S. N. Al-zubaidy, A proposed design package for centrifugal impellers. Computers and Structures, pp.347-356, 1995.

R. C. Barlier and B. , Mémotech productique conception et dessin. Collection A. Capliez, quatrième édition, ISBN2, pp.7135-1955, 1998.

C. Barlier and B. Poulet, Mémotech Génie mécanique production mécanique. collection A. Capliez, deuxième édition, 1999.

]. S. Bedi, F. Ismail, M. J. Mahjoob, and Y. Chen, Toroidal versus ball nose and flat bottom end mills, The International Journal of Advanced Manufacturing Technology, vol.36, issue.5, pp.326-332, 1997.
DOI : 10.1007/BF01178252

S. Bedi, S. Mann, and C. Menzel, Flank milling with flat end milling cutters. CAD Computer Aided Design, pp.293-300, 2003.

G. S. Bissey, F. Poulachon, and . Lapujoulade, Integration of tool geometry in prediction of cutting forces during milling of hard materials. Mecanique et Industries, pp.391-398, 2005.

. S. Bissey, Développement d'un modèle d'efforts de coupe applicable à des familles d'outils : cas du fraisage des aciers traités thermiquement, Thèse de doctorat, ENSAM de Cluny, 2005.

J. A. Brient, J. Y. Martineau, and . Hascoët, Influence of machining paths on hydro propeller performance, Proceedings of the Institution of Mechanical Engineers, pp.1757-1762, 2003.
DOI : 10.1243/095440503772680686

C. Castagnetti, E. Duc, and P. Ray, The Domain of Admissible Orientation concept: A new method for five-axis tool path optimisation. CAD Computer Aided Design, pp.938-950, 2008.

?. Bibliographie, ?. Cha-08a, ]. J. Chaves-jacob, G. Poulachon, and E. Duc, Nouvelle approche pour l'usinage 5-axes de surfaces réglées non développables par le flanc : mise au point d'outil tonneau, 2008.

G. J. Chaves-jacob, E. Poulachon, and . Duc, Innovative approach for 5- axis flank milling of non-developable ruled surfaces: development of half-barrel cutters, 3rd CIRP International Conference on High Performance Cutting, pp.978-979, 2008.

G. J. Chaves-jacob, E. Poulachon, and . Duc, New method for the flank milling of ruled-surfaces, 2nd International Conference on Computing and Solutions in Manufacturing Engineering, pp.1583-790417, 2008.

. J. Chiou, Accurate tool position for five-axis ruled surface machining by swept envelope approach. CAD Computer Aided Design, pp.967-974, 2004.

. J. Cordebois, Fabrication par usinage. Dunod, deuxième édition, 2008.

J. P. Dépincé and . Hascoët, Active integration of tool deflection effects in end milling. Part 1. Prediction of milled surfaces, International Journal of Machine Tools and Manufacture, vol.469, pp.937-944, 2006.

J. P. Dépincé and . Hascoët, Active integration of tool deflection effects in end milling. Part 2. Compensation of tool deflection, International Journal of Machine Tools and Manufacture, vol.469, pp.945-956, 2006.

]. E. Duc, Usinage des formes gauches, contribution à l'amélioration de la qualité des trajectoires d'usinage, Thèse de Doctorat, ENS de Cachan, 1998.

]. E. Duc, C. Lartigue, C. Tournier, and P. Bourdet, New concept for the design and the manufacturing of free-form surfaces: the machining surface. CIRP Annals -Manufacturing Technology, pp.103-106, 1999.

A. Dugas, J. J. Lee, and J. Y. Hascoët, An enhanced machining simulator with tool deflection error analysis, Journal of Manufacturing Systems, vol.21, issue.6, pp.451-463, 2002.
DOI : 10.1016/S0278-6125(02)80051-6

G. Elber and R. Fish, 5-Axis Freeform Surface Milling Using Piecewise Ruled Surface Approximation, Journal of Manufacturing Science and Engineering, vol.119, issue.3, pp.383-387, 1997.
DOI : 10.1115/1.2831117

?. Bibliographie, ?. O. Ezu-02-]-e, J. Ezugwu, Y. Bonney, and . Yamane, An overview of the machinability of aeroengine alloys, Journal of Materials Processing Technology, vol.134, issue.2, pp.233-253, 2003.

Y. W. Ferry and . Altintas, Virtual five-axis flank milling of jet engine impellers -Part I: Mechanics of five-axis flank milling, 2008.

