, 1 ? Corrélations d'image effectué par le logiciel Aramis en 3D Bibliographie Development of an interatomic potential appropriate for simulation of phase transformation in zirconium, p.349, 2007.
, Modelling and simulation of hot stamping, Thèse de doctorat, 2006.
, Simulation numérique par éléments finis en 3D du comportement thermomécanique au cours du traitement thermique d'aciers : application à la trempe de pièces forgées ou coulées, 2000.
, Etude thermo-mécanique et modélisation numérique de l'emboutissage à chaud de l'Usibor 1500, Thèse de doctorat, 2004.
, Optimisation of springback predicted by experimental and numerical approach by using response surface methodology, Journal of Materials Processing Technology, vol.173, issue.1, pp.101-110, 2006.
DOI : 10.1016/j.jmatprotec.2005.11.009
, Coupled model for the non-linear analysis of anisotropic sections subjected to general 3D loading. Part 1: Theoretical formulation, Computers & Structures, vol.84, issue.31-32, pp.2254-2263, 2006.
DOI : 10.1016/j.compstruc.2006.08.036
, Coupled model for the nonlinear analysis of sections made of anisotropic materials, subjected to general 3d loading. part 2 : Implementation and validation, Comput. Struct, vol.84, pp.2264-2276, 2006.
, Performances of the BBC2003 yield criterion when using data obtained from different mechanical tests, International conference of MTeM, 2003.
, Non-quadratic yield criterion for orthotropic sheet metals under plane-stress conditions, International Journal of Mechanical Sciences, vol.45, issue.5, pp.797-811, 2003.
DOI : 10.1016/S0020-7403(03)00139-5
, Plastic behavior and stretchability of sheet metals. Part I: A yield function for orthotropic sheets under plane stress conditions, International Journal of Plasticity, vol.5, issue.1, pp.51-66, 1989.
DOI : 10.1016/0749-6419(89)90019-3
, A six-component yield function for anisotropic materials, International Journal of Plasticity, vol.7, issue.7, pp.693-712, 1991.
DOI : 10.1016/0749-6419(91)90052-Z
, Yielding description for solution strengthened aluminum alloys, International Journal of Plasticity, vol.13, issue.4, pp.385-401, 1997.
DOI : 10.1016/S0749-6419(97)80005-8
, Linear transfomation-based anisotropic yield functions, International Journal of Plasticity, vol.21, issue.5, pp.1009-1039, 2005.
DOI : 10.1016/j.ijplas.2004.06.004
, On linear transformations of stress tensors for the description of plastic anisotropy, International Journal of Plasticity, vol.23, issue.5, pp.876-896, 2007.
DOI : 10.1016/j.ijplas.2006.10.001
, Orientation Effect on Mechanical Properties of Commercially Pure Titanium at Room Temperature, Metallurgical and Materials Transactions A, vol.39, issue.2, pp.276-285, 2007.
DOI : 10.1007/s11661-006-9040-2
, Validation expérimentale du modèle de calcul en calotte sphérique des plaques circulaires minces sous l'effet d'un gonflement hydraulique
, Modelling of anisotropic work-hardening behaviour of metallic materials subjected to strain-path changes, Computational Materials Science, vol.32, issue.3-4, pp.301-315, 2005.
DOI : 10.1016/j.commatsci.2004.09.038
, Characterization of the strain-induced plastic anisotropy of rolled sheets by using sequences of simple shear and uniaxial tensile tests, Journal of Materials Processing Technology, vol.174, issue.1-3
DOI : 10.1016/j.jmatprotec.2005.04.086
, Simple shear tests: Experimental techniques and characterization of the plastic anisotropy of rolled sheets at large strains, Journal of Materials Processing Technology, vol.172, issue.1, pp.96-103, 2006.
DOI : 10.1016/j.jmatprotec.2005.09.003
, Optimisation of shape and process parameters in metal forging using genetic algorithms, Journal of Materials Processing Technology, vol.146, issue.3, pp.356-364, 2004.
DOI : 10.1016/j.jmatprotec.2003.11.027
, Application of the theory of representation to describe yielding of anisotropic aluminum alloys, International Journal of Engineering Science, vol.41, issue.12
DOI : 10.1016/S0020-7225(03)00037-5
, Orthotropic yield criterion for hexagonal closed packed metals, International Journal of Plasticity, vol.22, issue.7, pp.1171-1194, 2006.
