S. Jarny, P. Monnet, and C. Philippe, Ecoulement de fluide thixotrope à seuil entre deux disques :rhéométrie locale et simulations numériques, 19éme Congrès Français de Mécanique, AUM-AFM, pp.29-31, 2007.

H. V. Atkinson, Modelling the semisolid processing of metallic alloys, Progress in Materials Science, pp.341-412, 2005.

H. Desplanches and J. Chevalier, Mélange des milieux pâteux de rhéologie complexe. Théorie. Techniques de l'Ingénieur, pp.1-20

P. Kumar, C. L. Martin, and S. Brown, Shear rate thickening flow behavior of semisolid slurries. Metallurgical transactions A, pp.1107-1116, 1993.

L. Salvo, W. R. Loué, and M. Suéry, Influence of Prior Solidification Conditions on the Structure and Rheological Behavior of Partially Remelted Al-Si Alloys., ISIJ International, vol.35, issue.6, pp.35-798, 1995.
DOI : 10.2355/isijinternational.35.798

M. Suery, Mise en forme des alliages métalliques à l'état semi-solide

Z. Fan, Semisolid metal processing, International Materials Reviews, vol.11, issue.2, pp.47-49, 2002.
DOI : 10.1016/0956-716X(95)93218-S

W. R. Loué, Evolution microstruturale et comportement rhéologique d'alliages Al-Si à l'état semi-solide, 1992.

W. R. Loué, Rheology of partially solidified AlSi7Mg0.3 and influence of SiC additions, Material Science and Engineering, issue.A151, pp.255-262, 1992.

P. A. Joly and R. Mehrabian, The rheology of a partially solid alloy, Journal of Materials Science, vol.17, issue.3, pp.1393-1418, 1976.
DOI : 10.1007/BF00540873

C. Rouff, Contribution à la caractérisation et à la modélisation du comportement d'un acier à l'état semi-solide. Application au thixoforgeage, 2003.

C. Rouff, Characterization of semi-solid materials, pp.523-527, 2000.

C. Rouff, Mechanical behaviour of semi-solid materials, in 6th Semisolid Processing of alloys and composites, pp.405-410, 2000.

A. Metz and M. C. Flemings, Hot tearing in cast metals. Trans. Amer. Foundrymen's Society, pp.329-334, 1969.

T. G. Nguyen, Modélisation du comportement rhéologique d'alliages à l'état semi-solide, 1991.

Y. Ito, M. C. Flemings, and J. A. Cornie, Rheological behavior and microstruture of Al-6,5wt%Si alloy. Nature and properties of semi-solid materials, Metal and Materials society, pp.3-17, 1991.

M. C. Flemings, R. G. Riek, and K. P. Young, Rheocasting, Materials Science and Engineering, vol.25, pp.103-117, 1976.
DOI : 10.1016/0025-5416(76)90057-4

M. Modigell and J. Koke, Time-dependent rheological properties of semi-solid metal alloys, Mechanics Time-Dependent Materials, pp.15-30, 1999.

C. J. Quaak, Rheology of partially solidified aluminium alloys and composites, 1996.

D. H. Kirkwood, Semisolid processing of high melting point alloys, Proceedinds of the 4th International Conference on Semi-solid Processing of alloys and composites, pp.320-325, 1996.

J. Koke and M. Modigell, Flow behaviour of semi-solid metal alloys, Journal of Non-Newtonian Fluid Mechanics, vol.112, issue.2-3, pp.141-160, 2003.
DOI : 10.1016/S0377-0257(03)00080-6

M. C. Flemings, Behaviour of metal alloys in the semisolid state, Metallurgical Transactions A, issue.22A, pp.957-981, 1991.

S. C. Bergsma, Semi-solid thermal transformations of Al-Si alloys and the rsulting mechanical properties, Material Science and Engineering, issue.A237, pp.24-34, 1997.

J. L. Wang, Y. H. Su, and C. Y. Tsao, STRUCTURAL EVOLUTION OF CONVENTIONAL CAST DENDRITIC AND SPRAY-CAST NON-DENDRITIC STRUCTURES DURING ISOTHERMAL HOLDING IN THE SEMI-SOLID STATE, Scripta Materialia, vol.37, issue.12, pp.37-49, 1997.
DOI : 10.1016/S1359-6462(97)00394-1

T. Y. Liu, Response of semi-solid Sn-15 pct Pb to rapid shear-rate changes, Metallurgical and Materials Transactions A, vol.212, issue.2, pp.409-417, 2003.
DOI : 10.1007/s11661-003-0342-3

. Contexte-du-thixoforgeage-de-l-'acier-79, P. Eisen, and K. Young, Diecasting system for semiliquid and semisolid metalcasting -applications. in 6th int. conf on semi-solid processing of alloys and composites, 2000.

