M. Attigui, Modélisation du comportement dynamique des structures fissurées par la mécanique de la rupture, Thèse de Doctorat, 1997.

H. Baaj, Comportement à la fatigue des matériaux granulaires traités aux liants hydrocarbonés, Thèse de Doctorat, Institut National des Sciences Appliquées de Lyon, 2002.

L. Banks-sills, Application of the Finite Element Method to Linear Elastic Fracture Mechanics, Applied Mechanics Reviews, vol.44, issue.10, pp.447-461, 1991.
DOI : 10.1115/1.3119488

L. Banks-sills, I. Hershkovitz, P. A. Wawrzynek, R. Eliasi, and A. R. Ingraffea, Methods for calculating stress intensity factors in anisotropic materials: Part I???z=0 is a symmetric plane, Engineering Fracture Mechanics, vol.72, issue.15, pp.2328-2358, 2005.
DOI : 10.1016/j.engfracmech.2004.12.007

G. Barenblatt, The Mathematical Theory of Equilibrium Cracks in Brittle Fracture, Advances in Applied Mechanics, vol.7, pp.55-129, 1962.
DOI : 10.1016/S0065-2156(08)70121-2

G. I. Barenblatt, The formation of equilibrium cracks during brittle fracture. General ideas and hypotheses. Axially-symmetric cracks, Journal of Applied Mathematics and Mechanics, vol.23, issue.3, pp.622-636, 1959.
DOI : 10.1016/0021-8928(59)90157-1

I. Barsoum and K. R. Chandran, Stress intensity factor solutions for cracks in finite-width three layer laminates with and without residual stress effects, Engineering Fracture Mechanics, vol.70, issue.15, pp.2015-2031, 2002.
DOI : 10.1016/S0013-7944(02)00260-6

R. Barsoum, On the use of isoparametric finite elements in linear fracture mechanics, International Journal for Numerical Methods in Engineering, vol.26, issue.1, pp.25-37, 1976.
DOI : 10.1002/nme.1620100103

J. Begley and J. Landes, The J-integral as a fracture criterion, ASTM STP, vol.514, pp.1-20, 1972.

A. Birinci, Axisymmetric crack problem of a thick-walled Cylinder with cladding, International Journal of Engineering Science, vol.40, issue.15, pp.1729-1750, 2002.
DOI : 10.1016/S0020-7225(02)00039-3

A. Birinci, T. Sukru-ozsahin, and R. , Axisymmetric circumferential internal crack problem of a thick-walled cylinder with inner and outer claddings, European Journal of Mechanics - A/Solids, vol.25, issue.5, pp.764-777, 2006.
DOI : 10.1016/j.euromechsol.2005.11.007

D. Bodin, Modèle d'endommagement cyclique : Application à la fatigue des enrobé bitumineux, Thèse de Doctorat, 2002.

H. Booij, Generalization of Kramers-Kronig transforms and some approximations of relations between viscoelastic quantities, Rheologica Acta, vol.19, issue.1, pp.15-24, 1982.
DOI : 10.1007/BF01520701

N. Brachet and L. , essai de rupture locale répétée sur bitume, IUP Génie des Système Industriels -Option Mécanique et Matériaux, 1999.

K. Broberg, Cracks and Fracture, 1999.

H. Bui, Dualité entre les intégrales de contour, Compte Rendu Académie Sciences, 1973.

H. Bui and A. Ehrlacher, Propagation of damage in elastic and plastic solid, 1981.

H. Bui and J. Proix, Découplage des mode mixtes de rupture en thermoélasticité par des intégrales indépendantes du contour, Actes du troisième colloque Tendances Actuelles en Calcul de Structures, pp.631-643, 1985.

E. Castaneda, Contribution de méthodes non destructives à l'évaluation de l'effet de l'eau sur les enrobés bitumineux, Thèse de Doctorat, Laboratoire Centrale des Ponts et Chaussées, 2005.

E. Castaneda and C. Such, Evaluation of moisture sensitivity of bituminous mixtures by a complex modulus approach, Transportation Research Board, vol.1891, pp.62-67, 2004.

