A. S. Nguyen-q, Determination of the limit response in cyclic plasticity, Computational plasticity, 1989.

A. F. , C. G. , F. R. Morin-g, Q. S. , and R. P. , Identification of viscoplastic constitutive and creep-fatigue damage coefficients to use in Abaqus automotive structural calculations with the Zmat library, 2002.

. A. Benallal and C. A. Ben, Damage and rupture of viscoplastic structures u nder anisothermal cyclic loadings, Proceedings of MECAMAT, pp.37-52, 1987.

B. P. Bussy-p and . Ladevèze-p, A new approach in non-linear mechanics : the large time increment method, Int. J. Num. Meth. Eng, vol.29, pp.647-663, 1990.

. P. Boisse, Mécanique non linéaire, cours de l'Esem, 1999.

. O. Boussac, Propriétés physiques d e l'AS7G03, rapport interne PSA, 1998.

C. A. , C. T. , and L. A. Géradin-m, A multiharmonic method for non-linear vibration analysis, Int. J. Num. Meth. Eng, vol.37, pp.1593-1608, 1994.

C. J. Stoltz-c, Détermination des durées de vie des aubes de turbine à gaz, Revue Française de Mécanique, pp.37-47, 1974.

. E. Charkaluk, Implémentation d'une User Subroutine UMAT dans Abaqus Standard, 2000.

C. E. Constantinescu, An energetic approach in thermomechanical fatigue for silicon molybdenum cast iron, Materials at high temperature, vol.17, issue.3, pp.373-380, 2000.
URL : https://hal.archives-ouvertes.fr/hal-00141689

. E. Charkaluk, Note de synthèse de l'analyse fiabiliste en fatigue thermique, 2001.

C. J. Ladevèze-p, a large time increment approach for cyclic viscoplasticity, Int. J. of Plasticity, vol.9, pp.141-157, 1993.

C. J. Ladevèze-p and . Talbot-p, a large time increment approach for thermo-mechanical problems, Advances in Engineering software, pp.583-593, 1999.

C. T. Cardona-a and . Geradin-m, Etude du frottement multiharmonique : etude de faisabilité du système à N ddl, Rapport interne du LTAS-Dynamique des Constructions Mécaniques, 1992.

. Dang and . K. Van, Sur la résistance à la fatigue des métaux , Sciences Technique Armement, 1973.

. Dang and . K. Van, Introduction to fatigue analysis in mechanical design by the multiscale approach, High-Cycle Metal Fatigue in the Context of Mechanical Design, CISM Courses and Lectures, pp.57-88, 1999.
URL : https://hal.archives-ouvertes.fr/hal-00112495

D. M. Tang-a and S. X. Hazine-r, An overview of Abaqus use in engine engineering at Ford Motor Company, 2002.

F. Co and . P. Armstrong, Convergent Internal Stresses and Steady Cyclic State of stress, J. Strain Analysis, vol.1, p.154, 1966.

H. G. Hirschberg-m and . S. Manson-s, temperature effects on the strainrange partitioning approach for creep fatigue analysis, Fatigue at Elevated Temperatures, ASTM, vol.520, pp.658-669, 1973.

H. B. Nguyen-q, sur les matériaux standards généralisés, J. mécanique, vol.14, issue.1, pp.39-63, 1975.

H. B. Halphen, L'accommodation des structures élastoplastiques à écrouissage cinématique, Comptes Rendus Acad. Sc. Paris Série A, t, vol.283, pp.799-802, 1976.

K. L. and H. S. Vaucher-r, Analyse simplifiée ? Détermination des états limites et des contraintes résiduelles ? Validation sur des structures tridimensionnnelles, XVème Congrés Français de Mécanique, 2001.

L. P. Savalle-s, An efficient cycle jump technique for viscoplastic structure calculations involving large number of cycles, Second Int, Conf on Computational Plasticity, pp.591-602, 1989.

. M. Mai-89-]-maïtournam-h, . M. Maïtournam-h, and T. J. Pommier-b, Formulation et résolution numérique thermoviscoplastique en régime permanent Détermination de la réponse asymptotique d'une structure anélastique sous chargement thermomécanique cyclique, Thèse de l'Ecole Nationale des Ponts et Chaussées, pp.703-708, 1989.

. Mao and . N. Maouche, Modélisation des phénomènes d'endommagements dus aux contacts à faible amplitude de débattement, p.113, 1997.

. Mao, M. N. Maouche, and D. K. Van, On a new method of evaluation of the inelastic state due to moving contacts, Wear, pp.203-204, 1997.

. E. Nicouleau-bourles, M. N. El, and C. G. , Thermomecanical fatigue of aluminium alloys : experimental study and numerical simulation, Thermal Stresses 99, pp.241-244, 1999.

N. M. Peigney and . Stolz-c, Modélisation thermomécanique des disques de frein par une approche eulérienne, thèse de l'Ecole Polytechnique, Approche par contrôle optimal des structures élastoviscoplastiques sous chargement cyclique, Comptes Rendus Acad. Sc. Paris Série II b, pp.643-648, 2001.

S. J. and L. J. Desmorat-r, Multiaxial creep-fatigue under anisothermal conditions, Fatigue Fract Engng Mater Struct, vol.23, pp.241-252, 2000.

S. J. Taylor, Consistent tangent operators for rate-independent plasticity, Comp. Meth. Appl. Mech. Eng, vol.48, pp.101-118, 1985.

S. J. Hughes-t, [SIN 59] SINES G., Behavior of metals under complex static and alternating stresses, Metal Fatigue, pp.145-169, 1959.

. P. Skelton-r, . T. Vilhelmsen, and . G. Webster, Energy criteria and cumulative damage during fatigue crack growth, International Journal of Fatigue, vol.20, issue.9, pp.641-649, 1998.
DOI : 10.1016/S0142-1123(98)00027-9

T. T. Sasaki-k, Inelastic behavior and evaluation method for low cycle fatigue of aluminium alloy, Revue technique d'Isuzu, 1999.

T. J. Perroud-g and M. D. Bignonnet-a, Fatigue design and reliability in the automotive industry, Marquis editor, Fatigue Design'98-3 rd International Symposium on Fatigue, pp.1-11, 1998.

L. Verger and C. E. Constantinescu-a, On the simulation of large viscoplastic structures under anisothermal cyclic loading, IUTAM Creep in Structures la fatigue thermomécanique d'un alliage d'aluminium, 2000.

Z. J. , F. J. , and I. G. Kasmai-navidi, A new approach in inelastic analysis of structures, CADLM, 1990.