H. Aladad, Conception du Système de Fabrication de pièces mécaniques en grande série: formalisation de la configuration géométriques (enveloppe) et cinématiques de Machine-Outil Reconfigurable (MOR), Thèse de doctorat, 2009.

G. Altshuller, 40 principles: TRIZ, keys to technical innovation, 1997.

T. Armillotta, C. Carrino, . Morini, . Polini, and . Semeraro, An analytical approach to machining deviation due to fixturing, 7th CIRP International Seminar on CAT, ENS de Cachan, pp.173-182, 2001.
DOI : 10.1007/978-94-017-1691-8_18

M. Ayman, A. Youssef, and H. A. Elmaraghy, Assessment of manufacturing systems reconfiguration smoothness, International Journal of advance Manufacturing Technology, vol.30, pp.174-193, 2006.

A. Ballu and L. Mathieu, Choice of functionnal specifications using graphs within the framework education, 6th CIRP International Seminar on CAT, pp.197-206, 1999.

A. Baqai, A. Siadat, J. Dantan, and P. Martin, A Proposed Design Process Framework for a Reconfigurable Manufacturing System, LT'07: International Workshop on Logistics and Transportation, 2007.

A. Baqai, J. Dantan, A. Siadat, and P. Martin, Use of a manufacturing ontology and Function-Behaviour-Structure approach for the design of a Reconfigurable Machine Tool, International Journal of Product Lifecycle Management, vol.3, issue.2/3, pp.132-150, 2008.
DOI : 10.1504/IJPLM.2008.021438

A. Baqai, S. Schmidt, J. Dantan, A. Siadat, and M. P. , Algorithmic Design Methodology for Process Plans and Architectural Configurations of Manufacturing Systems, CIRPMS09, 42nd CIRP Conference on Manufacturing Systems, 2009.

S. Belmokhtar, A. Dolgui, N. Guschinsky, and G. Levin, Integer programming models for logical layout design of modular machining lines, Computers & Industrial Engineering, vol.51, issue.3, pp.502-518, 2006.
DOI : 10.1016/j.cie.2006.08.010
URL : https://hal.archives-ouvertes.fr/hal-00387641

B. Younes and J. , Modélisation des ressources en fabrication mécanique application au choix des outils coupants dans un environnement orienté objet, 1994.

R. Bénéat, G. Cloutier, and C. Fortin, Process Plan validation including process deviations and machine tool-errors, 7th CIRP International Seminar on CAT, ENS de Cachan, pp.191-200, 2001.

A. Bernard, (sous la direction) Groupe GAMA, Fabrication Assistée par Ordinateur, Hermès, 2003.

E. L. Bohez, Five-axis milling machine tool kinematic chain design and analysis, International Journal of Machine Tools and Manufacture, vol.42, issue.4, pp.505-520, 2002.
DOI : 10.1016/S0890-6955(01)00134-1

P. Bourdet, Chaînes de cotes de fabrication : le modèle, 1973(a), L'ingénieur et le technicien de l'enseignement

P. Bourdet and A. Clément, A Study of Optimal-Criteria Identification Based on the Small-Displacement Screw Model, CIRP Annals - Manufacturing Technology, vol.37, issue.1, pp.503-506, 1988.
DOI : 10.1016/S0007-8506(07)61687-4

P. Bourdet, Chaînes de cotes de fabrication : le mode opératoire, 1973(b), L'ingénieur et le technicien de l'enseignement

D. Brissaud, Système de génération automatique de gammes d'usinage pour les industries manufacturières, 1992.

K. Case and M. S. Hounsell, Feature modelling: a validation methodology and its evaluation, Journal of Materials Processing Technology, vol.107, issue.1-3, pp.15-23, 2000.
DOI : 10.1016/S0924-0136(00)00693-2

K. Case, W. Harum, and W. A. , A single representation to support assembly and process planning in feature-based design machined parts, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, vol.1, issue.2, pp.143-155, 1999.
DOI : 10.1243/0954405991517326

I. D. Carpenter and P. G. Maropoulos, A flexible tool selection decision support system for milling operations, Journal of Materials Processing Technology, vol.107, issue.1-3, pp.143-152, 2000.
DOI : 10.1016/S0924-0136(00)00707-X

T. Chang and R. A. Wysk, An Introduction to Automated Process Planning Systems. Industrial and Systems Engineering, 1985.

