J. S. Stewart and R. Hogan, Costerton Antibiotic resistance of bacteria in biofilms Kolter Why are bacteria refractory to antimicrobials?, Lancet Current Opinion in Microbiology, vol.358, issue.5, pp.135-138, 2001.

H. Suga and K. M. , Molecular mechanisms of bacterial quorum sensing as a new drug target, Current Opinion in Chemical Biology, vol.7, issue.5, pp.586-591, 2003.
DOI : 10.1016/j.cbpa.2003.08.001

J. M. Henke and B. L. , Bacterial social engagements, Trends in Cell Biology, vol.14, issue.11, pp.648-656, 2004.
DOI : 10.1016/j.tcb.2004.09.012

T. Hjelmgaard, T. B. Persson, M. Rasmussen, and J. Givskov, Nielsen Synthesis of furanone-based natural product analogues with quorum sensing antagonist activity, Bioorganic and Medicinal Chemistry, issue.11, pp.3261-3271, 2003.

S. P. Massia, J. Stark, and D. S. , Surface-immobilized dextran limits cell adhesion and spreading, Biomaterials, vol.21, issue.22, pp.2253-2261, 2000.
DOI : 10.1016/S0142-9612(00)00151-4

S. Dong, E. B. Manolache, A. C. Somers, and F. S. Lee-wong, Generation of antifouling layers on stainless steel surfaces by plasma-enhanced crosslinking of polyethylene glycol, Journal of Applied Polymer Science, vol.32, issue.2, pp.485-497, 2005.
DOI : 10.1002/app.21766

D. S. Balakrishnan, Y. Kumar, and A. Yoshida, Jayakrishnan Chemical modification of poly(vinyl chloride) resin using poly(ethylene glycol) to improve blood compatibility, Biomaterials, vol.23, pp.3495-3502, 2005.

P. Wang, K. L. Tan, E. T. Kang, and K. G. , Plasma-induced immobilization of poly(ethylene glycol) onto poly(vinylidene fluoride) microporous membrane, Journal of Membrane Science, vol.195, issue.1, pp.103-114, 2002.
DOI : 10.1016/S0376-7388(01)00548-8

F. Nie, Z. Xu, P. Ye, J. Wu, and P. , Acrylonitrile-based copolymer membranes containing reactive groups: effects of surface-immobilized poly(ethylene glycol)s on anti-fouling properties and blood compatibility, Polymer, vol.45, issue.2, pp.399-407, 2004.
DOI : 10.1016/j.polymer.2003.11.007

M. Malmsten, K. Emoto, and J. M. , Effect of Chain Density on Inhibition of Protein Adsorption by Poly(ethylene glycol) Based Coatings, Journal of Colloid and Interface Science, vol.202, issue.2, pp.507-517, 1998.
DOI : 10.1006/jcis.1998.5513

D. H. Atha and K. C. , Ingham Mechanism of precipitation of proteins by polyethylene glycols Analysis in terms of excluded volume, Journal of biological Chemistry, vol.256, pp.12108-12117, 1981.

D. Knoll, J. L. Prime, and G. M. , Hermans Polymer-protein interactions. Comparison of experiment and excluded volume theory Whitesides Adsorption of proteins onto surfaces containing end-attached oligo(ethylene oxide): a model system using self-assembled monolayers, Journal of biological Chemistry Journal of the American Chemical Society, vol.258, issue.115, pp.5710-5715, 1983.

S. Tan, D. E. Butterfield, C. L. Voycheck, K. D. Caldwell, and J. , Li Surface modification of nanoparticles by PEO/PPO block copolymers to minimize interactions with blood components and prolong blood circulation in rats Gingell, N. Owens Inhibition of platelet spreading from plasma onto glass by an adsorbed layer of a novel fluorescent-labeled poly(ethylene oxide)/poly(butylene oxide) block copolymer: Characteristics of the exclusion zone probed by means of polystyrene beads and macromolecules, Biomaterials Journal of Biomedical Materials Research, vol.14, issue.28, p.491, 1993.

S. Rajam and C. , Ho Graft coupling of PEO to mixed cellulose esters microfiltration membranes by UV irradiation, Journal of Membrane Science, pp.281-211, 2006.

