A. Flavius and . Ardelean, The Measurement of the straightness in the case of long guideways, using modern measurement methods, namely, the laser, ANNALS of the ORADEA UNIVERSITY, vol.VII, 2008.

K. P. Birch and M. J. Downs, ?An updated Edlen equation for the refractive Index of air? Metrologia, pp.155-162, 1993.

L. [. Boripatkosol and . Lahousse, LNE activities in nanometrology: flatness reference calibration algorithm, th EUSPEN International Conference, pp.18-22, 2008.

J. Burke, . Bozenko, . Bob, R. Oreb, and . Netterfield, Customized three-flat calibration method for a 320 mm aperture Fizeau interferometer with vertical optical axis

A. Campbell, Measurement of lathe Z-slide straightness and parallelism using a flat land, Precision Engineering, vol.17, issue.3, pp.207-210, 1995.
DOI : 10.1016/0141-6359(95)00001-T

[. Cayere, Métrologie des angles". Extraits de la "machine moderne" de juin 1953 à septembre 1954

[. Cayere, Mesure des défauts d'une règle-étalon". Extraits de "Manipulation de Métrologie mécanique" de décembre 1956 à mai 1957

C. [. Hossein, H. S. Lim, and M. Saied, Straightness and flatness tolerance evaluation : an optimization approach, Precision Engineering, vol.18, pp.30-37, 1996.

[. Coorevits, Contribution au développement des techniques d'autocalibrage appliquées aux machines à mesurer tridimensionnelles, Thèse de Doctorat ENSAM No90, ENAM. 0003, 1990.

S. J. Cosijns, Displacement laser interferometry with subnanometer uncertainty, Thèse de doctorat Technische Universiteit, 2004.

J. David, T. Coorevits, G. Vailleau, and S. Leleu, Métrologie des marbres : méthode de calcul et incertitudes, Congrès international de Métrologie, 2001.

. [. Demarest-meas, High-resolution, high-speed, low data age uncertainty, heterodyne displacement measuring interferometer electronics, Measurement Science and Technology, vol.9, issue.7
DOI : 10.1088/0957-0233/9/7/003

N. [. Désenfant and . Fischer, Evaluation de l'incertitude en utilisant les simulations de monte carlo, 13 e Congrès International de Métrologie, pp.18-21, 2007.

F. [. Ducourtieux and . Larsonnier, Le programme de recherche et developpement en nanometrologie du BNM-LNE, 11 e Congrès International de Métrologie, pp.20-23, 2003.

B. Edlen, The Refractive Index of Air " Metrologia, pp.71-80, 1965.

[. Elster, I. Weingärtner, and M. Schulz, Coupled distance sensor systems for high-accuracy topography measurement: Accounting for scanning stage and systematic sensor errors, Precision Engineering, vol.30, issue.1, pp.32-38, 2006.
DOI : 10.1016/j.precisioneng.2005.04.001

]. W. Tyler, E. , C. J. Evans, and L. Z. Shao, Uncertainty estimation for multiposition form error metrology, Precision Engineering, vol.21, issue.2-3, pp.72-82, 1997.
DOI : 10.1016/S0141-6359(97)00058-5

C. J. Evans, R. J. Hocken, and W. T. Estler, Self-Calibration: Reversal, Redundancy, Error Separation, and ???Absolute Testing???, CIRP Annals - Manufacturing Technology, vol.45, issue.2, pp.617-634, 1996.
DOI : 10.1016/S0007-8506(07)60515-0

Y. [. Fan and . Zhao, A laser straightness measurement system using optical fiber and modulation techniques, International Journal of Machine Tools and Manufacture, vol.40, issue.14, pp.2073-2081, 2000.
DOI : 10.1016/S0890-6955(00)00040-7

[. Nanotech, Mesures sans contact par capteurs capacitifs", Document technique constructeur, 1995.