DOI : 10.1016/j.ijplas.2005.06.001
, A review of some plasticity and viscoplasticity constitutive theories, International Journal of Plasticity, vol.24, issue.10, pp.1642-1693, 2008.
DOI : 10.1016/j.ijplas.2008.03.009
, Stamping formability of pure titanium sheets, Journal of Materials Processing Technology, vol.170, issue.1-2, pp.181-186, 2005.
DOI : 10.1016/j.jmatprotec.2005.05.004
, Modeling the Bauschinger effect for sheet metals, part I: theory, International Journal of Plasticity, vol.18, issue.5-6, pp.571-595, 2002.
DOI : 10.1016/S0749-6419(01)00046-8
, Modeling the bauschinger effect for sheet metals, part II : Applications, Int. J. Plasticity, vol.18, pp.571-595, 2002.
, Numerical Simulation of Sheet Metal Forming Processes Using a New Yield Criterion, Key Engineering Materials, vol.344, pp.833-840, 2007.
DOI : 10.4028/www.scientific.net/KEM.344.833
, Stable stabilized finite element for 3d forming calculation, CEMEF, Rapport interne, 1996.
, A model to describe the anisotropic viscoplastic behaviour of Zircaloy-4 tubes, Journal of Nuclear Materials, vol.238, issue.2-3, pp.135-162, 1996.
DOI : 10.1016/S0022-3115(96)00450-3
, Apport de la tribométrie et des essais sur presse pilote pour la simulation numérique de l'emboutissage des tôles d'acier nues et revétues de zinc pur, 1996.
, Rotation of axes for anisotropic metal in FEM simulations, International Journal of Plasticity, vol.24, issue.3
DOI : 10.1016/j.ijplas.2007.03.015
, Universal anisotropic yield criterion based on superquadric functional representation : part 1. algorithm issues and accuracy analysis, Comp. Meth. Appl. Mech. Engn, vol.109, pp.73-93, 1993.
, Etude de la modélisation de la pose et de la tenue mécanique des assemblages par déformation plastique, 2008.
, A parametric description of orthotropic plasticity in metal sheets, International Journal of Plasticity, vol.10, issue.5, pp.431-449, 1994.
DOI : 10.1016/0749-6419(94)90008-6
, Developpement d'une méthode d'identification de paramètres par analyse inverse couplée avec un modèle éléments finis 3D, Thèse de doctorat, 2004.
, Modelling and prediction of mechanical properties for materials with hexagonal symmetry (zinc, titanium and zirconium alloys), Acta Materialia, vol.45, issue.10, pp.4041-4055, 1997.
DOI : 10.1016/S1359-6454(97)00099-2
, Identification automatique des paramètres rhéologiques par analyse inverse, Thèse de doctorat, 1996.
, Les déformations cumulées tensorielles, C.R. Acad Sci. Paris, vol.316, pp.1499-1504, 1993.
, Evaluation of identification methods for YLD2004-18p, International Journal of Plasticity, vol.24, issue.12, pp.2248-2277, 2008.
DOI : 10.1016/j.ijplas.2007.11.005
, Etude métallurgique d'alliages de titane pour application biomédicales, Thèse de doctorat, 2000.
, Contribution à la modélisation de la mise en forme des toles metalliques : Application au retour élastique et à la localisation, Thèse de doctorat, Ecole Nationale supérieures d'Arts et Métiers, 2007.
, Comparison of isotropic hardening and kinematic hardening in thermoplasticity, International Journal of Plasticity, vol.21, issue.7, pp.1435-1460, 2005.
DOI : 10.1016/j.ijplas.2004.07.002
, Combined thermodynamics approach for anisotropic, finite deformation overstress models of viscoplasticity, International Journal of Engineering Science, vol.46, issue.2, pp.119-130, 2008.
DOI : 10.1016/j.ijengsci.2007.09.008
, Spatial representation of evolving anisotropy at large strains, International Journal of Solids and Structures, vol.44, issue.10, pp.3514-3532, 2007.
DOI : 10.1016/j.ijsolstr.2006.10.002
, Description of evolving anisotropy at large strains, Mechanics of Materials, vol.39, issue.3, pp.267-282, 2007.
