. E. Bibliographie-[-abele2008-], R. Abele, J. Hölscher, and . Hohenstein, Methodology for evaluation of centrifugal force resistance of HSC-tools by analyzing tool body deformation and cutting edge offset. CIRP Annals -Manufacturing Technology, pp.117-120, 2008.

S. [. Albrecht, Y. Park, G. Altintas, and . Pritschow, High frequency bandwidth cutting force measurement in milling using capacitance displacement sensors, International Journal of Machine Tools and Manufacture, vol.45, issue.9, pp.993-1008, 2005.
DOI : 10.1016/j.ijmachtools.2004.11.028

E. [. Altintas and . Budak, Analytical Prediction of Stability Lobes in Milling. CIRP Annals -Manufacturing Technology, pp.357-362, 1995.

S. [. Altintas, E. Engin, and . Budak, Analytical Stability Prediction and Design of Variable Pitch Cutters, Journal of Manufacturing Science and Engineering, vol.121, issue.2, pp.173-178, 1999.
DOI : 10.1115/1.2831201

. [. Altintas, Manufacturing Automation: Metal Cutting Mechanics, Machine Tool Vibrations and CNC Design, Cambridge, 2000.
DOI : 10.1017/CBO9780511843723

M. [. Altintas, H. Eynian, and . Onozuka, Identification of dynamic cutting force coefficients and chatter stability with process damping. CIRP Annals - Manufacturing Technology, pp.371-374, 2008.

F. [. Arizmendi, J. Campa, and . Fernández, Model for surface topography prediction in peripheral milling considering tool vibration. CIRP Annals - Manufacturing Technology, pp.93-96, 2009.

. [. Arnold, The mechanism of tool vibration in the cutting of steel, Proceedings of the Institute of Mechanical Engineers, p.154, 1946.
DOI : 10.1243/PIME_PROC_1946_154_037_02

T. [. Bayly, G. Schmitz, B. P. Stepan, D. A. Mann, T. Peters et al., Effects of Radial Immersion and Cutting Direction on Chatter Instability in End-Milling, Manufacturing, 2002.
DOI : 10.1115/IMECE2002-39116

O. [. Bravo, L. N. Altuzarra, J. A. López-de-lacalle, F. J. Sánchez, and . Campa, Stability limits of milling considering the flexibility of the workpiece and the machine, International Journal of Machine Tools and Manufacture, vol.45, issue.15, pp.1669-1680, 2005.
DOI : 10.1016/j.ijmachtools.2005.03.004

D. [. Byrne, I. Dornfeld, G. Inasaki, W. Ketteler, R. König et al., Tool Condition Monitoring (TCM) ? The Status of Research and Industrial Application. CIRP Annals -Manufacturing Technology, pp.541-567, 1995.

Y. [. Campomanes and . Altintas, An Improved Time Domain Simulation for Dynamic Milling at Small Radial Immersions, Journal of Manufacturing Science and Engineering, vol.125, issue.3, pp.416-422, 2003.
DOI : 10.1115/1.1580852

J. [. Chang, I. H. Kim, D. Y. Kim, D. C. Jang, and . Han, In-process surface roughness prediction using displacement signals from spindle motion, International Journal of Machine Tools and Manufacture, vol.47, issue.6, pp.1021-1026, 2007.
DOI : 10.1016/j.ijmachtools.2006.07.004

]. J. Charron2003a and . Charron, Mesures sans contact -Généralités. Techniques de l'ingénieur, pp.1-4, 2003.

]. J. Charron2003b and . Charron, Mesures sans contact -Méthodes magnétiques et capacitives. Techniques de l'ingénieur, pp.1-10, 2003.

]. J. Charron2004a and . Charron, Mesures sans contact -Méthodes optiques (Partie1) Techniques de l'ingénieur, pp.1-16, 2004.

]. J. Charron2004b and . Charron, Mesures sans contact -Autres méthodes. Techniques de l'ingénieur, pp.1-16, 2004.