E. Chailleux, A mathematical-based master-cuve construction method applied to complex modulus of bituminous materials, Road material and Payvement Design

E. Chailleux, Viscoanalyse, Laboratoire Centrale des Ponts et Chaussées , version, Beta, 2007.

E. Chailleux and D. , Hamon, Determination of the low temperature bitumen cracking properties : fracture mechanics principle applied to a three points bending test using a non homogeneous geometry

R. Chambard, L. Francken, J. Lesage, A. Stawiarski, and C. , Such, Les liants hydrocarbonés, 2003.

O. Chenevez, Essai de rupture locale répétée du bitume, 2001.

R. , C. Mc-cartney, and L. N. , Reponse : Discussion of "A rate-dependent criterion for crack growth, International Journal of Fracture, vol.16, pp.233-237, 1980.

R. Christensen, Viscoelastic crack growth ? A response note, International Journal of Fracture, vol.24, issue.6, pp.169-176, 1981.
DOI : 10.1007/BF00681563

R. Christensen and D. Anderson, Interpretation of dynamic mechanical test data for paving grade asphalt cement, pp.61-67, 1992.

R. Christensen and E. Wu, A theory of crack growth in viscoelastic meterials, Engineering Fracture Mechanics, vol.1981, issue.5, pp.215-225, 1981.

R. M. Christensen, A rate-dependent criterion for crack growth, International Journal of Fracture, vol.27, issue.1, pp.3-21, 1979.
DOI : 10.1007/BF00115904

R. M. Christensen, Theory of Viscoelasticity, Journal of Applied Mechanics, vol.38, issue.3, 1982.
DOI : 10.1115/1.3408900

R. M. Christensen and L. N. Mccartney, Viscoelastic crack growth, International Journal of Fracture, vol.15, issue.1, pp.11-13, 1983.
DOI : 10.1007/BF00020162

T. Coleman and Y. Li, On the convergence of interior-reflective Newton methods for nonlinear minimization subject to bounds, Mathematical Programming, vol.51, issue.1, pp.189-224, 1994.
DOI : 10.1007/BF01582221

T. Coleman and Y. Li, A Reflective Newton Method for Minimizing a Quadratic Function Subject to Bounds on Some of the Variables, SIAM Journal on Optimization, vol.6, issue.4, pp.1040-1058, 1996.
DOI : 10.1137/S1052623494240456

G. Couarraze and J. Grossiord, Initiation à la rhéologie, 1991.

D. Cuisinier, Y. Berthaud, and M. Francois, Orniérage des chaussées : identification des paramètres élasto-plastiques d'un enrobé bitumeux à partir d'un essai stucturel, CFM 2007 -1 Congrès Français de Mécanique, 2007.

C. De and L. Roche, Module de rigidité et comportement en fatigue des enrobé bitumineux. Expérimentations et nouvelles perspectives d'analyse, Thèse de Doctorat, 1996.

C. De-la-roche and N. Rivière, Fatigue behavior of asphalt mixes : Influence of laboratory test procedures on fatigue performances, International Society for Asphalt Pavements, pp.899-917, 1997.

G. De-roeck and A. Wahab, Strain energy release rate formulae for 3D finite element, Engineering Fracture Mechanics, vol.50, issue.4, pp.569-580, 1995.
DOI : 10.1016/0013-7944(94)00232-7

H. Delorenzi, On the energy release rate and the J-integral for 3-D crack configurations, International Journal of Fracture, vol.44, issue.No. 3, pp.183-193, 1982.
DOI : 10.1007/BF00017129

H. Delorenzi, Energy release rate calculations by the finite element method, Engineering Fracture Mechanics, vol.21, issue.1, pp.129-143, 1985.
DOI : 10.1016/0013-7944(85)90060-8

J. E. Dennis, Nonlinear Least-Squares, State of the Art in Numerical Analysis, 1977.

P. Destuynder and M. Djaoua, Sur une Interpr??tation Math??matique de l'Int??grale de Rice en Th??orie de la Rupture Fragile, Mathematical Methods in the Applied Sciences, vol.III, issue.1, pp.70-87, 1981.
DOI : 10.1002/mma.1670030106

P. Destuynder, M. Djaoua, and S. Lescure, Quelques remarques sur la mécanique de la rupture élastique, Journal de Mécanique Théorique et Appliqué, vol.2, issue.1, pp.113-135, 1983.