B. Chandrasekaran, J. R. Josephson, and V. R. Benjamins, What are ontologies, and why do we need them?, IEEE Intelligent Systems, vol.14, issue.1, pp.20-26, 1999.
DOI : 10.1109/5254.747902

T. C. Chang, Expert process planning for manufacturing, 1990.

G. Chryssolouris, Manufacturing Systems: Theory and Practice, Series: Mechanical Engineering Series, XXVI, 606 p. 290 illus., Hardcover ISBN, pp.978-978, 1992.
DOI : 10.1007/978-1-4757-2213-0

L. Chen, F. Xi, and A. Macwan, Optimal Module Selection for Preliminary Design of Reconfigurable Machine Tools, Journal of Manufacturing Science and Engineering, vol.127, issue.1, pp.104-115, 2005.
DOI : 10.1115/1.1826075

A. Chep, L. Tricarico, P. Bourdet, and L. Galantuccl, Design of object-oriented database for the definition of machining operation sequences of 3D workpieces, Computers & Industrial Engineering, vol.34, issue.2, pp.257-279, 1998.
DOI : 10.1016/S0360-8352(97)00326-4

D. Cochran, Production System Design and deployment framework, International Automotive Manufacturing Conference and exposition, 1999.
DOI : 10.4271/1999-01-1644
URL : http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.477.4769

D. Cochran and J. Linck, A decomposition approach for manufacturing system design, Journal of Manufacturing Systems, vol.20, issue.6, pp.371-389, 2001.
DOI : 10.1016/S0278-6125(01)80058-3

D. Cochran and V. Reynal, Axiomatic design of Manufacturing Systems, The Lean aircraft Initiative Report, series #, pp.96-101, 1996.

D. Cochran, G. Reinhart, and J. Linck, Decision support for Manufacturing system design-combining a decomposition methodology with procedural manufacturing Design, The Third world congress on intelligent manufacturing processes and systems- Cambridge, 2000.

D. Cochran and H. Rudolf, Investment and resource allocation Methodology to support manufacturing system Design Implementation, Journal of Manufacturing Systems CIRP, 2003.

J. Ciurana, M. L. Romeu, and R. Castro, Optimising process planning using groups of precedence between operations based on machined volumes, Engineering Computations, vol.20, issue.1, pp.67-81, 2003.
DOI : 10.1108/02644400310458847

J. J. Cunningham and J. R. Dixon, Designing with Features : the Origin of Features, Proceedings of the ASME Symposium on Computers in Engineering, CIE, pp.237-243, 1988.

S. Dano, Industrial Production Model, 1966.
DOI : 10.1007/978-3-7091-8140-9

D. Acunto, A. Martin, P. Aladad, and H. , Design of Reconfigurable Machine Tool: Structural Creating and Kinematical Model, 40th CIRP International Seminar on Manufacturing Systems, pp.30-31, 2007.

A. M. Deif and W. Elmaraghy, RETRACTED ARTICLE: Effect of reconfiguration costs on planning for capacity scalability in reconfigurable manufacturing systems, International Journal of Flexible Manufacturing Systems, vol.12, issue.7, pp.225-238, 2006.
DOI : 10.1007/s10696-006-9006-0

A. Dugas, Simulation d'usinage de formes complexes, Thèse de doctorat, 2002.

H. A. Elmaraghy and W. H. Elmaraghy, A System for modelling geometric tolerances for mechanical design, Proceeding of the 3rd CIRP seminars on Computer Aided Tolerancing, pp.11-24, 1993.

H. A. Elmaraghy, (b): Reconfigurable Process Plans for Reconfigurable Manufacturing, Proceedings of the 3rd International CIRP Sponsored Conference on Digital Enterprise Technology, 2006.

