O. O. Ajibola, Equilibrium Moisture Properties of Winged Bean Seed, Transactions of the ASAE, vol.29, issue.5, p.1485, 1986.
DOI : 10.13031/2013.30341

J. Banaszak and S. J. Kowolski, Theoretical and experimental analysis of stresses and fractures in clay like materials during drying, Chemical Engineering and Processing, vol.44, issue.4, pp.497-503, 2005.
DOI : 10.1016/S0255-2701(04)00169-2

J. Bear and Y. Bachmat, Introduction to modelling of transport phenomena in porous media, 1990.

P. Bernada, Analyse expérimentale et modélisation de la migration de liants dans une couche papetière soumise à flux de séchage, 1995.

M. A. Biot, General Theory of Three???Dimensional Consolidation, Journal of Applied Physics, vol.12, issue.2, pp.155-164, 1941.
DOI : 10.1063/1.1712886
URL : https://hal.archives-ouvertes.fr/hal-01368635

M. A. Biot, Theory of Elasticity and Consolidation for a Porous Anisotropic Solid, Journal of Applied Physics, vol.26, issue.2, pp.182-185, 1955.
DOI : 10.1063/1.1721956
URL : https://hal.archives-ouvertes.fr/hal-01368659

A. W. Bishop, The principle of effective stress, pp.859-863, 1959.

E. Bogdanis, Modélisation des transports de chaleur et de matière lors du séchage d'un milieu élastique ou viscoélastique : résolution par la méthode des éléments finis, Thèse, 2001.

C. Bonazzi, A. Ripoche, and C. Michon, MOISTURE DIFFUSION IN GELATIN SLABS BY MODELING DRYING KINETICS, Drying Technology, vol.14, issue.6-8, pp.2045-2059, 1997.
DOI : 10.1007/BF00396681

N. Boudhrioua, C. Bonazzi, and J. D. Daudin, Estimation of moisture diffusivity in gelatin???starch gels using time-dependent concentration???distance curves at constant temperature, Food Chemistry, vol.82, issue.1, pp.139-149, 2003.
DOI : 10.1016/S0308-8146(02)00542-3

N. Boukadida, B. Nasrallah, and S. , Two Dimensional Heat and Mass Transfer During Convective Drying of Porous Media, Drying Technology, vol.32, issue.3, pp.661-694, 1995.
DOI : 10.1080/07373939108916748

H. J. Brendsen, Specific interactions of water with bio-polymers, Water a Comprehensive Treatise, 1975.

G. E. Caceras, Modélisation du séchage d'un milieu poreux saturé déformable : Prise en compte de la pression de liquide, p.142, 2006.

B. Chausi, Modélisation des phénomènes de transport en milieu déformable diphasique dont une phase est binaire: application à la DII, Thèse, 2000.

S. Chemkhi, F. Zagrouba, and A. Bellagi, Mathematical Model for Drying of Highly Shrinkable Media, Drying Technology, vol.380, issue.5, pp.1023-1039, 2004.
DOI : 10.1081/DRT-100105299

S. Chemkhi and F. Zagrouba, Water diffusion coefficient in clay material from drying data, Desalination, pp.491-498, 2005.

S. Chemkhi, F. Zagrouba, and A. Bellagi, Drying of ceramics. Modelling of the thermohydro elastic behaviour and experiments, Industrial Ceramics, vol.25, issue.3, pp.149-156, 2005.

J. M. Collard, Etude des transferts d'humidité et des déformations pendant le séchage d'une plaque d'argile, Thèse, 1989.

O. Coussy and P. Dangla, Approche énergétique du comportement des sols non saturés, dans « Mécanique des sols non saturés », sous la direction de Coussy O, et Fleureau J.M, pp.137-174, 2002.

F. Couture, Modélisation fine d'un problème de séchage : développement d'outils adaptés, Thèse, 1995.

F. Couture, M. Roques, and E. Bogdanis, Towards thermo-hydro-rheology, Proceeding of the Second Inter-American Drying Conference, pp.91-105, 2001.