T. Doan, M. Alimami, J. Piau, and F. Moutier, Endommagement par fatigue des enrobés bitumieux : influence des paramètres de composition, Proceeding of the first international RILEM Congress, pp.1155-1161, 1987.

G. Dobson, The dynamic mechanical properties of bitumen, Proceeding of the Association of Asphalt Paving Technologist, pp.123-139, 1969.

A. Drozdov, Mechanics of Viscoelastic Solids, 1998.

F. Dubois, Modélisation du comportement mécanique des milieux viscoélastiques fissurés : Application au matériau bois, Thèse de Doctorat, 1997.

F. Dubois, C. Chazal, and C. Petit, A finite element analysis of creep-crack growth in viscoelastic media, Mechanics of Time-Dependent Materials, vol.2, issue.3, pp.269-286, 1998.
DOI : 10.1023/A:1009831400270

F. Dubois, . Ch, and . Petit, Modelling of the crack growth initiation in viscoelastic media by the G??v-integral, Engineering Fracture Mechanics, vol.72, issue.18, pp.2821-2836, 2005.
DOI : 10.1016/j.engfracmech.2005.04.003

D. Dugdale, Yielding of steel sheets containing slits, Journal of the Mechanics and Physics of Solids, vol.8, issue.2, pp.100-104, 1960.
DOI : 10.1016/0022-5096(60)90013-2

G. Durand, M. Ballie, J. Poirier, and M. Robert, Application of the new AASHTO MP1-A specification scheme to modified binders : low temperature performance of SBS

M. Duriez, Bétons hydrocarbonés -technologie des essais, 1960.

A. Ehrlacher, Contribution à l'étude thermodynamique de la progression de fissure et à la mécanique de l'endommagement brutal, Thèse de docteur d'État, 1985.

A. Ehrlacher, Viscoélasticité en grandes transformations : Étude de cas de calcul de structures en viscoélasticité en grandes transformations, 2004.

A. Abd, Développement d'une méthode de prédiction des déformations de surface des chaussées à assises non traitées, Thèse de Doctorat, École doctorale Sciences Physiques pour l'Ingénieur (SPI), 2006.

F. Erdogan, Stress Intensity Factors, Journal of Applied Mechanics, vol.50, issue.4b, pp.992-1002, 1983.
DOI : 10.1115/1.3167212

J. Eshelby, The continuum theory of lattice deffects, Solid Stat, Physics, vol.2, pp.79-144, 1968.

J. Ferry, Viscoelastic Properties of Polymers, p.264, 1980.

J. Ferry, Viscoelastic Properties of Polymers, 1980.

D. C. Fleming, Delamination modeling of composites for improved crash analysis, Tech. rep., Aerospace Engineering Program Florida Institute of Technology, 1999.

L. Francken, Progress report 1992???1996, Materials and Structures, vol.30, issue.S1, pp.33-42, 1992.
DOI : 10.1007/BF02539274

R. Frassine and A. Pavan, An application of viscoelastic fracture criteria to steady crack propagation in a polymeric material under fixed deformation, International Journal of Fracture, vol.16, issue.4, pp.303-317, 1990.
DOI : 10.1007/BF00035089

P. Gilles, P. Mourgue, and M. Rochette, Précision du calcul de la force d'extension de fissure G : effets du maillage et avantages de la méthode g ??, Acte du Colloque National en Calcul de Structures, pp.639-670, 1993.

J. Goodrich, Asphalt and polymer modified asphalt properties related to the performance of asphaltic concrete mixes, Proceedings of the Association of Asphalt Paving Technologist, pp.116-175, 1988.

