]. L. Adams and L. , Rebenfeld : Permeability characteristics of multilayer fiber reinforcements, BIBLIOGRAPHIE Polym. Compos, vol.12, pp.1313-1330, 1991.

]. P. Adler, Porous Media : Geometry and Transports, 1992.

S. G. Advani, M. V. Bruschke, and R. S. Parnas, Resin transfer molding flow phenomena in polymeric composites. Flow and Rheology in Polymer Composites Manufacturing, pp.465-515, 1994.

]. G. Allaire, Homogenization of the Navier-Stokes equations and derivation of Brinkman's law, Applied Mathematics for Engineering Sciences, 1991.

B. T. Aström, R. B. Pipes, and S. G. Advani, On Flow through Aligned Fiber Beds and Its Application to Composites Processing, Journal of Composite Materials, vol.26, issue.9, 1992.
DOI : 10.1177/002199839202600907

]. P. Badel, E. Vidal-sallé, and P. Boisse, Computational determination of in-plane shear mechanical behaviour of textile composite reinforcements, Computational Materials Science, vol.40, issue.4, pp.439-448, 2007.
DOI : 10.1016/j.commatsci.2007.01.022
URL : https://hal.archives-ouvertes.fr/hal-00380799

]. P. Badel, E. Vidal-salle, and P. Boisse, Large deformation analysis of fibrous materials using rate constitutive equations, Computers & Structures, vol.86, issue.11-12, pp.1164-1175, 2008.
DOI : 10.1016/j.compstruc.2008.01.009
URL : https://hal.archives-ouvertes.fr/hal-00381428

]. P. Badel, S. Gauthier, E. Vidal-salle, and ;. P. Boisse, Rate constitutive equations for computational analyses of textile composite reinforcement mechanical behaviour during forming, Composites Part A: Applied Science and Manufacturing, vol.40, issue.8, 2008.
DOI : 10.1016/j.compositesa.2008.04.015

]. P. Badel, E. Vidal-salle, E. Maire, and P. Boisse, Simulation and tomography analyzis of textile composite reinforcement deformation at the mesoscopic scale, Composites Science and Technology, On line, 2008.

E. B. Belov, S. V. Lomov, I. Verpoest, T. Peters, D. Roose et al., Modelling of permeability of textile reinforcements: lattice Boltzmann method, Composites Science and Technology, vol.64, issue.7-8, pp.7-8, 2004.
DOI : 10.1016/j.compscitech.2003.09.015

]. Boubaker, B. Haussy, B. Ganghoffer, and J. , Discrete models of woven structures. Macroscopic approach, Composites Part B: Engineering, vol.38, issue.4, pp.498-505, 2007.
DOI : 10.1016/j.compositesb.2006.01.007

]. A. Berdichevski and Z. Cai, Preform permeability predictions by self-consistent method and finite element simulation, Polymer Composites, vol.100, issue.2, pp.132-143, 1993.
DOI : 10.1002/pc.750140207

O. K. Bergsma and J. Huisman, Deep drawing of fabric reinforced thermoplastics, Proceedings of the 2nd Int. Conf. on Computer Aided Design in Composite Material Technology, Brebbia C.A. and all editors, pp.323-333, 1988.

]. J. Bear, Dynamics of Fluids in Porous Media, Soil Science, vol.120, issue.2, 1972.
DOI : 10.1097/00010694-197508000-00022

S. Bickerton and S. G. Advani, Characterization of corner and edge permeabilities during mold filling in resin transfer molding, Proceedings of ASME 143-150, 1995.

]. A. Birley, B. Haworth, and J. Batchelor, Physics of plastics: processing, properties, and materials engineering, p.528, 1991.