A. Kidane, T. Mcpherson, H. S. Shim, and K. , Surface modification of polyethylene terephthalate using PEO-polybutadiene-PEO triblock copolymers, Colloids and Surfaces B: Biointerfaces, vol.18, issue.3-4, pp.347-353, 2000.
DOI : 10.1016/S0927-7765(99)00160-5

J. Chen, G. Wei, Y. Maekawa, M. Yoshida, and N. , Grafting of poly(ethylene-block-ethylene oxide) onto a vapor grown carbon fiber surface by ??-ray radiation grafting, Polymer, vol.44, issue.11, pp.3201-3207, 2003.
DOI : 10.1016/S0032-3861(03)00274-X

I. J. Kim, M. W. Kang, and S. Huh, Surface characterization and in vitro blood compatibility of poly(ethylene terephthalate) immobilized with insulin and/or heparin using plasma glow discharge, Biomaterials, vol.21, issue.2, pp.121-130, 2000.
DOI : 10.1016/S0142-9612(99)00137-4

P. Kingshott, H. Thissen, and H. J. Griesser, Effects of cloud-point grafting, chain length, and density of PEG layers on competitive adsorption of ocular proteins, Biomaterials, vol.23, issue.9, pp.2043-2056, 2002.
DOI : 10.1016/S0142-9612(01)00334-9

P. Lopez, B. D. Ratner, C. D. Tidwell, C. L. Haycox, R. J. Rapoza et al., Glow discharge plasma deposition of tetraethylene glycol dimethyl ether for fouling-resistant biomaterial surfaces, Journal of Biomedical Materials Research, vol.24, issue.4, pp.415-439, 1992.
DOI : 10.1002/jbm.820260402

G. P. Lopez and B. , Ratner Molecular adsorption and the chemistry of plasma-deposited thin organic films: deposition of oligomers of ethylene glycol. Plasmas and Polymers, pp.127-151, 1996.

E. Sardella, R. Gristina, G. S. Senesi, R. Agostino, and P. , Homogeneous and Micro-Patterned Plasma-Deposited PEO-Like Coatings for Biomedical Surfaces, Plasma Processes and Polymers, vol.1, issue.1, pp.63-72, 2004.
DOI : 10.1002/ppap.200400013

L. Senesi, P. Detomaso, and R. Favia, Agostino Control of cell adhesion and spreading by spatial microarranged PEO-like and pdAA domains, Surface and Coatings Technology, vol.200, pp.51-57, 2005.

Y. V. Hanein, B. D. Pan, D. D. Ratner, and K. F. Denton, Micromachining of non-fouling coatings for bio-MEMS applications, Sensors and Actuators B: Chemical, vol.81, issue.1, pp.49-54, 2001.
DOI : 10.1016/S0925-4005(01)00925-X

L. Brétagnol, M. Ceriotti, A. Lejeune, M. Papadopoulou-bouraoui, D. Hasiwa et al., Rossi Functional micropatterned surfaces by combination of plasma polymerization and lift-off processes. Plasma processes and polymers, pp.30-38, 2006.

L. Chu, W. Knoll, and R. , Pulsed Plasma Polymerized Di(ethylene glycol) Monovinyl Ether Coatings for Nonfouling Surfaces, Chemistry of Materials, vol.18, issue.20, pp.4840-4844, 2006.
DOI : 10.1021/cm061217g

A. Brétagnol, G. Valsesia, P. Ceccone, D. Colpo, L. Gilliland et al., Surface Functionalization and Patterning Techniques to Design Interfaces for Biomedical and Biosensor Applications, Plasma Processes and Polymers, vol.538, issue.4, pp.443-455, 2006.
DOI : 10.1002/ppap.200600015

R. Denes, E. B. Somers, A. C. Wong, and F. , 12-crown-4-ether and tri(ethylene glycol) dimethyl-ether plasma-coated stainless steel surfaces and their ability to reduce bacterial biofilm deposition, Journal of Applied Polymer Science, vol.9, issue.14, pp.3425-3438, 2001.
DOI : 10.1002/app.1799

E. B. Wang, S. Somers, E. S. Manolache, and A. C. Denes, Cold Plasma Synthesis of Poly(ethylene glycol)-like Layers on Stainless-Steel Surfaces to Reduce Attachment and Biofilm Formation by Listeria monocytogenes, Journal of Food Science, vol.19, issue.9, pp.2772-2779, 2003.
DOI : 10.1016/0168-1605(94)90047-7

