E. Aifantis, The physics of plastic deformation, International Journal of Plasticity, vol.3, issue.3, pp.211-248, 1987.
DOI : 10.1016/0749-6419(87)90021-0

E. Aifantis, Gradient Deformation Models at Nano, Micro, and Macro Scales, Journal of Engineering Materials and Technology, vol.121, issue.2, pp.189-202, 1999.
DOI : 10.1115/1.2812366

L. Anand and M. Kothari, A computational procedure for rate-independent crystal plasticity, Journal of the Mechanics and Physics of Solids, vol.44, issue.4, pp.525-558, 1996.
DOI : 10.1016/0022-5096(96)00001-4

B. Antolovich, ASM Hand book Fatigue and Fracture, chapter Fatigue and fracture of nickel-base superalloys, pp.854-868, 1996.

N. K. Arakere and G. A. Swanson, Fretting Stresses in Single Crystal Superalloy Turbine Blade Attachments, Journal of Tribology, vol.123, issue.2, pp.413-423, 2001.
DOI : 10.1115/1.1308032

R. Asaro, Crystal Plasticity, Journal of Applied Mechanics, vol.50, issue.4b, pp.921-934, 1983.
DOI : 10.1115/1.3167205

O. Aslan and S. Forest, Crack growth modelling in single crystals based on higher order continua, Computational Materials Science, vol.45, issue.3, pp.756-761, 2009.
DOI : 10.1016/j.commatsci.2008.09.016
URL : https://hal.archives-ouvertes.fr/hal-00379176

O. Aslan and S. Forest, Numerical Modeling of Fatigue Crack Growth in Single Crystals Based on Microdamage Theory, International Journal of Damage Mechanics, vol.44, issue.189, 2010.
DOI : 10.1016/S0045-7825(99)00218-2
URL : https://hal.archives-ouvertes.fr/hal-00619634

P. Aswath, Effect of orientation on crystallographic cracking in notched nickel-base superalloy single crystal subjected to far-field cyclic compression, Metallurgical and Materials Transactions A, vol.22, issue.2, pp.287-297, 1994.
DOI : 10.1007/BF02647974

U. Aviation, Airplane Flying Handbook, volume FAA-8083-3A. U.S. Government Printing Office, 2004.

R. Bargellini, J. Besson, E. Lorentz, and S. Michel-ponnelle, A non-local finite element based on volumetric strain gradient: Application to ductile fracture, Computational Materials Science, vol.45, issue.3, pp.762-767, 2009.
DOI : 10.1016/j.commatsci.2008.09.020
URL : https://hal.archives-ouvertes.fr/hal-00379224

J. Bassani, Plastic Flow of Crystals, of Advances in Applied Mechanics, pp.191-258, 1993.
DOI : 10.1016/S0065-2156(08)70175-3

A. Bertram, Elasticity and Plasticity of Large Deformations, 2005.
DOI : 10.1007/978-3-642-24615-9

J. Besson, Local approach to fracture, 2004.
URL : https://hal.archives-ouvertes.fr/hal-00755207

J. Besson, R. Leriche, R. Foerch, C. , and G. , Object?oriented programming applied to the finite element method. part ii. application to material behaviours, pp.567-588, 1998.

D. Bettge and W. Osterle, ???Cube slip??? in near-[111] oriented specimens of a single-crystal nickel-base superalloy, Scripta Materialia, vol.40, issue.4, pp.389-395, 1999.
DOI : 10.1016/S1359-6462(98)00446-1

A. Billardon, R. Benallal, and G. Geymonat, Some mathematical aspects of the damage softening rate problem, Cracking and Damage, Strain localization and size effect, pp.247-258, 1988.