F. Couture, S. Laurent, and M. Roques, Drying of two-phase media: Simulation with liquid pressure as driven force, AIChE Journal, vol.15, issue.7, pp.1703-1717, 2007.
DOI : 10.1002/aic.11213

J. Crank, The mathematics of diffusion, 1975.

M. Goyeneche, Etude du transport d'humidité par écoulement de film lors du séchage d'un milieu capillaro-poreux, Thèse, 2001.

W. G. Gray, A derivation of the equations for multi-phase transport, Chemical Engineering Science, vol.30, issue.2, pp.229-233, 1975.
DOI : 10.1016/0009-2509(75)80010-8

E. A. Guggenheim, Applications of statistical mechanics, 1966.

K. Haghighi and L. J. Segerlind, Modeling simultaneous heat and mass transfer in an isotropic sphere: A finite element approach, Transaction of the ASAE, pp.629-637, 1988.

M. Hasatani, Y. Itaya, and K. Hayakawa, Fundamental study on shrinkage of formed clay during drying: viscoelastic strain-stress and heat moisture transfer, Drying technology, pp.1013-1036, 1992.

M. Hasatani and Y. Et-itaya, Drying-Induced Strain and Stress: A Review, Drying Technology, vol.11, issue.5, pp.1011-1040, 1996.
DOI : 10.1080/07373939508916974

J. Hawkes and J. M. Flink, OSMOTIC CONCENTRATION OF FRUIT SLICES PRIOR TO FREEZE DEHYDRATION, Journal of Food Processing and Preservation, vol.8, issue.7, pp.265-284, 1978.
DOI : 10.1021/jf60202a018

M. Ilic and I. W. Turner, Convective drying of a consolidated slab of wet porous material, International Journal of Heat and Mass Transfer, vol.32, issue.12, pp.2351-2362, 1989.
DOI : 10.1016/0017-9310(89)90196-8

Y. Itaya, S. Mabuchi, and M. Hasatani, Deformation behaviour of ceramic slabs by non uniform drying, Drying Technology, pp.801-819, 1995.

Y. Itaya, K. Okouchi, and S. Mori, EFFECT OF HEATING MODES ON INTERNAL STRAIN???STRESS FORMATION DURING DRYING OF MOLDED CERAMICS, Drying Technology, vol.19, issue.7, pp.1491-1504, 2001.
DOI : 10.1080/07373939208916444

W. Jomaa, Séchage des matériaux fortement déformables : prise en compte de la vitesse de retrait, Thèse, 1991.

W. Jomaa and J. R. Puiggali, Drying of shrinking materials: modelling with shrinkage velocity, Drying Technology, pp.1271-1293, 1991.

A. A. Katelaars, DRYING DEFORMABLE MEDIA KINETICS, SHRINKAGE AND STRESSES, Drying Technology, vol.12, issue.4, 1992.
DOI : 10.1080/07373939408960008

A. A. Katelaars, L. Pel, W. J. Coumans, and P. J. Kerkhof, Drying kinetics: A comparison of diffusion coefficients from moisture concentration profiles and drying curves, Chemical Engineering Science, vol.50, issue.7, pp.1187-1191, 1995.
DOI : 10.1016/0009-2509(94)00494-C

N. Kechaou and M. Roques, A variable diffusivity model for drying of highly deformable materials, Drying'89, pp.332-338, 1989.

. N. Kechaou, Séchage de gels fortement déformables : étude de la diffusion interne de l'eau et modélisation, Thèse, Institut National Polytechnique de Lorraine, 1989.

S. J. Kowalski, THERMOMECHANICAL APPROACH TO SHRINKING AND CRACKING PHENOMENA IN DRYING, Drying Technology, vol.41, issue.5, pp.731-765, 2001.
DOI : 10.1080/07373939608917098

B. Kroes, The influence of material properties on drying kinetics, 1999.

J. B. Laurindo and M. Et-prat, Numerical and experimental network study of evaporation in capillary porous media. Drying rates, Chemical Engineering Science, vol.53, issue.12, pp.2257-2269, 1998.
DOI : 10.1016/S0009-2509(97)00348-5

A. Leonard, Etude du séchage convectif de boues de station d'épuration : Suivi de la texture par microtomographie à rayon X, Thèse, 2003.