]. P. Boisse, A. Gasser, B. Hagege, and J. L. Billoet, Analysis of the mechanical behavior of woven fibrous material using virtual tests at the unit cell level, Journal of Materials Science, vol.59, issue.4, pp.5955-5962, 2005.
DOI : 10.1007/s10853-005-5069-7

P. Boisse, B. Zouari, and J. Daniel, Importance of in-plane shear rigidity in finite element analyses of woven fabric composite preforming, Composites Part A: Applied Science and Manufacturing, vol.37, issue.12, pp.2201-2212, 2006.
DOI : 10.1016/j.compositesa.2005.09.018
URL : https://hal.archives-ouvertes.fr/hal-00378101

H. Borouchaki and A. Cherouat, Une nouvelle approche géométrique pour le drapage de structures composites, Revue des composites et des matériaux avancés, Numéro spécial 'mise en forme des matériaux composites', Hermès, 2003.
DOI : 10.3166/rcma.12.407-421

F. Boust, R. Torres-carrot, and E. Flavin, Le procédé RTM : modélisation et mesure de perméabilité des renforts fibreux, pp.435-445, 2002.

J. Breard, A. Saouab, and G. Bouquet, Numerical simulation of void formation in LCM, Composites Part A: Applied Science and Manufacturing, vol.34, issue.6, pp.517-523, 2003.
DOI : 10.1016/S1359-835X(03)00055-1

]. K. Buet-gautier, Analyse et simulation du comportement mécanique des renforts composites tissés, Thèse de doctorat, 1998.

Z. Cai, Estimation of the permeability of fibrous preforms for resin transfer moulding processes, Composites Manufacturing, vol.3, issue.4, 1992.
DOI : 10.1016/0956-7143(92)90112-8

P. C. Carman, Fluid flow through granular beds, Chemical Engineering Research and Design, vol.75, 1937.
DOI : 10.1016/S0263-8762(97)80003-2

]. P. Celle, Modélisation mécanique et thermo-physico-chimique des procédés d'élaboration par infusion des composites à matrice polymère, 2006.

]. A. Chan, D. E. Larive, and R. J. Morgan, Anisotropic Permeability of Fiber Preforms: Constant Flow Rate Measurement, Journal of Composite Materials, vol.27, issue.10, pp.996-1008, 1993.
DOI : 10.1177/002199839302701003

]. M. Choi, M. H. Lee, J. Chang, and S. J. , Lee : Permeability modeling of fibrous media in composite processing, J. Non-Newtonian Fluid Mech, pp.79-585, 1998.

]. R. Collins, Flow of Fluids Through Porous Materials, 1961.

R. Dave, J. L. Kardos, and M. P. Dudukovic, A model for resin flow during composite processing: Part 1???general mathematical development, Polymer Composites, vol.7, issue.1, 1987.
DOI : 10.1002/pc.750080106

C. Demaria, E. Ruiz, and F. Trochu, In-plane anisotropic permeability characterization of deformed woven fabrics by unidirectional injection. Part I: Experimental results, Polymer Composites, vol.14, issue.6, pp.797-811, 2007.
DOI : 10.1002/pc.20107

]. F. Desplentere, S. Lomov, and I. Verpoest, Influence of the scatter of preform permeability on the mould filling: numerical simulations, 2004.

L. Ding, C. Shih, Z. Liang, C. Zhang, and B. Wang, In situ measurement and monitoring of whole-field permeability profile of fiber preform for liquid composite molding processes, Composites Part A: Applied Science and Manufacturing, vol.34, issue.8, pp.34-779, 2003.
DOI : 10.1016/S1359-835X(03)00121-0

]. F. Dumont, Expérimentation et modèle de comportement de renforts composites tissés, Thèse de doctorat, 2003.

]. F. Dullien, Porous Media: Fluid Transport and Pore Structure, 1979.

C. Peterson and R. S. Parnas, The prediction of permeability for an Epoxy/Eglass Composite Using Optical Coherence Tomographic Images, Polymer Composites, vol.22, pp.803-814, 2001.

]. B. Gebart, P. Gudmundson, L. A. Strömbeck, and C. Y. Lundemo, Analysis of the permeability in RTM reinforcements, Proceedings of the 8 th International Conference on Composite Materials, 1991.