R. I. Borja and J. R. Wren, Discrete micromechanics of elastoplastic crystals, International Journal for Numerical Methods in Engineering, vol.26, issue.22, pp.3815-3840, 1993.
DOI : 10.1002/nme.1620362205

J. Bouvard, J. Chaboche, F. Feyel, and F. Gallerneau, A cohesive zone model for fatigue and creep???fatigue crack growth in single crystal superalloys, International Journal of Fatigue, vol.31, issue.5, pp.868-879, 2009.
DOI : 10.1016/j.ijfatigue.2008.11.002

C. R. Brooks, Heat Treatment, Structure and Properties of Non-ferrous Alloys, 1984.

G. Bruno, Lattice misfit in CMSX4-like nickel-base superalloys and its temperature dependence, Zeitschrift f??r Metallkunde, vol.94, issue.1, pp.12-18, 2003.
DOI : 10.3139/146.030012

E. Busso, F. Meissonnier, O. Dowd, and N. , Gradient-dependent deformation of two-phase single crystals, Journal of the Mechanics and Physics of Solids, vol.48, issue.11, pp.2333-2361, 2000.
DOI : 10.1016/S0022-5096(00)00006-5

G. Cailletaud and J. Chaboche, Integration methods for complex plastic constitutive equations, Computer Methods in Applied Mechanics and Engineering, vol.133, pp.125-155, 1996.

G. Cailletaud, J. Chaboche, S. Forest, R. , and L. , On the design of single crystal turbine blades, Revue de M??tallurgie, vol.100, issue.2, pp.165-172, 2003.
DOI : 10.1051/metal:2003137

G. Cailletaud and J. L. Chaboche, Life time predictions in 304 stainless steel by damage approach, Proceedings of Pressure Vessel and Piping Conference, 1982.

J. Chaboche and P. Lesne, A NON-LINEAR CONTINUOUS FATIGUE DAMAGE MODEL, Fatigue & Fracture of Engineering Materials and Structures, vol.105, issue.1, pp.1-17, 1988.
DOI : 10.1007/BF02321056

H. Chandler, Heat Treater's Guide: Practices and Procedure for Nonferrous Alloys, 1996.

E. Charkaluk and A. Constantinescu, An energetic approach in thermomechanical fatigue for silicon molybdenum cast iron, Materials at High Temperatures, vol.1, issue.1, pp.373-380, 2000.
DOI : 10.1016/S0142-1123(98)00027-9
URL : https://hal.archives-ouvertes.fr/hal-00141689

R. Chieragatti and L. Remy, Influence of orientation on the low cycle fatigue of mar-m 200 single crystals at 650?A°c650? 650?A°c. i. fatigue life behaviour, Materials Science and Engineering, issue.1, pp.1411-1420, 1991.

E. Cosserat and F. Cosserat, Théorie des corps déformables, 1909.

J. Crompton and J. Martin, Crack tip plasticity and crack growth in a single-crystal superalloy at elevated temperatures, Materials Science and Engineering, vol.64, issue.1, pp.37-43, 1984.
DOI : 10.1016/0025-5416(84)90071-5

W. Crone, T. Shield, A. Creuziger, and B. Henneman, Orientation dependence of the plastic slip near notches in ductile FCC single crystals, Journal of the Mechanics and Physics of Solids, vol.52, issue.1, pp.85-112, 2004.
DOI : 10.1016/S0022-5096(03)00077-2

A. Cuitiño and M. Ortiz, Computational modelling of single crystals, Modelling and Simulation in Materials Science and Engineering, vol.1, issue.3, pp.225-263, 1993.
DOI : 10.1088/0965-0393/1/3/001

K. Dang-van, Sur la résistancé a la fatigue des métaux. Science and Techniques de l'Armement, pp.647-722, 1973.

K. Dang-van and I. Papadopoulos, High Cycle Metal Fatigue, 1999.
URL : https://hal.archives-ouvertes.fr/hal-00112732

R. De-borst, A generalisation of theory for polar continua, Computer Methods in Applied Mechanics and Engineering, vol.103, issue.3, pp.347-362, 1993.
DOI : 10.1016/0045-7825(93)90127-J

R. F. Decker, Strengthening mechanisms in Ni-based Superalloys. Source book on materials for elevated temperature applications, 1979.

