M. Hillion, H. Buhlbuck, J. Chauvin, and N. Petit, Combustion Control of Diesel Engines Using Injection Timing, SAE Technical Paper Series, 2009.
DOI : 10.4271/2009-01-0367
URL : https://hal.archives-ouvertes.fr/hal-00486069

M. Hillion, J. Chauvin, O. Grondin, and N. Petit, Active Combustion Control of Diesel HCCI Engine: Combustion Timing, SAE Technical Paper Series, 2008.
DOI : 10.4271/2008-01-0984
URL : https://hal.archives-ouvertes.fr/hal-00473255

M. Hillion, J. Chauvin, and N. Petit, Controlling the start of combustion on an HCCI diesel engine, 2008 American Control Conference, 2008.
DOI : 10.1109/ACC.2008.4586800

M. Hillion, J. Chauvin, and N. Petit, Open-loop combustion timing control of a Spark-Ignited engine, 2008 47th IEEE Conference on Decision and Control, 2008.
DOI : 10.1109/CDC.2008.4739262

M. Hillion, J. Chauvin, and N. Petit, Combustion control of an HCCI diesel engine with cool flame phenomenon, Proc. of the European Conference on Control, 2009.
URL : https://hal.archives-ouvertes.fr/hal-00485782

M. Hillion, J. Chauvin, and N. Petit, Combustion control in internal combustion engines, IEEE Control Sytem Technology

M. Hillion, J. Chauvin, and N. Petit, Control of highly diluted combustion in Diesel engines, Control Engineering Practice, vol.19, issue.11
DOI : 10.1016/j.conengprac.2011.06.006
URL : https://hal.archives-ouvertes.fr/hal-00639013

M. Hillion and J. Chauvin, Méthode de contrôle actif de la combustion d'un moteuràmoteurà allumage par compression, 2008.

M. Hillion and J. Chauvin, Méthode de contrôle actif de la combustion d'un moteuràmoteurà allumage commandé, US Application Number), vol.641, pp.12-542, 2008.

M. Hillion and J. Chauvin, Procédé de contrôle de combustion d'un moteur Diesel, p.142261, 2008.

F. Agrell, H. Angström, B. Eriksson, J. Wikander, and J. Linderyd, Transient Control of HCCI Through Combined Intake and Exhaust Valve Actuation, SAE Technical Paper Series
DOI : 10.4271/2003-01-3172

A. Aldawood, S. Mosbach, and M. Kraft, HCCI Combustion Phasing Transient Control by Hydrogen-Rich Gas: Investigation Using a Fast Detailed-Chemistry Full-Cycle Model, SAE Technical Paper Series, 1134.
DOI : 10.4271/2009-01-1134

I. Andersson, T. Mckelvey, and M. Thor, Evaluation of a closec loop spark advance controller based on a torque sensor, Proc. of the Society of Automotive Engineering World Congress, pp.2008-2009, 2008.

P. Andersson, Air Charge Estimation in Turbocharged Spark Ignition Engines, 2005.

W. J. Annand and T. H. Ma, Instantaneous heat transfer rates to the cylinder head surface of a small compression???ignition engine, ARCHIVE: Proceedings of the Institution of Mechanical Engineers 1847-1982 (vols 1-196), vol.185, issue.1970, 1970.
DOI : 10.1243/PIME_PROC_1970_185_110_02

C. Barba, C. Burkhardt, K. Boulouchos, and M. Bargende, A Phenomenological Combustion Model for Heat Release Rate Prediction in High-Speed DI Diesel Engines with Common Rail Injection, SAE Technical Paper Series, 2000.
DOI : 10.4271/2000-01-2933

D. Brand, C. H. Onder, and L. Guzzella, Estimation of the Instantaneous In-Cylinder Pressure for Control Purposes using Crankshaft Angular Velocity, SAE Technical Paper Series, 2005.
DOI : 10.4271/2005-01-0228

K. Chang, G. A. Lavoie, and A. Babajimopoulos, Control of a Multi-Cylinder HCCI Engine During Transient Operation by Modulating Residual Gas Fraction to Compensate for Wall Temperature Effects, SAE Technical Paper Series, 2007.
DOI : 10.4271/2007-01-0204

J. Chauvin, G. Corde, and N. Petit, Transient control of a Diesel engine airpath, 2007 American Control Conference, 2007.
DOI : 10.1109/ACC.2007.4282942
URL : https://hal.archives-ouvertes.fr/hal-00575130

C. J. Chiang, A. G. Stefanopoulou, and M. Jankovic, Nonlinear observerbased control of load transitions in Homogeneous Charge Compression Ignition engines, IEEE Transaction on Control System Technology, pp.438-448, 2007.