T. G. Gutowski, Z. Cai, S. Bauer, D. Boucher, J. Kingery et al., Consolidation Experiments for Laminate Composites, Journal of Composite Materials, vol.160, issue.6, pp.650-669, 1987.
DOI : 10.1177/002199838702100705

]. A. Hammami, R. Gauvin, and F. Trochu, Modeling the edge effect in liquid composites molding, Composites Part A: Applied Science and Manufacturing, vol.29, issue.5-6, pp.603-609, 1998.
DOI : 10.1016/S1359-835X(97)00120-6

J. Happel and H. Brenner, The Hague, 1983.

]. P. Harrison, M. J. Clifford, and A. C. Long, Shear characterisation of viscous woven textile composites: a comparison between picture frame and bias extension experiments, Composites Science and Technology, vol.64, issue.10-11, pp.1453-1465, 2004.
DOI : 10.1016/j.compscitech.2003.10.015

G. Hivet and P. Boisse, Consistent 3D geometrical model of fabric elementary cell Application to a meshing preprocessor for 3D finite element analysis (2005) Finite Elements in Analysis and Design, pp.25-49

K. Hoes, New set-up for measurement of permeability properties of fibrous reinforcements for RTM (2002) Composites -Part A: Applied Science and Manufacturing, pp.959-969

K. Hoes, D. Dinescu, H. Sol, R. S. Parnas, and S. Lomov, Study of nesting induced scatter of permeability values in layered reinforcement fabrics, Composites Part A: Applied Science and Manufacturing, vol.35, issue.12, pp.35-1407, 2004.
DOI : 10.1016/j.compositesa.2004.05.004

T. Hughes and J. Winget, Finite rotation effects in numerical integration of rate constitutive equations arising in large-deformation analysis, International Journal for Numerical Methods in Engineering, vol.101, issue.12, 1980.
DOI : 10.1002/nme.1620151210

M. Indermaur, P. Simacek, and S. G. Advani, The influence of draping on the filling of dubly curved mods in the resin transfer moldind process, International Journal of Forming Processes, vol.2, pp.3-4321, 1999.

S. K. Kim, J. G. Opperer, and I. M. Daniel, DETERMINATION OF PERMEABILITY OF FIBROUS MEDIUM CONSIDERING INERTIAL EFFECTS, International Communications in Heat and Mass Transfer, vol.29, issue.7, pp.879-885, 2002.
DOI : 10.1016/S0735-1933(02)00408-6

S. K. Kim and I. M. Daniel, Transient gas flow technique for inspection of fiber preforms in resin transfer molding, Composites Part A: Applied Science and Manufacturing, vol.36, issue.12, pp.1694-1699, 2005.
DOI : 10.1016/j.compositesa.2005.03.002

B. Laine, F. Boust, P. Boisse, A. Fanget, S. Lomov et al., Perméabilité des renforts fibreux, écarts modèles numériques expériences: une tentative de conciliation. Revue des composites et matériaux avancée, pp.3-385, 2005.

]. B. Laine, G. Hivet, P. Boisse, F. Boust, S. V. Lomov et al., Permeability of the woven fabrics The development of an integrated process model for liquid composite moulding, Proceedings of, pp.847-854, 1998.

T. S. Lundström, The permeability of non-crimp stitched fabrics, Composites Part A: Applied Science and Manufacturing, vol.31, issue.12, pp.1345-1353, 2000.
DOI : 10.1016/S1359-835X(00)00037-3

T. S. Lundstrom, R. Stenberg, R. Bergstrom, H. Partanen, and P. A. Birkeland, In-plane permeability measurements: a nordic round-robin study, Composites Part A: Applied Science and Manufacturing, vol.31, issue.1, 2000.
DOI : 10.1016/S1359-835X(99)00058-5

C. Mark and H. M. Taylor, The fitting of woven cloth to surfaces, Journal of Textile Institute, vol.47, pp.477-488, 1956.

]. B. Markicevic, D. Heider, S. G. Advani, and S. Walsh, Stochastic modeling of preform heterogeneity to address dry spots formation in the VARTM Process, Composites Part A: Applied Science and Manufacturing, vol.36, issue.6, pp.851-858, 2005.
DOI : 10.1016/j.compositesa.2004.09.002

]. Marsily, Hydrogéologie quantitative, 1981.