R. F. Decker and C. T. Sims, The Metallurgy of Ni Base Alloys. The Superalloys, 1972.

D. Deluca and C. Annis, Fatigue in single crystal nickel superalloys, Office of Naval Research, 1995.

G. Dieter, Mechanical Metallurgy, 1986.
DOI : 10.5962/bhl.title.35895

T. Dillard, S. Forest, and P. Ienny, Micromorphic continuum modelling of the deformation and fracture behaviour of nickel foams, European Journal of Mechanics - A/Solids, vol.25, issue.3, pp.526-549, 2006.
DOI : 10.1016/j.euromechsol.2005.11.006
URL : https://hal.archives-ouvertes.fr/hal-00133516

M. Donachie, Introduction to Superalloys, Superalloy Source Book, 1984.

D. Duhl, Single Crystal Superalloys, pp.149-182, 1989.
DOI : 10.1016/B978-0-12-690845-9.50011-7

D. J. Duquette and M. Gell, The effects of environment on the elevated temperature fatigue behavior of nickel-base superalloy single crystals, Metallurgical Transactions, vol.62, issue.7, pp.1899-1905, 1972.
DOI : 10.1007/BF02642576

M. Durand-charre, The Microstructure of Superalloys, 1997.

M. Ekh, R. Lillbacka, and K. And-runesson, A model framework for anisotropic damage coupled to crystal (visco)plasticity, International Journal of Plasticity, vol.20, issue.12, pp.2143-2159, 2004.
DOI : 10.1016/j.ijplas.2004.04.007

W. Elber, Fatigue crack closure under cyclic tension, Engineering Fracture Mechanics, vol.2, pp.37-45, 1970.

R. Engelen, M. Geers, and F. Baaijens, Nonlocal implicit gradient-enhanced elasto-plasticity for the modelling of softening behaviour, International Journal of Plasticity, vol.19, issue.4, pp.403-433, 2003.
DOI : 10.1016/S0749-6419(01)00042-0

G. L. Erickson, Superalloy development for aero and industrial gas turbines, Proceedings of ASM 1993 Materials Congress. Materials week 93, 1993.

A. Eringen, Polar and non local fields theories, in Continuum Physics, volume IV, 1976.

A. Eringen, Microcontinuum field theories, 1999.
DOI : 10.1007/978-1-4612-0555-5

A. Eringen and E. Suhubi, Nonlinear theory of simple micro-elastic solids???I, International Journal of Engineering Science, vol.2, issue.2, pp.189-203, 1964.
DOI : 10.1016/0020-7225(64)90004-7

M. Fährmann, Influence of coherency stress on microstructural evolution in model Ni-Al-Mo alloys, Acta Metallurgica et Materialia, vol.43, issue.3, pp.1007-1022, 1995.
DOI : 10.1016/0956-7151(94)00337-H

A. Fatemi and L. Yang, Cumulative fatigue damage and life prediction theories: a survey of the state of the art for homogeneous materials, International Journal of Fatigue, vol.20, issue.1, pp.9-34, 1998.
DOI : 10.1016/S0142-1123(97)00081-9

B. Fedelich, A microstructural model for the monotonic and the cyclic mechanical behavior of single crystals of superalloys at high temperatures, International Journal of Plasticity, vol.18, issue.1, pp.1-49, 2002.
DOI : 10.1016/S0749-6419(00)00045-0

E. Fleury and L. Remy, Behavior of nickel-base superalloy single crystals under thermal-mechanical fatigue, Metallurgical and Materials Transactions A, vol.167, issue.1, pp.99-109, 1994.
DOI : 10.1007/BF02646679

S. Flouriot, Determination experimentale et simulation numerique des phenomenes de localisation de la deformation en pointe de fissure dans un monocristal c.f.c, 2004.