H. A. Elmaraghy and A. M. Youssef, Availability consideration in the optimal selection of multiple-aspect RMS configurations, International journal of production research, vol.46, issue.21, pp.5849-5882, 2006.

E. Wakil and D. Sherif, Processes and Design for Manufacturing, pp.17-23, 2002.

A. Etienne and F. Langlet, Formalisation et traitement des données et des connaissances dans la perspective d'automatiser la conception des processus d'usinage des entités axiales, rapport interne, 2003.

H. Elmaraghy, A, Flexible and Reconfigurable Manufacturing Systems Paradigms, International Journal of Flexible Manufacturing Systems. Special Issue: Reconfigurable Manufacturing Systems, pp.261-276, 2005.

A. Etienne, J. Y. Dantan, A. Siadat, and P. Martin, An improved approach for automatic process plan generation of complex borings', Computers in Industry, pp.663-675, 2006.

S. C. Feng and E. Y. Song, Information Modeling of Conceptual Process Planning Integrated with Conceptual Design, Proceedings of DETC2000, 2000.

B. Finel, Structuration de lignes d'usinage : méthodes exactes et heuristiques, Thèse de doctorat, 2004.

R. Galan, J. Raacero, I. Eguia, and D. Canca, A methodology for facilitating reconfiguration in manufacturing: the move towards reconfigurable manufacturing systems, The International Journal of Advanced Manufacturing Technology, vol.7, issue.3-4, pp.345-353, 2007.
DOI : 10.1007/s00170-006-0461-2

C. C. Gallagher and W. A. Knight, Group Technology Production Methods in Manufacture, Journal of Manufacturing Science and Engineering, vol.113, issue.1, 1986.
DOI : 10.1115/1.2899614

S. Gao and J. J. Shah, Automatic recognition of interacting machining features based on minimal condition subgraph, Computer-Aided Design, vol.30, issue.9, pp.727-739, 1998.
DOI : 10.1016/S0010-4485(98)00033-5

G. Groupe, La gamme automatique en usinage, 1990.

O. Garro, P. Martin, and M. Véron, Shiva A Multiarms Machine Tool, CIRP Annals, pp.433-436, 1993.

O. Garro and P. Martin, Towards new architectures of machine tools', International journal of production research, pp.10-2403, 1993.

O. Garro, Conception d'éléments physiques de système de production ? application aux machine outil a architecture parallèle, 1992.

J. S. Gero, Design prototypes: A knowledge representation scheme for design, AI Magazine, pp.26-36, 1990.

J. S. Gero and U. Kannengiesser, The situated function-behaviour-structure framework, Artificial Intelligence in Design'02, pp.89-104, 2002.

M. Grunninger and J. Lee, Ontology: applications and design, Communications of the ACM, vol.45, pp.39-41, 2002.

I. Ham, K. Hitomi, and T. Yishida, Group Technology, Application to Production Management, 1985.

C. C. Ho and H. Chi, Feature-Based Process Planning and Automatic Numerical Control Part Programming A new approach of group technology part family optimisation, Annals of the CIRP, pp.425-428, 1994.

D. Hendricks, System Design Implementation in Aircraft Manufacturing Industry, Thesis (Masters). Massachusetts Institute of Technology, 2002.

H. 'mida, F. Martin, P. Vernadat, and F. , Cost estimation in mechanical production: the cost entity approach applied to integrated product engineering, Int. J. Production Economics, vol.103, pp.17-35, 2006.

X. Hu, J. Pang, Y. Pang, M. Atwood, W. Sun et al., A survey on design rationale: representation, capture and retrieval, Proceedings of DETC'00 ASME Design Engineering Technical Conferences, pp.2000-14008, 2000.