DOI : 10.1016/j.mechmat.2006.05.005
, A Theory of the Yielding and Plastic Flow of Anisotropic Metals, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.193, issue.1033, pp.281-297, 1948.
DOI : 10.1098/rspa.1948.0045
, Constitutive modelling of orthotropic plasticity in sheet metals, Journal of the Mechanics and Physics of Solids, vol.38, issue.3, pp.405-417, 1990.
DOI : 10.1016/0022-5096(90)90006-P
, A user-friendly theory of orthotropic plasticity in sheet metals, International Journal of Mechanical Sciences, vol.35, issue.1, pp.19-25, 1993.
DOI : 10.1016/0020-7403(93)90061-X
, Nonlinear Solid Mechanics : A continuum approach for engineering, 2000.
, A Generalized Isotropic Yield Criterion, Journal of Applied Mechanics, vol.39, issue.2, pp.607-609, 1972.
DOI : 10.1115/1.3422732
, Modélisation du procédé de fluotournage du tantale et du traitement thermique, Thèse de doctorat, 2009.
, Coupling between experimental measurements and polycrystal finite element calculations for micromechanical study of metallic materials, International Journal of Plasticity, vol.23, issue.9, pp.1512-1539, 2007.
DOI : 10.1016/j.ijplas.2007.01.009
, Constitutive modeling of orthotropic sheet metals by presenting hardening-induced anisotropy, Int. J. Plasticity, vol.23, pp.620-639, 2007.
, A novel quadratic yield model to describe the feature of multi-yield-surface of rolled sheet metals, Int. J. Plasticity, vol.23, pp.2004-2028, 2007.
, Efficient global optimization of expensive black-box functions, Journal of Global Optimization, vol.13, issue.4, pp.455-492, 1998.
DOI : 10.1023/A:1008306431147
, Viscoplasticité et microstructures d'un alliage de titane
, A general anisotropic using bounds and a transformation weighting tensor, J. Mech. Phys. Solids, vol.12, pp.1859-1886, 1993.
, Non-quadratic anisotropic potentials based on linear transformation of plastic strain rate, International Journal of Plasticity, vol.23, issue.8, pp.1380-1399, 2007.
DOI : 10.1016/j.ijplas.2007.01.006
, Numerical and experimental study of the strain localization during sheet forming operations, Thèse de doctorat, 2001.
, Texture and anistropy, 1998.
, Cup drawing of pure titanium sheet -finite element analysis and expérimental validation, Simulation of Materials Processing : Theory, Methods and Applications, pp.781-787, 2001.
, Simulation of the heating of billets including the microstructure evolution and thermal stresses, Proceding of AMT'98 on Advanced Materials and Technologies, pp.685-690, 1998.
, Yield Loci Calculation of Hexagonal Materials Using a Selfconsistent Polycrystalline Model, Textures and Microstructures, vol.26, pp.513-529, 1996.
DOI : 10.1155/TSM.26-27.513
, A numerical method for rapid estimation of drawbead restraining force based on non-linear, anisotropic constitutive equations, Int. J. Solids Struct, vol.45, pp.3375-3391, 2008.
, Constitutive modeling for anisotropic/asymmetric hardening behavior of magnesium alloy sheets : Application to sheet springback, Int. J. Plasticity, vol.25, pp.70-104, 2009.
, Study of plastic deformation in hexagonal metals : new developments
, Mécanique des matériaux solides, 1998.
, Simulation of springback, International Journal of Mechanical Sciences, vol.44, issue.1, pp.103-122, 2002.
DOI : 10.1016/S0020-7403(01)00083-2
, Modeling the microstructural evolutin during hot working of C-Mn and of Nb microalloyed steels using a physically based model, Thèse de doctorat, Royal Institute of Technology, 2006.
, Hot flow behavior of boron microalloyed steels, Materials Science and Engineering: A, vol.480, issue.1-2, pp.49-55, 2007.
DOI : 10.1016/j.msea.2007.06.067
, Introduction to the mechanics of a continuous medium, 1969.
, New explicit expressions of the Hill polarization tensor for general anisotropic elastic solids, International Journal of Solids and Structures, vol.45, issue.3-4, pp.757-769, 2008.
