B. Quand and ». Méthode-itérative-instationnaire, Quelques exemples sont : 1. La méthode du gradient conjugué avec ou sans préconditionnement (CG), 2. La méthode du résiduel minimal généralisé (GMRES), 3, La méthode du gradient biconjugué avec ou sans préconditionnement (BiCG), 4. La méthode du résiduel quasi?minimal (QMR), 5. La méthode du gradient conjugué carré avec ou sans préconditionnement (CGS)

L. Processus-de-résolution-dépendent-du-type-d-'´-ecoulementàecoulementà-résoudre, E. Cavitant, . Dans, and . Grilles-d-'aubes, Le processus de solution pour unécoulementunécoulement incompressible peutêtrepeutêtre très différent que celui pour unécoulement unécoulement compressible Si on considère la forme discrétisée du système d'´ equations de Navier?Stokes, on observe la dépendance linéaire de la vitesse par rapportàrapportà la pression et vice?versa. Ce couplage deséquationsdeséquations s'appelle « couplage pression-vitesse ». Un traitement spécial est nécessaire pour coupler la pression et la vitesse. On peut citeràciterà titre d'exemple : ? algorithme SIMPLE (Semi-Implicit Method for Pressure?Linked Equations, ? algorithme SIMPLEC (SIMPLE Consistent), 5.2. ETUDE DE L' ´

A. J. Acosta, An experimental study of cavitating inducers second, Symposium on Naval Hydrodynamics, 1958.

A. J. Acosta, Flow in inducer pumps, an apercu, 4 th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, 1992.

M. Aoki and K. Yamamoto, Inlet Reverse Flow Mechanism in Axial Flow Turbomachines With Neither Stall Nor Significant Radial Flow, Journal of Turbomachinery, vol.114, issue.2, pp.392-397, 1992.
DOI : 10.1115/1.2929156

V. H. Arakeri, Viscous effects in inception and development of cavitation on axi? symmetric bodies, Californie Institute of Technologie, 1973.

R. E. Arndt, Recent advances in cavitation research Advances in Hydroscience, pp.1-78, 1981.

R. E. Arndt and A. T. Ippen, Rough Surface Effects on Cavitation Inception, Journal of Basic Engineering, vol.90, issue.2, pp.249-261, 1968.
DOI : 10.1115/1.3605086

K. Ashihara and A. Goto, Effects of blade loading on pump inducer performance and flow fields ASME Fluids Engineering Division Summer Meeting, 2002.

F. Avellan and P. Dupont, Etude du sillage d'une poche de cavitation partielle se d??veloppant sur un profil hydraulique bi-dimensionnel, La Houille Blanche, vol.7, issue.7-8, pp.507-524, 1988.
DOI : 10.1051/lhb/1988044

F. Bakir, S. Kou¨?drikou¨?dri, R. Noguera, and R. Rey, Experimental Analysis of an Axial Inducer Influence of the Shape of the Blade Leading Edge on the Performances in Cavitating Regime, Journal of Fluids Engineering, vol.125, issue.2, pp.293-301, 2003.
DOI : 10.1115/1.1539872

F. Bakir, S. Kouidri, R. Noguera, and R. Rey, Design and analysis of axial inducers performances, ASME Fluids Engineering Division Summer Meeting, 1998.

F. Bakir, R. Rey, A. G. Gerber, T. Belamri, and B. Hutchinson, Numerical and Experimental Investigations of the Cavitating Behavior of an Inducer, International Journal of Rotating Machinery, vol.10, issue.1, pp.15-25, 2004.
DOI : 10.1155/S1023621X04000028

A. J. Bhattacharyya, A. Acosta, C. E. Brennen, and T. K. Caughey, Rotordynamic Forces in Cavitating Inducers, Journal of Fluids Engineering, vol.119, issue.4, pp.768-774, 1997.
DOI : 10.1115/1.2819496

C. E. Brennen, Hydrodynamics of pumps, 1994.
DOI : 10.1017/CBO9780511976728

C. E. Brennen, Cavitation and bubble dynamics, 1995.
DOI : 10.1017/CBO9781107338760
URL : http://authors.library.caltech.edu/25017/1/cavbubdynam.pdf