S. Flouriot, S. Forest, G. Cailletaud, A. Köster, L. Rémy et al., Strain localization at the crack tip in single crystal CT specimens under monotonous loading: 3D Finite Element analyses and application to nickel-base superalloys, International Journal of Fracture, vol.124, issue.1/2, pp.43-77, 2003.
DOI : 10.1023/B:FRAC.0000009300.70477.ba
URL : https://hal.archives-ouvertes.fr/hal-00165951

S. Forest, Micromorphic Approach for Gradient Elasticity, Viscoplasticity, and Damage, Journal of Engineering Mechanics, vol.135, issue.3, pp.117-131, 2009.
DOI : 10.1061/(ASCE)0733-9399(2009)135:3(117)
URL : https://hal.archives-ouvertes.fr/hal-00368014

S. Forest and R. Sievert, Elastoviscoplastic constitutive frameworks for generalized continua, Acta Mechanica, vol.160, issue.1-2, pp.71-111, 2003.
DOI : 10.1007/s00707-002-0975-0

S. Forest and R. Sievert, Nonlinear microstrain theories, International Journal of Solids and Structures, vol.43, issue.24, pp.7224-7245, 2006.
DOI : 10.1016/j.ijsolstr.2006.05.012
URL : https://hal.archives-ouvertes.fr/hal-00136739

K. Gall, H. Sehitoglu, and Y. Kadioglu, FEM study of fatigue crack closure under double slip, Acta Materialia, vol.44, issue.10, pp.443955-3965, 1996.
DOI : 10.1016/S1359-6454(96)00049-3

F. Gallerneau, Etude et modelisation de l'endommagement d'un superalliage monocristallin revetu pour aube de turbine, 1995.

F. Gallerneau and J. Chaboche, Fatigue Life Prediction of Single Crystals for Turbine Blade Applications, International Journal of Damage Mechanics, vol.8, issue.4, pp.405-427, 1999.
DOI : 10.1177/105678959900800407

N. Germain, J. Besson, and F. Feyel, Simulation of laminate composites degradation using mesoscopic non-local damage model and non-local layered shell element, Modelling and Simulation in Materials Science and Engineering, vol.15, issue.4, pp.425-434, 2007.
DOI : 10.1088/0965-0393/15/4/S08
URL : https://hal.archives-ouvertes.fr/hal-00170644

M. Geuffrard, Amèlioration des modéles d'endommagement de superalliagesà superalliagesà base nickel, 2010.

P. Gumbsch and R. Pippan, Multiscale Modelling of Plasticity and Fracture by means of Dislocation Mechanics. CISM Lecture Notes, 2005.

A. L. Gurson, Continuum Theory of Ductile Rupture by Void Nucleation and Growth: Part I???Yield Criteria and Flow Rules for Porous Ductile Media, Journal of Engineering Materials and Technology, vol.99, issue.1, pp.2-15, 1977.
DOI : 10.1115/1.3443401

F. Hanriot, G. Cailletaud, R. , and L. , High temperature constitutive modeling -Theory and application, chapter Mechanical behaviour of a nickelbased superalloy single crystal, pp.139-150, 1991.

K. Harris, Development of two rhenium- containing superalloys for single- crystal blade and directionally solidified vane applications in advanced turbine engines, Journal of Materials Engineering and Performance, vol.23, issue.4, pp.481-488, 1993.
DOI : 10.1007/BF02661730

K. Havner, Finite plastic deformation of crystalline solids, 1992.
DOI : 10.1017/CBO9780511526435

D. Hayhurst, Creep rupture under multi-axial states of stress, Journal of the Mechanics and Physics of Solids, vol.20, issue.6, pp.381-382, 1972.
DOI : 10.1016/0022-5096(72)90015-4

P. Henderson, L. Berglin, and C. Jansson, On rafting in a single crystal nickel-base superalloy after high and low temperature creep, Scripta Materialia, vol.40, issue.2, pp.229-234, 1998.
DOI : 10.1016/S1359-6462(98)00348-0

H. Hertzberg, Deformation and Fracture Mechanics of Engineering Materials, Journal of Engineering Materials and Technology, vol.99, issue.1, 1989.
DOI : 10.1115/1.3443416

R. Hill, Generalized constitutive relations for incremental deformation of metal crystals by multislip, Journal of the Mechanics and Physics of Solids, vol.14, issue.2, pp.95-102, 1966.
DOI : 10.1016/0022-5096(66)90040-8

R. Hill and J. Rice, Constitutive analysis of elastic-plastic crystals at arbitrary strain, Journal of the Mechanics and Physics of Solids, vol.20, issue.6, pp.401-413, 1972.
DOI : 10.1016/0022-5096(72)90017-8