W. Gao and S. Kiyono, High accuracy profile measurement of a machined surface by the combined method, Measurement, vol.19, issue.1, pp.55-64, 1996.
DOI : 10.1016/S0263-2241(96)00066-8

[. Gao, S. Kiyono, and T. Nomura, A new multiprobe method of roundness measurements, Precision Engineering, vol.19, issue.1, pp.37-45, 1996.
DOI : 10.1016/0141-6359(96)00006-2

W. Gao and S. Kiyono, On-machine roundness measurement of cylindrical workpieces by the combined three-point method, Measurement, vol.21, issue.4, pp.147-156, 1997.
DOI : 10.1016/S0263-2241(97)00060-2

[. Gao, S. Kiyono, and T. Sugawara, High-accuracy roundness measurement by a new error separation method, Precision Engineering, vol.21, issue.2-3, pp.123-133, 1997.
DOI : 10.1016/S0141-6359(97)00081-0

H. Yokoyama, S. Kojima, and . Kiyono, Precision measurement of cylinder straightness using a scanning multi-probe system, Precision Engineering, vol.26, issue.3, pp.279-288, 2002.

[. Gao, P. S. Huang, T. Yamada, and S. Kiyono, A compact and sensitive two-dimensional angle probe for flatness measurement of large silicon wafers, Precision Engineering, vol.26, issue.4, pp.396-404, 2002.
DOI : 10.1016/S0141-6359(02)00121-6

E. James and . Gentle, Random Number Generation and Monte Carlo methods, Statistics and Computing

[. Giacomo, R. De-cássia-alves-de-magalhães, and F. T. Paziani, Reversal technique applied to the measurement of straightness errors, ABCM Symposium series in Mechatronics, vol.1, pp.479-487, 2004.

Y. [. Gou, Z. X. Chu, and . Li, A geometric theory of form, profile, and orientation tolerances, Precision Engineering, vol.23, issue.2, pp.79-93, 1999.
DOI : 10.1016/S0141-6359(98)00028-2

H. François, Determination des incertitudes de mesures sur machines à mesurer tridimensionnelles : Application aux engrenages, Thèse de Doctorat ENSAM, 2007.

. [. Heydemann, Determination and correction of quadrature fringe measurement errors in interferometers, Applied Optics, vol.20, issue.19, pp.3382-3384, 1981.
DOI : 10.1364/AO.20.003382

[. Kiyono and W. Gao, Profile measurement of machined surface with a new differential method, Precision Engineering, vol.16, issue.3, pp.212-218, 1994.
DOI : 10.1016/0141-6359(94)90127-9

K. Tatsuya, E. Kazuhiro, H. Yasuo, and U. Kenji, Evaluation of Error Propagation in Profilometry using Stitching, 9th International Workshop on Accelerator Alignment, 2006.

F. [. Kunzmann and . Wäldele, On Testing Coordinate Measuring Machines (CMM) with Kinematic Reference Standards (KRS), CIRP Annals - Manufacturing Technology, vol.32, issue.1, 1983.
DOI : 10.1016/S0007-8506(07)63441-6

. Lab, Guide d'évaluation des incertitudes de mesures des analyses de biologie médicale, 2006.

S. L. Lahousse and . Ducourtieux, Programme de recherche et développement du LNE en nanométrologie : Derniers résultats, 12 e Congrès International de Métrologie, pp.20-23, 2005.

[. Lahousse, Contribution à la conception d'une machine à mesurer de précision nanométrique -Architecture globale ? Dispositions constructives - Etalonnage de références planes, Thèse de doctorat ENSAM, 2005.

[. Lahousse and J. David, Application d'une nouvelle conception d'architecture à une machine de mesure de résolution nanométrique

S. [. Lahousse and . Ducourtieux, Z calibration of the LNE ultra precision coordinate measuring machine, th EUSPEN International Conference, pp.20-24, 2007.

S. [. Larsonnier and . Ducourtieux, Derniers résultats du programme de recherche et de développement du LNE en nanométrologie dimensionnelle, 13 e Congrès International de Métrologie, pp.18-21, 2007.

[. Suk and L. , Approaching Minimum Zone Method for Flatness and Straightness Error Calculation, JSME International Journal, vol.39, issue.3, 1996.