]. J. Charron2004c and . Charron, Mesures sans contact -Méthodes optiques (Partie2) Techniques de l'ingénieur, pp.1-19, 2004.

. J. Charron2005-] and . Charron, Mesures sans contact. Techniques de l'ingénieur, pp.1-8, 2005.

Y. [. Choi and . Shin, On-Line Chatter Detection Using Wavelet-Based Parameter Estimation, Journal of Manufacturing Science and Engineering, vol.125, issue.1, pp.21-28, 2003.
DOI : 10.1115/1.1531113

]. S. Choudhury1995a, S. Choudhury, and . Ramesh, On-line tool wear sensing and compensation in turning, Journal of Materials Processing Technology, vol.49, issue.3-4, pp.3-4247, 1995.
DOI : 10.1016/0924-0136(94)01350-A

]. S. Choudhury1995b, M. S. Choudhury, and . Sharath, On-line control of machine tool vibration during turning operation, Journal of Materials Processing Technology, vol.47, pp.3-4251, 1995.

P. [. Coffignal, J. Lorong, S. Planchat, A. Yaqub, and . Larue, Virtual Machining: a General Approach to Deal with Flexible Workpieces. 10th CIRP International Workshop on Modeling of Machining Operations 10th CIRP International Workshop on Modeling of Machining Operations, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00283241

. [. Corduan, Etude des phénomènes vibratoires en fraisage de finition de plaques minces : Application aux aubages de turbines aéronautiques, 2006.

. J. Costes2008-], V. Costes, and . Moreau, Displacements measurements in a milling operation: application to the prediction of the surface profile. 9 th Cairo University Conference on Mechanical Design and Production, 2008.

. [. Crolet, Contribution à l'étude de l'influence du comportement vibratoire du système "pièce-outil-machine" sur la qualité de surface obtenue en tournage de superfinition, 2008.

B. [. Davies, J. R. Dutterer, A. J. Pratt, J. B. Schaut, and . Bryan, On the Dynamics of High-Speed Milling with Long, Slender Endmills. CIRP Annals - Manufacturing Technology, pp.55-60, 1998.

J. [. Davies, B. S. Pratt, T. J. Dutterer, and . Burns, The Stability of Low Radial Immersion Milling. CIRP Annals -Manufacturing Technology, pp.37-40, 2000.

D. [. Denkena, C. Boehnke, R. Spille, and . Dragon, In-process information storage on surfaces by turning operations. CIRP Annals -Manufacturing Technology, pp.85-88, 2008.

D. [. Devillez and . Dudzinski, Tool vibration detection with eddy current sensors in machining process and computation of stability lobes using fuzzy classifiers. Mechanical Systems and Signal Processing, pp.441-456, 2007.

. [. Durand, Capteurs de déplacement. Techniques de l'ingénieur, pp.1-20, 2002.

S. [. Ehmann, R. E. Kapoor, I. Devor, and . Lazoglu, Machining Process Modeling: A Review, Journal of Manufacturing Science and Engineering, vol.119, issue.4B, pp.4-655, 1997.
DOI : 10.1115/1.2836805

T. [. Enk and . Surmann, Analysis of the Cutting Tool Vibration while Milling with Changing Engagement Conditions. 9th CIRP International Workshop on Modeling of Machining Operations, 2006.

. L. Franco-gasca2008-], R. Franco-gasca, G. De-jesús-romero-troncoso, R. Herrera-ruiz, and . Del-rocío-peniche-vera, Reconfigurable filtering system for sensorless signal acquisition in machining processes, The International Journal of Advanced Manufacturing Technology, vol.32, issue.4, pp.1-2102, 2008.
DOI : 10.1007/s00170-007-1081-1

B. [. Gagnol, P. Bouzgarrou, C. Ray, and . Barra, Model-based chatter stability prediction for high-speed spindles, International Journal of Machine Tools and Manufacture, vol.47, issue.7-8, pp.7-81176, 2007.
DOI : 10.1016/j.ijmachtools.2006.09.002

. [. Gagnol, Modélisation du comportement dynamique des électrobroches UGV, 2006.

