCHTF life prediction of in-100 alloy, 1978.

J. L. Chaboche, H. Haczmarek, and P. Raine, Sur les effets d'interaction de l'´ ecrouissage et de l'endommagement dans l'acier 316L, Recherche Aérospatiale, issue.3, pp.177-196, 1980.

E. Charkaluk, Dimensionnement des structuresàstructures`structuresà la fatigue thermomécanique, Thèse de l'Ecole Polytechnique, Spécialité Mécanique, 1999.

E. Charkaluk, M. L. Nguyen-tajan, and J. J. Thomas, Thermomechanical design in the automotive industry, Abaqus Users' Conference, pp.171-186, 2000.
URL : https://hal.archives-ouvertes.fr/hal-00104247

E. Charkaluk and A. Constantinescu, An energetic approach in thermomechanical fatigue for silicon molybdenum cast iron, Materials at High Temperatures, vol.1, issue.1, pp.373-380, 2000.
DOI : 10.1016/S0142-1123(98)00027-9
URL : https://hal.archives-ouvertes.fr/hal-00141689

L. F. Coffin, A study of the effect of cyclic thermal stresses on a ductile material, Trans. ASME, pp.53-76931, 1953.

L. F. Coffin, Fatigue at high temperatures " , Fatigue at elevated temperatures ASTM STP 520, pp.5-34, 1973.

M. Cohen and J. P. Sprimont, Optimisation de la déformation thermique des disques de frein " , 3` eme congrès International SIA " Méthodologies et techniques de simulation numérique, 1996.

H. Cole, Stresses produced in a half plane by moving loads, J. Applied Mechanics Trans ASME, vol.25, issue.80, pp.433-436, 2000.

R. Copin, G. Bodovillé, Y. Desplanques, G. Degallaix, Y. Berthier et al., Essais de freinage sur bancàéchellebanc`bancàbancàéchelle réduite d'un couple disque-garniture utilisé sur le TGV-PBKA, pp.141-150, 1998.

A. Curnier, Méthodes numériques en mécanique des solides, Presses polytechniques et universitaires romandes, 1993.

D. Van, K. Inglebert, G. Proix, and J. M. , Sur un nouvel algorithme de calcul de structuré elastoplastique en régime stationnaire " , 3` eme colloque " Tendances actuelles en calcul de structures, pp.387-400, 1985.

D. Van, K. Maitournam, and M. H. , Steady-state flow in classical elastoplasticity: Applications to repeated rolling and sliding contact, Journal of the Mechanics and Physics of Solids, vol.41, issue.11, pp.1691-1710, 1993.
DOI : 10.1016/0022-5096(93)90027-D

D. Van and K. , Macro-micro approach in high-cycle multiaxial fatigue Advances in multiaxial fatigue, ASTM STP, American Society for Testing and Materials, pp.120-130, 1991.

D. Van, K. Maitournam, and H. M. , Fatigue polycyclique des structures, 1996.

D. Van, K. Maitournam, H. M. Prasil, and B. , Elastoplastic analysis of repeated moving contact application to railways damage phenomena, Wear, vol.196, pp.77-81, 1996.
URL : https://hal.archives-ouvertes.fr/hal-00111519

D. Van, K. Dang, K. Van, and I. V. Papadoupoulos, Introduction to fatigue analysis in mechanical design by the multiscale approach High-Cycle Metal Fatigue in the Context of Mechanical Design, CISM Courses and Lectures n o 392 The dissipation of frictional energy from the interface of an annular disk brake, Proc.Instn.Mech.Engrs, pp.57-88201, 1984.

A. J. Day, Brake interface temperature prediction, 1990.

T. A. Dow, Thermoelastic effects in brakes, Wear, vol.59, issue.1, pp.213-221, 1980.
DOI : 10.1016/0043-1648(80)90279-3

V. Drobecq, Y. Gallo, and Y. Ravalard, Modélisation d'un système de freinage ferroviaire pour l'´ etude du crissement, Journées Européennes du Freinage 98, pp.71-80, 1998.

R. G. Dubensky, Experimental Techniques for Rotor Performance Measurements, SAE Technical Paper Series, 1985.
DOI : 10.4271/850078

P. Dufrenoy, Etude du comportement thermomécanique des disques de freins visàvis`visà vis des risques de défaillance, Thèse de l'université des sciences et technologies de Lille, 1995.