C. Hirschberger, E. Kuhl, and P. Steinmann, On deformational and configurational mechanics of micromorphic hyperelasticity ??? Theory and computation, Computer Methods in Applied Mechanics and Engineering, vol.196, issue.41-44, pp.4027-4044, 2007.
DOI : 10.1016/j.cma.2007.02.015

R. Honeycombe, The Plastic Deformation of Metals, 1984.

B. Jaoul, Etude de la plasticité et application aux métaux, 1965.

L. Kachanov, Time of rupture process under creep conditions, 1958.

K. Kakehi, Effect of primary and secondary precipitates on creep strength of Ni-base superalloy single crystals, Materials Science and Engineering: A, vol.278, issue.1-2, pp.135-141, 2000.
DOI : 10.1016/S0921-5093(99)00579-1

M. Kaminski, Modélisation de l'endommagement en fatigue des superalliages monocristallins pour aubes de turbines en zone de concentration de contrainte, 2007.

B. H. Kear and B. J. Piearcey, Tensile and creep properties of single crystals of the nickel base superalloy MAR-M200, Trans. AIME, vol.239, 1967.

A. Khan, Continuum theory of plasticity, 1995.

J. E. King, Fatigue crack propagation in nickel-base superalloys ??? effects of microstructure, load ratio, and temperature, Materials Science and Technology, vol.102, issue.9, pp.750-764, 1987.
DOI : 10.1007/BF02663305

Y. Kiyak, B. Fedelich, and A. Pfennig, Simulation of crack growth under low cycle fatigue at high temperature in a single crystal superalloy, Engineering Fracture Mechanics, vol.75, issue.8, pp.2418-2443, 2008.
DOI : 10.1016/j.engfracmech.2007.08.002

A. Koster, A. M. Alam, R. , and L. , A physical-base model for life prediction of single crystal turbine blades under creep-fatigue loading and thermal transient conditions, Temperature-Fatigue Interaction, pp.203-212, 2002.
DOI : 10.1016/S1566-1369(02)80077-2

A. Koster and L. Rémy, Am oxidation creep-fatigue damage model for fatigue at high temperature and under thermal transients, Fatigue'99, pp.2139-2144, 2000.

D. Kujawski and F. A. Ellying, A cumulative damage theory for fatigue crack initiation and propagation, International Journal of Fatigue, vol.6, issue.2, pp.83-88, 1984.
DOI : 10.1016/0142-1123(84)90017-3

H. H. Leiholz, On the modified S-N curve for metal fatigue prediction and its experimental verification, Engineering Fracture Mechanics, vol.23, issue.3, pp.495-505, 1986.
DOI : 10.1016/0013-7944(86)90158-X

J. Lemaitre, A Course on Damage Mechanics, 1992.

J. Lemaitre and J. Chaboche, Mechanics of Solid Materials, 1994.

J. Lemaitre and R. Desmorat, Engineeering damage mechanics: Ductile, Creep, Fatigue and Brittle Failures, 2004.

J. Lemaitre and A. Plumtree, Application of Damage Concepts to Predict Creep-Fatigue Failures, Journal of Engineering Materials and Technology, vol.101, issue.3, pp.284-292, 1979.
DOI : 10.1115/1.3443689

P. Lesne and S. Savalle, A differential damage rule with microinitiation and micropropagation, La Recherche Aérospatiale, issue.2, pp.33-47, 1987.

G. Leverant, K. Chan, and J. Hack, Fatigue crack growth in mar-m-200 single crystals, Metallurgical Transactions, vol.18, pp.581-591, 1987.