H. Kaufmann, H. Wabusseg, and P. J. Uggowitzer, Metallurgische und verfahrenstechnische Aspekte des NRC semi-solid Giesstechnologie, in Aluminium, pp.70-75, 2000.

H. V. Atkinson, M. Takita, and H. Nomura, Current status of semi-solid processing of metallic materials. in 10th int. conf. on material forming ESAFORM Effect of semi-solid processing on solidification microstructure and mechanical properties of gray cast iron, Materials science and engineering, pp.166-173, 2006.

H. Peng and W. M. Hsu, Development on rheomolding of magnesium parts. in 6th Int. conf. on semi-solid processing of alloys and composites, 2000.

S. Ji, Z. Fan, and M. J. Bevis, Materials science and engineering Sonderforscungsbereich 289 (SFB289) -Thixoforming -Abschlusskoloquium, pp.210-217, 2001.

K. Steinhoff, A new integrated production concept for semi-solid processing of high quality Al-products. in 6th Int. conf. semi-solid processing of alloys and composites, 2000.

F. Knauf, Influence of tool geometry, tool coating and process parameters in thixoextrusion of steel. in 10th int. conf. on material forming Esaform, 2007.

R. Kopp, Thixoextrusion of aluminium wrought alloys. in 5th int. conf. on semi-solid processing of alloys and composites. 1998. Golden, United States. 90. Wahlen, A. and U. Feurer. Thixoforming -ein neues Near-Net-Shape Umformverfahren, 1997.

S. Laplante, Extrusion of thixocast Semi-solid A356-15Si Cp cylindrical sections. in 4th int. conf. on semi-solid processing of alloys and composites, 1996.

. Contexte-du-thixoforgeage-de-l-'acier-92, M. Kiuchi, and R. Kopp, Mushy / Semi-Solid Metal Forming Technology ? Present and Future, Annals of the CIRP, issue.51, pp.1-18, 2002.

L. Pasternak, Semi-solid production processing of magnesium alloys by thixomolding. in 2nd int. conf. on semi-solid procesing of alloys and composites. 1992. Cambridge MA, United States. 95. Walukas, D., et al. Thixomolding -technologie opportunities and practical uses. in 6th int. conf. on semi-solid processing of alloys and composites Semi-solid metal forming alloys and composites. in Symposium on the Nature and Properties of Semi-solid materials Near net shaping by semi-solid metal processing, Materials and Design, vol.21, pp.387-394, 1992.

L. Berviller, Conception et fabrication intégrées de pièces Net Shape. Application aux différentiels forgés, in ENSAM Metz, 2005.

P. Cezard and T. Sourmail, Thixoforming of Steel : a state of the art from an industrial point of view, Journal Solid State Phenomena, pp.141-143, 2008.

S. P. Midson, Semi-solid forming high temperature alloys, Proc. of the 2nd Int. Conf. on Semi-Solid Processing of Alloys and Composites. in Semi- Solid Processing of Alloys and Composites, 1992.

M. Kiuchi, S. Sugiyama, and M. Arai, Experimental study on mushy metal forming, Journal of JSTP, vol.37, pp.1219-1224, 1996.

A. Rassili, Improvement of materials and tools for thixoforming of steels, 8th Int. Conf. on Semi-Solid Processing of Alloys and Composites, 2004.

B. Nohm, U. Morjan, and D. Hartmann, Thixoforming of steel. in Semi-solid processing of alloys and composites, 2000.

M. Robelet, Method of manufacture of a piston for an internal combustion engine, and piston thus obtained, pp.1443200-1443201

A. Behrens, Investigations on steel grades and tool materials for thixoforging, 8th Int. Conf. on Semi-Solid Processing of Alloys and Composites, 2004.

A. Behrens, B. Haller, and D. Fischer, Thixoforming/semi-solid forming : Thixoforging of steel using ceramic tool materials, Steel Research, vol.8, issue.9, pp.75-561, 2004.

K. H. Fuller, Final technical repot of BMBF-Project N°03N 5024, 2005.

C. J. Beyer, Entwicklung prozessoptimierter Werkzeugtechnologien anhand eines seriennahen Zielbauteiles beim Thixoschmieden von Stahl, p.134, 2006.

B. A. Behrens, Introduction of a full automated process for the production of automative steel parts, International conference on Semi-Solid Processing of Alloys and Composites, 2004.

