.. Courbes-contraintes-déformations????, 76 3.2.1.2.a Nuance standard???, p.78

.. Analyse-des-modes-de-rupture???, 99 3.2.5.2.a La nuance standard???, p.100

.. Analyse-des-faciès-de-rupture???, 101 3.2.5.3.a La nuance standard???

.. Présentation-de-l-'essai-de-roulement, 112 4.1.1.1 Tribomètre rotatif et montage d'essai, ., p.115

E. Présentation-des, 135 4.2.1.1 Présentation du banc d'essai de chocs et glissement, ., p.138

.. Simulation-numérique-du-contact-pion-disque, 142 4.2.2.1 Description du modèle de simulation, Interaction et conditions aux limites

.. Présentation-et-analyse-des-résultats-numériques, 145 4.2.2.2.a Contact sans glissement, p.146

.. Comparaison-avec-un-acier-À-rail, 160 4.2.3.4.b Évolution de la largeur de contact, p.163

W. Zwanenburg, A model for the life expectancy of railway switches and crossings for maintenance and renewal planning in asset management systems. 11 éme congrés de Computers in Railways, 2008.

I. Anastasopoulos and G. Gazetas, Analysis of failures of guardrail base-plates in scissors crossovers of the Athens Metro: The role of foundation?structure interaction. Engineering Failure Analysis, pp.14-765, 2007.

F. Maratray, High Carbon Manganese Austenitic Steels: The International Manganese Institute, 1995.

G. Collette, C. Crussard, A. Kohn, J. Plateau, G. Pomey et al., Contribution ?? l?????tude des transformations des aust??nites ?? 12 % Mn, Revue de M??tallurgie, vol.54, issue.6, pp.433-481, 1957.
DOI : 10.1051/metal/195754060433

R. Hill, The mathematical theory of plasticity, pp.287-294, 1950.

D. Tabor, The hardness of solids, Reviews of Physics in Technology, vol.1, issue.3, 1951.
DOI : 10.1088/0034-6683/1/3/I01

N. Tsujimoto, Casting practice of abrasion resistant austenitic manganese steel, AFS international Cast Metals Journal, 1979.

S. A. Balogun, D. E. Esezobor, and J. , Agunsye : Effect of melting temperature on the wear characteristics of austenitc maganese steel, Journal of minerals & materials characterization & engineering, vol.3, pp.277-289, 2008.

G. Hily, Les aciers à moyenne et haute teneur en manganèse. Revue de l'industrie minerale, pp.172-184, 1970.

E. Bayraktar, F. A. Khalid, and C. , Deformation and fracture behaviour of high manganese austenitic steel, Journal of Materials Processing Technology, vol.147, issue.2, pp.145-154, 2004.
DOI : 10.1016/j.jmatprotec.2003.10.007

W. S. Owen and M. Grujicic, Grain aging of austenitic Hadfield manganese steel, Acta, vol.47, issue.1, pp.111-126, 1999.

B. Hutchinson and N. Ridley, On dislocation accumulation and work hardening in Hadfield steel, Scripta Materialia, vol.55, issue.4, pp.299-302, 2006.
DOI : 10.1016/j.scriptamat.2006.05.002

Y. N. Petrov, V. G. Gavriljuk, H. Berns, and F. Schmalt, Surface structure of stainless and Hadfield steel after impact wear, Wear, vol.260, issue.6, pp.260-687, 2006.
DOI : 10.1016/j.wear.2005.04.009

F. Montheillet, Métallurgie en mise en forme, Article M, vol.600, 1996.

O. Bouaziz, S. Allain, and C. Scott, Effect of grain and twin boundaries on the hardening mechanisms of twinning-induced plasticity steels, Scripta Materialia, vol.58, issue.6, pp.484-487, 2008.
DOI : 10.1016/j.scriptamat.2007.10.050

R. Ueji, N. Tsuchid, D. Terada, N. Tsuji, C. Y. Tanaka et al., Takemura and K. Kunishige Tensile properties and twinning behavior of high manganese austenitic steel with finegrained structure, Scripta Materialia, pp.59-963, 2008.

C. M. Taotsung-shun, J. G. Wan, and . Byrne, A study of work hardening in austenitic Fe- Mn-C and Fe-Mn-C-Al alloys, Acta Materialia, vol.12, pp.3407-3412, 1992.