L. Gray, Evaluation of hypersingular integrals in the boundary element method, Mathematical and Computer Modelling, vol.15, issue.3-5, pp.165-174, 1991.
DOI : 10.1016/0895-7177(91)90062-C

L. J. Gray, A. V. Phan, G. H. Paulino, and T. Kaplan, Improved quarter-point crack tip element, Engineering Fracture Mechanics, vol.70, issue.2, pp.269-283, 2003.
DOI : 10.1016/S0013-7944(02)00027-9

URL : http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.117.1771

A. Griffith, The Phenomena of Rupture and Flow in Solids, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.221, issue.582-593, pp.163-198, 1921.
DOI : 10.1098/rsta.1921.0006

V. G. Gustavo, J. Planas, and M. , Elices, K I evaluation by the displacement extrapolation technique, Engineering Fracture Mechanics, vol.66, pp.243-255, 2000.

F. Hammoum, E. Chailleux, H. Nguyen, A. Ehrlacher, and D. Bodin, Experimental and numerical analysis of crack initiation and growthin thin film of bitumen

F. Hammoum and P. Hornych, Quantitative study of bituminous materials microstructure by digital image analysis, Eurasphalt and Eurobitume Congress, pp.1946-1955, 2004.

J. Harvey, Bitumen film in tension, Thèse de Doctorat, 2000.

J. Heck, Modélisation des déformations réversibles et étude des déformations permanentes des enrobés bitumineux -application à l'ornièrage des chaussées, Thèse de Doctorat, 2001.

T. Hellen, On the method of virtual crack extensions, International Journal for Numerical Methods in Engineering, vol.85, issue.1, pp.187-207, 1975.
DOI : 10.1002/nme.1620090114

R. Henshell and K. Shaw, Crack tip finite elements are unnecessary, International Journal for Numerical Methods in Engineering, vol.31, issue.3, pp.495-507, 1975.
DOI : 10.1002/nme.1620090302

S. A. Hesp, An improved low-temperature asphalt binder specification method, Tech. rep., Queen's University (23 aoû, 2003.

S. A. Hesp, T. Terlouw, and W. C. Vonk, Low temperature performance of sbs-modified asphalt mixes, in : Association of Asphalt Paving Technologists, 1999.

W. Heukelom, Une méthode améliorée de caractérisation des bitumes par leur propriétés mécaniques, Bulletin de Liaison du Laboratoire Central des Ponts et Chaussées, vol.76, pp.55-64, 1975.

. Hibbitt, &. Karlsson, and . Sorensen, ABAQUS Scripting User's Manual, Version 6, 2004.

. Hibbitt, &. Karlsson, and . Sorensen, ABAQUS Users's Documentation, Version 6, 2004.

. Hibbitt, &. Karlsson, and . Sorensen, Crack propagation analysis Section 7.10.3 of the ABAQUS Analysis User's Manual, 2004.

. Hibbitt, &. Karlsson, and . Sorensen, ABAQUS Analysis Users's Manual, Version 6, 2007.

C. Huet, étude par une méthode d'impédance du comportement viscoélastique des matériaux hydrocarbonés, 1963.

J. W. Hutchinson, Plastic stress and strain fields at a crack tip, Journal of the Mechanics and Physics of Solids, vol.16, issue.5, pp.337-342, 1968.
DOI : 10.1016/0022-5096(68)90021-5

J. W. Hutchinson, Singular behaviour at the end of a tensile crack in a hardening material, Journal of the Mechanics and Physics of Solids, vol.16, issue.1, pp.13-31, 1968.
DOI : 10.1016/0022-5096(68)90014-8

G. Irwin, Fracturing of Metals, 1948.

G. Irwin, Analysis of stresses and strains near the end of cracking traversing a plate, Journal of Applied Mechanics, vol.24, pp.361-364, 1957.

I. Jurine, Essai de rupture locale répétée du bitume, 2000.

M. Kadir, Crack propagation in rubbers, Thèse de Doctorat, 1980.

M. Kanninen, E. Rybicki, R. Stonesifer, D. Broek, A. Rosenfield et al., Elastic- Plastic Fracture Mechanics for Two-Dimensionnal Stable Crack Growth and Instability Problems, Elastic-Plastic Fracture Mechanics, ASTM STP, pp.668-121, 1979.