G. Leverant and M. Gell, The influence of temperature and cyclic frequency on the fatigue fracture of cube oriented nickel-base superalloy single crystals, Metallurgical Transactions A, vol.1, issue.2, pp.367-371, 1975.
DOI : 10.1007/BF02667291

G. Leverant and B. Kear, The mechanism of creep in gamma prime precipitation-hardened nickel-base alloys at intermediate temperatures, Metallurgical and Materials Transactions B, vol.239, issue.2, pp.491-498, 1970.
DOI : 10.1007/BF02811560

M. Li, Study on long-term oxidation and hot corrosion behaviour of gas turbine superalloys, 1997.

S. Li and D. Smith, Development of an anisotropic constitutive model for single-crystal superalloy for combined fatigue and creep loading, International Journal of Mechanical Sciences, vol.40, issue.10, pp.937-948, 1998.
DOI : 10.1016/S0020-7403(97)00136-7

H. Liu, Q. Chen, L. , and D. , Shear fatigue crack growth and its analysis, Materials Science, vol.34, issue.5/6, pp.300-307, 1993.
DOI : 10.1007/BF00558973

P. Lucas, L. Kunz, and M. Svoboda, High-temperature ultra-high cycle fatigue damage of notched single crystal superalloys at high mean stresses, International Journal of Fatigue, vol.27, issue.10-12, pp.1535-1540, 2005.
DOI : 10.1016/j.ijfatigue.2005.06.006

R. Mahnken, Theoretical, numerical and identification aspects of a new model class for ductile damage, International Journal of Plasticity, vol.18, issue.7, pp.801-831, 2002.
DOI : 10.1016/S0749-6419(00)00105-4

G. Maier, A matrix structural theory of piecewise linear elastoplasticity with interacting yield planes, Meccanica, vol.XI, issue.1, pp.54-66, 1970.
DOI : 10.1007/BF02133524

J. Mandel, Plasticité classique et viscoplasticité. CISM Courses and Lectures No, 1972.

S. Manson and G. Halford, Re-examination of cumulative fatigue damage analysis???an engineering perspective, Engineering Fracture Mechanics, vol.25, issue.5-6, pp.539-571, 1986.
DOI : 10.1016/0013-7944(86)90022-6

S. Manson and M. Hirschberg, Fatigue : An Interdisciplinary Approach, 1964.

N. Marchal, Propagation de fissure en fatigue-fluagè a haute température de superalliages monocristallinsàmonocristallinsà base de nickel, 2006.

N. Marchal, S. Flouriot, S. Forest, R. , and L. , Crack-tip stress???strain fields in single crystal nickel-base superalloys at high temperature under cyclic loading, Computational Materials Science, vol.37, issue.1-2, pp.42-50, 2006.
DOI : 10.1016/j.commatsci.2005.12.014
URL : https://hal.archives-ouvertes.fr/hal-00139144

N. Marchal, S. Forest, L. Rémy, and S. Duvinage, Simulation of fatigue crack growth in single crystal superalloys using local approach to fracture, Local approach to fracture, 9th European Mechanics of Materials Conference, Euromech?Mecamat, pp.353-358, 2006.
URL : https://hal.archives-ouvertes.fr/hal-00150004

T. B. Massalski, Binary alloy phase diagrams, 1990.

G. Maugin, Die Methode der virtuallen Leistung in der Kontinuumsmechanik: Anwendung auf gekoppelte Felder, Acta Mechanica, vol.15, issue.No. 2, pp.1-70, 1980.
DOI : 10.1007/BF01190057

G. Maugin, The thermomechanics of plasticity and fracture, 1992.
DOI : 10.1017/CBO9781139172400

L. Méric, P. Poubanne, C. , and G. , Single Crystal Modeling for Structural Calculations: Part 1???Model Presentation, Journal of Engineering Materials and Technology, vol.113, issue.1, pp.162-170, 1991.
DOI : 10.1115/1.2903374

C. Miehe, Multisurface thermoplasticity for single crystals at large strains in terms of eulerian vector updates, International Journal of Solids and Structures, vol.33, issue.20-22, pp.3103-3130, 1996.
DOI : 10.1016/0020-7683(95)00274-X

R. Mindlin, Micro?structure in linear elasticity Archive for Rational Mechanics and Analysis, pp.51-78, 1964.

R. Mindlin and N. Eshel, On first strain-gradient theories in linear elasticity, International Journal of Solids and Structures, vol.4, issue.1, pp.109-124, 1968.
DOI : 10.1016/0020-7683(68)90036-X

H. Mughrabi and M. Ott, Dependence of the high temperature low cycle fatigue behaviour of the monocrystalline nickel-base superalloys cmsx-4 and cmsx-6 on the ? ? ? morphology, Materials Science and Engineering, vol.272, pp.24-30, 1999.