M. [. Giraudeau and . Mansori, La réponse en fréquence comme signature d'usinabilité. 4eme Conférence Internationale Conception et Production Intégrées, 2005.

. J. Gradisek2002-], I. Gradisek, S. Grabec, R. Siegert, and . Friedrich, Stochastic dynamics of metal cutting: bifurcation phenomena in turning. Mechanical Systems and Signal Processing, pp.831-840, 2002.

*. J. Gradi?ek2005+, M. Gradi?ek, T. Kalveram, and . Insperger, On stability prediction for milling, International Journal of Machine Tools and Manufacture, vol.45, issue.7-8, pp.7-8769, 2005.
DOI : 10.1016/j.ijmachtools.2004.11.015

. J. Grazeviciute2008-], V. Grazeviciute, V. Gyliene, and . Ostasevicius, Simulation of Mill Dynamics and it's Influence on Surface Quality, 2nd International Conference « Innovative Cutting Processes & Smart Machining », 2008.

B. [. Harms, N. Denkena, and . Lhermet, Tool adaptator for active vibration control in turning operations, 9th International Conference on New Actuators, 2004.

]. H. Herlufsen1984a and . Herlufsen, Dual Channel FFT Analysis (Part 1) Bruël-Kjaer Technical review Bruël-Kjaer Technical review. 1984b, . Stability of the milling process, HERLUFSEN. Dual Channel FFT Analysis Periodica Polytechnica, Mechanical Engineering, vol.44, issue.21, pp.47-57, 1984.

G. [. Insperger and . Stépán, Semi-discretization method for delayed systems, International Journal for Numerical Methods in Engineering, vol.33, issue.1, pp.503-518, 2002.
DOI : 10.1002/nme.505

]. T. Insperger2003a, B. P. Insperger, G. Mann, P. V. Stépán, and . Bayly, Stability of up-milling and down-milling, part 1: alternative analytical methods, International Journal of Machine Tools and Manufacture, vol.43, issue.1, pp.25-34, 2003.
DOI : 10.1016/S0890-6955(02)00159-1

]. T. Insperger2003b, G. Insperger, P. V. Stépán, B. P. Bayly, and . Mann, Multiple chatter frequencies in milling processes, Journal of Sound and Vibration, vol.262, issue.2, pp.333-345, 2003.
DOI : 10.1016/S0022-460X(02)01131-8

G. [. Insperger and . Stéfán, Stability Analysis of Turning With Periodic Spindle Speed Modulation Via Semidiscretization, Journal of Vibration and Control, vol.10, issue.12, pp.1835-1855, 2004.
DOI : 10.1177/1077546304044891

Y. [. Jang, H. Choi, A. Kim, and . Hsiao, Study of the correlation between surface roughness and cutting vibrations to develop an on-line roughness measuring technique in hard turning, International Journal of Machine Tools and Manufacture, vol.36, issue.4, pp.453-464, 1996.
DOI : 10.1016/0890-6955(95)00074-7

D. [. Jeong, D. Y. Kim, and . Jang, Real time monitoring and diagnosis system development in turning through measuring a roundness error based on three-point method, International Journal of Machine Tools and Manufacture, vol.45, issue.12-13, pp.12-131494, 2005.
DOI : 10.1016/j.ijmachtools.2005.01.022

X. [. Jiang, G. Long, and . Meng, Study of the correlation between surface generation and cutting vibrations in peripheral milling, Journal of Materials Processing Technology, vol.208, issue.1-3, pp.1-3229, 2008.
DOI : 10.1016/j.jmatprotec.2007.12.127

P. [. Kelly, G. Young, and . Byrne, Modelling the influence of machining dynamics on surface topography in turning, International Journal of Mechanical Sciences, vol.41, issue.4-5, pp.4-5507, 1999.
DOI : 10.1016/S0020-7403(98)00079-4

[. Kim, S. -. Kim, K. -. Lee, D. Lee, Y. -. Bang et al., Development of a programmable vibration cutting tool for diamond turning of hardened mold steels, The International Journal of Advanced Manufacturing Technology, vol.27, issue.3, pp.1-226, 2009.
DOI : 10.1007/s00170-007-1311-6

. J. Kim2005-], H. K. Kim, D. C. Chang, D. Y. Han, S. I. Jang et al., Cutting Force Estimation by Measuring Spindle Displacement in Milling Process. CIRP Annals -Manufacturing Technology, pp.67-70, 2005.