M. Callenaere, J. P. Franc, J. M. Michel, and M. Riondet, The cavitation instability induced by the development of a re-entrant jet, Journal of Fluid Mechanics, vol.444, pp.223-256, 2001.
DOI : 10.1017/S0022112001005420
URL : https://hal.archives-ouvertes.fr/hal-01134240

Y. Chen and S. D. Heister, A Numerical Treatment for Attached Cavitation, Journal of Fluids Engineering, vol.116, issue.3, pp.613-618, 1994.
DOI : 10.1115/1.2910321

Y. Chen and S. D. Heister, Modeling Hydrodynamic Nonequilibrium in Cavitating Flows, Journal of Fluids Engineering, vol.118, issue.1, pp.172-178, 1996.
DOI : 10.1115/1.2817497

J. F. Combes and A. Arsher, Etude de la cavitation dans la pompe SHF, La Houille Blanche, issue.5, pp.93-98, 2001.
DOI : 10.1051/lhb/2001063

O. Coutier-delgosha, R. Fortes-patella, B. Reboud, and J. L. Stutz, TEST CASE NO 30: UNSTEADY CAVITATION IN A VENTURI TYPE SECTION (PN), Multiphase Science and Technology, vol.16, issue.1-3, pp.207-218, 2004.
DOI : 10.1615/MultScienTechn.v16.i1-3.290

O. Coutier-delgosha, R. Fortes-patella, and J. L. Reboud, Evaluation of the Turbulence Model Influence on the Numerical Simulations of Unsteady Cavitation, Journal of Fluids Engineering, vol.125, issue.1, pp.38-45, 2003.
DOI : 10.1115/1.1524584

O. Coutier-delgosha and J. L. Reboud, Numerical simulation of the unsteady cavitation behavior of an inducer blade cascade, ASME Fluids Engineering Division Summer Meeting, 2000.

L. Agostino, M. V. Salvetti, R. Saurel, F. Petitpas, Y. Tsujimoto et al., Fluid Dynamics of Cavitation and Cavitating Turbopumps, 2008.

P. Dupont and F. Avellan, Numerical computation of a leading edge cavity, Cavitation Symposium 'Cavitation'91', first ASME?JSME Fluid Eng. Conf, 1991.

M. Farhat, F. Guennoun, and F. Avellan, The Leading Edge Cavitation Dynamics, Volume 1: Fora, Parts A and B, 2002.
DOI : 10.1115/FEDSM2002-31000

J. P. Franc, F. Avellan, B. Belhadji, J. Y. Billard, L. Briançonmarjolet et al., La cavitation : Mécanismes physiques et aspects industrielles, 1995.

J. P. Franc and J. M. Michel, Attached cavitation and the boundary layer: experimental investigation and numerical treatment, Journal of Fluid Mechanics, vol.95, issue.-1, pp.63-90, 1985.
DOI : 10.1017/S0022112070001672
URL : https://hal.archives-ouvertes.fr/hal-01133787

D. H. Fruman, J. L. Reboud, and B. Stutz, Estimation of thermal effects in cavitation of thermosensible liquids, International Journal of Heat and Mass Transfer, vol.42, issue.17, pp.3195-3204, 1999.
DOI : 10.1016/S0017-9310(99)00005-8

F. G. Ghahremani, Turbo?pump cavitation compliance, pp.6531-6532, 1970.

S. Gopalan and J. Katz, Flow structure and modeling issues in the closure region of attached cavitation, Physics of Fluids, vol.12, issue.4, pp.895-911, 2000.
DOI : 10.1063/1.870344

F. Guennoun, Y. A¨?ta¨?t-bouziad, M. Farhat, F. Pereira, and F. Avellan, Experimental investigation of a particular traveling bubble cavitation, 5 th International Symposium on Cavitation. Osaka, Japan. November 1?4, pp.67-79, 2003.

H. Horiguchi, S. Watanabe, and Y. Tsujimoto, Theoretical Analysis of Cavitation in Inducers With Unequal Blades With Alternate Leading Edge Cutback: Part II???Effects of the Amount of Cutback, Journal of Fluids Engineering, vol.122, issue.2, pp.419-424, 2000.
DOI : 10.1115/1.483272

H. Horiguchi, S. Watanabe, Y. Tsujimoto, and M. Aoki, A Theoretical Analysis of Alternate Blade Cavitation in Inducers, Journal of Fluids Engineering, vol.122, issue.1, pp.156-163, 2000.
DOI : 10.1115/1.483238

J. D. Huang, M. Aoki, and J. T. Zhang, Altenate blade cavitation on inducer, JSME international journal. Series B, issue.41 1, pp.1-6, 1998.