M. Rousseau, D. Benmansour, and J. Morvan, Purification of MG silicon by thermal plasma process coupled to DC bias of the liquid bath, Solar Energy Materials and Solar Cells, vol.91, issue.20, pp.1906-1915, 2007.
DOI : 10.1016/j.solmat.2007.07.010

C. Jardin, C. G. Bathke, D. A. Ehst, S. M. Kaye, C. E. Kessel-jr et al., Physics basis for a tokamak fusion power plant, Fusion Engineering and Design, vol.48, issue.3-4, pp.281-298, 2000.
DOI : 10.1016/S0920-3796(00)00166-6

P. A. Kruglenya and O. , Advanced structure of cathode for gas discharge lamp of super high pressure, Applied Surface Science, vol.215, issue.1-4, pp.101-104, 2003.
DOI : 10.1016/S0169-4332(03)00313-1

H. Oyama, N. Sun, and G. K. , Shiramatsu Smaller and bigger displays Stylios Fabric surface properties affected by low temperature plasma treatment, Displays Journal of Materials Processing Technology, vol.23, issue.173, pp.31-39, 2002.

M. Jafari, W. Tatoulian, and F. Morscheidt, Arefi-Khonsari Stable plasma polymerized acrylic acid coating deposited on polyethylene (PE) films in a low frequency discharge

S. Y. Park, B. R. Deshwal, and S. H. , NOx removal from the flue gas of oil-fired boiler using a multistage plasma-catalyst hybrid system, Fuel Processing Technology, vol.89, issue.5, pp.540-548, 2008.
DOI : 10.1016/j.fuproc.2007.10.002

S. Rousseau, M. Awamat, D. Nikravech, and J. Morvan, Deposit of dense YSZ electrolyte and porous NiO???YSZ anode for SOFC device by a low pressure plasma process, Surface and Coatings Technology, vol.202, issue.4-7, pp.1226-1230, 2007.
DOI : 10.1016/j.surfcoat.2007.07.089

A. Brysbaert, K. Melessanaki, and D. , Anglos Pigment analysis in Bronze Age Aegean and Eastern Mediterranean painted plaster by laserinduced breakdown spectroscopy (LIBS)

J. Moisan, S. Barbeau, J. Moreau, M. Pelletier, and L. Tabrizian, Low-temperature sterilization using gas plasmas: a review of the experiments and an analysis of the inactivation mechanisms, International Journal of Pharmaceutics, vol.226, issue.1-2, pp.1-21, 2001.
DOI : 10.1016/S0378-5173(01)00752-9

P. W. Kramer, Y. Yeh, and H. , Low temperature plasma for the preparation of separation membranes, Journal of Membrane Science, vol.46, issue.1, pp.1-28, 1989.
DOI : 10.1016/S0376-7388(00)81167-9

T. Belmonte, T. Czerwiec, and H. , Michel Fundamentals and applications of late post-discharge processes 306-313 .S. Denes and S. Manolache Macromolecular plasma-chemistry: an emerging field of polymer science, Progress in Polymer Science, pp.142-144, 2001.

H. Yasuda, M. O. Bumgarner, J. Hillmanj, and R. D. Ward, Polymerization of organic compounds in an electrodeless glow discharge. V. Amines and nitriles, Journal of Applied Polymer Science, vol.19, issue.5, pp.1403-1408, 1975.
DOI : 10.1002/app.1975.070190520

A. M. Mahajan, L. S. Patil, and D. K. , Gautam Influence of process parameters on the properties of TEOS?PECVD-grown SiO2 films, Surface and Coatings Technology, pp.188-189, 2004.