K. Kishimoto, S. Aoki, and M. Sakata, Use of J^-Integral in Dynamic Analysis of Cracked Linear Viscoelastic Solids by Finite-Element Method, Journal of Applied Mechanics, vol.49, issue.1, pp.75-80, 1982.
DOI : 10.1115/1.3162074

W. G. Knauss, Delayed failure ? the Griffith problem for linearly viscoelastic materials, International Journal of Fracture Mechanics, vol.6, issue.1, pp.7-20, 1970.
DOI : 10.1007/BF00183655

R. Krueger, Virtual crack closure technique: History, approach, and applications, Applied Mechanics Reviews, vol.57, issue.2, 2002.
DOI : 10.1115/1.1595677

S. Largeaud, H. Raffegeau, B. Simaillaud, B. Eckmann, E. Sauger et al., The use of direct tension tests for the assessment of low temperature properties of bituminous binders, 6th RILEM Symposium PTEBM'03, pp.95-101, 2003.

S. Lcpc, Conception et dimensionnement des structures de chaussées -Guide technique, LCPC et SETRA, 1994.

L. Lee and C. Wang, Stress intensity factors by weight function method for cracked composite laminates, Engineering Fracture Mechanics, vol.48, issue.2, pp.267-279, 1994.
DOI : 10.1016/0013-7944(94)90084-1

N. Lee, G. Morrisson, and S. Hesp, Low temperature fracture of polyethylene-modified asphalt binders and asphalt concrete mixes, pp.534-574, 1995.

A. Leski, Implementation of the virtual crack closure technique in engineering fe calculations, Finite Elements in, Analysis and Design, vol.43, issue.3, pp.261-268, 2007.

C. Leung and D. L. Mcdowell, Inclusion of primary creep in the estimation of the C t parameter, International Journal of Fracture, vol.36, issue.6, pp.81-104, 1990.
DOI : 10.1007/BF00041997

S. Lin and J. Abel, Variation approach for a new direct-integration form of the virtual crack extension method, International Journal of Fracture, vol.38, pp.217-235, 1988.

R. Linder, F. Moutier, M. Pénet, and F. Peyret, La machine asservie d'essai rhéologiques (MAER LCPC) et son utilisation pour l'essai de traction direct sur enrobés

S. Maillard, Fissuration et autoréparation des liants bitumieux -Apport de l'essai de Rupture Locale Répétée sur Bitume, Thèse de Doctorat, l'École Central de Nantes et l'Université de Nantes, 2005.

S. Maillard, C. De-la-roche, F. Hammoum, L. Gaillet, E. Daouben et al., Comportement à la rupture du bitume en film mince sous chargement répété -Application par des méthodes de contrôle non destructif, pp.239-245, 2003.

S. Maillard, C. De-la-roche, F. Hammoum, L. Gaillet, and C. Such, Experimental investigation of fracture and healing of bitumen at pseudo-contact of two aggregates, Eurobitume, pp.1291-1304, 2004.

S. Maillard, C. De-la-roche, F. Hammoum, C. Such, and J. M. Piau, Bitumen healing investigation using a specific fracture test, Road Materials and Pavement Design, vol.32, issue.sup1
DOI : 10.1007/BF01140837

J. Mandel, Sur les corps visco-élastique à comportement linéaire, Compte Rendu de l'Académie des Sciences, 1995.

D. Marquardt, An Algorithm for Least-Squares Estimation of Nonlinear Parameters, Journal of the Society for Industrial and Applied Mathematics, vol.11, issue.2, pp.431-441, 1963.
DOI : 10.1137/0111030

J. Marvillet and A. Vershave, Cohésion : critère d'appréciation des liants pour enduits ?, Eurobitume Symposium, pp.124-127, 1981.

L. N. Mccartney, Crack growth laws for a variety of viscoelastic solids using energy and COD fracture criteria, International Journal of Fracture, vol.333, issue.1, pp.31-40, 1977.
DOI : 10.1007/BF00115906

L. N. Mccartney, Crack propagation, resulting from a monotonic increasing applied stress, in a linear viscoelastic material, International Journal of Fracture, vol.3, issue.5, pp.641-654, 1977.
DOI : 10.1007/BF00017297

L. N. Mccartney, DISCUSSION, Australian Journal of Agricultural Economics, vol.2, issue.1, pp.229-232, 1980.
DOI : 10.1111/j.1467-8489.1958.tb00173.x

L. N. Mccartney, Response to discussion concerning kinetic criteria for crack in viscoelastic materials, International Journal of Fracture, vol.22, issue.6, pp.161-161, 1981.
DOI : 10.1007/BF00681562

L. N. Mccartney, On the energy balance approach to fracture in creeping materials, International Journal of Fracture, vol.8, issue.2, pp.99-113, 1982.
DOI : 10.1007/BF00016567

L. N. Mccartney, Crack-growth predictions for viscoelastic materials exhibiting non-uniform craze deformation, International Journal of Fracture, vol.37, issue.4, pp.279-301, 1988.