Y. W. Ferry and . Altintas, Virtual Five-Axis Flank Milling of Jet Engine Impellers???Part II: Feed Rate Optimization of Five-Axis Flank Milling, Journal of Manufacturing Science and Engineering, vol.130, issue.1, 2008.
DOI : 10.1115/1.2815340

H. Gong, L. X. Cao, and J. Liu, Improved positioning of cylindrical cutter for flank milling ruled surfaces. CAD Computer Aided Design, pp.1205-1213, 2005.

Z. Han, D. C. Yang, and J. J. Chuang, Isophote-based ruled surface approximation of free-form surfaces and its application in NC machining, International Journal of Production Research, vol.39, issue.9, pp.1911-1930, 2001.
DOI : 10.1080/00207540110024663

C. S. Jun, K. Cha, and Y. S. Lee, Optimizing tool orientations for 5-axis machining by configuration-space search method. CAD Computer Aided Design, pp.549-566, 2003.

. A. Kli-82-]-w, R. E. Kline, J. R. Devor, and . Lindberg, The prediction of cutting forces in end milling with application to cornering cuts, International Journal of Machine Tool Design and Research, vol.22, issue.1, pp.7-22, 1982.

P. J. Kopac and . Krajnik, Robust design of flank milling parameters based on grey-Taguchi method, Journal of Materials Processing Technology, vol.191, issue.1-3, pp.1-3400, 2007.
DOI : 10.1016/j.jmatprotec.2007.03.051

Y. Landon, S. Segonds, P. Lascoumes, and P. Lagarrigue, Tool positioning error (TPE) characterisation in milling, International Journal of Machine Tools and Manufacture, vol.44, issue.5, pp.457-464, 2004.
DOI : 10.1016/j.ijmachtools.2003.12.001

E. C. Lartigue, A. Duc, and . Affouard, Tool path deformation in 5-axis flank milling using envelope surface. CAD Computer Aided Design, pp.375-382, 2003.

B. A. Larue and . Anselmetti, Deviation of a machined surface in flank milling, International Journal of Machine Tools and Manufacture, vol.43, issue.2, pp.129-138, 2003.
DOI : 10.1016/S0890-6955(02)00189-X

URL : https://hal.archives-ouvertes.fr/hal-00098366

?. Bibliographie, ?. S. Lavernhe, C. Tournier, and C. Lartigue, Kinematical performance prediction in multi-axis machining for process planning optimization, International Journal of Advanced Manufacturing Technology, vol.37, pp.5-6534, 2008.

. W. Liu-95-]-x and . Liu, Five-axis NC cylindrical milling of sculptured surfaces. Computer- Aided Design, pp.887-894, 1995.

L. N. López, A. De-lacalle, J. Lamikiz, J. A. Muñoa, and . Sánchez, The CAM as the centre of gravity of the five-axis high speed milling of complex parts, International Journal of Production Research, vol.4310, pp.1983-1999, 2005.

L. N. López, A. De-lacalle, J. A. Lamikiz, M. A. Sánchez, and . Salgado, Toolpath selection based on the minimum deflection cutting forces in the programming of complex surfaces milling, International Journal of Machine Tools and Manufacture, vol.47, issue.2, pp.388-400, 2007.
DOI : 10.1016/j.ijmachtools.2006.03.010

C. Menzel, S. Bedi, and S. Mann, Triple tangent flank milling of ruled surfaces. CAD Computer Aided Design, pp.289-296, 2004.

F. Monies, Positionnements hors interférence pour l'usinage en bout et en roulant de formes gauches, Thèse de doctorat, 2001.

. Y. Pec-09a-]-p, C. Pechard, C. Tournier, J. P. Lartigue, and . Lugarini, Geometrical deviations versus smoothness in 5-axis high-speed flank milling, International Journal of Machine Tools and Manufacture, vol.496, pp.454-461, 2009.

. Y. Pec-09b-]-p and . Pechard, Génération de trajectoires d'usinage grande vitesse 5 axes par flanc d'outil : intégration d'un critère de fluidité, Thèse de doctorat, 2009.

M. Peternell, H. Pottmann, and B. Ravani, On the computational geometry of ruled surfaces. CAD Computer Aided Design, pp.17-32, 1999.

W. R. Qi, H. Liu, L. Bian, and . Li, Five-axis rough machining for impellers. Frontiers of Mechanical Engineering in China, pp.71-76, 2009.