J. K. Jakobsen, Liquid rocket engine turbopump inducers, NASA, pp.17-24, 1971.

D. Japikse, W. D. Marscher, and R. B. Furst, Centrifugal pump design and performance, Concepts ETI, Inc, pp.933283-933292, 1997.

S. Jones, G. Evans, and K. Galvin, Bubble nucleation from gas cavities ??? a review, Advances in Colloid and Interface Science, vol.80, issue.1, pp.27-50, 1999.
DOI : 10.1016/S0001-8686(98)00074-8

W. P. Jones and B. E. Launder, The prediction of laminarization with a two-equation model of turbulence, International Journal of Heat and Mass Transfer, vol.15, issue.2, pp.301-314, 1972.
DOI : 10.1016/0017-9310(72)90076-2

D. D. Joseph, Cavitation and the state of stress in a flowing liquid, Journal of Fluid Mechanics, vol.366, pp.367-378, 1998.
DOI : 10.1017/S0022112098001530

A. P. Keller, Cavitation scale effects empirically found relations and the correlation of cavitation number and hydrodynamic coefficients, 4 th International Symposium on Cavitation, 2001.

T. Kimura, Y. Yoshida, T. Hashimoto, and M. Shimagaki, Numerical Simulation for Vortex Structure in a Turbopump Inducer: Close Relationship With Appearance of Cavitation Instabilities, Journal of Fluids Engineering, vol.130, issue.5, p.51104, 2008.
DOI : 10.1115/1.2911678

R. T. Knapp, Recent investigation on the mechanics of cavitation and erosion damage, Trans. ASME, vol.75, issue.8, pp.1045-1054, 1995.

A. Kubota, H. Kato, and H. Yamaguchi, A new modeling of cavitating flows : A numerical study of unsteady cavitation on a hydrofoil section, Journal of Fluids Engineering, vol.240, pp.59-96, 1992.

A. Kubota, H. Kato, H. Yamaguchi, and M. Maeda, Unsteady Structure Measurement of Cloud Cavitation on a Foil Section Using Conditional Sampling Technique, Journal of Fluids Engineering, vol.111, issue.2, pp.204-210, 1989.
DOI : 10.1115/1.3243624

J. L. Kueny and J. Desclaux, Theoretical analysis of cavitation in rocket engine inducers, ASME Pumping Machinery Symposium, 1989.

Y. Kuhn-de-chizelle, S. L. Ceccio, and C. E. Brennen, Observation and scaling of traveling bubbble cavitation, Journal of Fluid Mechanics, vol.293, pp.96-126, 1995.

R. F. Kunz, D. A. Boger, D. R. Stinebring, T. S. Chyczewski, J. W. Lindau et al., A preconditioned Navier???Stokes method for two-phase flows with application to cavitation prediction, Computers & Fluids, vol.29, issue.8, pp.849-875, 2000.
DOI : 10.1016/S0045-7930(99)00039-0

B. Lakshminarayana, Fluid dynamics of inducers, Journal of Fluids Engineering, vol.4, pp.411-427, 1982.

J. F. Lapray, Pompes centrifuges, hélico?centrifuges et axiales : cavitation. Techniques de l'Ingénieur, traité Génie mécanique, p.4313, 1994.

B. E. Launder, Second-moment closure: present??? and future?, International Journal of Heat and Fluid Flow, vol.10, issue.4, pp.282-300, 1989.
DOI : 10.1016/0142-727X(89)90017-9

B. E. Launder, G. J. Reece, and W. Rodi, Progress in the development of a Reynolds-stress turbulence closure, Journal of Fluid Mechanics, vol.61, issue.03, pp.537-566, 1975.
DOI : 10.1063/1.1694422

B. E. Launder and B. I. Sharma, Application of the energy dissipation model of turbulence to the calculation of flow near a spinning disc, Letters in Heat and Mass Transfer, vol.1, issue.2, pp.131-138, 1974.