B. Moran and C. Shih, A general treatment of crack tip contour integrals, International Journal of Fracture, vol.34, issue.4, pp.295-310, 1987.
DOI : 10.1007/BF00276359

F. Moutier, Étude statistique de l'effet de composition des enrobé sur leur comportement en fatigue et leur module complexe, Bulletin de Liaison du Laboratoire Centrale des Ponts et Chaussées, pp.33-41, 1991.

F. Moutier, G. Ramond, C. Such, and J. Bonnot, Influence of nature of asphalt cements on fatigue strength of asphalt mixture under imposed strain, SHRP Conferencë Sharing the benefits¨,benefits¨benefits¨, 1990.

Y. Murakami, Stress Intensity Factors Handbook, 1987.

A. Needleman, A Continuum Model for Void Nucleation by Inclusion Debonding, Journal of Applied Mechanics, vol.54, issue.3, pp.525-531, 1987.
DOI : 10.1115/1.3173064

A. Needleman and V. Tvergaard, An analysis of ductile rupture modes at a crack tip, Journal of the Mechanics and Physics of Solids, vol.35, issue.2, pp.151-183, 1987.
DOI : 10.1016/0022-5096(87)90034-2

H. Nguyen, évaluation des performances prédictives de modèles d'endommagement par fatigue des énrobés bitumineux, Master dea, Insttitut National des Sciences Appliquées (INSA) de Rennes & Laboratoire Central des Ponts et Chaussées (LCPC), 2004.

E. Norme, Détermination de la température FRAASS des liants bitumineux, Tech. rep., Afnor, 1999.

E. Norme, Essai de traction directe sur haltère, Tech. rep. Afnor, 2004.

E. Norme, Détermination des caractéristiques de traction des bitumes modifiés par la méthode de force ductilité, 2004.

E. Norme, Détermination de la pénétrabilité à l'aiguille, Tech. rep, Afnor, 1999.

E. Norme, Détermination de la température de ramollissement, Tech. rep, 2000.

E. Norme, Bitumes et liants itumineux -Détermination du module de rigidité en flexion -Rhéomètre à flexion du barreau (BBR), Tech. rep., Afnor, 2005.

N. Norme, 98-261-1, Détermination de la résistance à la fatigue des mélange hydrocarbonés -Part 1 : Essai par flexion à amplitude de flèche constante, 2001.

F. Olard, Comportement thermomécanique des enrobés bitumineux à basses températures. Relations entre les propriétés du liant et de l'enrobé, Thèse de Doctorat, Institut National des Sciences Appliquées de Lyon, 2003.

D. M. Parks, A stiffness derivative finite element technique for determination of crack tip stress intensity factors, International Journal of Fracture, vol.187, issue.4, pp.487-502, 1974.
DOI : 10.1007/BF00155252

S. Perez, Approche expérimentale et numérique de la fissuration réflective des chaussées, 2008.

C. Petit, Modélisation des milieux composites multicouches fissurés par la mécanique de la rupture, Thèse de Doctorat, 1990.

J. P. Pfeiffer and R. N. Saal, Asphaltic Bitumen as Colloid System., The Journal of Physical Chemistry, vol.44, issue.2, pp.139-149, 1940.
DOI : 10.1021/j150398a001

A. Phan, J. Napier, L. Gray, and T. Kaplan, Stress intensity factor analysis of friction sliding at discontinuity interfaces and junctions, Computational Mechanics, vol.32, issue.4-6, pp.23-392, 2003.
DOI : 10.1007/s00466-003-0505-5

G. Pluvinage, Mécanique élastoplastique de la rupture "Critères d'armorçage, Ed. Cepadues, 1989.

B. Pouteau, Durabilité mécanique du collage blanc sur noir dans les chaussées, Thèse de Doctorat , École doctorale MTGC de Nantes, 2004.