H. Mühlhaus and E. Aifantis, A variational principle for gradient plasticity, International Journal of Solids and Structures, vol.28, issue.7, pp.845-857, 1991.
DOI : 10.1016/0020-7683(91)90004-Y

S. Murakami, K. Hayakawa, and Y. Liu, Damage Evolution and Damage Surface of Elastic-Plastic-Damage Materials under Multiaxial Loading, International Journal of Damage Mechanics, vol.7, issue.2, pp.103-128, 1998.
DOI : 10.1177/105678959800700202

M. Nathal, R. Mackay, and R. Garlick, Temperature dependence of ??-??' lattice mismatch in Nickel-base superalloys, Materials Science and Engineering, vol.75, issue.1-2, pp.195-205, 1985.
DOI : 10.1016/0025-5416(85)90189-2

A. Needleman, R. Asaro, R. Lemonds, P. , and D. , Finite element analysis of crystalline solids, Computer Methods in Applied Mechanics and Engineering, vol.52, issue.1-3, pp.689-708, 1985.
DOI : 10.1016/0045-7825(85)90014-3

D. Nouailhas and G. Cailletaud, Tension-torsion behavior of single-crystal superalloys: Experiment and finite element analysis, International Journal of Plasticity, vol.11, issue.4, pp.451-470, 1995.
DOI : 10.1016/S0749-6419(98)80004-1

D. Nouailhas and J. P. Culié, Development and application of a model for single crystal superalloys, International Conference on High Temperature Constitutive Modeling, 1991.

M. Paas, Continuum damage mechanics with an application to fatigue, 1990.

R. Peerlings, M. Geers, R. De-borst, and W. Brekelmans, A critical comparison of nonlocal and gradient-enhanced softening continua, International Journal of Solids and Structures, vol.38, issue.44-45, pp.7723-7746, 2001.
DOI : 10.1016/S0020-7683(01)00087-7

R. Peerlings, T. Massart, and M. Geers, A thermodynamically motivated implicit gradient damage framework and its application to brick masonry cracking, Computer Methods in Applied Mechanics and Engineering, vol.193, issue.30-32, pp.3403-3417, 2004.
DOI : 10.1016/j.cma.2003.10.021

T. M. Pollock, Dislocation in Solids, Elsevier Science B. V, 2002.

S. Pommier, A study of the relationship between variable level fatigue crack growth and the cyclic constitutive behaviour of steel, International Journal of Fatigue, vol.23, pp.111-118, 2001.
DOI : 10.1016/S0142-1123(01)00165-7

S. Pommier, Plane strain crack closure and cyclic hardening, Engineering Fracture Mechanics, vol.69, issue.1, pp.25-44, 2002.
DOI : 10.1016/S0013-7944(01)00061-3

W. Qi and A. Bertram, Anisotropic continuum damage modeling for single crystals at high temperatures, International Journal of Plasticity, vol.15, issue.11, pp.1197-1215, 1999.
DOI : 10.1016/S0749-6419(99)00035-2

Y. N. Rabotnov, Creep Problems in Structural Members, Journal of Applied Mechanics, vol.37, issue.1, 1969.
DOI : 10.1115/1.3408479

M. M. Rashid and S. Nemat-nasser, A constitutive algorithm for rate-dependent crystal plasticity, Computer Methods in Applied Mechanics and Engineering, vol.94, issue.2, pp.201-228, 1992.
DOI : 10.1016/0045-7825(92)90147-C

M. Reger and L. Remy, Fatigue oxidation interaction in in 100 superalloy, Metallurgical Transactions A, vol.22, issue.9, pp.2259-2268, 1988.
DOI : 10.1007/BF02645049

W. Ren and T. Nicholas, Notch size effects on high cycle fatigue limit stress of Udimet 720, Materials Science and Engineering: A, vol.357, issue.1-2, pp.141-152, 2003.
DOI : 10.1016/S0921-5093(03)00218-1

