A. A. Adetayo, J. D. Lister, S. E. Pratsinis, and B. J. Ennis, Population balance modelling of drum granulation of materials with wide size distribution, Powder Technology, vol.82, issue.1, pp.37-49, 1995.
DOI : 10.1016/0032-5910(94)02896-V

A. A. Adetayo and B. J. Ennis, A new approach to modeling granulation processes for simulation and control purposes, Powder Technology, vol.108, issue.2-3, pp.202-209, 2000.
DOI : 10.1016/S0032-5910(99)00221-1

M. E. Aulton and M. Et-banks, Fluidised bed granulation-factors influencing the quality of the product, 1981.

R. Becher and E. Et-schlünder, Fluidized bed granulation: gas flow, particle motion and moisture distribution, Chemical Engineering and Processing: Process Intensification, vol.36, issue.4, pp.261-269, 1997.
DOI : 10.1016/S0255-2701(97)00003-2

R. Becher and E. Et-schlünder, Fluidized bed granulation???the importance of a drying zone for the particle growth mechanism, Chemical Engineering and Processing: Process Intensification, vol.37, issue.1, pp.1-6, 1998.
DOI : 10.1016/S0255-2701(97)00031-7

C. R. Bemrose and J. Dridwater, A review of attrition and attrition test methods, Powder Technology, vol.49, issue.2, pp.97-126, 1987.
DOI : 10.1016/0032-5910(87)80054-2

R. Boerefijn and M. J. Et-hounslow, Studies of fluid bed granulation in an industrial RD context, Chem. Eng, 2005.

J. Bimbenet, A. Duquenoy, and G. Et-trystram, Opérations mécaniques sur les solides divisés, p.564, 2002.

B. Castel, Mise en forme des solides In : Techniques de l'ingénieur, pp.1-26, 1995.

Y. Caiyuan, Q. Tao, and W. Et-xizhong, Heat and mass transfer for process of fluidized-bed spray granulation. Drying, Proceedings of the 13 th International Drying Symposium (China, pp.27-30, 2002.

R. Cherif, Contribution à l'étude de l'enrobage des particules solides en lit fluidisé, Thèse Génie de Procédés. INP, 1994.

S. A. Cryer, Modeling agglomeration processes in fluid-bed granulation, AIChE Journal, vol.1, issue.10, pp.2069-2078, 1999.
DOI : 10.1002/aic.690451005

B. Dencs and Z. Et-ormos, Particle formation from solution in a gas fluidized bed. II, Powder Technology, vol.31, issue.1, pp.93-99, 1982.
DOI : 10.1016/0032-5910(82)80008-9

K. Dewettinck, L. Deroo, W. Messens, and A. Et-huyghebaert, Agglomeration Tendency during Top-Spray Fluidized Bed Coating with Gums, LWT - Food Science and Technology, vol.31, issue.6, pp.576-584, 1998.
DOI : 10.1006/fstl.1998.0421

K. Dewettinck, A. Visscher, L. Deroo, and A. Et-huyghebaert, Modeling the steady-state thermodynamic operation point of top-spray fluidized bed processing, Journal of Food Engineering, vol.39, issue.2, pp.131-143, 1999.
DOI : 10.1016/S0260-8774(98)00144-7

M. Dueñas, G. Ausland, M. Fjeld, and B. Et-lie, Simulation of a hydrometallurgical leaching reactor modeled as a DAE system. Modelling, Identification and Control, pp.93-116, 2002.