R. Eisengraber, J. Grochowicz, M. Schuster, K. Augsburg, and L. Koch, Comparison of Different Methods for the Determination of the Friction Temperature of Disc Brakes, SAE Technical Paper Series, 1999.
DOI : 10.4271/1999-01-0138

A. Floquet and M. C. Dubourg, Nonaxisymmetric Effects for Three-Dimensional Analysis of a Brake, Journal of Tribology, vol.116, issue.3, pp.401-408, 1994.
DOI : 10.1115/1.2928852

A. Floquet and M. C. Dubourg, Realistic Braking Operation Simulation of Ventilated Disk Brakes, Journal of Tribology, vol.118, issue.3, pp.466-472, 1996.
DOI : 10.1115/1.2831559

G. R. Halford, M. H. Hirschberg, and S. S. Manson, Temperature Effects on the Strainrange Partitioning Approach for Creep Fatigue Analysis, Fatigue at Elevated Temperature - ASTM STP 520, pp.658-669, 1973.
DOI : 10.1520/STP38877S

E. Hanus, M. H. Maitournam, D. Van, and K. , Pressure rolling contact: Steady state flow analysis and comparison with experimental data, International Journal of Solids and Structures, vol.33, issue.25, pp.253739-3753, 1996.
DOI : 10.1016/0020-7683(95)00210-3
URL : https://hal.archives-ouvertes.fr/hal-00111520

R. Hill, The mathematical theory of plasticity, 1950.

G. Hennequet, Martèlement en cours de freinage, pp.32-37, 1994.

K. L. Johnson, Contact mechanics, 1985.

B. L. Josefson, U. Stigh, and H. E. Hjelm, A Nonlinear Kinematic Hardening Model for Elastoplastic Deformations in Grey Cast Iron, Journal of Engineering Materials and Technology, vol.117, issue.2, pp.145-150, 1995.
DOI : 10.1115/1.2804521

Y. Jimbo, Development of high thermal conductivity cast iron for brake disc rotor, Warrendale SAE, pp.22-28, 1990.

T. K. Kao, J. W. Richmond, and A. Douarre, Brake disc hot spotting and thermal judder: an experimental and finite element study, International Journal of Vehicle Design, vol.23, issue.3/4, pp.497-507, 1974.
DOI : 10.1504/IJVD.2000.001896

F. E. Kennedy and F. F. Ling, A thermal, thermoelastic and wear simulation of a highenergy sliding contact problem, Journal of lubrification Technology, vol.23, pp.276-296, 2000.

F. E. Kennedy, F. Colin, A. Floquet, and R. Glovsky, Improved techniques for finite element analysis of sliding surface temperatures, pp.138-150, 1984.
DOI : 10.1016/B978-0-408-22164-1.50025-9

S. S. Kim, S. H. Lee, and S. M. Lee, Thermomechanical wear mecanism of friction brake, Proceedings of the international tribology conference, pp.1567-1572, 1995.

W. T. Koiter, General theorems for elasto-plastic solids " , Progress in solid mechanics, pp.165-221, 1960.

W. Kreitlow, F. Schrodter, and H. Matthai, Vibration and ???Hum??? of Disc Brakes under Load, SAE Technical Paper Series, 1985.
DOI : 10.4271/850079

L. Kwangjin and J. R. Barber, An experimental investigation of frictionally-excited thermoelastic instability in automotive disk brakes under a drag application, Journal of tribology, vol.116, pp.409-414, 1994.

P. Ladevèze, M??canique non lin??aire des structures, Revue Fran??aise de G??nie Civil, vol.1, issue.2, 1996.
DOI : 10.1080/12795119.1997.9692126

B. Larrouturou, Modélisation mathématique et numérique pour les sciences de l'ingénieur " , Majeure Science de l'ingénieur et calcul scientifique, 1988.

J. Lema??trelema??tre and J. L. Chaboche, Mécanique des matériaux solides, 1985.

M. P. Luong, D. Van, and K. , Infrared thermographic evaluation of fatigue limit in metals, 1992.

M. H. Maitournam, Formulation et résolution numérique desprobì emes thermoviscoplastiques en régime permanent, Thèse de l'Ecole Nationale des Ponts et Chaussées, 1989.

M. H. Maitournam, Finite Elements Applications Numerical Tools and Specific Fatigue Problems High-Cycle Metal Fatigue in the Context of Mechanical Design, CISM Courses and Lectures No, pp.169-187, 1999.

M. H. Maitournam and T. M. Nguyen-tajan, Approche multi-??chelle en fatigue polycyclique anisotherme, Comptes Rendus de l'Acad??mie des Sciences - Series IIB - Mechanics, vol.328, issue.5, pp.373-379, 2000.
DOI : 10.1016/S1620-7742(00)00049-0

J. Mandel, J. Zarka, and B. Halphen, Adaptation d'une structure elastoplastique a ecrouissage cinematique, Mechanics Research Communications, vol.4, issue.5, pp.309-314, 1977.
DOI : 10.1016/0093-6413(77)90007-6

S. S. Manson, Behaviour of materials under conditions of thermal stresses, 1953.

G. B. Mazet and T. Courtin, La simulation du freinage chez Messier-Bugatti, Journées Européennes du Freinage 98, pp.115-122, 1998.

S. Missori and A. Sili, Optimizing proportions of railway brake discs by temperature transients evaluation, ARCHIVE: Proceedings of the Institution of Mechanical Engineers, Part D: Transport Engineering 1984-1988 (vols 198-202), vol.202, issue.24, pp.91-99, 1988.
DOI : 10.1243/PIME_PROC_1988_202_161_02

F. Moirot, Etude de la stabilité d'unéquilibreunéquilibre en présence de frottement de Coulomb, Thèse de l'Ecole Polytechnique, 1998.