B. E. Launder and D. B. Spalding, Lectures in Mathematical Models of Turbulence, 1972.

H. Lemonnier and A. Rowe, Another approach in modelling cavitating flows, Journal of Fluid Mechanics, vol.11, issue.-1, pp.557-580, 1988.
DOI : 10.1017/S0022112075002613

J. Y. Luo, R. I. Issa, and A. D. Gosman, Prediction of impeller induced flows in mixing vessels using multiple frames of reference, IChemE Symposium Series, Number, vol.136, pp.549-556, 1994.

I. Mejri, Analyse de l'Ecoulement Instationnaire Cavitant dans les Inducteurs, 2006.
URL : https://hal.archives-ouvertes.fr/pastel-00001944

I. Mejri, F. Bakir, S. Kouidri, and R. R. , Influence of peripheral blade angle on performance and stability of axial inducers, Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, vol.125, issue.4, pp.289-301, 2005.
DOI : 10.1243/095765005X28580

I. Mejri, F. Bakir, S. Kouidri, and R. Rey, Hub shape effects on the inducers performance under cavitation, Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, vol.124, issue.3, p.137, 2006.
DOI : 10.1243/09576509JPE137

I. Mejri, F. Bakir, R. Rey, and T. Belamri, Comparison of Computational Results Obtained From a Homogeneous Cavitation Model With Experimental Investigations of Three Inducers, Journal of Fluids Engineering, vol.128, issue.6, pp.1308-1323, 2006.
DOI : 10.1115/1.2353265

I. Mejri, T. Belamri, and F. Bakir, Cfx tascflowtm2.12 : Validation of the vof model on the lemfi inducer, CFX European Conference, 2002.

F. R. Menter, Two-equation eddy-viscosity turbulence models for engineering applications, AIAA Journal, vol.32, issue.8, pp.1598-1605, 1994.
DOI : 10.2514/3.12149

H. Nakai, H. Horiguchi, M. Nakano, and Y. Tsujimoto, Cavitating flows in centrifugal impellers and their stability analysis, 5 th International Symposium on Cavitation, 2003.

R. Noguera, R. Rey, F. Massouh, F. Bakir, and S. Kouidri, Design and analysis of axial pumps, ASME Fluids Engineering, Second Pumping Machinery Symposium, pp.95-111, 1993.

M. Nohmi and A. Goto, Cavitation cfd in centrifugal pump, 5 th International Symposium on Cavitation, 2003.

F. Numachi, R. Oba, and I. Chida, Effect of surface roughness on cavitation performance of hydrofoils, Report II. Trans. of ASME, J. Basic Eng, 1965.

C. Offtinger, C. Henry, and R. Morel, Instabilité de fonctionnement en débit partiel d'un inducteur fretté. comparaison avec le cas non fretté, 3` eme journée cavitation, pp.31-38, 1996.

M. Oshima, A Study on Suction Performance of a Centrifugal Pump with an Inducer, Bulletin of JSME, vol.10, issue.42, pp.959-965, 1967.
DOI : 10.1299/jsme1958.10.959

J. L. Reboud, B. Stutz, and O. Coutier-delgosha, Two?phase flow structure of cavitation : Experiment and modeling of unsteady effects, 3 th International Symposium on Cavitation, 1998.

R. Rey, F. Bakir, and R. Noguera, Conception et ma??trisema??trise du fonctionnement des turbomachines, 2001.

H. Rouse and J. S. Mcnown, Cavitation and pressure distribution : Head forms at zero angles of yaw, Studies in Engineering. Bulletin, vol.32, 1948.

J. Sauer and G. H. Schnerr, Unsteady cavitating flow ? a new cavitation model based on a modified front capturing method and bubble dynamics, ASME Fluids Engineering Division Summer Meeting, 2000.

T. H. Shih, W. W. Liou, A. Shabbir, Z. Yang, and J. Zhu, A new k-?? eddy viscosity model for high reynolds number turbulent flows, Computers & Fluids, vol.24, issue.3, pp.227-238, 1995.
DOI : 10.1016/0045-7930(94)00032-T

A. K. Singhal, M. M. Athavale, H. Y. Li, and Y. Jiang, Mathematical Basis and Validation of the Full Cavitation Model, Journal of Fluids Engineering, vol.124, issue.3, pp.617-624, 2002.
DOI : 10.1115/1.1486223

A. K. Singhal, N. Vaidya, and A. D. Leonard, Multi?dimensional simulation of cavitating flows using a pdf model for phasechange, ASME Fluids Engineering Division Summer Meeting, 1997.