R. Dumon, Les applications industrielles des lits fluidisés, p.162, 1981.

B. J. Ennis, G. T. Tardos, and R. Pfeffer, A microlevel-based characterization of granulation phenomena, Powder Technology, vol.65, issue.1-3, pp.257-272, 1991.
DOI : 10.1016/0032-5910(91)80189-P

I. Filková and P. Et-cedik, Nozzle atomization in spray drying In : Advances in drying, pp.204-215, 1984.

I. Filková and A. S. Et-mujumdar, Industrial spray drying In : Handbook of Industrial Drying, pp.263-307, 1995.

D. Geldart, Types of gas fluidization, Powder Technology, vol.7, issue.5, pp.285-292, 1973.
DOI : 10.1016/0032-5910(73)80037-3

M. J. Goldschmidt, G. G. Weijers, R. Boerefijn, and J. A. Et-kuipers, Discrete element modelling of fluidised bed spray granulation, Powder Technology, vol.138, issue.1, pp.39-45, 2003.
DOI : 10.1016/j.powtec.2003.08.045

A. M. Golovin, The solution of the coagulation equation for raindros, taking condensation into account. Soviet Physics-Doklady, pp.191-193, 1963.

J. Gretzinger and W. R. Marshall, In : Spray Drying, Ed. Masters K, pp.206-230, 1961.

T. Grogër, U. Tüzün, and D. M. Et-heyes, Modelling and measuring of cohesion in wet granular materials, Powder Technology, vol.133, issue.1-3, pp.203-215, 2003.
DOI : 10.1016/S0032-5910(03)00093-7

B. Guignon, L'enrobage de solides divisés en réacteur à lit fluide, Thèse Génie des Procédés, p.136, 2001.

K. P. Hapgood, J. D. Lister, E. T. White, P. R. Mort, and D. G. Jones, Dimensionless spray flux in wet granulation: Monte-Carlo simulations and experimental validation, Powder Technology, vol.141, issue.1-2, pp.20-30, 2004.
DOI : 10.1016/j.powtec.2004.02.005

S. Heinrich and L. Et-mörl, Description of the temperature, humidity and concentration distribution in gas-liquid-solid fluidised beds, International Journal of Thermal Sciences, vol.38, issue.2, pp.142-147, 1999.
DOI : 10.1016/S1290-0729(99)80051-9

S. Heinrich and L. Et-mörl, Fluidized bed spray granulation???A new model for the description of particle wetting and of temperature and concentration distribution, Chemical Engineering and Processing: Process Intensification, vol.38, issue.4-6, pp.635-663, 1999.
DOI : 10.1016/S0255-2701(99)00065-3

S. Heinrich, M. Peglow, M. Ihlow, M. Henneberg, and L. Et-mörl, Analysis of the start-up process in continuous fluidized bed spray granulation by population balance modelling, Chemical Engineering Science, vol.57, issue.20, pp.4369-4390, 2002.
DOI : 10.1016/S0009-2509(02)00352-4

S. Heinrich, J. Blumschein, M. Henneberg, M. Ihlow, M. Peglow et al., Study of dynamic multi-dimensional temperature and concentration distributions in liquid-sprayed fluidized beds, Chemical Engineering Science, vol.58, issue.23-24, pp.5135-5160, 2003.
DOI : 10.1016/j.ces.2003.08.010

M. Hounslow, R. Ryall, and V. R. Marshall, A discretized population balance for nucleation, growth, and aggregation, AIChE Journal, vol.34, issue.11, pp.1821-1832, 1988.
DOI : 10.1002/aic.690341108

K. Hukuo, Y. Hikichi, and K. Et-okado, Atomization of high-viscous liquids by parallel-flow air-liquid twophase nozzles. Unit Operations Processes, p.121, 1977.

S. Jin, Q. Hu, J. Wang, and Y. Et-jin, Fluidization of coarse particles in gas-solid conical beds, Chem. Eng. Processing, vol.39, pp.379-387, 2000.