T. M. Nguyen-tajan, H. M. Maitournam, D. Van, and K. , Multi-scale approach for anisothermal high-cycle fatigue, 6th Int. Conf. on Biaxial/Multiaxial Fatigue and Fracture, 2000.

Q. S. Nguyen, On the elastic plastic initial-value problem and its numerical integration, Int. J. Num. Meth. Engng, vol.11, pp.817-832, 1977.
URL : https://hal.archives-ouvertes.fr/hal-00105639

Q. S. Nguyen and . Rahimian, Mouvement permanent d'une fissure en milieúmilieú elastoplastique, J. de Mech. Appl, vol.5, pp.95-120, 1981.

Q. S. Nguyen, Stability and nonlinear solid mechanics, J. Wiley & Sons, 2000.
URL : https://hal.archives-ouvertes.fr/hal-00105248

S. Panier, P. Dufrenoy, and D. Weichert, Modèle numérique de formation de points chauds dans les organes de friction, Colloque national en calcul des structures, pp.515-522, 2001.

I. V. Papadopoulos, CRITICAL PLANE APPROACHES IN HIGH-CYCLE FATIGUE: ON THE DEFINITION OF THE AMPLITUDE AND MEAN VALUE OF THE SHEAR STRESS ACTING ON THE CRITICAL PLANE, Fatigue and Fracture of Engineering Materials & Structures 21, pp.269-285, 1998.
DOI : 10.1046/j.1460-2695.1998.00459.x

I. V. Papadopoulos, Multiaxial Fatigue Limit Criterion of Metals, pp.89-143, 1999.
DOI : 10.1007/978-3-7091-2474-1_3

S. Pommier, Fatigue thermique d'une roue-frein, Journées Européenes du Freinage, vol.98, 1998.

G. Righes and P. M. Calderale, Thermal transient analysis of automotive disk brakes and cylinder liners, ATA Ingegneria Automotivoristica Motor Car Engineering, vol.52, issue.12, pp.509-515, 1999.

H. Sakamoto, K. Toyama, K. Hirakawa, and M. Nakata, Fracture analysis and product development of brake disc, ASME International Mechanical Engineering Congress and Exposition, 1997.

J. Salençon, Méthode des lignes de glissement Mise en forme des métaux et alliages ch. XII, Ecole d'´ eté de métallurgie Physique de Villars-sur-Ollon, 1975.

F. Samie and D. C. Sheridan, Contact Analysis for a Passenger Car Disc Brake, SAE Technical Paper Series, pp.9-10, 1987.
DOI : 10.4271/900005

J. J. Santini and F. E. Kennedy, An experimental investigation of surface temperatures and wear in disk brakes, Lub.Eng, vol.116, pp.402-417, 1975.

S. Du, P. Zagrodzki, J. R. Barber, and G. M. Hulbert, FINITE ELEMENT ANALYSIS OF FRICTIONALLY EXCITED THERMOELASTIC INSTABILITY, Journal of Thermal Stresses, vol.312, issue.2, pp.185-201, 1997.
DOI : 10.1080/01495739608946168

J. C. Simo and T. J. Hughes, Computational inelasticity, 1998.

R. P. Skelton, Energy criterion for high temperature low cycle fatigue failure, Materials Science and Technology, vol.1, issue.5, pp.427-439, 1991.
DOI : 10.1115/1.3265565

M. Tirovic and A. J. Day, Disc brake interface pressure distributions, ARCHIVE: Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 1989-1996 (vols 203-210), vol.205, issue.24, pp.137-146, 1991.
DOI : 10.1243/PIME_PROC_1991_205_162_02

E. Thoms, Disc brakes for heavy vehicles, Conf. on disc brakes for commercial vehicles, C464/88, pp.133-137, 1988.

H. J. Tumbrink, Measurement of Load Distribution on Disc Brake Pads and Optimization of Disc Brakes Using the Ball Pressure Methods, SAE Technical Paper Series, 1989.
DOI : 10.4271/890863

F. Vallet, Etude de la fissuration d'un disque de freinàfrein`freinà partir de l'analyse de son comportement thermomécanique, Thèse de l'INSA de Lyon, 1999.

H. R. Wentenkamp and R. M. Kipp, Hot spot heating by composite shoes, J.Eng.Ind, pp.453-458, 1976.

J. Zarka, Direct analysis of elastic-plastic structures with ???overlay??? materials during cyclic loading, International Journal for Numerical Methods in Engineering, vol.11, issue.2, pp.225-235, 1980.
DOI : 10.1002/nme.1620150206

J. Zarka, J. Frelat, G. Inglebert, and P. Kasmai-nanidi, A new approach to inelastic analysis of structures, Martinus Nijhoff, 1988.

J. L. Zhou and A. L. Tits, Nonmonotone line search for minimax problems, Journal of Optimization Theory and Applications, vol.14, issue.3, pp.455-476, 1993.
DOI : 10.1007/BF00939377