. J. Kim1996-], I. Kim, and . Choi, Development of a tool failure detection system using multisensors, International Journal of Machine Tools and Manufacture, vol.36, issue.8, pp.861-870, 1996.

]. Kistler2003 and . Kistler, Dynamomètre à trois composantes -9257. Notice technique Kistler, 2003.

M. [. Kuljanic, G. Sortino, and . Totis, Multisensor approaches for chatter detection in milling, Journal of Sound and Vibration, vol.312, issue.4-5, pp.4-5672, 2008.
DOI : 10.1016/j.jsv.2007.11.006

G. [. Kuljanic, M. Totis, and . Sortino, Development of an intelligent multisensor chatter detection system in milling. Mechanical Systems and Signal Processing, pp.1704-1718, 2009.

. [. Kuo, Automatic Control Systems, 1995.

. [. Lapujoulade, Measuring of cutting forces during fast transient periods. First French and German Conference on High Speed Machining, 1997.

G. [. Lapujoulade, J. Coffignal, and . Pimont, Evaluation des forces de coupe en fraisage a grande vitesse, International Conference on Integrated Design and Manufacturing in Mechanical Engineering, 1998.

Y. [. Larue and . Altintas, Simulation of flank milling processes, International Journal of Machine Tools and Manufacture, vol.45, issue.4-5, pp.4-5549, 2005.
DOI : 10.1016/j.ijmachtools.2004.08.020
URL : https://hal.archives-ouvertes.fr/hal-00098357

F. [. Larue and . Lapujoulade, Dynamomètre Piézoélectrique à Compensation Inertielle -Mesure des Efforts de Coupe, Journée Réseau Usinage ENSAM, 2007.

M. [. Lin and . Hu, Low vibration control system in turning, International Journal of Machine Tools and Manufacture, vol.32, issue.5, pp.629-640, 1992.
DOI : 10.1016/0890-6955(92)90018-C

]. C. Lu2008a, J. P. Lu, and . Costes, Surface profile prediction and analysis applied to turning process, International Journal of Machining and Machinability of Materials, vol.4, pp.2-3158, 2008.

]. C. Lu2008b and . Lu, Study on prediction of surface quality in machining process, Journal of Materials Processing Technology, vol.205, pp.1-3439, 2008.

. [. Mahdavinejad, Finite element analysis of machine and workpiece instability in turning, International Journal of Machine Tools and Manufacture, vol.45, issue.7-8, pp.7-8753, 2005.
DOI : 10.1016/j.ijmachtools.2004.11.017

V. [. Mañé, B. C. Gagnol, P. Bouzgarrou, and . Ray, Stability-based spindle speed control during flexible workpiece high-speed milling, International Journal of Machine Tools and Manufacture, vol.48, issue.2, pp.184-194, 2008.
DOI : 10.1016/j.ijmachtools.2007.08.018

*. I. Ma?ková2006+, J. Ma?ková, G. Beno, M. Markova, and . Melcher, Experimental Modelling of Cutting Force, Tool-Wear and Surface Roughness when Turning with Ceramic Inserts

T. [. Mann, P. V. Insperger, G. Bayly, and . Stépán, Stability of up-milling and down-milling, part 2: experimental verification, International Journal of Machine Tools and Manufacture, vol.43, issue.1, pp.35-40, 2003.
DOI : 10.1016/S0890-6955(02)00160-8

P. [. Mann, M. A. Bayly, J. E. Davies, and . Halley, Limit cycles, bifurcations, and accuracy of the milling process, Journal of Sound and Vibration, vol.277, issue.1-2, pp.1-231, 2004.
DOI : 10.1016/j.jsv.2003.08.040

A. [. Marsh and . Schaut, Measurement and simulation of regenerative chatter in diamond turning. Precision Engineering, pp.252-257, 1998.