A. W. Jenike, Storage and flow of solids. Bull, p.123, 1964.

P. C. Kapur and D. W. Et-fuerstenau, Coalescence Model for Granulation, Industrial & Engineering Chemistry Process Design and Development, vol.8, issue.1, pp.56-62, 1969.
DOI : 10.1021/i260029a010

P. Kapur, Kinetics of granulation by non-random coalescence mechanism, Chemical Engineering Science, vol.27, issue.10, pp.1863-1869, 1972.
DOI : 10.1016/0009-2509(72)85048-6

K. Y. Kim and W. R. Marshall, Drop-size distributions from pneumatic atomizers, AIChE Journal, vol.17, issue.3, pp.575-584, 1971.
DOI : 10.1002/aic.690170318

N. Krimitsas, Agglomération et enrobage de poudres alimentaires en lit fluidisé : application à la formulation de poudres dosées en fer et acide ascorique, 1995.

S. Kumar and D. Et-ramkrishna, On the solution of population balance equations by discretization???I. A fixed pivot technique, Chemical Engineering Science, vol.51, issue.8, pp.1311-1332, 1996.
DOI : 10.1016/0009-2509(96)88489-2

J. Kumar, M. Peglow, G. Warnecke, S. Heinrich, and L. Et-mörl, Improved accuracy and convergence of discretized population balance for aggregation: The cell average technique, Chemical Engineering Science, vol.61, issue.10, pp.3327-3342, 2006.
DOI : 10.1016/j.ces.2005.12.014

D. Kunii and O. Et-levenspiel, Fluidization Engineering, p.491, 1991.

C. Laguerie, Motion, heat and mass transfers, 1994.

K. Link and E. Et-schlünder, Fluidized bed spray granulation, Chemical Engineering and Processing: Process Intensification, vol.36, issue.6, pp.443-457, 1997.
DOI : 10.1016/S0255-2701(97)00022-6

J. D. Lister, K. P. Hapwood, J. N. Michaels, A. Sims, M. Roberts et al., Liquid distribution in wet granulation: dimensionless spray flux, Powder Technology, vol.114, issue.1-3, pp.32-39, 2001.
DOI : 10.1016/S0032-5910(00)00259-X

P. Marchal, R. David, P. K. Klein, and J. Villermaux, Crystallization and precipitation engineering???I. An efficient method for solving population balance in crystallization with agglomeration, Chemical Engineering Science, vol.43, issue.1, pp.59-67, 1988.
DOI : 10.1016/0009-2509(88)87126-4

S. J. Maronga and P. Et-wnukowski, Modelling of the three-domain fluidized-bed particulate coating process, Chemical Engineering Science, vol.52, issue.17, pp.2915-2925, 1997.
DOI : 10.1016/S0009-2509(97)00112-7

S. J. Maronga and P. Et-wnukowski, Establishing temperature and humidity profiles in fluidized bed particulate coating, Powder Technology, vol.94, issue.2, pp.181-185, 1997.
DOI : 10.1016/S0032-5910(97)03353-6

S. J. Maronga and P. Et-wnukowski, The use of humidity and temperature profiles in optimizing the size of fluidized bed in a coating process, Chem. Eng. Processing, vol.37, pp.423-432, 1998.

K. Masters, Spray Drying, pp.206-230, 1976.

J. P. Melcion and J. L. Et-ilari, Technologie des pulvérulents dans les IAA, 2003.

B. Novales, M. F. Devaux, F. Deschault, and J. P. Melcion, Caractérisation de la taille et de la forme des particules In : Technologie des pulvérulents dans les IAA, Eds. Melcion J.P. et Ilari J.L. Lavoisier, pp.31-63, 2003.

D. M. Newitt and J. M. Conway, A contribution to the theory and practice of granulation, Trans. Inst. Chem. Eng, vol.36, pp.422-442, 1958.

T. Niskanen, J. Yliruusi, M. Niskanen, and O. Et-kontro, Granulation of potassium chloride in instrumented fluidized bed granulator-Part I : effect of flow rate, Acta Pharm. Fennica, vol.99, pp.13-22, 1990.