Y. Lu, B. Hutchinson, D. A. Molodov, and G. Gottstein, Effect of deformation and annealing on the formation and reversion of e-martensite in an Fe? Mn?C alloy, Acta Materialia, pp.58-3079, 2010.

L. Bracke, L. Kestensa, and J. Penning, Transformation mechanism of ?????-martensite in an austenitic Fe???Mn???C???N alloy, Scripta Materialia, vol.57, issue.5, pp.385-388, 2007.
DOI : 10.1016/j.scriptamat.2007.05.003

X. Liang, J. R. Mcdermid, O. Bouaziz, X. Wang, J. D. Embury et al., Microstructural evolution and strain hardening of Fe???24Mn and Fe???30Mn alloys during tensile deformation, Acta Materialia, vol.57, issue.13, pp.3978-3988, 2009.
DOI : 10.1016/j.actamat.2009.05.003

R. W. Smith, W. B. De-monte, and . Mackay, RETRACTED: Development of high-manganese steels for heavy duty cast-to-shape applications, Proc. Technol, pp.153-154, 2004.
DOI : 10.1016/j.jmatprotec.2004.04.136

D. Canadinc, H. Sehitoglu, H. J. Maier, and Y. I. Chumlyakov, Strain hardening behavior of aluminum alloyed Hadfield steel single crystals, Acta Materialia, vol.53, issue.6, pp.1831-1842, 2005.
DOI : 10.1016/j.actamat.2004.12.033

D. Canadine, H. Sehitoglu, H. J. Maier, D. Niklasch, and Y. , Chumlyakov : Orientation evolution in Hadfield steel single crystals under combined slip and twinning, International Journal of Solids and Structures, pp.44-78, 2007.

D. Canadinc, H. Sehitoglu, and K. , Analysis of surface crack growth under rolling contact fatigue, International Journal of Fatigue, vol.30, issue.9, pp.1678-1689, 2008.
DOI : 10.1016/j.ijfatigue.2007.11.002

D. Canadinc, C. Efstathiou, and H. , Sehitoglu : On the negative strain rate sensitivity of Hadfield steel, Scripta Materialia, issue.10, pp.59-1103, 2008.

I. Karaman, H. Sehitoglu, K. Gali, Y. I. Chumlyakov, and H. J. Maier, Deformation of single crystal Hadfield steel by twinning and slip, Acta Materialia, vol.48, issue.6, pp.1345-1359, 2000.
DOI : 10.1016/S1359-6454(99)00383-3

I. Karaman, H. Sehitoglu, A. J. Beaudoin, Y. I. Chumlyakov, H. J. Maier et al., Modeling the deformation behaviour of Hadfield steel single and polycrytals due to twinning and slip, Acta, vol.48, pp.2031-2047, 2000.

J. L. Bucaille, Simulation numérique de l'indentation et de la rayure des verres organiques, Thèse de doctorat en Sciences et Génie des Matériaux. Ecole des Mines de Paris, 2001.

W. Yan, L. Fang, K. Suna, and Y. Xu, Effect of surface work hardening on wear behaviour of Hadfield steel, Materials Science and Engineering, vol.A, pp.460-461, 2007.

S. Bahattacharyya, A friction and wear study of hadfield manganese steel, Wear, vol.9, issue.6, pp.451-461, 1966.
DOI : 10.1016/0043-1648(66)90136-0

N. Jost and I. Schmidt, Friction-induced martensitic transformation in austenitic manganese steels, Wear, vol.111, issue.4, pp.377-389, 1986.
DOI : 10.1016/0043-1648(86)90134-1

U. Zerbst, R. Lundén, K. Edel, and R. A. , Smith : Introduction to the damage tolerance behaviour of railway rails ? a review, Engineering Fracture Mechanics, pp.76-2563, 2009.

A. Kapoor, F. J. Franklin, S. K. Wong, and M. , Ishida : Surface roughness and plastic flow in rail wheel contact, Wear, pp.253-257, 2002.