F. G. Chmela and G. C. Orthaber, Rate of heat release prediction for direct injection Diesel engines based on purely mixing controlled conditions, Proc. of the Society of Automotive Engineering World Congress, pp.1999-2000, 1999.

J. S. Citron, J. E. Higgins, and L. Y. Chen, Cylinder by Cylinder Engine Pressure and Pressure Torque Waveform Determination Utilizing Speed Fluctuations, SAE Technical Paper Series, 1989.
DOI : 10.4271/890486

J. Damitz, R. Fehrmann, M. Schueler, M. Kessler, M. Youssef et al., Method and device for contolling an internal combustion engine, 2006.

C. F. Daniels, G. G. Zhu, and J. Winkelman, Inaudible knock and partialburn detection using in-cylinder ionization signal, Proc. of the Society of Automotive Engineering World Congress, 2003.

L. Eriksson, Spark advance for optimal efficiency, SAE Technical Paper Series, 1999.
DOI : 10.4271/1999-01-0548

L. Eriksson, L. Nielsen, and M. Glavenius, Closed Loop Ignition Control by Ionization Current Interpretation, SAE Technical Paper Series, pp.1216-1223, 1997.
DOI : 10.4271/970854

J. M. Frias, C. M. Aceves, D. Flowers, and J. R. Smith, HCCI engine control by thermal management, Proc. of the Society of Automotive Engineering World Congress, 2000.

L. Guzzella, M. Simons, and H. P. Geering, Feedback linearizing air/fuelratio controller, Control Eng. Practice, pp.1101-1105, 1997.

J. K. Hale, Ordinary Differential Equation, 1980.

G. Haraldsson, P. Tunestål, B. Johansson, and J. Hyvonen, HCCI combustion phasing with closed-loop combustion control using variable compression BIBLIOGRAPHY ratio in a multi cylinder engine, Proc. of the Society of Automotive Engineering World Congress, 1830.

G. Haraldsson, P. Tunestål, B. Johansson, and J. Hyvonen, HCCI closedloop combustion control using fast thermal management, Proc. of the Society of Automotive Engineering World Congress, 2004.
DOI : 10.4271/2004-01-0943
URL : http://lup.lub.lu.se/record/163610/file/625775.pdf

J. Heywood, Internal combustion engine fundamental, 1988.

M. Hillion and J. Chauvin, Méthode de contrôle actif de la combustion d'un moteuràmoteurà allumage commandé, pp.12-542, 2008.

M. Hillion and J. Chauvin, Méthode de contrôle actif de la combustion d'un moteuràmoteurà allumage par compression, p.58, 2008.

M. Hillion and J. Chauvin, Procédé de contrôle de combustion d'un moteur Diesel, p.142261, 2008.

M. Hillion, J. Chauvin, and N. Petit, Controlling the start of combustion on an HCCI diesel engine, 2008 American Control Conference, 2008.
DOI : 10.1109/ACC.2008.4586800

M. Hillion, J. Chauvin, and N. Petit, Open-loop combustion timing control of a Spark-Ignited engine, 2008 47th IEEE Conference on Decision and Control, 2008.
DOI : 10.1109/CDC.2008.4739262

M. Hillion, J. Chauvin, and N. Petit, Combustion control in internal combustion engines, IEEE Control Sytem Technology

P. Hochstrasser, C. Sauer, G. Esteghlal, J. Schlemann, G. Mallebrein et al., Method, device and computer programme for controlling an internal combustion engine, 2004.

G. F. Hohenberg, Acdvanced approaches for heat transfer calculation, Society of Automotive Engineering, number 790825, 1979.