DOI : 10.1016/j.ijsolstr.2007.08.035
, Modélisation numérique par éléments finis de l'emboutissage, Thèse de doctorat, 1987.
, On the co-rotational finite element formulation for large deformation problems, Thèse de doctorat, 1983.
, An evaluation of some recent yield criteria for industrial simulations of sheet forming processes, International Journal of Mechanical Sciences, vol.50, issue.4, pp.774-787, 2008.
DOI : 10.1016/j.ijmecsci.2007.11.002
, Three-dimensional numerical simulation of the deep-drawing process using solid finite elements, Journal of Materials Processing Technology, vol.97, issue.1-3
DOI : 10.1016/S0924-0136(99)00345-3
, Yield criteria for anisotropic elasto-plastic metals
, Caractérisation et modélisation du comportement mécanique d'alliages de titane polycristallin
, Contribution à la simulation numérique tridimensionnelle du forgeage à chaud : étude du contact et calcul multigrille, 1999.
, Dislocation study of prismatic slip systems and their interactions in hexagonal close packed metals: application to zirconium, Acta Materialia, vol.52, issue.14, pp.4317-4328, 2004.
DOI : 10.1016/j.actamat.2004.05.048
, Finite element simulation of deep drawing of titanium sheet having high normal anisotropy, Simulation of Materials Processing : Theory, Methods and Applications, pp.775-779, 2001.
, Mechanical properties and deformation mechanisms of a commercially pure titanium, Acta Materialia, vol.47, issue.13
DOI : 10.1016/S1359-6454(99)00203-7
, An improvement of the BBC2000 yield criterion, Proceedings of the ESAFORM 2003 Conference, 2003.
, A continuum mechanics-based non-orthogonal constitutive model for woven composite fabrics, Composites Part A: Applied Science and Manufacturing, vol.36, issue.6, pp.859-874, 2005.
DOI : 10.1016/j.compositesa.2004.08.008
, Inverse analysis applied tothe evaluation of rheological and microstructural parameters in hot forming steels, Proceedings of NUMIFORM'98, pp.163-168, 1998.
, Through-process modelling of microstructure evolution in hot forming of steels, Journal of Materials Processing Technology, vol.125, issue.126, pp.53-62, 2002.
DOI : 10.1016/S0924-0136(02)00285-6
, Elastic-viscoplastic anisotropic modeling of textured metals and validation using the Taylor cylinder impact test, International Journal of Plasticity, vol.23, issue.6, pp.1001-1021, 2007.
DOI : 10.1016/j.ijplas.2006.10.008
, Orthotropic yield criteria for description of the anisotropy in tension and compression of sheet metals, International Journal of Plasticity, vol.24, issue.5, pp.847-866, 2008.
DOI : 10.1016/j.ijplas.2007.07.013
, Modeling texture, twinning and hardening evolution during deformation of hexagonal materials, Acta Materialia, vol.55, issue.6, pp.2137-2148, 2007.
DOI : 10.1016/j.actamat.2006.11.017
, Parameter identification for improved viscoplastic model considering dynamic recrystallization, International Journal of Plasticity, vol.21, issue.7
DOI : 10.1016/j.ijplas.2004.04.009
, Application of strain rate potentials with multiple linear transformations to the description of polycrystal plasticity, International Journal of Solids and Structures, vol.46, issue.9, pp.1966-1974, 2009.
DOI : 10.1016/j.ijsolstr.2009.01.011
, Parameter identification of advanced plastic strain rate potentials and impact on plastic anisotropy prediction, International Journal of Plasticity, vol.25, issue.3, pp.491-512, 2009.
DOI : 10.1016/j.ijplas.2008.03.006
, Dynamiques moléculaires des dislocations et comportement de matériaux anisotropes
, Analysis of work hardening and recrystallization during the hot working of steel using a statistically based internal variable model, Materials Science and Engineering: A, vol.339, issue.1-2, pp.1-9, 2001.
DOI : 10.1016/S0921-5093(02)00120-X
, An efficient parallel global optimization base on krigging property : practical approach apply to material parameters identification
, Shear testing of a sheet steel at wide range of strain rates and a constitutive relation with strain-rate and temperature dependence of the flow stress, International Journal of Plasticity, vol.17, issue.1, pp.87-115, 2001.