G. Ramond and C. Such, Le module complexe des liants bitumineux, Laboratoire Central des Ponts et Chaussées, vol.32, 1991.

G. Ramond and C. Such, Le module complexe des liants bitumineux, Rapport technique CR32, Laboratoire Centrale des Ponts et Chaussées, 2003.

S. Rao-tangella, J. Craus, J. Deacon, and C. Monismith, Summary report on fatigue response of asphalt mixtures, Tech. rep., Institute of transportation studies, 1990.

J. R. Rice, A Path Independent Integral and the Approximate Analysis of Strain Concentration by Notches and Cracks, Journal of Applied Mechanics, vol.35, issue.2, pp.379-386, 1968.
DOI : 10.1115/1.3601206

J. R. Rice and G. Rosengren, Plane strain deformation near a crack tip in a power-law hardening material, Journal of the Mechanics and Physics of Solids, vol.16, issue.1, pp.1-12, 1968.
DOI : 10.1016/0022-5096(68)90013-6

S. Roth and L. 'essai-de-rupture-locale-répétée-du-bitume, Mise au point du protocole expérimental et premiers résultats, 1997.

G. Rousselier, Ductile fracture models and their potential in local approach of fracture, Nuclear Engineering and Design, vol.105, issue.1, pp.97-111, 1987.
DOI : 10.1016/0029-5493(87)90234-2

T. Rouxel and J. Sangleboeuf, The brittle to ductile transition in a soda???lime???silica glass, Journal of Non-Crystalline Solids, vol.271, issue.3, pp.224-235, 2000.
DOI : 10.1016/S0022-3093(00)00109-5

URL : https://hal.archives-ouvertes.fr/hal-01148247

T. Rouxel, F. Wakai, and S. Sakaguchi, R-Curve Behavior and Stable Crack Growth at Elevated Temperature (1500°-1650° C) in a Si3N4, SiC Nanocomposite Journal of the American Ceramic Society, vol.77, pp.12-3237, 1994.

S. Roy and S. Hesp, Fracture energy and critical crack tip opening displacement, Proceedings of the Canadian Technical Asphalt Association, pp.187-214, 2001.

E. F. Rybicki and M. F. Kanninen, A finite element calculation of stress intensity factors by a modified crack closure integral, Engineering Fracture Mechanics, vol.9, issue.4, pp.931-938, 1977.
DOI : 10.1016/0013-7944(77)90013-3

R. Sanford, Principes of fracture mechanics, 2002.

R. A. Schapery, A theory of crack initiation and growth in viscoelastic media, International Journal of Fracture, vol.27, issue.1, pp.141-159, 1975.
DOI : 10.1007/BF00034721

R. A. Schapery, A theory of crack initiation and growth in viscoelastic media II. approximate methods of analysis, International Journal of Fracture, vol.11, issue.3, pp.369-388, 1975.

R. A. Schapery, A theory of crack initiation and growth in viscoelastic media, International Journal of Fracture, vol.26, issue.4, pp.549-562, 1975.
DOI : 10.1007/BF00116363

M. Shaterzadeh, Étude et modélisation physique et mécanique du comportement viscoélastique et plastique de composites particulaires à matrice polymères, Thèse de Doctorat, Institut National des Sciences Appliquées de Lyon, 1997.

C. Shih, Relationships between the J-integral and the crack opening displacement for stationary and extending cracks, Journal of the Mechanics and Physics of Solids, vol.29, issue.4, pp.305-326, 1981.
DOI : 10.1016/0022-5096(81)90003-X

C. Shih, H. Delorenzi, and W. Andrews, Studies on crack initiation and stable crack growth, Elastic- Plastic Fracture Mechanics, ASTM STP, vol.668, pp.65-120, 1979.