M. Beers, H. T. Hintzen, H. G. Schaeken, and J. , CVD silicon structures formed by amorphous and crystalline growth, Journal of Crystal Growth, vol.64, issue.3, pp.563-571, 1983.
DOI : 10.1016/0022-0248(83)90342-1

T. Ivanova, K. A. Gesheva, G. Popkirov, M. Ganchev, and E. , Electrochromic properties of atmospheric CVD MoO3 and MoO3???WO3 films and their application in electrochromic devices, Materials Science and Engineering: B, vol.119, issue.3, pp.232-239, 2005.
DOI : 10.1016/j.mseb.2004.12.084

K. Perez-mariano, A. Lau, J. Sanjurjo, J. M. Caro, and C. Prado, Multilayer coatings by chemical vapor deposition in a fluidized bed reactor at atmospheric pressure (AP/FBR-CVD): TiN/TaN and TiN/W, Surface and Coatings Technology, vol.201, issue.6, pp.2174-2180, 2006.
DOI : 10.1016/j.surfcoat.2006.03.021

Y. Korotkov, R. Gupta, P. Ricou, and R. Smith, Atmospheric plasma discharge chemical vapor deposition of SnOx thin films using various tin precursors, Thin Solid Films, vol.516, issue.15, pp.4720-4727, 2008.
DOI : 10.1016/j.tsf.2007.08.074

M. Tatoulian, F. Arefi-khonsari, and J. , Deposition of Organic Coatings at Atmospheric Pressure from Liquid Precursors, Plasma Processes and Polymers, vol.31, issue.175, pp.360-369, 2007.
DOI : 10.1002/ppap.200600187

J. Ward, W. C. Scofield, J. P. Badyal, A. J. Goodwin, and P. J. Merlin, Atmospheric Pressure Plasma Deposition of Structurally Well-Defined Polyacrylic Acid Films, Chemistry of Materials, vol.15, issue.7, pp.1466-1469, 2003.
DOI : 10.1021/cm020289e

J. Ward, W. C. Scofield, J. P. Badyal, A. J. Goodwin, and P. J. , Films, Langmuir, vol.19, issue.6, pp.2110-2114, 2003.
DOI : 10.1021/la0204287
URL : https://hal.archives-ouvertes.fr/hal-00941354

J. Wang, Chen Studies on surface graft polymerization of acrylic acid onto PTFE film by remote argon plasma initiation, Applied Surface Science, vol.253, pp.4709-4714, 2007.

E. Kato, E. Uchida, Y. Kang, and Y. Uyama, Polymer surface with graft chains, Progress in Polymer Science, vol.28, issue.2, pp.209-259, 2003.
DOI : 10.1016/S0079-6700(02)00032-1

H. Vii-int and . Symp, On High Pressure Low Temperature Plasma Chemistry, 2000.

D. B. Kim, J. K. Rhee, S. Y. Moon, and W. , Feasibility study of material surface modification by millimeter size plasmas produced in a pin to plane electrode configuration, Thin Solid Films, vol.515, issue.12, pp.4913-4917, 2007.
DOI : 10.1016/j.tsf.2006.10.069

E. Francke, S. Robert, and J. , Amouroux Hydrodynamic and electrical characterization of a corona discharge plasma reactor, Journal of High Temperature Material Processes, vol.4, pp.139-150, 1999.

K. Yan, S. Kanazawa, T. Ohkubo, and Y. , Nomoto Oxidation and reduction processes during NOx removal with corona induced non-thermal plasma, Plasma Chemical and Plasma Processes, pp.421-443, 1999.

A. Muaffaq, K. Takaki, and T. , Fujiwara Low-voltage operation of a plasma reactor for exhaust gas treatment by dielectric barrier discharge, Review of Scientific Instruments, vol.69, pp.1847-1849, 1998.

L. Odic, A. Parissi, M. Goldman, and J. Goldman, Amouroux Depollution processes correlated to temperature control in non equilibrium plasmas. Application to VOC removal, Journal of High Temperature Material Processes, 1998.

K. Takaki, M. A. Jani, and T. , Removal of nitric oxide in flue gases by multi-point to plane dielectric barrier discharge, IEEE Transactions on Plasma Science, vol.27, issue.4, pp.1137-1145, 1999.
DOI : 10.1109/27.782294

K. Toda, K. Takaki, S. Kato, and T. , using a multipoint-type dielectric barrier discharge at a narrow gap, Journal of Physics D: Applied Physics, vol.34, issue.13, pp.2032-2036, 2001.
DOI : 10.1088/0022-3727/34/13/314

W. Rogers, J. A. Nejezchleb, C. William, I. J. Newhouse, S. P. Federle et al., Littrell The removal of Nitric Oxide using a Non, Thermal Plasma Discharge Device. 2 nd International Conference on Advanced Oxidation Technologies, pp.152-164, 1996.