]. K. Mehdi2002a, J. -. Mehdi, D. Rigal, and . Play, Dynamic Behavior of a Thin-Walled Cylindrical Workpiece During the Turning-Cutting Process, Part 2: Experimental Approach and Validation, Journal of Manufacturing Science and Engineering, vol.124, issue.3, pp.569-580, 2002.
DOI : 10.1115/1.1432667

]. K. Mehdi2002b, J. -. Mehdi, D. Rigal, and . Play, Dynamic behavior of a thin-walled cylindrical workpiece during the turning process, Part 1: Cutting process simulation, Journal of Manufacturing Science and Engineering, Transactions of the ASME, vol.1243, pp.562-568, 2002.

. [. Merritt, Theory of self-excited machine tool chatter, ASME J.Eng.Ind, vol.874, pp.447-454, 1965.

A. [. Moufki, M. Devillez, D. Segreti, and . Dudzinski, A semi-analytical model of non-linear vibrations in orthogonal cutting and experimental validation, International Journal of Machine Tools and Manufacture, vol.46, issue.3-4, pp.3-4436, 2006.
DOI : 10.1016/j.ijmachtools.2005.04.017

P. [. Movahhedy and . Mosaddegh, Prediction of chatter in high speed milling including gyroscopic effects, International Journal of Machine Tools and Manufacture, vol.46, issue.9, pp.996-1001, 2006.
DOI : 10.1016/j.ijmachtools.2005.07.043

C. [. Nayfeh, J. Chin, and . Pratt, Perturbation Methods in Nonlinear Dynamics???Applications to Machining Dynamics, Journal of Manufacturing Science and Engineering, vol.119, issue.4A, pp.4-485, 1997.
DOI : 10.1115/1.2831178

A. [. Orhan, N. Er, E. Camu?cu, and . Aslan, Tool wear evaluation by vibration analysis during end milling of AISI D3 cold work tool steel with 35 HRC hardness, NDT & E International, vol.40, issue.2, pp.121-126, 2007.
DOI : 10.1016/j.ndteint.2006.09.006

G. [. Paris, R. Peigne, and . Mayer, Surface shape prediction in high speed milling, International Journal of Machine Tools and Manufacture, vol.44, issue.15, pp.1567-1576, 2004.
DOI : 10.1016/j.ijmachtools.2004.06.005

G. [. Paris and . Peigne, Influence of the cutting tool geometrical defects on the dynamic behaviour of machining, International Conference on Integrated Design and Manufacturing in Mechanical Engineering, 2006.
DOI : 10.1007/s12008-007-0005-5
URL : https://hal.archives-ouvertes.fr/hal-00376131

Y. [. Park, M. Altintas, and . Movahhedy, Receptance coupling for end mills, International Journal of Machine Tools and Manufacture, vol.43, issue.9, pp.889-896, 2003.
DOI : 10.1016/S0890-6955(03)00088-9

Y. [. Park and . Altintas, Dynamic Compensation of Spindle Integrated Force Sensors With Kalman Filter, Journal of Dynamic Systems, Measurement, and Control, vol.126, issue.3, pp.443-452, 2004.
DOI : 10.1115/1.1789531

. [. Park, Identification of Spindle Integrated Force Sensor???s Transfer Function for Modular End Mills, Journal of Manufacturing Science and Engineering, vol.128, issue.1, pp.146-153, 2006.
DOI : 10.1115/1.2137749

B. [. Patel, K. A. Mann, and . Young, Uncharted islands of chatter instability in milling, International Journal of Machine Tools and Manufacture, vol.48, issue.1, pp.124-134, 2008.
DOI : 10.1016/j.ijmachtools.2007.06.009

. [. Peigne, Etude et simulation des effets dynamiques de la coupe sur la stabilité de la coupe et la qualité géométrique de la surface usinée : application au fraisage de profil, 2003.