T. Niskanen, M. Niskanen, J. Yliruusi, and E. Et-kristoffersson, Granulation in instrumented fluidized bed granulator-evaluation of the effects of two independent process variables on granule properties, Acta Pharm. Nord, vol.3, issue.1, pp.19-24, 1991.

Z. Ormos and K. Et-pataki, Studies on granulation in a fluidized bed VII. The effect of raw material upon the granule formation, Hungrarian J. Industrial Chem, vol.7, pp.89-104, 1979.

Z. D. Ormos, Granulation and coating, Powder Technology and Pharmaceutical Processes, 1994.

S. Palzer, Impact of glass transition of amorphous components on the agglomeration of food powders, Proceedings of ICEF9, 2004.

S. Palzer, The effect of glass transition on the desired and undesired agglomeration of amorphous food powders, Chemical Engineering Science, vol.60, issue.14, pp.3959-3968, 2005.
DOI : 10.1016/j.ces.2005.02.015

R. C. Panda, J. Zank, and H. Et-martin, Modeling the droplet deposition behavior on a single particle in fluidized bed spray granulation process, Powder Technology, vol.115, issue.1, pp.51-57, 2001.
DOI : 10.1016/S0032-5910(00)00279-5

M. Peglow, J. Kumar, G. Warnecke, S. Heinrich, and L. Et-mörl, A new technique to determine rate constants for growth and agglomeration with size- and time-dependent nuclei formation, Chemical Engineering Science, vol.61, issue.1, pp.282-292, 2006.
DOI : 10.1016/j.ces.2004.11.071

M. Peleg, FLOWABILITY OF FOOD POWDERS AND METHODS FOR ITS EVALUATION ? A REVIEW, Journal of Food Process Engineering, vol.25, issue.5, pp.303-328, 1977.
DOI : 10.1016/0032-5910(75)80045-3

Y. Peng and L. Et-fan, Hydrodynamic characteristics of fluidization in liquid-solid tapered beds, Chemical Engineering Science, vol.52, issue.14, 1997.
DOI : 10.1016/S0009-2509(97)00061-4

J. Pisecky, Handbook of milk powder manufacture, p.261, 1997.

M. Pohl, S. Hogekamp, A. Mandac, and H. Et-schubert, Instant properties of agglomerated food powders, Proceedings of ICEF9, 2004.

V. Pont, Contribution à l'étude de la granulation des poudres en lit fluidisé. Influence des paramètres du procédé et physico-chimiques sur la cinétique de granulation, Thèse Génie de Procédés. INP, 2000.

D. Ramkrishna, Population balances ? Theory and applications of particulate systems in engineering. Academic press, p.355, 2000.

G. Reynolds, An introduction to population balance modeling for granulation systems. Granulation course 22-23 Juin, 2004.

M. Rhodes, Introduction to Particle Technology, p.283, 1998.
DOI : 10.1002/9780470727102

J. M. Rodriguez-patiño, M. R. Rodríguez-niño, and C. Et-carrera-sanchez, Dynamic Interfacial Rheology as a Tool for the Characterization of Whey Protein Isolates Gelation at the Oil???Water Interface, Journal of Agricultural and Food Chemistry, vol.47, issue.9, pp.3640-3648, 1999.
DOI : 10.1021/jf981164q

F. Ronsse, Modelling heat and mass transfer in fluidised bed coating processes, Thèse Applied Biological Sciences, p.328, 2006.

B. D. Rohera and A. Et-zahir, Granulations in a Fluidized-Bed: Effect of Binders and Their Concentrations on Granule Growth and Modeling the Relationship Between Granule Size and Binder Concentration, Drug Development and Industrial Pharmacy, vol.1, issue.3, pp.773-792, 1993.
DOI : 10.3109/03639048709040152

P. N. Rowe, Estimation of solids circulation rate in a bubbling fluidised bed, Chemical Engineering Science, vol.28, issue.3, pp.979-980, 1973.
DOI : 10.1016/0009-2509(77)80037-7

K. Saleh, Contribution à l'étude de l'enrobage des poudres en lit fluidisé: étude expérimentale et modélisation du processus, Thèse Génie de Procédés. INP, p.237, 1998.