J. Rice, Inelastic constitutive relations for solids: An internal-variable theory and its application to metal plasticity, Journal of the Mechanics and Physics of Solids, vol.19, issue.6, pp.433-455, 1971.
DOI : 10.1016/0022-5096(71)90010-X

J. Rice, Tensile crack tip fields in elastic-ideally plastic crystals, Mechanics of Materials, vol.6, issue.4, pp.317-335, 1987.
DOI : 10.1016/0167-6636(87)90030-5

H. Sehitoglu and D. Boismier, Thermo-mechanical fatigue pf mar-m247: part1-experiments, Journal of Engineering Materials and Technology, vol.112, issue.1, pp.68-79, 1990.

J. C. Simo and J. W. Ju, On continuum damage-elastoplasticity at finite strains, Computational Mechanics, vol.41, issue.7, pp.375-400, 1989.
DOI : 10.1007/BF01047053

C. T. Sims, N. S. Stoloff, C. , and H. W. , Superalloys II, 1987.

W. F. Smith, Structure and Properties of Engineering Alloys, 1981.

K. Solanki, S. Daniewicz, and J. Newman, Finite element analysis of plasticity-induced fatigue crack closure: an overview, Engineering Fracture Mechanics, vol.71, issue.2, pp.149-171, 2004.
DOI : 10.1016/S0013-7944(03)00099-7

P. Steinmann and E. Stein, On the numerical treatment and analysis of finite deformation ductile single crystal plasticity, Computer Methods in Applied Mechanics and Engineering, vol.129, issue.3, pp.235-254, 1996.
DOI : 10.1016/0045-7825(95)00913-2

D. Stouffer and L. Dame, Inelastic Deformation of Metals: Models, Mechanical Properties and Metallurgy, 1996.

S. Suresh, Fatigue of Materials, 1998.
DOI : 10.1017/CBO9780511806575

S. Suresh and R. Ritchie, Propagation of short fatigue cracks, International Metals Review, vol.29, pp.445-476, 1984.

G. A. Swanson, I. Linask, and D. M. Nisley, Life prediction and constitutive models for engine hot section anisotropic materials program, Annual Status Report, pp.3-2393, 1986.

G. Taylor, The Mechanism of Plastic Deformation of Crystals. Part I. Theoretical, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.145, issue.855, pp.362-387, 1934.
DOI : 10.1098/rspa.1934.0106

C. Teodosiu, A dynamic theory of dislocations and its applications to the theory of the elastic-plastic continuum, Fundamental Aspects of Dislocation Theory, pp.837-876, 1970.

C. Teodosiu, Large plastic deformation of crystalline aggregates. CISM Courses and Lectures No, 1997.

J. K. Tien and S. M. Copley, The effect of orientation and sense of applied uniaxial stress on the morphology of coherent gamma prime precipitates in stress annealed nickel-base superalloy crystals, Metallurgical Transactions, vol.145, issue.2, pp.2543-553, 1971.
DOI : 10.1007/BF02663347

T. Tinga, Multiscale modelling of Single Crystal Superalloys for Gas Turbine Blades, 2009.

V. Tvergaard and A. Needleman, Analysis of the cup-cone fracture in a round tensile bar, Acta Metallurgica, vol.32, issue.1, pp.157-169, 1984.
DOI : 10.1016/0001-6160(84)90213-X

G. Z. Voyiadjis and B. Deliktas, A coupled anisotropic damage model for the inelastic response of composite materials, Computer Methods in Applied Mechanics and Engineering, vol.183, issue.3-4, pp.159-199, 2000.
DOI : 10.1016/S0045-7825(99)00218-2

P. Wright, Oxidation-Fatigue Interactions in a Single-Crystal Superalloy, pp.558-575, 1988.
DOI : 10.1520/STP24506S

H. Zhou, Y. Ro, H. Harada, Y. Aoki, and M. Arai, Deformation microstructures after low-cycle fatigue in a fourth-generation Ni-base SC superalloy TMS-138, Materials Science and Engineering: A, vol.381, issue.1-2, pp.20-27, 2004.
DOI : 10.1016/j.msea.2004.04.051