M. Jankovic, F. Frischmuth, A. Stefanopoulou, and J. Cook, Torque management of engines with variable cam timing, Control Systems Magazine, IEEE, pp.34-42, 1998.
DOI : 10.1109/37.722251

M. Järgenstedt, Detection of the start of combustion using knock sensor signals, 2000.

T. Kailath, Linear systems, 1980.

F. Lafossas, O. Colin, F. L. Berr, and P. Menegazzi, Application of a New 1D Combustion Model to Gasoline Transient Engine Operation, SAE Technical Paper Series, 2005.
DOI : 10.4271/2005-01-2107

F. Lafossas, M. Marbaix, and P. Menegazzi, Development and Application of a 0D D.I. Diesel combustion model for Emissions Prediction, SAE Technical Paper Series, 1841.
DOI : 10.4271/2007-01-1841

F. , L. Berr, M. Miche, G. L. Solliec, F. Lafossas et al., Modelling of a turbocharged SI engine with variable camshaft timing for engine control purposes, Proc. of the Society of Automotive Engineering World Congress, 2006.

B. Lecointe and G. Monnier, Downsizing a Gasoline Engine Using Turbocharging with Direct Injection, SAE Technical Paper Series, 2003.
DOI : 10.4271/2003-01-0542

O. Lepreux, Model-based temperature control of a diesel oxidation catalyst, Journal of Process Control, vol.22, issue.1, 2009.
DOI : 10.1016/j.jprocont.2011.10.012
URL : https://hal.archives-ouvertes.fr/hal-00661530

T. Leroy, G. Alix, A. Duparchy, and F. L. Berr, Modeling fresh air charge and residual gas fraction on a dual independant variable valve timing SI engine, Proc. of the Society of Automotive Engineering World Congress-cylinder Burned Gas Rate Estimation and Control on VVA Diesel Engines Proc. of Society of Automotive Engineering Conference, 2008.

T. Leroy, J. Chauvin, and N. Petit, Controlling air and burned gas masses of turbocharged VVT SI engines, 2008 47th IEEE Conference on Decision and Control, 2008.
DOI : 10.1109/CDC.2008.4739186

T. Leroy, J. Chauvin, N. Petit, and G. Corde, MOTION PLANNING CONTROL OF THE AIRPATH OF AN S.I. ENGINE WITH VALVE TIMING ACTUATORS, Proc. of the 5 ? IFAC symposium on Advances in Automotive Control, 2007.
DOI : 10.3182/20070820-3-US-2918.00083

J. Livengood and P. Wu, Correlation of auto-ignition phenomena in internal combustion engines and rapid compression machine, Fifth International Symposium on Combustion, pp.347-356, 1955.

S. Magand, E. Watel, M. Castagné, D. Soleri, O. Grondin et al., Optimization of a low NOx emission HCCI Diesel prototype vehicle, Thiesel, Conference on Thermo-and Fluid Dynamic Processes in Diesel Engines, 2008.

M. Metghalchi and J. C. Keck, Burning velocities of mixture of air with methanol iso-octane and indolene at high pressure and temperature, Combust. Flame, pp.191-210, 1982.

S. Nakayama, T. Ibuki, H. Hosaki, and H. Tominaga, An Application of Model Based Combustion Control to Transient Cycle-by-Cycle Diesel Combustion, Proc. of the Society of Automotive Engineering World Congress, 1311.
DOI : 10.4271/2008-01-1311

E. Nguyen, L. Duval, O. Grondin, and J. Antoni, Engine combustion indicators from block vibrations using bayesian inference, International Conference on Noise & Vibration Engineering, 2008.

J. Olsson, P. Tunestål, and B. Johansson, Closed-Loop Control of an HCCI Engine, SAE Technical Paper Series, 1031.
DOI : 10.4271/2001-01-1031

J. Popp and C. Rutland, Model-based feed-forward control of Diesel HCCI en transients, Proc. of the Society of Automotive Engineering World Congress, 2009.