S. Hu, Y. Koren, and K. Stecke, Introduction, International Journal of Flexible Manufacturing Systems, vol.48, issue.4, pp.259-260, 2006.
DOI : 10.1007/s10696-006-9027-8
URL : https://hal.archives-ouvertes.fr/hal-00642789

S. J. Hu, Paradigms of manufacturing?a panel discussion, 3rd Conference on Reconfigurable Manufacturing, 2005.

W. G. Ioannou and S. W. , Use of activity-based costing and economic value analysis for the justification of capital investments in automated material handling systems, International Journal of Production Research, vol.37, issue.9, pp.2100-2134, 1999.
DOI : 10.1080/002075499190932

P. Ji, An algebraic approach for dimensional chain identification in process planning, International Journal of Production Research, vol.37, issue.1, pp.1-99, 1999.
DOI : 10.1080/002075499191940

R. Katz, M. , and Y. , Virtual arch type Reconfigurable Machine Tool design: Principles and Methodology, Report NSF ERC for RMS, 2000.

Y. Koren, General RMS Characteristics. Comparison with Dedicated and Flexible Systems, Reconfigurable Manufacturing Systems and Transformable Factories, pp.27-46, 2006.
DOI : 10.1007/3-540-29397-3_3

Y. Koren and U. Heisel, Reconfigurable Manufacturing Systems, Engineering Research centre for Reconfigurable Machining Systems (ERC/RMS) report # 1, The university of Michigan, 1997.

Y. Koren and U. Heisel, Reconfigurable Manufacturing Systems, Annals of CIRP, vol.482, pp.527-540, 1999.
DOI : 10.1007/978-3-642-55776-7_19

Y. Koren and U. Heisel, Vision, Principles and Impact of Reconfigurable Manufacturing Systems, Powertrain International, pp.14-21, 2002.

D. Kiritsis, A review of knowledge-based expert systems for process planning. Methods and problems, The International Journal of Advanced Manufacturing Technology, vol.41, issue.1, pp.240-262, 1995.
DOI : 10.1007/BF01186876

O. Kulak and M. B. Durmusoglu, A complete cellular manufacturing system design methodology based on axiomatic design principles, Computers & Industrial Engineering, vol.48, issue.4, pp.765-787, 2005.
DOI : 10.1016/j.cie.2004.12.006

M. Labrousse, A. Bernard, and P. Véron, Generic FBS concept for process / product / resource integration, Tools and Methods Of Competitive Engineering, pp.384-394, 2004.

A. Larue and B. Anselmetti, Deviation of a machined surface in flank milling, International Journal of Machine Tools and Manufacture, vol.43, issue.2, pp.129-138, 2003.
DOI : 10.1016/S0890-6955(02)00189-X
URL : https://hal.archives-ouvertes.fr/hal-00098366

S. Lemaignan, A. Siadat, J. Dantan, and A. Semenenko, MASON: A Proposal For An Ontology Of Manufacturing Domain, IEEE Workshop on Distributed Intelligent Systems: Collective Intelligence and Its Applications (DIS'06), pp.15-16, 2006.
DOI : 10.1109/DIS.2006.48

R. G. Lenders, B. Min, and Y. Koren, Reconfigurable Machine Tools, CIRP Annals - Manufacturing Technology, vol.50, issue.1, pp.269-274, 2001.
DOI : 10.1016/S0007-8506(07)62120-9

L. Chen, F. Xi, and A. Macwan, Optimal Module Selection for Preliminary Design of Reconfigurable Machine Tools, Journal of Manufacturing Science and Engineering, vol.127, issue.1, pp.104-115, 2005.
DOI : 10.1115/1.1826075

B. Li and S. N. Melkote, Improved workpiece location accuracy through fixture layout optimization, International Journal of Machine Tools and Manufacture, vol.39, issue.6, pp.39-871, 1999.
DOI : 10.1016/S0890-6955(98)00072-8

T. W. Liao, Classification and coding approaches to part family formation under a fuzzy environment, Fuzzy Sets and Systems, pp.425-441, 2001.

. W. Liu and . M. Liang, Multi-objective design optimization of reconfigurable machine tools: a modified fuzzy-Chebyshev programming approach, International Journal of Production Research, vol.56, issue.6, pp.1587-1618, 2008.
DOI : 10.1023/A:1018560922013

. Lohse, Towards an ontology framework for the integrated design of modular assembly systems, 2006.