H. [. Peigne, D. Paris, A. Brissaud, and . Gouskov, Impact of the cutting dynamics of small radial immersion milling operations on machined surface roughness, International Journal of Machine Tools and Manufacture, vol.44, issue.11, pp.1133-1142, 2004.
DOI : 10.1016/j.ijmachtools.2004.04.012

[. Gmbh, Geometry deviations on moving parts. Présentation technique Polytec, 2003.

]. M. Ritou2006b, S. Ritou, B. Garnier, J. Furet, and . Hascoet, A new versatile in-process monitoring system for milling, International Journal of Machine Tools and Manufacture, vol.4615, pp.2026-2035, 2006.

S. [. Ritou, G. Laporte, B. Peigne, S. Furet, J. Garnier et al., Instrumentation de la broche par des capteurs inductifs : application à la mesure d'effort et à l, 2007.

K. [. Ryabov, N. Mori, and . Kasashima, Laser displacement meter application for milling diagnostics, Optics and Lasers in Engineering, vol.30, issue.3-4, pp.3-4251, 1998.
DOI : 10.1016/S0143-8166(98)00032-3

. T. Schmitz2003-] and . Schmitz, Chatter recognition by a statistical evaluation of the synchronously sampled audio signal, Journal of Sound and Vibration, vol.262, issue.3, pp.721-730, 2003.
DOI : 10.1016/S0022-460X(03)00119-6

. T. Schmitz2007-], J. Schmitz, E. Couey, N. Marsh, D. Mauntler et al., Runout effects in milling: Surface finish, surface location error, and stability, International Journal of Machine Tools and Manufacture, vol.47, issue.5, pp.841-851, 2007.
DOI : 10.1016/j.ijmachtools.2006.06.014

]. S. Seguy2008a and . Seguy, De l'adaptation à la variation continue de la vitesse de broche afin de contrôler le broutement en fraisage de parois minces : modélisation et études expérimentales, 2008.

]. S. Seguy2008b, G. Seguy, L. Dessein, and . Arnaud, Surface roughness variation of thin wall milling, related to modal interactions, International Journal of Machine Tools and Manufacture, vol.48, pp.3-4261, 2008.

]. V. Sharma2008a, S. Sharma, R. Dhiman, S. K. Sehgal, and . Sharma, Estimation of cutting forces and surface roughness for hard turning using neural networks, Journal of Intelligent Manufacturing, vol.19, issue.4, pp.473-483, 2008.
DOI : 10.1007/s10845-008-0097-1

]. V. Sharma2008b, S. K. Sharma, A. K. Sharma, and . Sharma, Cutting tool wear estimation for turning, Journal of Intelligent Manufacturing, vol.19, issue.1, pp.99-108, 2008.

. S. Smith1993-], J. Smith, and . Tlusty, Efficient Simulation Programs for Chatter in Milling. CIRP Annals -Manufacturing Technology, pp.463-466, 1993.

. T. Surmann2006-] and . Surmann, Geometric model of the surface structure resulting from the dynamic milling process. 9th CIRP International Workshop on Modeling of Machining Operations, 2006.

. T. Surmann2008-], D. Surmann, and . Biermann, The effect of tool vibrations on the flank surface created by peripheral milling. CIRP Annals -Manufacturing Technology, pp.375-378, 2008.