DOI : 10.1016/S0749-6419(00)00020-6
, Strain hardening of titanium: role of deformation twinning, Acta Materialia, vol.51, issue.14
DOI : 10.1016/S1359-6454(03)00239-8
, Strain hardening due to deformation twinning in ??-titanium: Constitutive relations and crystal-plasticity modeling, Acta Materialia, vol.53, issue.12, pp.3495-3502, 2005.
DOI : 10.1016/j.actamat.2005.04.014
, A formulation of anisotropic continuum elastoplasticity at finite strains. Part I: Modelling, International Journal of Plasticity, vol.22, issue.12, pp.2346-2365, 2006.
DOI : 10.1016/j.ijplas.2006.04.002
, On a formulation for anisotropic elastoplasticity at finite strains invariant with respect to the intermediate configuration, Journal of the Mechanics and Physics of Solids, vol.55, issue.11, pp.2404-2426, 2007.
DOI : 10.1016/j.jmps.2007.03.013
, A return mapping algorithm for plane stress elastoplasticity, International Journal for Numerical Methods in Engineering, vol.33, issue.18, pp.649-670, 2005.
DOI : 10.1002/nme.1620220310
, On the use of homogeneous polynomials to develop anisotropic yield functions with applications to sheet forming, International Journal of Plasticity, vol.24, issue.6, pp.915-944, 2008.
DOI : 10.1016/j.ijplas.2007.07.016
, Inverse analysis for identification of rheological and friction models in metal forming, Computer Methods in Applied Mechanics and Engineering, vol.195, issue.48-49, pp.6778-6798, 2006.
DOI : 10.1016/j.cma.2005.03.015
, Estimation of rheological and friction parameters in hot forming processes as inverse problem, Proceedings of the 4 th international ESAFORM, pp.191-194, 1998.
, Use of the modified maximum force criterion for necking analysis during sheet bulging. 10th international Metal Forming Conference, pp.229-234, 2004.
, Contribution à l'étude de la simulation du procédé d'hydroformage, Thèse de doctorat, 2005.
, Occurence of strain path changes in a two-stage deep drawing process, Journal of Materials Processing Technology, vol.210, issue.2, pp.226-232, 2010.
DOI : 10.1016/j.jmatprotec.2009.09.004
, Un algorithme efficace d'int??gration plastique pour un mat??riau ob??issant au crit??re anisotrope de Hill, Comptes Rendus Mecanique, vol.332, issue.11, pp.901-906, 2004.
DOI : 10.1016/S1631-0721(04)00184-6
, Contribution à la caractérisation et à la modélisation de l'influence de la vitesse et de la température sur le comportement en découpage de tôles minces, Thèse de doctorat, 2006.
, Cyclic behavior modeling of a tempered martensitic hot work tool steel, International Journal of Plasticity, vol.22, issue.3, pp.459-496, 2006.
DOI : 10.1016/j.ijplas.2005.03.007
, Effect of normal anisotropy on springback, Journal of Materials Processing Technology, vol.190, issue.1-3, pp.300-304, 2007.
DOI : 10.1016/j.jmatprotec.2007.02.033
, (1??012) Twinning nucleation mechanisms in hexagonal-close-packed crystals, Acta Materialia, vol.57, issue.18, pp.5521-5530, 2009.
DOI : 10.1016/j.actamat.2009.07.047
, Prediction of six or eight ears in a drawn cup based on a new anisotropic yield function, International Journal of Plasticity, vol.22, issue.1, pp.174-193, 2006.
DOI : 10.1016/j.ijplas.2005.03.013
, A study of active deformation systems in titanium alloys: dependence on alloy composition and correlation with deformation texture, Materials Science and Engineering: A, vol.344, issue.1-2, pp.20-30, 2003.
DOI : 10.1016/S0921-5093(02)00421-5
, Anisothermal cyclic plasticity modelling of martensitic steels, International Journal of Fatigue, vol.24, issue.6, pp.635-648, 2002.
DOI : 10.1016/S0142-1123(01)00182-7
, The gtn damage model based on hill'48 anisotropic yield criterion and its application in sheet metal forming, Compuational Materials Science, vol.44, pp.1013-1021, 2009.