N. Lohse, H. Hirani, and S. Ratchev, Equipment ontology for modular reconfigurable assembly systems, International Journal of Flexible Manufacturing Systems, vol.42, issue.1, pp.301-314, 2006.
DOI : 10.1007/s10696-006-9030-0

P. Martin and D. , Design of a production system: An application of integration product-process, International Journal of Computer Integrated Manufacturing, vol.16, issue.7-8, pp.509-516, 2003.
DOI : 10.1080/0951192031000115831

P. Martin, J. Y. Dantan, and A. Siadat, Cost estimation and conceptual process planning, Digital Enterprise Technology, pp.243-250, 2007.

M. G. Mehrabi, Y. Koren, and A. Ulsoy, Trends and perspectives in flexible and reconfigurable Manufacturing Systems, Journal of Intelligent Manufacturing, vol.13, issue.2, pp.135-146, 2002.
DOI : 10.1023/A:1014536330551

T. Michel, Conception de produits mécanique, méthodes modèles et outils, 1998.

A. Molina, C. A. Rodriguez, H. Ahuett, J. A. Cortés, M. Ramírez et al., Next-generation manufacturing systems: key research issues in developing and integrating reconfigurable and intelligent machines, International Journal of Computer Integrated Manufacturing, vol.8, issue.7, pp.7-525, 2005.
DOI : 10.1016/0166-3615(94)00043-P

Y. Moon and S. Kota, Design of Reconfigurable Machine Tools, Proc. 32 nd CIRP Intl. Seminar on Manufacturing Systems, pp.297-303, 1999.

Y. Moon, Reconfigurable Machine Tool Design, 2000.
DOI : 10.1007/3-540-29397-3_7

Y. Moon and S. Kota, Design of Reconfigurable Machine Tools, Transactions of the ASME, vol.124, pp.480-483, 2002.

M. Rami, A. Huang, S. H. Shultes, and B. C. , Simulation-based manufacturing error synthesis: input analysis and validation, Transactions of NAMRI/SME, vol.32, pp.311-318, 2004.

N. Ong, Activity-based cost tables to support wire harness design, International Journal of Production Economics, vol.29, issue.3, pp.271-289, 1993.
DOI : 10.1016/0925-5273(93)90033-H

S. Park and G. Kim, An economic evaluation model for advanced manufacturing systems using activity-based costing, Journal of Manufacturing Systems, vol.14, issue.6, pp.439-451, 1995.
DOI : 10.1016/0278-6125(95)99916-2

S. G. Park, Knowledge capturing methodology in process planning, Computer-Aided design, pp.1109-1117, 2003.

G. Pahl, W. Beitz, and K. Wallace, Engineering Design ? A Systematic Approach, 1996.

M. J. Pratt, Solid Modeling and the Interface Between Design and Manufacture, IEEE Computer Graphics and Applications, vol.4, issue.7, pp.52-59, 1984.
DOI : 10.1109/MCG.1984.275902

C. Pourcel, Système automatisés de production

A. Raghu and S. N. Melkote, Analysis of the effects of fixture clamping sequence on part location errors, International Journal of Machine Tools and Manufacture, vol.44, issue.4, pp.373-382, 2004.
DOI : 10.1016/j.ijmachtools.2003.10.015

Y. Rong, W. Hu, Y. Kang, Y. Zhang, W. David et al., Locating error analysis and tolerance assignment for computer-aided fixture design, International Journal of Production Research, vol.116, issue.15, pp.15-3529, 2001.
DOI : 10.1080/00207540110056171

L. Sabourin, L'expertise en conception de gammes d'usinage : approche par entités et propagation de contraintes, pp.11-134, 1995.

L. Sabourin and F. Villeneuve, Omega an expert CAPP system Advances in Engineering Software n°25, p.59, 1996.

S. Samuel, Approche algorithmique de la generation des processus d'usinage et des structures des systemes de production reconfigurables, 2008.