A. Behrens, Series Production of Thixoformed Steel Parts. Solid State Phenomena, pp.116-117, 2006.

H. Bramann, Casting of a cold work steel alloy in semi-solid state, Journal of Materials Processing Technology, vol.155, issue.156, pp.155-156, 2004.
DOI : 10.1016/j.jmatprotec.2004.04.219

V. Favier, Mise en forme des matériaux semi-solides. in Mécamat, pp.21-25, 2002.

V. Favier, Micro-macro modelling of the isothermal steady-state behaviour of semi-solids, International Journal of Forming Processes, issue.7, pp.177-194, 2004.

V. Favier, Mise en forme des matériaux semi-solides, Modélisation micro-macro du comportement isotherme et stationnaire des matériaux semisolides, Matériaux, pp.21-25, 2002.

C. Rouff, Micro-macro modelling of the steady-state semi-solid behaviour, 5th international Conference on Material Forming, Esaform, M. Pietrzyk, pp.679-682, 2002.

C. Rouff, Micro-macro modeling of the isothermal steady-state semisolid behavior. in 7th Semi-solid Processing of alloys and composites, 2002.

P. Cezard, Impact des effets thermiques sur le comportement du matériau lors de la mise en forme des aciers à l'état semi-solide : analyse expérimentale et numérique, ENSAM Metz, 2006.

M. Modigell and J. Koke, Time-dependent rheological properties of semi-solid metal alloys, Mechanics Time-Dependent Materials, pp.15-30, 1999.

J. Koke and M. Modigell, Flow behaviour of semi-solid metal alloys, Journal of Non-Newtonian Fluid Mechanics, vol.112, issue.2-3, pp.141-160, 2003.
DOI : 10.1016/S0377-0257(03)00080-6

C. Rouff, Contribution à la caractérisation et à la modélisation du comportement d'un acier à l'état semi-solide. Application au thixoforgeage, 2003.

P. Cezard, Simulation of semi-solid thixoforging using a micro-macro constitutive equation, Computational Materials Science, vol.32, issue.3-4, pp.323-328, 2005.
DOI : 10.1016/j.commatsci.2004.09.036
URL : https://hal.archives-ouvertes.fr/hal-00316467

D. Fischer, Entwiclung eines vaullautomatisierten Produktionsprozesses für die Hertsellung von Stahlbauteilen durch Thixoschmieden, 2008.

D. I. Uhlenhaut, Structure and properties of a hypoeutectic chromium steel processed in the semi-solid state, Acta Materialia, vol.54, issue.10, pp.54-2727, 2006.
DOI : 10.1016/j.actamat.2006.02.021

J. Li, S. Sugiyama, and J. Yanagimoto, Microstructural evolution and flow stress of semi-solid type 304 stainless steel, Journal of Materials Processing Technology, vol.161, issue.3, pp.161-396, 2005.
DOI : 10.1016/j.jmatprotec.2004.07.063

A. Boutonnet, Etude de la résistance thermique de contact à l'interface de solides déformables en frottement : application aux procédés de forgeage, p.241, 1998.

P. Baqué, E. De, and L. , Filage à chaud non lubrifié. Etude des écoulements par une méthode énergétique, in Revue Métallurgique, pp.475-496, 1973.

E. Felder, Effet thermique de la mise en forme "théorie et phénomènes volumiques

R. Bigot, V. Favier, and C. Rouff, Characterisation of semi-solid material mechanical behaviour by indentation test, Journal of Materials Processing Technology, vol.160, issue.1, pp.43-53, 2005.
DOI : 10.1016/j.jmatprotec.2004.03.016

P. Cezard, R. Bigot, V. Favier, and M. Robelet, Thixoforming of Steel -Influence of thermal parameters, Solid State Phenomena, pp.116-117, 2006.
URL : https://hal.archives-ouvertes.fr/hal-00298133

E. Lugscheider, H. Th, D. Neuschiitz, O. Kyrylov, R. Prange et al., Material- Concepts for Dies for SSM-forming of steel, Proc. of the 6th Int. Conf. on Semi-Solid Processing of Alloys and Composites, pp.587-592, 2000.

M. Z. Omar, E. J. Palmiere, A. A. Howe, H. V. Atkinson, and P. Kapranos, Thixoforming of a high performance HP9/4/30 steel, Materials Science and Engineering: A, vol.395, issue.1-2, pp.1-253
DOI : 10.1016/j.msea.2004.12.013

A. Rassili, M. Robelet, and D. Fischer, Series production of thixoformed steel parts, Proc. of the 9th ESAFORM Conf. on material forming, pp.819-822, 2006.