P. R. Spalart, W. H. Jou, M. Strelets, and S. R. Allmaras, Comments on the feasibility of les for wings, and on a hybrid rans/les approach, First AFSOR International Conference on DNS/LES, pp.4-8, 1997.

B. Stutz and J. L. Reboud, Experiments on unsteady cavitation, Experiments in Fluids, vol.22, issue.3, pp.191-198, 1997.
DOI : 10.1007/s003480050037

B. Stutz and J. L. Reboud, Two-phase flow structure of sheet cavitation, Physics of Fluids, vol.9, issue.12, pp.3678-3686, 1997.
DOI : 10.1063/1.869505

L. Tassin and S. L. Ceccio, Experimental examination of the flow near the leading edge of an attached cavity : Part 1 ? detachment of two?dimensional cavities, Journal of Fluid Mechanics, vol.376, pp.61-90, 1998.

Y. Tsujimoto, Simple rules for cavitation instabilities in turbomachinery, 4 th International Symposium on Cavitation, 2001.

Y. Tsujimoto, Cavitation instabilities in inducer, NATO, 2006.

Y. Tsujimoto, H. Horiguchi, and X. Qiao, Backflow From Inducer and Its Dynamics, Volume 1: Symposia, Parts A and B, 2005.
DOI : 10.1115/FEDSM2005-77381

M. Tulin, Linearized theory for flows about lifting foils at zero cavitation number, 1955.

Y. Ventikos and G. Tzabiras, A numerical method for the simulation of steady and unsteady cavitating flows, Computers & Fluids, vol.29, issue.1, pp.63-88, 2000.
DOI : 10.1016/S0045-7930(98)00061-9

S. Watanabe, K. Sato, Y. Tsujimoto, and M. Kamijo, Analysis of Rotating Cavitation in a Finite Pitch Cascade Using a Closed Cavity Model and a Singularity Method, Journal of Fluids Engineering, vol.121, issue.4, pp.834-840, 1999.
DOI : 10.1115/1.2823544

T. Watanabe and H. Harada, Suppression of Secondary Flows in a Turbine Nozzle With Controlled Stacking Shape and Exit Circulation by 3D Inverse Design Method, Volume 1: Aircraft Engine; Marine; Turbomachinery; Microturbines and Small Turbomachinery, pp.99-72, 1999.
DOI : 10.1115/99-GT-072

T. Watanabe and Y. Kawata, Research on the oscillation in cavitating inducer, In IAHR Symposium, vol.2, pp.265-277, 1978.

D. C. Wilcox, Turbulence Modeling for CFD, 1998.

T. Y. Wu, A Free Streamline Theory for Two-Dimensional Fully Cavitated Hydrofoils, Journal of Mathematics and Physics, vol.23, issue.5, pp.236-265, 1956.
DOI : 10.1002/sapm1956351236

V. Yakhot and S. A. Orszag, Renormalization group analysis of turbulence. I. Basic theory, Journal of Scientific Computing, vol.23, issue.1, pp.3-51, 1986.
DOI : 10.1007/BF01061452

H. Yamagushi and H. Kato, On application of non-linear cavity flow theory to tick foil sections, 2 nd International Symposium on Cavitation, 1994.

N. Yamanishi, S. Fukao, X. Qiao, C. Kato, and T. Tsujimoto, LES Simulation of Backflow Vortex Structure at the Inlet of an Inducer, Journal of Fluids Engineering, vol.129, issue.5, pp.587-594, 2007.
DOI : 10.1115/1.2717613

K. Yokota, K. Kurahara, D. Kataoka, Y. Tsujimoto, and A. J. Acosta, A Study of Swirling Backflow and Vortex Structure at the Inlet of an Inducer., JSME International Journal Series B, vol.42, issue.3, pp.451-459, 1999.
DOI : 10.1299/jsmeb.42.451

M. Zangeneh, M. Goto, and T. Takemura, Suppression of Secondary Flows in a Mixed-Flow Pump Impeller by Application of 3D Inverse Design Method: Part 1 ??? Design and Numerical Validation, Volume 1: Turbomachinery, pp.536-543, 1996.
DOI : 10.1115/94-GT-045