E. [. Tarng and . Lee, A critical investigation of the phase shift between the inner and outer modulation for the control of machine tool Chatter, International Journal of Machine Tools and Manufacture, vol.37, issue.12, pp.1661-1672, 1997.
DOI : 10.1016/S0890-6955(97)00035-7

P. [. Tatar and . Gren, Measurement of milling tool vibrations during cutting using laser vibrometry, International Journal of Machine Tools and Manufacture, vol.48, issue.3-4, pp.3-4380, 2008.
DOI : 10.1016/j.ijmachtools.2007.09.009

L. [. Thevenot, G. Arnaud, G. Dessein, and . Cazenave-larroche, Integration of dynamic behaviour variations in the stability lobes method: 3D lobes construction and application to thin-walled structure milling, The International Journal of Advanced Manufacturing Technology, vol.27, issue.7-8, pp.7-8638, 2006.
DOI : 10.1007/s00170-004-2241-1
URL : https://hal.archives-ouvertes.fr/hal-00800292

L. [. Thevenot, G. Arnaud, G. Dessein, and . Cazenave-larroche, Influence de la position de l'outil sur le comportement dynamique en fraisage de parois minces. Mecanique et Industries, pp.403-410, 2005.
URL : https://hal.archives-ouvertes.fr/hal-00800368

. J. Tlusty1963-], M. Tlusty, and . Polacek, Stability of machine tool against self-excited vibration in machining, Proceedings of the International Research in Production Engineering, pp.465-474, 1963.

. J. Tlusty1981-], F. Tlusty, and . Ismail, Basic Non-Linearity in Machining Chatter. CIRP Annals - Manufacturing Technology, pp.299-304, 1981.

]. J. Tlusty1983a, G. C. Tlusty, and . Andrews, A Critical Review of Sensors for Unmanned Machining. CIRP Annals -Manufacturing Technology, pp.563-572, 1983.

]. J. Tlusty1983b, W. Tlusty, F. Zaton, and . Ismail, Stability Lobes in Milling. CIRP Annals - Manufacturing Technology, pp.309-313, 1983.

. [. Tobias, Vibration of machine tools, Production Engineer, vol.43, issue.12, 1965.
DOI : 10.1049/tpe.1964.0084

. [. Urmaze, Chatter-Free Milling And Optimized Material Removal Rates: Chatter Theory Fundamentals

. S. Vafaei2002-], H. Vafaei, R. Rahnejat, and . Aini, Vibration monitoring of high speed spindles using spectral analysis techniques, International Journal of Machine Tools and Manufacture, vol.42, issue.11, pp.1223-1234, 2002.
DOI : 10.1016/S0890-6955(02)00049-4

. N. Van-dijk2008-], R. P. Van-dijk, N. Faasen, H. Van-de-wouw, and . Nijmeijer, Realtime detection and control of machine tool chatter in high speed milling, 2nd International Conference « Innovative Cutting Processes & Smart Machining », 2008.

. A. Verl2009-], U. Verl, M. Heisel, D. Walther, and . Maier, Sensorless automated condition monitoring for the control of the predictive maintenance of machine tools. CIRP Annals -Manufacturing Technology, pp.375-378, 2009.

A. [. Wahi and . Chatterjee, Self-interrupted regenerative metal cutting in turning, International Journal of Non-Linear Mechanics, vol.43, issue.2, pp.111-123, 2008.
DOI : 10.1016/j.ijnonlinmec.2007.10.010

B. [. Yang, J. Zhang, and . Yu, Chatter suppression with multiple time-varying parameters in turning, Journal of Materials Processing Technology, vol.141, issue.3, pp.431-438, 2003.
DOI : 10.1016/S0924-0136(03)00427-8

I. [. Zatarain, J. Bediaga, R. Muñoa, and . Lizarralde, Stability of milling processes with continuous spindle speed variation: Analysis in the frequency and time domains, and experimental correlation. CIRP Annals -Manufacturing Technology, pp.379-384, 2008.

. J. Zhang2008-], J. C. Zhang, and . Chen, Tool condition monitoring in an end-milling operation based on the vibration signal collected through a microcontroller-based data acquisition system, International Journal of Advanced Manufacturing Technology, vol.39, pp.1-2118, 2008.

B. [. Zhao and . Balachandran, Dynamics and stability of milling process, International Journal of Solids and Structures, vol.38, issue.10-13, pp.10-132233, 2001.
DOI : 10.1016/S0020-7683(00)00164-5