H. Shimahara and R. Kopp, Investigations of basic data for the semi-solid forging of steels, Proc. of the 8th Int. Conf. on Semi-Solid Processing of Alloys and Composites, 2004.

M. Modigell, L. Pape, and M. Hufschmidt, Rheological properties of semi-solid metallic alloys, Proc. of the 8th ESAFORM Conf. on material forming, pp.1111-1114, 2005.

P. Cezard, Impact des effets thermiques sur le comportement du materiau lors de la mise en forme des aciers a l'etat semi-solide : Analyses experimentale et numerique, 2006.

Z. Fan, Semisolid metal processing, International Materials Reviews, vol.11, issue.2, pp.47-49, 2002.
DOI : 10.1016/0956-716X(95)93218-S

P. Kumar, C. Martin, and S. B. Brown, Shear rate thickening flow behavior of semisolid slurries, Metallurgical Transactions A, vol.76, issue.5, pp.1107-1116, 1993.
DOI : 10.1016/0022-0248(86)90021-7

D. H. Kirkwood, Semisolid metal processing, International Materials Reviews, vol.3, issue.1, pp.173-189, 1994.
DOI : 10.1016/0921-5093(91)90232-C

G. Chiarmetta, L. Zanardi, P. Cezard, R. Bigot, E. Becker et al., Thixoforming of Steel: New tools conception to analyse thermal exchanges and strain rate effectsContribution à la caractérisation et à la modélisation du comportement d'un acier à l'état semisolide Micro-macro modelling of the isothermal steady-state behaviour of semi-solids Characterization of semi-solid material mechanical behavior by indentation testIdentification des paramètres rhéologiques par essais d'indentation," 14éme Congrès Français de Mécanique, AUM-AFM, Toulouse, 30 août -3 septembrepp 1999 Thixoforming of Steel ? Influence of thermal parameters. Solid State Phenomena 116-117Thixoforming -Formgebung im teilerstarrten ZustandInfluence de la vitesse de mise en forme et du cycle de chauffe sur le thixoforgeage des aciersAcier pour construction mécanique, procédé de mise en forme à chaud d'une pièce de cet acier Thixoforged damper brackets made of the steel grades HS6-5-3 and 100Cr6Micro-macro modelling of the steadystate semi-solid behaviour and finite element simulation Simulation of semi-solid thixoforging using a micro-macro constitutive equation, Proc of Thermprocess SymposiumThixoforming of Steel : New Tools Conception to Analyse Thermal Exchanges and Strain Rate Effects," ESAFORM, Zaragossa Metallography and Microstuctures20] P. Cezard, V. Favier, R. Bigot, M. Berveiller, and M. Robelet 8th Semi-solid Processing of alloys and composites] P. Cezard, V. Favier, R. Bigot, T. Balan, and M. Berveiller, pp.235-244, 1994.

G. Chiarmetta, Thixoformage et gain de poids : application industrielle du formage à l'état semi-solide, Hommes et Fonderie, issue.302, pp.29-34, 2000.

G. Chiarmetta, Thixoforming of automobile components Proceeding of the 4th international conference on semi-solid processing of alloys and composites, pp.204-207, 1996.

M. Suery, Mise en forme des alliages métalliques à l'état semi-solide, Hermes Sciences Traité MIM, 2002.

H. V. Atkinson, Modelling the semisolid processing of metallic alloys, Progress in Materials Science, pp.341-412, 2005.

P. Cezard, Thixoforming of Steel: New Tools Conception to Analyse Thermal Exchanges and Strain Rate Effects, AIP Conference Proceedings, 2007.
DOI : 10.1063/1.2729670
URL : https://hal.archives-ouvertes.fr/hal-01090480

C. Rouff, Contribution à la caractérisation et à la modélisation du comportement d'un acier à l'état semi-solide. Application au thixoforgeage, 2003.

V. Favier, Micro-macro modelling of the isothermal steady-state behaviour of semi-solids, International Journal of Forming Processes, issue.7, pp.177-194, 2004.

P. Cezard, Impact des effets thermiques sur le comportement du matériau lors de la mise en forme des aciers à l'état semi-solide : analyse expérimentale et numérique, 2006.

E. Becker, Influence de la vitesse de mise en forme et du cycle sur le thixoforgeage des aciers. in HSIMP, pp.13-14, 2007.
URL : https://hal.archives-ouvertes.fr/hal-01084855