M. Pau, F. Ayrich, and F. Ginesu, Distribution of contact pressure in wheel???rail contact area, Wear, vol.253, issue.1-2, pp.265-274, 2002.
DOI : 10.1016/S0043-1648(02)00112-6

J. Xiaoyu and J. Xuesong, Numerical simulation of wheel rolling over rail at highspeeds . Wear : 262, pp.666-671, 2007.

P. Gullers, L. Andersson, and R. Lundén, High-frequency vertical wheel???rail contact forces???Field measurements and influence of track irregularities, Wear, vol.265, issue.9-10, pp.1472-1478, 2008.
DOI : 10.1016/j.wear.2008.02.035

F. D. Fisher and M. Wiest, Approximate Analytical Model for Hertzian Elliptical Wheel/Rail or Wheel/Crossing Contact Problems, Journal of Tribology, vol.130, issue.4, 2008.
DOI : 10.1115/1.2958074

M. Wiest, W. Daves, F. D. Fischer, and H. Ossberger, Deformation and damage of a crossing nose due to wheel passages, Wear, vol.265, issue.9-10, pp.1431-1438, 2008.
DOI : 10.1016/j.wear.2008.01.033

M. Wiest, E. Kassa, W. Daves, J. C. Nielsen, and H. Ossberger, Assessment of methods for calculating contact pressure in wheel-rail/switch contact, Wear, vol.265, issue.9-10, pp.265-1439, 2008.
DOI : 10.1016/j.wear.2008.02.039

P. Pointner, High strength rail steels???The importance of material properties in contact mechanics problems, Wear, vol.265, issue.9-10, pp.1373-1379, 2008.
DOI : 10.1016/j.wear.2008.03.015

Y. Satoh and K. , Effect of rail grinding on rolling contact fatigue in railway rail used in conventional line in Japan, Wear, vol.265, issue.9-10, pp.1342-1348, 2008.
DOI : 10.1016/j.wear.2008.02.036

F. J. Franklin, G. Weed, A. Kapoor, and E. J. , Hiensch : Rolling contact fatigue and wear behaviour of the infrastar two-material rail, pp.258-1048, 2005.

W. R. Tyfour, J. H. Beynon, and A. Kapoor, The steady state wear behaviour of pearlitic rail steel under dry rolling-sliding contact conditions, Wear, vol.180, issue.1-2, pp.79-89, 1995.
DOI : 10.1016/0043-1648(94)06533-0

J. W. Ringsberg, M. Loo-morrey, B. L. Josefson, A. Kapoor, and J. H. , Prediction of fatigue crack initiation for rolling contact fatigue, International Journal of Fatigue, vol.22, issue.3, pp.205-215, 2000.
DOI : 10.1016/S0142-1123(99)00125-5

L. Deters and M. Proksch, Friction and wear testing of rail and wheel material, Wear, vol.258, issue.7-8, pp.981-991, 2005.
DOI : 10.1016/j.wear.2004.03.045

M. Hiensch, P. Larsson, O. Nilsson, D. Levy, A. F. Kapoor et al., Lennart Josefson : Two-material rail development: field test results regarding rolling contact fatigue and squeal noise behaviour, Wear, pp.258-964, 2005.
DOI : 10.1016/j.wear.2004.03.067

R. I. Carroll and J. H. Beynon, Decarburisation and rolling contact fatigue of a rail steel, Wear, vol.260, issue.4-5, pp.523-537, 2006.
DOI : 10.1016/j.wear.2005.03.005

J. E. Garnham and C. L. Davis, The role of deformed rail microstructure on rolling contact fatigue initiation, Wear, vol.265, issue.9-10, pp.1363-1372, 2008.
DOI : 10.1016/j.wear.2008.02.042

D. T. Eadie, D. Elvidge, K. Oldknow, R. Stock, P. Pointner et al., The effects of top of rail friction modifier on wear and rolling contact fatigue: Full-scale rail???wheel test rig evaluation, analysis and modelling, Wear, vol.265, issue.9-10, pp.265-1222, 2008.
DOI : 10.1016/j.wear.2008.02.029

Y. B. Guo and A. W. Warren, The impact of surface integrity by hard turning vs. grinding on fatigue damage mechanisms in rolling contact, Surface & Coatings Technology : 203, pp.291-299, 2008.
DOI : 10.1016/j.surfcoat.2008.09.005

D. Canadinc, H. Sehitoglu, and K. , Analysis of surface crack growth under rolling contact fatigue, International Journal of Fatigue, vol.30, issue.9, pp.1678-1689, 2008.
DOI : 10.1016/j.ijfatigue.2007.11.002

C. Richard, Y. Liu, and . Choi, Rolling contact fatigue life model incorporating residual stress scatter, International Journal of Mechanical Sciences, vol.50, pp.1572-1577, 2008.

T. H. Middeham, Some alloy addition to manganese steel. Alloy metals review, 1964.

L. Moulin, M. Lacoude, R. Tricot, and A. , Gueussier : Contribution à l'étude des austénites au manganèse à écrouissabilité améliorée, pp.465-472, 1970.