K. V. Sastry, Similarity size distribution of agglomerates during their growth by coalescence in granulation or green pelletization, International Journal of Mineral Processing, vol.2, issue.2, p.187, 1975.
DOI : 10.1016/0301-7516(75)90021-6

K. V. Sastry and D. W. Fuerstenau, Size distribution of agglomerates in coalescing disperse systems, Eng. Chem. Fundamentals, vol.9, issue.1, p.45, 1970.

H. Schubert, Principles of agglomeration, Int. Chem. Eng, vol.21, issue.3, pp.363-377, 1981.

H. Schubert, Food particle technology. Part I: Properties of particles and particulate food systems, Journal of Food Engineering, vol.6, issue.1, pp.1-32, 1987.
DOI : 10.1016/0260-8774(87)90019-7

H. Schubert, Instantization of powdered food products, Int. Chem. Eng, vol.33, issue.1, pp.28-45, 1993.

E. Scoville and M. Et-peleg, Evaluation of the Effects of Liquid Bridges on the Bulk Properties of Model Powders, Journal of Food Science, vol.11, issue.1, pp.174-177, 1981.
DOI : 10.1111/j.1365-2621.1981.tb14557.x

S. H. Schaafsma, P. Vonk, P. Segers, and N. W. Et-kossen, Description of agglomerate growth, Powder Technology, vol.97, issue.3, pp.183-190, 1998.
DOI : 10.1016/S0032-5910(97)03399-8

S. H. Schaafsma, P. Vonk, and N. W. Kossen, Fluid bed agglomeration with a narrow droplet size distribution, International Journal of Pharmaceutics, vol.193, issue.2, pp.175-187, 2000.
DOI : 10.1016/S0378-5173(99)00329-4

T. Schaefer and O. Et-worts, Control of fluidized bed granulation. III. Effects of inlet air temperature and liquid flow rate on granule size and size distribution Control of moisture content of granules in the drying phase, Arch. Pharm. Chem. Sci, vol.6, pp.1-13, 1978.

C. Srinivasakannan and N. Balasubramaniam, Particle growth in fluidised bed granulation, Chem. Biochem. Eng. Q, vol.17, issue.3, pp.201-205, 2003.

J. Shan, C. Guobin, M. Fan, B. Yu, W. Jinfu et al., Fluidization of fine particles in conical beds, Powder Technology, vol.118, issue.3, pp.271-274, 2001.
DOI : 10.1016/S0032-5910(00)00385-5

P. Smith and A. W. Et-nienow, On atomising a liquid into a gas fluidised bed, Chemical Engineering Science, vol.37, issue.6, pp.950-954, 1982.
DOI : 10.1016/0009-2509(82)80186-3

P. Smith and A. W. Et-nienow, Particle growth mechanisms in fluidised bed granulation ? I, Chem. Eng, 1983.

P. Smith and A. W. Et-nienow, Particle growth mechanisms in fluidised bed granulation???II, Chemical Engineering Science, vol.38, issue.8, 1983.
DOI : 10.1016/0009-2509(83)80043-8

R. H. Snow, T. Allen, B. J. Ennis, and J. D. Lister, Section 20: Size reduction and size enlargement. In: Perry's Chemical Engineers Handbook, 1997.

H. S. Tan, M. J. Goldschmidt, R. Boerefijn, M. J. Hounslow, A. D. Salman et al., Building population balance model for fluidized bed melt granulation: lessons from kinetic theory of granular flow, Powder Technology, vol.142, issue.2-3, pp.103-109, 2004.
DOI : 10.1016/j.powtec.2004.04.030

G. I. Tardos, M. I. Khan, and P. R. Mort, Critical parameters and limiting conditions in binder granulation of fine powders. Powder Tehcnol, pp.245-258, 1997.

