W. Elber, The significance of fatigue crack closure"; Damage tolerance in aircraft structure; ASTM STP 486, pp.230-242, 1971.

J. C. Fisher, Calculation of Diffusion Penetration Curves for Surface and Grain Boundary Diffusion, Journal of Applied Physics, vol.22, issue.1, pp.74-77, 1951.
DOI : 10.1063/1.1699825

E. Fleury, Endommagement du superalliage moncristallin AM1 en fatigue isotherme et anisotherme"; Thèse de doctorat, 1991.

C. J. Franklin and . Courtsouradis, High Temperature alloys for gas turbines, Eds; Applied Science Pub, pp.513-547, 1978.

A. Fredholm and J. L. Strudel, sy, 1984.

M. Gell and G. R. Leverant, (1973); dans Fatigue at High Temperature; ASTM STP 520, pp.37-67

E. Glenny, Thermal and high strain fatigue"; The Institute of Metals and the Iron and Steel Institute, june, pp.6-7, 1967.

E. Glenny, Paper NoA study of the thermal-fatigue behaviour metals"; Journal of the Institute of Metals, pp.449-461, 1970.

J. Grison, Amorçage des fissures sur inclusions dans un superalliage de la métallurgie des poudres sollicité en fatigue, 1994.

H. Hahn and R. , The variation of KIc with temperature and loading rate, Metallurgical Transactions, vol.21, issue.2, p.537, 1971.
DOI : 10.1007/BF02663346

G. Hochstetter, Propagation des fissures à haute température dans un superalliage pour disques de turbomachine (alliage N18) Interaction entre la nature des sollicitations mécaniques et des effets d'oxydation, 1994.

S. W. Hopkins, (1976); in Thermal Fatigue of Materials and components; ASTM STP 612, American Society for Testing and Materials, pp.157-169

G. R. Irwin, Fracture mechanics"; Proceedings of 1st naval symposium; Goodier and Hoff Eds; Pergamon Pres, pp.557-594, 1960.

L. M. Kachanov, Introduction to continuum damage mechanics"; Martinus Nijhoff, 1986.

A. Koster and L. Rémy, Rapport finalÉtude en fatigue anisotherme du Superwaspaloy et de l'Inconel 909, et mise au point d'un banc de fatigue thermique, p.104, 1991.

A. Koster and L. Rémy, Calcul d'un four à image : cas du four à lobes elliptiques"; Rapport interne, 1992.

A. Koster, E. Fleury, E. Vasseur, and L. Rémy, Thermal-Mechanical Fatigue Testing; Automation in Fatigue and Fracture : Testing and Analysis"; ASTM STP 1231; C, AMSALLAG Ed.; ASTM; Philadelphia, pp.563-580, 1994.

A. Koster, G. Laurent, and L. Rémy, Analysis of thermal fatigue tests for superalloy components"; Fatigue under thermal and mechanical loading, VALLES Eds.; Kluwer, pp.25-35, 1995.

C. Levaillant, Approche métallographique de l'endommagement d'aciers inoxydables austénitiques sollicités en fatigue plastique ou en fluage : description et interprétation physique des interactions fatigue, thèse de Doctorat ès Sciences Physiques, 1984.

M. Clintock and F. A. , (1963); dans Fracture of solids, pp.65-102

M. Evily and A. J. , Current aspect of fatigue"; Metal Science Nr 11, pp.274-284, 1977.

J. L. Malpertu, Fatigue mécano-thermique d'un superalliage à base de nickel"; Thèse de doctorat, 1987.

S. S. Manson, (1973); dans Fatigue at Elevated Temperatures; ASTM STP 520; American Society for Testing and Materials; Philadelphia, pp.744-782

K. J. Marsh, R. A. Smith, and R. O. Ritchie, Fatigue crack measurement techniques and applications"; EMAS; Warley; West Midlands, 1991.

K. J. Miller, THE BEHAVIOUR OF SHORT FATIGUE CRACKS AND THEIR INITIATION, Eng. Mater. Struct.; vol, vol.10, issue.2, pp.93-113, 1987.
DOI : 10.1016/B978-0-08-034912-1.50183-1

R. Molins, Oxydation de superalliages à base de nickel, Identification des mécanismes et conséquences sur le mode de propagation des fissures en fatigue à haute température, 1995.
DOI : 10.1051/jp4:2000436

D. F. Mowbray, D. A. Woodford, and D. E. Brandt, Fatigue at elevated temperatures"; ASTM STP 520, pp.416-426, 1973.

D. F. Mowbray, M. Connelle, and J. E. , Thermal fatigue of materials and components"; ASTM STP 612, pp.10-29, 1976.

F. Mudry, Etude de la rupture ductile et de la rupture par clivage des aciers faiblement alliés, Thèse de Doctorat ès Sciences, 1982.