Y. Quinsat, L. Sabourin, and C. Lartigue, Surface topography in ball end milling process: Description of a 3D surface roughness parameter, Journal of Materials Processing Technology, vol.195, issue.1-3, pp.1-3135, 2008.
DOI : 10.1016/j.jmatprotec.2007.04.129

URL : https://hal.archives-ouvertes.fr/hal-01154042

W. J. Redonnet, G. Rubio, and . Dessein, Side milling of ruled surfaces: Optimum positioning of the milling cutter and calculation of interference, The International Journal of Advanced Manufacturing Technology, vol.119, issue.3, pp.459-465, 1998.
DOI : 10.1007/BF01351391

URL : https://hal.archives-ouvertes.fr/hal-01017618

?. Bibliographie and ?. J. Redonnet, Étude globale du positionnement d'un outil pour l'usinage de surfaces gauches sur machines cinq axes et génération de trajectoires, Thèse de doctorat, 1999.

F. Rehsteiner and H. J. Renker, Collision-Free Five-Axis Milling of Twisted Ruled Surfaces. CIRP Annals -Manufacturing Technology, pp.457-461, 1993.

. J. Rolland, Modélisation des écoulements cavitants dans les inducteurs de turbopompes : prise en compte des effets thermodynamiques, 2008.

]. W. Rubio, Génération de trajectoires du centre de l'outil pour l'usinage de surfaces complexes sur machines à trois et cinq axes, Thèse de doctorat, 1993.

W. Rubio, P. Lagarrigue, G. Dessein, and F. Pastor, Calculation of tool paths for a torus mill on free-form surfaces on five-axis machines with detection and elimination of interference, The International Journal of Advanced Manufacturing Technology, vol.20, issue.6, pp.13-20, 1998.
DOI : 10.1007/BF01179412

]. J. Sen-07 and . Senatore, Analyse qualitative des paramètres influents pour la planification des trajectoires sur surfaces gauches, Thèse de Doctorat, 2007.

]. J. Sen-08, Y. Senatore, W. Landon, and . Rubio, Analytical estimation of error in flank milling of ruled surfaces. CAD Computer Aided Design, pp.595-603, 2008.

K. K. Sorby, J. E. Tonnessen, and . Torjusen, Improving high speed flank milling operations in multi-axis machines. CIRP Annals -Manufacturing Technology, pp.371-374, 2000.

S. Suh, J. Cho, and J. Y. Hascoet, Incorporation of tool deflection in tool path computation: Simulation and analysis, Journal of Manufacturing Systems, vol.15, issue.3, pp.190-199, 1996.
DOI : 10.1016/0278-6125(96)89571-9

J. Taille, Courbes et surfaces. Collection que sais-je ?, quatrième édition, 1975.

?. Bibliographie, ?. K. Tön-01-]-h, C. Tönshoff, N. Gey, and . Rackow, Flank milling optimization -the flamingo project. Air & Space Europe, pp.3-460, 2001.

C. Tournier and E. Duc, A surface based approach for constant scallop height tool-path generation, International Journal of Advanced Manufacturing Technology, vol.195, pp.318-324, 2002.
URL : https://hal.archives-ouvertes.fr/hal-01076666

C. Tournier and E. Duc, Iso-scallop tool path generation in 5-axis milling, The International Journal of Advanced Manufacturing Technology, vol.29, issue.9-10, pp.9-10867, 2005.
DOI : 10.1007/s00170-003-2054-7

URL : https://hal.archives-ouvertes.fr/hal-01076659

N. Wang and K. Tang, Automatic generation of gouge-free and angularvelocity-compliant five-axis toolpath. Computer-Aided Design, pp.841-852, 2007.

. Y. Wu-95-]-c and . Wu, Arbitrary surface flank milling of fan, compressor, and impeller blades, ASME paper, 1994.

H. T. Young and L. C. Chuang, An Integrated Machining Approach for a Centrifugal Impeller, The International Journal of Advanced Manufacturing Technology, vol.21, issue.8, pp.556-563, 2003.
DOI : 10.1007/s00170-002-1382-3

H. T. Young, L. C. Chuang, K. Gerschwiler, and S. Kamps, A five-axis rough machining approach for a centrifugal impeller, The International Journal of Advanced Manufacturing Technology, vol.23, issue.3-4, pp.3-4233, 2004.
DOI : 10.1007/s00170-003-1677-z