M. Tas, R. Van-hardeveld, and E. M. , Van Veldhuizen Reactions of NO in a positive Streamer Corona Plasma, Plasma Chemistry and Plasma Processing, vol.17, issue.4, pp.371-391, 1997.
DOI : 10.1023/A:1021818313047

B. Zhang and . Eliasson, Hydrocarbons over Zeolite HY Promoted by a Dielectric-Barrier Discharge, Industrial & Engineering Chemistry Research, vol.41, issue.6, pp.1462-1468, 2002.
DOI : 10.1021/ie0105021

T. Murata, M. Tatcukawa, Y. Okita, and K. , Polarity Effect Of Silent Discharge, Ozone: Science & Engineering, vol.7, issue.3, pp.575-586, 1995.
DOI : 10.1088/0022-3727/20/11/010

-. Wagner, R. Brandenburg, K. V. Kozlov, A. Sonnenfeld, P. Michel et al., Behnke The barrier discharge: basic properties and applications to surface treatment, Vacuum, pp.71-417, 2003.

V. I. Gibalov and G. J. , The development of dielectric barrier discharges in gas gaps and on surfaces, Journal of Physics D: Applied Physics, vol.33, issue.20, pp.2618-2636, 2000.
DOI : 10.1088/0022-3727/33/20/315

B. Eliasson, M. Hirth, and U. , Ozone synthesis from oxygen in dielectric barrier discharges, Journal of Physics D: Applied Physics, vol.20, issue.11, pp.1421-1437, 1987.
DOI : 10.1088/0022-3727/20/11/010

N. De-geyter, R. Morent, and C. , Surface modification of a polyester non-woven with a dielectric barrier discharge in air at medium pressure, Surface and Coatings Technology, vol.201, issue.6, pp.2460-2466, 2006.
DOI : 10.1016/j.surfcoat.2006.04.004

C. Esena, S. Riccardi, M. Zanini, G. Tontini, and F. Poletti, Orsini Surface modification of PET film by a DBD device at atmospheric pressure, Surface and Coatings Technology, pp.664-667, 0200.

G. Borcia, N. M. Brown, D. Dixon, and R. , The effect of an air-dielectric barrier discharge on the surface properties and peel strength of medical packaging materials, Surface and Coatings Technology, vol.179, issue.1, pp.70-77, 2004.
DOI : 10.1016/S0257-8972(03)00798-9

J. Lei and X. , Xiao Surface graft copolymerization of acrylic acid onto LDPE film through corona discharge

L. Zhu, B. Zhu, L. Xu, Y. Feng, and F. Liu, Xu Corona-induced graft polymerization for surface modification of porous polyethersulfone membranes

E. Njatawidjaja, M. Kodama, K. Matsuzaki, K. Yasuda, T. Matsuda et al., Hydrophilic modification of expanded polytetrafluoroethylene (ePTFE) by atmospheric pressure glow discharge (APG) treatment, Surface and Coatings Technology, vol.201, issue.3-4, pp.699-706, 2006.
DOI : 10.1016/j.surfcoat.2005.12.017

J. Lei, M. Shi, and J. , Zhang Surface graft copolymerization of hydrogen silicone fluid onto fabric through corona discharge and water repellency of grafted fabric

S. Park and J. , Effect of Corona Discharge Treatment on the Dyeability of Low-Density Polyethylene Film, Journal of Colloid and Interface Science, vol.236, issue.1, pp.155-160, 2001.
DOI : 10.1006/jcis.2000.7380

-. S. Choi, Y. Kim, Y. Zhang, S. Tang, S. Myung et al., Plasma-induced graft co-polymerization of acrylic acid onto the polyurethane surface, Surface and Coatings Technology, vol.182, issue.1, pp.55-64, 2004.
DOI : 10.1016/S0257-8972(03)00880-6

W. Lu, C. Huang, and M. , Effect of plasma treatment on the degree of AAm grafting for high-density polyethylene, Surface and Coatings Technology, vol.172, issue.2-3, pp.251-261, 2003.
DOI : 10.1016/S0257-8972(03)00337-2