P. C. Paris, M. C. Gomez, and W. E. Anderson, A rational analytic theory of fatigue"; Trend in Engineering, 1961.

P. Pilvin, Identification des paramètres de modèles de comportement, Proc. Mécamat, pp.155-164, 1988.

C. A. Rau-jr, A. E. Gemma, and G. R. Leverant, (1973); in Fatigue at Elevated Temperatures; ASTM STP 520, pp.166-178

M. Réger and L. Rémy, Fatigue oxidation interaction in in 100 superalloy, Metallurgical Transactions A, vol.22, issue.9, pp.2259-2268, 1988.
DOI : 10.1007/BF02645049

M. Réger and L. Rémy, High temperature, low cycle fatigue of IN-100 superalloy II: Influence of frequency and environment at high temperatures, Materials Science and Engineering: A, vol.101, pp.55-63, 1988.
DOI : 10.1016/0921-5093(88)90050-0

J. Reuchet and L. Rémy, Fatigue oxidation interaction in a superalloy???application to life prediction in high temperature low cycle fatigue, Metallurgical Transactions A, vol.12, issue.1, pp.141-149, 1983.
DOI : 10.1007/BF02643747

L. Rémy, (1986); dans Fatigue à Haute Température, Proc. Conf.; Journées de Printemps de la SFM; 9-11 juin

L. Rémy, H. Bernard, J. L. Malpertu, and F. Rezaï-aria, Thermomechanical fatigue behaviour of materials"; ASTM STP 1186, Sehitoglu); American Society for Testing and Materials, pp.3-16, 1993.

L. Rémy, (1993); in Behaviour of Defects at high temperature, ESIS Mechanical Engineering Publications, vol.15, pp.167-187

F. Rezaï-aria, Fatigue thermique et fatigue isotherme d'un alliage à base de cobalt : étude métallurgique de l'endommagement et modélisation, Thèse de doctorat ès Sciences Physiques, 1986.

F. Rezaï-aria, M. François, and L. Rémy, Thermal fatigue of MAR-M509 superalloy"; Fatigue Fract, Eng. Mater. Struc, pp.277-289, 1988.

F. Rezaï-aria and L. Rémy, An oxidation fatigue interaction damage model for thermal fatigue crack growth, Engineering Fracture Mechanics, vol.34, issue.2, pp.283-294, 1989.
DOI : 10.1016/0013-7944(89)90143-4

J. R. Rice, Mechanics of crack tips deformation and extension by fatigue"; Fatigue crack propagation; ASTM STP 415, American Society for Testing and Materials, pp.247-309, 1967.

E. L. Robinson, (1952); Transactions, American Society of Mechanical Engineering, vol.74, issue.5, pp.777-781, 1973.

D. Roux, Fragilisation du Superwaspaloy par l'hydrogène"; Thèse de doctorat ès Sciences Physiques, 1990.

S. Savalle and J. Chaboche, Calcul de viscoplasticité cyclique et de durée de vie d'une pièce axisymétrique du moteur HM.60 en alliage Waspaloy"; rapport technique n° 62, RY069, vol.07, p.86, 1765.

H. D. Solomon and L. F. Coffin, (1973); dans Fatigue at High Temperature; ASTM STP 520, pp.112-122

F. Soniak, Fissuration en fatigue d'un superalliage de la métallurgie des poudres, l'Astroloy : influence de la longueur de fissure et de la température, 1989.

D. A. Spera, NASA-TND-5485; National Aeronautics and Space Administration, 1969.

D. A. Spera, Thermal fatigue of materials and components"; ASTM STP 612, pp.3-9, 1976.

V. Srinivasan, Final report for period 1/10/83 -31/03, 1986.

J. E. Strawley, Wide range stress intensity factor expressions for ATM E399 standard fracture toughness, International Journal of Fracture, vol.12, pp.475-476, 1976.

S. Taira, (1973); dans Fatigue at Elevated Temperatures; ASTM STP 520; American Society for Testing and Materials; Philadelphia, pp.239-254

B. Tomkins, Fatigue crack propagation???an analysis, Philosophical Magazine, vol.5, issue.155, pp.1041-1066, 1968.
DOI : 10.1016/0001-6160(63)90010-5

E. Vasseur, Fatigue anisotherme et microstructutre de superalliages colonnaires"; Thèse de doctorat, 1993.

J. Weibull, Applied Mechanics, pp.293-297, 1951.

G. C. Wood, F. H. Stott, D. P. Whittle, Y. Shida, and B. D. Bastow, The high-temperature internal oxidation and intergranular oxidation of nickel-chromium alloys, Corrosion Science, vol.23, issue.1, pp.9-25
DOI : 10.1016/0010-938X(83)90056-2

D. A. Woodford and D. F. Mowbray, Effect of material characteristics and test variables on thermal fatigue of cast superalloys. A review, Materials Science and Engineering, vol.16, issue.1-2, pp.5-43, 1974.
DOI : 10.1016/0025-5416(74)90135-9

D. A. Woodford, Environmental damage of cast nickel base superalloy"; Metallurgical Transaction 12, p.299, 1983.