J. [. Leleu, G. P. David, and . Vailleau, La mesure des angles au BNM-LNE création d'une nouvelle référence de mesure angulaire, 11 e Congrès International de Métrologie, pp.20-23, 2003.

[. Li, S. Li, and J. Yu, High-resolution error separation technique for in-situ straightness measurement of machine tools and workpieces, Mechatronics, vol.6, issue.3, pp.337-347, 1996.
DOI : 10.1016/0957-4158(95)00077-1

. Lip and L. Geneviève, Mesures dimensionnelles par interférométrie laser, pp.1-17

S. Liu, K. Watanabe, X. Chen, S. Takahashi, and K. Takamasu, Profile measurement of a wide-area resist surface using a multi-ball cantilever system, Precision Engineering, vol.33, issue.1, pp.50-55, 2009.
DOI : 10.1016/j.precisioneng.2008.03.004

A. Magalini and D. Vetturi, Laser interferometry for straightness measurement in a weakly controlled environment, XVIII IMEKO WORLD CONGRESS, pp.17-22, 2006.

E. Nf, A. Iso-1101-]-norme-française, and . Nf, Spécification géométrique des produits (GPS) ? Tolérancement géométrique ? Tolérancement de forme, orientation, position et battement, 2006.

J. [. Pahk and . Kim, Application of microcomputer for assessing the probe lobing error and geometric errors of CMMs using commercial ring gauges, The International Journal of Advanced Manufacturing Technology, vol.32, issue.1, pp.208-218, 1995.
DOI : 10.1007/BF01179349

T. Fabricio, D. Paziani, R. H. Giacomo, and . Tsunaki, Development of an Automated and Dedicated Measuring System for Straightness Evaluation, J. of the Braz. Soc. Of Mech. Sci. & Eng Vol, vol.XXIX, issue.3, pp.290-298, 2007.

M. Priel and S. Amarouche, Utiliser les résultats des essais d'aptitude dernière méthode alternative pour l'évaluation des incertitudes- Application à la biologie médicale, 13 e Congrès International de Métrologie, pp.18-21, 2007.

R. Cédric and L. Béatrice, Guide méthodologique pour l'estimation des incertitudes en analyse chimique, Annexe au compte rendu de fin d'opération d'une recherche financée par le Ministère de la Recherche ? Projet METREAU, 2003.

R. Olinde, Des lois géométriques qui régissent les déplacements d'un système solide dans l'espace, et de la variation des coordonnées provenant de ces déplacements considérés indépendamment des causes qui peuvent les produire, Journal de mathématiques pures et appliquées 1 er série, pp.380-440, 1840.

H. [. Sakuma and . Wada, Straigtness measurement using a heterodyne moir?? method, Precision Engineering, vol.9, issue.1, pp.19-22, 1987.
DOI : 10.1016/0141-6359(87)90004-3

[. Schulz, Traceable Multiple Sensor Systems for High-Accuracy Form Measurement, DGaO Proceedings, pp.1614-8436, 2005.

. [. Weber, Beeinträchtigung der Genauigkeit von Koordinatenmessungen durch die Umgebung, VDI Berichte, pp.524-107

[. Weingärtner and C. Elster, System of four distance sensors for high-accuracy measurement of topography, Precision Engineering, vol.28, issue.2, pp.164-70, 2004.
DOI : 10.1016/j.precisioneng.2003.10.001

S. Felix-chretièn-lucien and . Wetzels, Laser based displacement calibration with nanometer accuracy, 1998.

. [. Whitehouse, Some theorical aspects of error separation techniques in surface metrology, Journal of Physics E: Scientific Instruments, vol.9, 1976.

[. Zi-qiang and L. Sheng-yi, Exact straightness reconstruction for on-machine measuring precision workpiece, Precision Engineering, vol.29, issue.4, pp.456-466, 2005.

[. Zi-qiang and L. Sheng-yi, High accuracy error separation technique for onmachine measuring straightness, Precision Engineering, vol.30, issue.2, pp.192-200, 2006.

Z. Qing, K. C. Fan, and Z. Li, Evaluation method for spatial straightness errors based on minimum zone condition, Precision Engineering, vol.23, pp.264-272, 1999.