P. S. Madamba, R. H. Driscoll, and K. A. Buckle, Predicting the sorption behaviour of garlic slices, Drying Technology, pp.669-683, 1994.

C. Marle, Ecoulements monophasiques en milieux poreux, Revue de l'Institut Français de Pétrole, pp.1471-1509, 1967.

F. Mercier, Séchage de gel d'alumine: Maîtrise de la texture de supports de catalyseurs, Thèse, 1996.

F. Mercier, F. Kolenda, and J. R. Et-puiggali, Influence of the mechanical behavior law on the drying of an alumina gel, Chemical Engineering Journal, vol.86, issue.1-2, pp.95-101, 2002.
DOI : 10.1016/S1385-8947(01)00277-7

D. Michel, M. Quintard, and J. R. Puiggali, Experimental and numerical study of pine wood drying at low temperature, Drying'87, pp.185-194, 1987.

D. Mihoubi, Déshydratation d'argiles par compression et séchage: aspects de modélisation et de simulation, 2004.

D. Mihoubi, F. Zagrouba, J. Vaxelaire, A. Bellagi, and M. Roques, Transfer phenomena during the drying of a shrinkable product: modeling and simulation, Drying Technology, pp.91-109, 2004.

A. Modaressi and J. J. Fry, Barrages et remblais, dans « Mécanique des sols non saturés », sous la direction de Coussy O, et Fleureau J.M, pp.275-348, 2002.

C. Moyne, Transferts couplés chaleur-masse lors du séchage : prise en compte du mouvement de la phase gazeuse, Thèse d'Etat, 1987.

I. Mrani, J. C. Bénet, and J. Fras, Transport of Water in a Biconstituent Elastic Medium, Applied Mechanics Reviews, vol.48, issue.10, pp.717-721, 1995.
DOI : 10.1115/1.3005053

I. Mrani, J. C. Bénet, J. Fras, and Z. Zrikem, TWO DIMENSIONAL SIMULATION OF DEHYDRATION OF A HIGHLY DEFORMABLEGEL : MOISTURE CONTENT, STRESS AND STRAW FIELDS, Drying Technology, vol.43, issue.9, pp.2165-2193, 1997.
DOI : 10.1080/07373939508916974

J. P. Nadeau and J. R. Et-puiggali, Séchage: des processus physiques aux procédés industriels, Lavoisier Tech. et Doc, 1995.

P. Perré, Le séchage convectif d'un bois résineux : Choix validation et utilisation d'un modèle, Thèse, 1987.

P. Perré and A. Degiovanni, Simulation par volumes finis des transferts coupl??s en milieux poreux anisotropes: s??chage du bois ?? basse et ?? haute temp??rature, International Journal of Heat and Mass Transfer, vol.33, issue.11, pp.2463-2478, 1990.
DOI : 10.1016/0017-9310(90)90004-E

P. Perré and J. Passard, A Control-Volume procedure compared with the Finite-Element method for calculating Stress and Strain during Wood Drying, Drying Technology, vol.1, issue.3, pp.635-660, 1995.
DOI : 10.1007/BF02663286

O. A. Plumb, C. A. Brown, and B. A. Olmstead, Experimental measurements of heat and mass transfer during convective drying of southern pine, Wood Science and Technology, vol.13, issue.3, pp.187-204, 1984.
DOI : 10.1007/BF00367533

O. A. Plumb and M. Prat, Microscopic models for the study of drying of capillary porous media, Drying'92, pp.397-406, 1992.

G. O. Porras, Modélisation des phénomènes de transports en milieu diphasique (solideliquide binaire) : Simulation 2D du séchage convectif, Thèse, 2005.

F. Pourcel, Séchage de gel d'alumine: mise en évidence et définition d'un critère de fissuration, 2003.

M. Prat, Recent advances in pore-scale models for drying of porous media, Chemical Engineering Journal, vol.86, issue.1-2, pp.153-164, 2002.
DOI : 10.1016/S1385-8947(01)00283-2

J. R. Puiggali and M. Quintard, Properties and simplifying assumptions for classical drying models, Advances in Drying, vol.5, pp.109-143, 1992.