]. N. Martys and H. Chen, Simulation of multicomponent fluids in complex three-dimensional geometries by the lattice Boltzmann method, Physical Review E, vol.53, issue.1, pp.743-750, 1996.
DOI : 10.1103/PhysRevE.53.743

]. G. Matheron, Elements pour une th´eorie des milieux poreux, 1967.

R. Mezzenga, L. Boogh, and J. E. Månson, A review of dendritic hyperbranched polymer as modifiers in epoxy composites, Composites Science and Technology, vol.61, issue.5, pp.787-795, 2001.
DOI : 10.1016/S0266-3538(01)00022-7

V. Michaud and A. Mortensen, Infiltration processing of fibre reinforced composites: Governing phenomena (2001) Composites -Part A: Applied Science and Manufacturing, pp.981-996

]. J. Mogavero and S. G. , Experimental investigation of flow through multi-layered preforms, Polymer Composites, vol.12, issue.5, pp.649-655, 1997.
DOI : 10.1002/pc.10316

P. B. Nedanov and S. G. Advani, A Method to Determine 3D Permeability of Fibrous Reinforcements, Journal of Composite Materials, vol.36, issue.2, 2002.
DOI : 10.1177/0021998302036002462

]. N. Ngo and K. K. Tamma, Microscale permeability predictions of porous fibrous media, International Journal of Heat and Mass Transfer, vol.44, issue.16, pp.3135-3145, 2001.
DOI : 10.1016/S0017-9310(00)00335-5

[. Chez, esi-group.com [Papoulis,1991] A. Papoulis, Probability, Random Variables, and Stochastic processes, 3 rd Ed, McGraw Hill Series in Systems Science, N.Y., 583pg, 1991.

R. S. Parnas, A. J. Salem, T. A. Sadiq, H. Wang, and S. G. Advani, The interaction between micro- and macro-scopic flow in RTM preforms, Composite Structures, vol.27, issue.1-2, pp.93-107, 1994.
DOI : 10.1016/0263-8223(94)90071-X

]. R. Pomeroy, S. Grove, J. Summerscales, Y. Wang, and A. , Measurement of permeability of continuous filament mat glass???fibre reinforcements by saturated radial airflow, Composites Part A: Applied Science and Manufacturing, vol.38, issue.5, pp.1439-1443, 2006.
DOI : 10.1016/j.compositesa.2006.11.011

]. K. Potter, History of the resin transfer moulding for aerospace applications, Composites A, pp.757-765, 1999.

T. G. Rogers, Rheological characterization of anisotropic materials, Composites, pp.21-27, 1989.

E. Ruiz, V. Achim, S. Soukane, F. Trochu, and J. Breard, Optimization of injection flow rate to minimize micro/macro-voids formation in resin transfer molded composites, Composites Science and Technology, vol.66, issue.3-4, pp.3-4, 2006.
DOI : 10.1016/j.compscitech.2005.06.013

]. K. Van-rijswijk and H. E. Bersee, Reactive processing of textile fiber-reinforced thermoplastic composites ??? An overview, Composites Part A: Applied Science and Manufacturing, vol.38, issue.3, pp.666-681, 2007.
DOI : 10.1016/j.compositesa.2006.05.007

]. J. Verrey, Resin transfer moulding of complex shaped composites using carbon non-crimp fabrics, 2004.

J. G. Williams, C. E. Morris, and B. C. Ennis, Liquid flow through aligned fiber beds, Polymer Engineering and Science, vol.39, issue.6, pp.413-419, 1974.
DOI : 10.1002/pen.760140603

P. Xue, X. Peng, and J. Cao, A non-orthogonal constitutive model for characterizing woven composites, Composites Part A: Applied Science and Manufacturing, vol.34, issue.2, pp.183-193, 2003.
DOI : 10.1016/S1359-835X(02)00052-0