B. Lambert, P. Poyet, and P. , Dancoisne : Etude d'une fonte malléable austénitique au manganèse. Fonderie : 342, 1975.

G. I. Silman, N. I. Pristuplyuk, and M. S. , Proltsov : Effect of vanadium on the structure and properties of high manganese steels, Met. Sci. Heat Treatment Met, issue.2, pp.22-124, 1980.

D. C. Richardson, W. B. Mackay, and R. W. , Smith : An improved Hadfield steel for use in railway castings. Solidification Technology, The Metals Society, pp.409-413, 1981.

H. L. Arnson and F. Borik, Optimizing the thoughness and abrasion resistance of as cast austenitic 6Mn-1Mo, 8Mn-1Mo and 12Mn-1Mo steels. Climax molybdenium company of Michigan, 1978.

J. Dodd, Production, utilisation et développement des alliages résistant à l'abrasion. Tendance actuelle aux états unis. Industrie minérale, 1976.

C. Gouin, Manganese steel that don't require heat treatment. Climax molybdenium company of Michigan, 1976.

F. B. Pickering, Some beneficial effect of nitrogen on steel, dans HNS 88, High nitrogen steels, J.Foct, H.Hendry. Inst. Met. London, 1989.

H. Berns, Manufacture and application of high nitrogen steels, ISIJ international, issue.7, pp.36-909, 1996.

C. Iglesias, G. Solórzano, and B. Schulz, Effect of low nitrogen content on work hardening and microstructural evolution in Hadfield steel, Materials Characterization, vol.60, issue.9, pp.14-63, 2007.
DOI : 10.1016/j.matchar.2009.03.015

T. S. Wang, R. J. Hou, B. Lv, M. Zhang, and F. C. Zhang, Microstructure evolution and deformation mechanism change in 0, 04N steel during compressive deformation, pp.98-106, 2007.

C. Efstathiou and H. Sehitoglu, Strengthening Hadfield steel welds by nitrogen alloying, Materials Science and Engineering: A, vol.506, issue.1-2, pp.174-179, 2009.
DOI : 10.1016/j.msea.2008.11.057

D. Michalon and G. Mazet, Mise au point d???un proc??d?? de conditionnement des aciers au mangan??se pour r??soudre les probl??mes d???usure en pr??sence d???abrasif, Revue de M??tallurgie, vol.73, issue.10, 1976.
DOI : 10.1051/metal/197673100711

J. Mendez, M. Ghoreshy, W. B. Mackay, T. J. Smith, and R. W. , Smith : Weldability of austenitic manganese steel, Journal of Materials Processing Technology, pp.153-154, 2004.

C. Hanyaloglu, B. Aksakal, and J. D. Bolton, Production and indentation analysis of WC/Fe???Mn as an alternative to cobalt-bonded hardmetals, Materials Characterization, vol.47, issue.3-4, pp.47-315, 2001.
DOI : 10.1016/S1044-5803(02)00181-X

G. Zhang, J. Xing, and Y. Gao, Impact wear resistance of WC/Hadfield steel composite and its interfacial characteristics, Wear, vol.260, issue.7-8, pp.728-734, 2006.
DOI : 10.1016/j.wear.2005.04.010

L. Fouilland-paill, M. Gerland, and P. , Cyclic behaviour of a 316L stainless steel hardened by an explosive treatment, Materials Science and Engineering: A, vol.201, issue.1-2, pp.32-39, 1995.
DOI : 10.1016/0921-5093(94)09750-X

L. Remy, Temperature variation of the intrinsic stacking faults energy of a high manganese austenitic steel. Acta metallurgica, pp.173-179, 1977.

L. Remy and A. Pinneau, Twninning and strain induced fcc-hcp transformation in the Fe-Mn-Cr-C system. Material science and engineering, pp.99-107, 1977.

S. Allain, J. Chateau, and O. Bouaziz, A physical model of the twinning-induced plasticity effect in a high manganese austenitic steel, Materials Science and Engineering: A, vol.387, issue.389, pp.387-389, 2004.
DOI : 10.1016/j.msea.2004.01.060

S. Allain, J. Chateau, O. Bouaziz, S. Migot, and N. , Guelton : Correlation between the calculated stacking fault energy and the plasticity mechanisms in Fe-Mn-C alloys, Materials Science and Engineering, vol.A, pp.387-389, 2004.