T. E. Seo, Intégration des effets de déformation d'outil en génération de trajectoires d'usinage, Thèse de doctorat, 1998.

A. K. Sethi and S. P. Sethi, Flexibility in manufacturing: A survey, International Journal of Flexible Manufacturing Systems, vol.2, issue.4, pp.289-328, 1990.
DOI : 10.1007/BF00186471

A. I. Shabaka and H. A. Elmaraghy, Generation of machine configurations based on product features, International Journal of Computer Integrated Manufacturing, vol.9, issue.4, pp.355-369, 2007.
DOI : 10.1080/00207540110056171

J. J. Shah, P. Sreevalsan, M. Rogers, R. Billo, and A. Matthew, Current status of features technology, 1988.

J. J. Shah, M. Mantilla, and D. S. Nau, Advances in Feature Based Manufacturing, 1994.

D. N. Sormaz and B. Khoshnevis, Generation of alternative process plan in integrated manufacturing system, Journal of Intelligent Manufacturing, vol.14, issue.6, pp.509-526, 2003.
DOI : 10.1023/A:1027302604072

N. Suh, Axiomatic Design-Advances and applications, 2001.

A. Thibault, A. Siadat, R. Bigot, and M. P. , Method For Integrated Design Using a Knowledge Formalization, pp.978-972, 2006.
DOI : 10.1007/978-0-387-49864-5_68

M. Tollenaere, Conception de produits mécaniques: méthodes, modèles et outils, Hermès, 1998.

F. Villeneuve and M. Barrabes, Object data base, AI and CAD-CAM: Application to the Process Ascending Generation (PAG) Concept, Computers in Design, Manufacturing and Production, 7th Annual European Computer Conference (IEEE), Compeuro 93, pp.320-329, 1993.

H. Wiendahl, Some remarks on changeability, reconfigurability and flexibility of manufacturing systems, Paradigms of manufacturing ? Panel discussion, 3 rd Conference on reconfigurable Manufacturing USAAlpha 1 Research Group. Alpha 1 User's Manual, 1992.

S. Tichadou, Modélisation et quatification tridimensionnelles des écarts de fabrication pour la simulation d'usinage, 2005.

S. Tichadou, O. Legoff, and J. Hascoët, 3D geometrical simulation of manufacturing Compared approaches between integrated CAD/CAM system and small displacement torsor model Advances in Integrated Design and Manufacturing in Mechanical Engineering, pp.446-456, 2005.

F. Thiebaut, Contribution à la définition d'un moyen unifié de gestion de la géométrie réaliste basé sur le calculs des lois de comportement des mécanismes, Thèse de doctorat, 2001.

M. Tollenaere, Conception de produits mécaniques: méthodes, modèles et outils, Hermès, 1998.

S. B. Tor, S. G. Lee, G. A. Britton, and W. Y. Zhang, Knowledge-based functional design of industrial robots, International Journal of Production Research, vol.46, issue.16, pp.4501-4519, 2008.
DOI : 10.1007/s001700200048

F. Villeneuve and M. Barrabes, Object data base, AI and CAD-CAM: Application to the Process Ascending Generation (PAG) Concept, Computers in Design, Manufacturing and Production, 7th Annual European Computer Conference (IEEE), Compeuro 93, pp.320-329, 1993.

D. Waltz, Generating semantic descriptions from drawings of scenes with shadows, MIT Libraries, AITR-271, 1972.

H. Wang, L. , and J. , of Advances in Industrial Engineering, Computer-Aided Process Planning, vol.13, 1991.

J. B. Xue and P. Ji, Identifying tolerance chains with a surface-chain model in tolerance charting, Journal of Materials Processing Technology, vol.123, issue.1, pp.123-93, 2002.
DOI : 10.1016/S0924-0136(02)00078-X

H. C. Zhang and L. Alting, Computerised manufacturing process planning systems, 1994.

L. Zimmer, A. Anglada, M. Christie, and L. Granvilliers, Constraint Explorer, A modelling and sizing tool for Engineering Design, 8th World Multiconference on Systemics, Cybernetics and Informatics, 2004.