C. S. Ren, D. Z. Wang, and Y. N. , Graft co-polymerization of acrylic acid onto the linen surface induced by DBD in air, Surface and Coatings Technology, vol.201, issue.6, pp.2867-2870, 2006.
DOI : 10.1016/j.surfcoat.2006.05.039

M. Tatoulian, F. Arefi-khonsari, L. Tatoulian, J. Amouroux, and J. , Deposition of Poly(acrylic acid) Films by Electrohydrodynamic Atomization in Postdischarge at Atmospheric Pressure in Air, Chemistry of Materials, vol.18, issue.25, pp.5860-5863, 2006.
DOI : 10.1021/cm060066e

J. M. Grace and J. C. , A review of liquid atomization by electrical means, Journal of Aerosol Science, vol.25, issue.6, pp.1005-1019, 1994.
DOI : 10.1016/0021-8502(94)90198-8

T. Références-bibliographiques-1, T. Belmonte, and H. Czerwiec, Michel Fundamentals and applications of late post-discharge processes, Surface and Coatings Technology, pp.142-144, 2001.

J. P. Massia and D. S. Stark, Surface-immobilized dextran limits cell adhesion and spreading, Biomaterials, vol.21, issue.22, pp.2253-2261, 2000.
DOI : 10.1016/S0142-9612(00)00151-4

K. L. Wang, E. T. Tan, and K. G. Kang, Plasma-induced immobilization of poly(ethylene glycol) onto poly(vinylidene fluoride) microporous membrane, Journal of Membrane Science, vol.195, issue.1, pp.103-114, 2002.
DOI : 10.1016/S0376-7388(01)00548-8

V. Pan, Y. Hanein, D. Leach-scampavia, K. F. Böhringer, B. D. Ratner et al., Denton A precision technology for controlling protein adsorption and cell adhesion in bioMEMS, IEEE conference on MicroElectro Mechanical Systems, pp.21-25, 2001.

E. B. Wang, S. Somers, E. S. Manolache, and A. C. Denes, Wong Cold plasma synthesis of poly(ethylene glycol)-like layers on stainless-steel surfaces to reduce attachment and biofilm formation by Listeria monocytogenes, Journal of Food Science, pp.68-77, 2003.

M. Bretagnol, A. Lejeune, M. Papadopoulou-bouraoui, H. Hasiwa, G. Rauscher et al., Rossi Fouling and non-fouling surfaces produced by plasma polymerization of ethylene oxide monomer

E. E. Johnston, J. D. Bryers, and B. D. , Plasma Deposition and Surface Characterization of Oligoglyme, Dioxane, and Crown Ether Nonfouling Films, Langmuir, vol.21, issue.3, pp.870-881, 2005.
DOI : 10.1021/la036274s

L. Brétagnol, M. Ceriotti, A. Lejeune, M. Papadopoulou-bouraoui, D. Hasiwa et al., Functional Micropatterned Surfaces by Combination of Plasma Polymerization and Lift-Off Processes, Plasma Processes and Polymers, vol.71, issue.1, pp.30-38, 2006.
DOI : 10.1002/ppap.200500071

J. Ademovic, B. Wei, X. Winther-jensen, and P. Hou, Kingshott Surface modification of PET films using pulsed AC plasma polymerisation aimed at preventing protein adsorption, Plasma Processes and Polymers, issue.2, pp.53-63, 2005.

Z. Zhang, B. Menges, R. B. Timmons, W. Knoll, and R. , Förch Surface plasmon resonance studies of protein binding on plasma polymerized di(ethylene glycol) monovinyl ether films

S. Kingshott, H. Mcarthur, D. G. Thissen, and H. J. Castner, Ultrasensitive probing of the protein resistance of PEG surfaces by secondary ion mass spectrometry, Biomaterials, vol.23, issue.24, pp.4775-4785, 2002.
DOI : 10.1016/S0142-9612(02)00228-4

M. Silván, A. Valesia, D. Gilliland, G. Ceccone, and F. , An evaluation of poly(ethylene-glycol) films stabilized by plasma and ion beam methods, Applied Surface Science, vol.235, issue.1-2, pp.119-125, 2004.
DOI : 10.1016/j.apsusc.2004.05.138