D. J. Powell, Engine Control Using Cylinder Pressure: Past, Present, and Future, Journal of Dynamic Systems, Measurement, and Control, vol.115, issue.2B, pp.343-350, 1993.
DOI : 10.1115/1.2899074

N. Ravi, M. J. Roelle, A. F. Jungkunz, and J. C. Gerdes, MODEL BASED CONTROL OF EXHAUST RECOMPRESSION HCCI, the Fifth IFAC Symposium on Advances in Automotive Control, pp.7-084, 2007.
DOI : 10.3182/20070820-3-US-2918.00041

B. Reveille, M. Miche, S. Jay, and S. Henriot, Contribution of 3D CFD tools to the development and understanding of Diesel engines: improving today's engines and designing tomorrow's power unit, Congrès le Diesel, 2004.

D. Schiefer, R. Maennel, and W. Nardoni, Advantages of Diesel Engine Control Using In-Cylinder Pressure Information for Closed Loop Control, SAE Technical Paper Series, 2003.
DOI : 10.4271/2003-01-0364

L. Schwartz, Calcul différentiel etéquationsetéquations différentielles, 1997.

M. C. Sellnau, F. A. Matekunas, P. A. Battiston, C. Chang, and D. R. Lancaster, Cylinder-Pressure-Based Engine Control Using Pressure-Ratio-Management and Low-Cost Non-Intrusive Cylinder Pressure Sensors, SAE Technical Paper Series, 2000.
DOI : 10.4271/2000-01-0932

A. Stefanopoulou and I. Kolmanovsky, Analysis and control of transient torque response in engines with internal exhaust gas recirculation, IEEE Transactions on Control Systems Technology, vol.7, issue.5, pp.555-566, 1999.
DOI : 10.1109/87.784419

K. Swan, M. Shahbakhti, and C. R. Koch, Predicting Start of Combustion Using a Modified Knock Integral Method for an HCCI Engine, SAE Technical Paper Series, 1086.
DOI : 10.4271/2006-01-1086

A. Torregrosa, P. Olmeda, B. Degraeuwe, and M. Reyes, A concise wall temperature model for DI Diesel engines, Applied Thermal Engineering, vol.26, issue.11-12, pp.1320-1327, 2006.
DOI : 10.1016/j.applthermaleng.2005.10.021

T. Tseng and W. K. Cheng, An Adaptive Air/Fuel Ratio Controller for SI Engine Throttle Transients, SAE Technical Paper Series, 1999.
DOI : 10.4271/1999-01-0552

M. J. Van-nieuwstadt, I. Kolmanovsky, P. Moraal, A. G. Stefanopoulou, and M. Jankovic, EGR-VGT control schemes: experimental comparison for a high-speed diesel engine, Control System Magazine, pp.63-79, 2000.
DOI : 10.1109/37.845039

]. B. Walter and B. Gatellier, Near Zero NOx Emissions and High Fuel Efficiency Diesel Engine: the Naditm Concept Using Dual Mode Combustion, Oil and Gas Science and Technology, pp.101-114, 2003.
DOI : 10.2516/ogst:2003007

A. Widd, K. Ekholm, P. Tunestål, and R. Johansson, Experimental evaluation of predictive combustion phasing control in an HCCI engine using fast thermal management and VVA, 2009 IEEE International Conference on Control Applications, 2009.
DOI : 10.1109/CCA.2009.5281087

I. I. Wiebe, Brennverlauf und kreisprozessrechnung von verbrennungsmotoren, VEB Verlag Technik Berlin, 1970.

C. Wilhelmsson, A. Vressner, P. Tunestål, B. Johansson, G. Särner et al., Combustion Chamber Wall Temperature Measurement and Modeling During Transient HCCI Operation, SAE Technical Paper Series, pp.2005-2006, 2005.
DOI : 10.4271/2005-01-3731

G. Woschni, A Universally Applicable Equation for the Instantaneous Heat Transfer Coefficient in the Internal Combustion Engine, SAE Technical Paper Series, p.670931, 1967.
DOI : 10.4271/670931

P. Yoon, S. Park, M. Sunwoo, I. Ohm, and K. J. Yoon, Closed-Loop Control of Spark Advance and Air-Fuel Ratio in SI Engines Using Cylinder Pressure, SAE Technical Paper Series
DOI : 10.4271/2000-01-0933

G. G. Zhu, C. F. Daniels, and J. Winkelman, MBT Timing Detection and its Closed-Loop Control Using In-Cylinder Pressure Signal, SAE Technical Paper Series, pp.2003-2004, 2003.
DOI : 10.4271/2003-01-3266