M. Quintard and S. Whitaker, Transport in ordered and disordered porous media: volume-averaged equations, closure problems, and comparison with experiment, Chemical Engineering Science, vol.48, issue.14, pp.2537-2564, 1993.
DOI : 10.1016/0009-2509(93)80266-S

A. L. Sarmento, Modélisation des phénomènes de transports en milieu déformable diphasique : prise en compte de la pression de la phase liquide, Thèse, 2004.

A. W. Scheidegger, The Physics of Flow Through Porous Media, Soil Science, vol.86, issue.6, 1974.
DOI : 10.1097/00010694-195812000-00015

G. W. Scherer, Theory of Drying, Journal of the American Ceramic Society, vol.24, issue.9, pp.3-14, 1990.
DOI : 10.1063/1.338285

J. C. Slattery, Flow in viscoelastic fluids through porous media, AIChE Journal, vol.13, pp.420-427, 1967.

K. Terzaghi, Theoretical soil mechanics, 1943.
DOI : 10.1002/9780470172766

E. D. Tsami, D. Marounis-kouris, and Z. B. Maroulis, Water Sorption Isotherms of Raisins, Currants, Figs, Prunes and Apricots, Journal of Food Science, vol.3, issue.6, pp.1594-1597, 1990.
DOI : 10.1021/jf60183a021

I. W. Turner, The modelling of combined microwave and convective drying of a wet porous material, Thèse, 1991.

I. W. Turner and P. Perré, A comparison of the drying simulation codes TRANSPORE and WOOD2D which are used for the modelling of two-dimensional wood drying processes, Drying Technology, vol.13, issue.3, pp.695-735, 1995.

J. C. Verbrugge and J. M. Fleureau, Bases expérimentales du comportement des sols non saturés, dans « Mécanique des sols non saturés », sous la direction de Coussy O, et Fleureau J.M, pp.69-112, 2002.

R. I. Wakeman and A. Vince, Kinetics of gravity drainage from porous media, Chemical Engineering Research and Design, vol.64, issue.2, pp.94-103, 1986.

S. Whitaker, Diffusion and dispersion in porous media, AIChE Journal, vol.13, issue.3, pp.420-427, 1967.
DOI : 10.1002/aic.690130308

S. Whitaker, Simultaneous Heat, Mass, and Momentum Transfer in Porous Media: A Theory of Drying, Adv. Heat Transfer, vol.13, pp.119-203, 1977.
DOI : 10.1016/S0065-2717(08)70223-5

S. Whitaker, Toward a Diffusion Theory of Drying, Industrial & Engineering Chemistry Fundamentals, vol.16, issue.4, pp.408-414, 1977.
DOI : 10.1021/i160064a003

S. Whitaker, Heat and mass transfer in granular porous media, Advance in Drying, vol.1, pp.23-61, 1980.

S. Whitaker, Flow in porous media II: The governing equations for immiscible, two-phase flow, Transport in Porous Media, pp.105-125, 1986.
DOI : 10.1007/BF00714688

S. Whitaker, Mass transport and reaction in catalyst pellets, Transport in Porous Media, pp.269-299, 1987.
DOI : 10.1007/BF00165785

S. Whitaker, The method of volume averaging: Theory and application of transport in porous media, 1999.
DOI : 10.1007/978-94-017-3389-2

M. Younis, Séchage et déposition dans un milieu multiphasique multicomposant : Une approche expérimentale et de modélisation, 1999.

F. Zagrouba, Séchage mixte par convection et un apport rayonnant micro-onde des milieux déformables. Modélisation des phénomènes de transferts de chaleur et de matière, Thèse, Institut National Polytechnique de Lorraine, 1993.

F. Zagrouba, D. Mihoubi, and A. Bellagi, Drying of clay. II. Rheological modelisation and simulation of physical phenomena, Drying Technology, pp.1895-1917, 2002.