H. Kurosawa, J. Aizawa, M. Miyake, J. Yoshimoto, and Z. Hilborn, Detection of deposition rate of plasma-polymerized silicon-containing films by quartz crystal microbalance, Thin Solid Films, vol.407, issue.1-2, pp.1-6, 2002.
DOI : 10.1016/S0040-6090(02)00003-2

N. D. Tran, N. K. Dutta, and N. R. Choudhury, Plasma-polymerized perfluoro(methylcyclohexane) coating on ethylene propylene diene elastomer surface: Effect of plasma processing condition on the deposition kinetics, morphology and surface energy of the film, Tessmar, A.M. Göpferich Customized PEG-derived copolymers for tissue-engineering applications, pp.123-132, 2005.
DOI : 10.1016/j.tsf.2005.05.046

D. S. Balakrishnan, Y. Kumar, and A. Yoshida, Chemical modification of poly(vinyl chloride) resin using poly(ethylene glycol) to improve blood compatibility, Biomaterials, vol.26, issue.17, pp.3495-3502, 2005.
DOI : 10.1016/j.biomaterials.2004.09.032

Y. Zhao and X. Chen, Method and device for depositing thin films by electrohydrodynamic spraying in particular post discharge Wang Surface modification of polyethylene film by acrylamide graft and alcoholysis for improvement of antithrombogenicity, 2007.

J. Wang, Chen Studies on surface graft polymerization of acrylic acid onto PTFE film by remote argon plasma initiation, Applied Surface Science, vol.253, pp.4709-4714, 2007.

E. Kato, E. Uchida, Y. Kang, and Y. Uyama, Polymer surface with graft chains, Progress in Polymer Science, vol.28, issue.2, pp.209-259, 2003.
DOI : 10.1016/S0079-6700(02)00032-1

B. Kim, J. K. Rhee, S. Y. Moon, and W. , Feasibility study of material surface modification by millimeter size plasmas produced in a pin to plane electrode configuration, Thin Solid Films, vol.515, issue.12, pp.4913-4917, 2007.
DOI : 10.1016/j.tsf.2006.10.069

C. Esena, S. Riccardi, M. Zanini, G. Tontini, and F. Poletti, Orsini Surface modification of PET film by a DBD device at atmospheric pressure, Surface and Coatings Technology, pp.664-667, 0200.

N. M. Borcia, D. Brown, and R. Dixon, The effect of an air-dielectric barrier discharge on the surface properties and peel strength of medical packaging materials, Surface and Coatings Technology, vol.179, issue.1, pp.70-77, 2004.
DOI : 10.1016/S0257-8972(03)00798-9

J. Larrieu, B. Held, H. Martinez, and Y. , Tison Ageing of atactic and isotactic polystyrene thin films treated by oxygen DC pulsed plasma, Surface and Coatings Technology, pp.2310-2316, 0200.

J. M. Grace and J. C. , A review of liquid atomization by electrical means, Journal of Aerosol Science, vol.25, issue.6, pp.1005-1019, 1994.
DOI : 10.1016/0021-8502(94)90198-8

K. Tang and A. , On the structure of an electrostatic spray of monodisperse droplets, Physics of Fluids, vol.6, issue.7, pp.2317-2332, 1994.
DOI : 10.1063/1.868182

C. Ev-pour-la-fonctions, pour O-C=O et 291

A. Wilken, J. Holländer, and . Behnisch, Surface radical analysis on plasma-treated polymers, Surface and Coatings Technology, vol.116, issue.119, pp.116-119, 1999.
DOI : 10.1016/S0257-8972(99)00282-0

R. Palit and P. Ghosh, Quantitative determination of carboxyl endgroups in vinyl polymers by the dye-interaction method, Journal of Polymer Science, vol.58, issue.166, pp.1225-1232, 1962.
DOI : 10.1002/pol.1962.1205816678

B. Poncin-epaillard, J. Chevet, and . Brosse, Reactivity of a polypropylene surface modified in a nitrogen plasma, Journal of Adhesion Science and Technology, vol.3, issue.4, pp.455-468, 1994.
DOI : 10.1163/156856194X00339

H. Choi, Y. Kim, Y. Zhang, S. Tang, S. Myung et al., Plasma-induced graft co-polymerization of acrylic acid onto the polyurethane surface, Surface and Coatings Technology, vol.182, issue.1, pp.55-64, 2004.
DOI : 10.1016/S0257-8972(03)00880-6