C. Shih, H. Delorenzi, and M. German, Crack extension modeling with singular quadratic isoparametric elements, International Journal of Fracture, vol.16, issue.4, pp.647-651, 1976.
DOI : 10.1016/0022-5096(68)90013-6

K. N. Shivakumar and I. S. Raju, An equivalent domain integral method for three-dimensional mixed-mode fracture problems, Engineering Fracture Mechanics, vol.42, issue.6, pp.935-959, 1992.
DOI : 10.1016/0013-7944(92)90134-Z

K. N. Shivakumar, P. Tan, and J. Newman, A Virtual Crack-Closure Technique for Calculating Stress Intensity Factors for Cracked Three Dimensional Bodies, International Journal of Fracture, vol.36, pp.43-50, 1988.

T. Smith, Dependance of the Ultimate Properties of a GR-S Rubber on Strain Rate and Temperature, pp.99-113, 1958.

C. Stéfani, Étude du phénomène de fatigue dans les matériaux composites bitumieux, Note interne, Laboratoire Centrale des Ponts et Chaussées, 1987.

C. Stéfani, Étude du phénomène de fatigue dans les matériaux composites bitumieux -additif à la note du 25 juin 1987 : Essai de rupture locale répétée du bitume, Note interne, 1988.

C. Stéfani, Fonctions usuelles de la théorie de la viscoélasticité linéaire et leurs relations, 2001.

D. Tracey, Finite Element Solutions for Crack-Tip Behavior in Small-Scale Yielding, Journal of Engineering Materials and Technology, vol.98, issue.2, 1976.
DOI : 10.1115/1.3443357

Q. D. Tran, Modèle simplifié pour les chaussées fissurées multicouches, Thèse de Doctorat, École Nationale des Ponts et Chaussées, 2004.

N. Tschoegl and I. Emri, Generating Line Spectra from Experimental Responses. III. Interconversion between Relaxation and Retardation Behavior, International Journal of Polymeric Materials, vol.18, issue.1-2, pp.117-127, 1992.
DOI : 10.1080/00914039208034818

N. Tschoegl and I. Emri, Generating line spectra from experimental responses. Part II: Storage and loss functions, Rheologica Acta, vol.18, issue.3, pp.322-327, 1993.
DOI : 10.1007/BF00434196

N. Tschoegl, W. Knauss, and I. Emri, Poisson's ratio in linear viscoelasticity-a critical review, Mechanics of Time-Dependent Materials, vol.6, issue.1, pp.3-51, 2002.
DOI : 10.1023/A:1014411503170

V. A. Vainshtok and P. Y. Kravets, Determination of the weight functions and stress intensity factors in polynomial loading of the edges of a normal separation crack in planar and axisymmetric formulation, Strength of Materials, vol.19, issue.No. 1, pp.712-726, 1989.
DOI : 10.1007/BF01531386

A. Van, A general system describing the viscoelastic properties of bitumen and its relation to routine test data, Journal of Applied Chemistry, vol.4, pp.221-236, 1954.

X. Wang and Y. Shen, The energy release rate for linear viscoelastic materials, Acta Mechanica Solida Sinica, vol.7, issue.2, pp.151-164, 1994.

A. Wells, Unstable crack propagation in metals, cleavage and fast fracture. proceedings of the crack propagation symposium, College of Aeronautics, Cranfield UK, pp.210-230, 1961.

A. Wells, Application of fracture mechanics at and beyond general yield, British Welding Research Association Report, vol.10, pp.563-570, 1963.

H. Westergaard, Bearing pressures and cracks, ASME, Journal of Applied Mechanics, vol.6, pp.49-53, 1939.

D. Williams, R. Landel, and J. Ferry, The Temperature Dependence of Relaxation Mechanisms in Amorphous Polymers and Other Glass-forming Liquids, Journal of the American Chemical Society, vol.77, issue.14, pp.3701-3707, 1995.
DOI : 10.1021/ja01619a008

X. Xu and A. Needleman, Numerical simulations of fast crack growth in brittle solids, Journal of the Mechanics and Physics of Solids, vol.42, issue.9, pp.1397-1434, 1994.
DOI : 10.1016/0022-5096(94)90003-5

X. Zhang, Étude numérique de la propagation de fissures par la mécanique de la rupture, Thèse de Doctorat, 1992.