E. Teunou, Caractéristiques mécaniques et rhéologiques des poudres ? test de cisaillement In : Technologie des pulvérulents dans les IAA, Eds. Melcion J.P. et Ilari J.L. Lavoisier, pp.93-116, 2003.

E. Teunou and D. Et-poncelet, Instantanéisation des poudres In : Technologie des pulvérulents dans les IAA, Eds. Melcion J.P. et Ilari J.L. Lavoisier, pp.653-665, 2003.

C. Turchiuli, Z. Eloualia, N. E. Mansouri, and E. Et-dumoulin, Fluidised bed agglomeration : agglomerates shape and end-use properties. Powder Tehcnol, pp.168-175, 2005.
DOI : 10.1016/j.powtec.2005.05.024
URL : https://hal.archives-ouvertes.fr/hal-01281837

M. Vanni, Approximate Population Balance Equations for Aggregation???Breakage Processes, Journal of Colloid and Interface Science, vol.221, issue.2, pp.143-160, 2000.
DOI : 10.1006/jcis.1999.6571

D. Verkoeijen, G. A. Pouw, M. H. Gabriël, and B. Scarlett, Population balances for particulate processes???a volume approach, Chemical Engineering Science, vol.57, issue.12, pp.2287-2303, 2002.
DOI : 10.1016/S0009-2509(02)00118-5

R. Utsumi, T. Hata, T. Hirano, H. Mori, J. Tsubaki et al., Attrition testing of granules with a tapping sieve, Powder Technology, vol.119, issue.2-3, pp.128-133, 2001.
DOI : 10.1016/S0032-5910(00)00412-5

B. Waldie, D. Wilkinson, and L. Zachra, Kinetics and mechanisms of growth in batch and continuous fluidized bed granulation, Chemical Engineering Science, vol.42, issue.4, pp.653-665, 1987.
DOI : 10.1016/0009-2509(87)80026-X

B. Waldie, Growth mechanism and the dependence of granule size on drop size in fluidized-bed granulation, Chemical Engineering Science, vol.46, issue.11, pp.2781-2785, 1991.
DOI : 10.1016/0009-2509(91)85147-P

L. S. Wan and K. S. Lim, Granulation of mixtures of lactose and starch by a fluidized bed technique, S.T.P. Pharma. Sci, vol.1, issue.5, pp.285-293, 1991.

L. S. Wan and K. S. Lim, Action of binders in the fluidized bed granulation of lactose, 1991.

S. Watano, Y. Sato, K. Miyanami, T. Murakami, Y. Ito et al., Scale-Up of Agitation Fluidized Bed Granulation. I. Preliminary Experimental Approach for Optimization of Process Variables., CHEMICAL & PHARMACEUTICAL BULLETIN, vol.43, issue.7, pp.43-1212, 1995.
DOI : 10.1248/cpb.43.1212

P. Wnukowski and F. Et-setterwall, The coating of particles in a fluidized bed (residence time distribution in a system of two coupled perfect mixers), Chemical Engineering Science, vol.44, issue.3, pp.493-505, 1989.
DOI : 10.1016/0009-2509(89)85027-4

H. Yan and G. V. Et-barbosa-canovas, ATTRITION EVALUATION FOR SELECTED AGGLOMERATED FOOD POWDERS: THE EFFECT OF AGGLOMERATE SIZE AND WATER ACTIVITY, Journal of Food Process Engineering, vol.21, issue.3, pp.37-49, 2001.
DOI : 10.1016/0032-5910(93)80037-B

C. Y. Yu, Y. K. Xu, and X. Z. Wang, STUDY OF FLUIDIZED-BED SPRAY GRANULATION, Drying Technology, vol.35, issue.9, pp.1893-1904, 1999.
DOI : 10.1002/jps.2600601224