S. Allain, J. Chateau, D. Dahmoun, and O. , Bouaziz : Modeling of mechanical twinning in a high manganese content austenitic steel, Materials Science and Engineering, vol.A, pp.387-389, 2004.

T. A. Lebedkin, M. A. Lebyodkin, J. Ph, A. Chateau, and . Jacques, Allain ; On the mechanism of unstable plastic flow in an austenitic FeMnC TWIP steel, S. Materials Science and Engineering A, vol.519, pp.1-2, 2009.

D. Barbier, N. Geya, S. Allain, N. Bozzolo, and M. Humbert, Analysis of the tensile behaviour of a TWIP steel based on the texture and microstructure evolutions, Materials Science and Engineering, pp.500-196, 2009.

A. Dumay, J. Chateau, S. Allain, S. Migot, and O. Bouaziz, Influence of addition elements on the stacking-fault energy and mechanical properties of an austenitic Fe???Mn???C steel, Materials Science and Engineering: A, vol.483, issue.484, pp.483-484, 2008.
DOI : 10.1016/j.msea.2006.12.170

D. Canadinc, H. Sehitoglu, and H. J. Maier, The role of dense dislocation walls on the deformation response of aluminum alloyed hadfield steel polycrystals, Materials Science and Engineering: A, vol.454, issue.455, pp.454-455, 2007.
DOI : 10.1016/j.msea.2006.11.122

M. Abbasi, S. Kheirandish, and Y. Kharrazi, Jalal Hejazi : The fracture and plastic deformation of aluminum alloyed Hadfield steels, Materials Science and Engineering, vol.A, pp.513-514, 2009.

M. Abbasi, S. Kheirandish, and Y. Kharrazi, Jalal Hejazi : On the comparison of the abrasive wear behavior of aluminium alloyed and standard Hadfield steels, Wear, pp.268-202, 2010.

C. M. Taotsung-shun, J. G. Wan, and . Byrne, A study of work hardening in austenitic Fe, Acta Metallurgica et Materialia, pp.40-3407, 1992.

O. Bouaziz and N. , Guelton : Modelling of TWIP effect on work-hardening, Materials Science and Engineering, vol.A, pp.319-321, 2001.

R. Ueji, N. Tsuchida, D. Terada, N. Tsuji, Y. Tanaka et al., Kunishige : Tensile properties and twinning behavior of high manganese austenitic steel with finegrained structure, Scripta Materialia, issue.9, pp.59-963, 2008.

O. Grassel, L. Kruger, G. Frommeyer, and L. W. Meyer, High strength Fe???Mn???(Al, Si) TRIP/TWIP steels development ??? properties ??? application, International Journal of Plasticity, vol.16, issue.10-11, pp.1391-1409, 2000.
DOI : 10.1016/S0749-6419(00)00015-2

B. W. Oh, S. J. Cho, Y. G. Kim, Y. P. Kim, W. S. Kim et al., Effect of aluminium on deformation mode and mechanical properties of austenitic Fe???Mn???Cr???Al???C alloys, Materials Science and Engineering: A, vol.197, issue.2, pp.147-156, 1995.
DOI : 10.1016/0921-5093(94)09751-8

S. Chiou, W. Cheng, and W. Lee, Strain rate effects on the mechanical properties of a Fe???Mn???Al alloy under dynamic impact deformations, Materials Science and Engineering: A, vol.392, issue.1-2, pp.392-156, 2005.
DOI : 10.1016/j.msea.2004.09.055

D. Hua, L. Tang-zheng-you, . Wei, . Wang-me, and . Song-dan, Microstructures and Mechanical Properties of Fe-Mn-(A1 Si) TRIP/TWIP Steels, Journal of iron steel and research international, pp.13-66, 2006.

B. X. Huang, X. D. Wang, Y. H. Rong, L. Wang, and L. , Jin : Mechanical behavior and martensitic transformation of an Fe?Mn?Si?Al?Nb alloy, Materials Science and Engineering, vol.A, pp.438-440, 2006.

A. S. Hamada, L. P. Karjalainen, and M. C. Somani, The influence of aluminum on hot deformation behaviour and tensile properties of high-Mn TWIP steels, Materials Science and Engineering, pp.467-114, 2007.

P. Linot, S. Becker, and E. Felder, Tribomètre annulaire rotatif: présentation et procédure d'emploi. CEMEF. Février, 2006.