L. A. Utracki, Polymer Alloys and Blends, 1989.

U. Sundararaj and C. W. Macosko, Drop Breakup and Coalescence in Polymer Blends: The Effects of Concentration and Compatibilization, Macromolecules, vol.28, issue.8, p.2647, 1995.
DOI : 10.1021/ma00112a009

H. K. Jeon, J. Zhang, and C. W. Macosko, Premade vs. reactively formed compatibilizers for PMMA/PS melt blends, Polymer, vol.46, issue.26, p.12422, 2005.
DOI : 10.1016/j.polymer.2005.10.125

T. S. Omonov, C. Harrats, G. Groeninckx, and P. Moldenaers, Anisotropy and instability of the co-continuous phase morphology in uncompatibilized and reactively compatibilized polypropylene/polystyrene blends, Polymer, vol.48, issue.18, p.5289, 2007.
DOI : 10.1016/j.polymer.2007.06.043

J. A. Galloway, H. K. Jeon, J. R. Bell, and C. W. Macosko, Block copolymer compatibilization of cocontinuous polymer blends, Polymer, vol.46, issue.1, p.183, 2005.
DOI : 10.1016/j.polymer.2004.10.061

R. Fayt and P. Teyssié, Molecular design of multicomponent polymer systems. XVIII: Emulsification of high-impact polystyrene and low density polyethylene blends into high-impact alloys, Polymer Engineering and Science, vol.27, issue.16, p.937, 1990.
DOI : 10.1002/pen.760301602

P. M. Subramanian, Polymer blends?morphology and solvent barriers, Barrier Polymers and Structures, 1990.

C. A. Orr, A. Adedeji, A. Hirao, F. S. Bates, and C. W. Macosko, Flow-Induced Reactive Self-Assembly, Macromolecules, vol.30, issue.4, p.1243, 1997.
DOI : 10.1021/ma961574k

Z. Yin, C. Koulic, C. Pagnoulle, and R. Jérôme, Reactive Blending of Functional PS and PMMA:?? Interfacial Behavior of in situ Formed Graft Copolymers, Macromolecules, vol.34, issue.15, p.5132, 2001.
DOI : 10.1021/ma001798+

H. Pernot, M. Baumert, F. Court, and L. Leibler, Design and properties of co-continuous nanostructured polymers by reactive blending, Nature Materials, vol.1, issue.1, p.54, 2002.
DOI : 10.1038/nmat711

M. Freluche, I. Iliopoulos, J. J. Flat, A. V. Ruzette, and L. Leibler, Self-organized materials and graft copolymers of polymethylmethacrylate and polyamide-6 obtained by reactive blending, Polymer, vol.46, issue.17, p.6554, 2005.
DOI : 10.1016/j.polymer.2005.05.009
URL : https://hal.archives-ouvertes.fr/hal-00021730

A. Steurer and G. P. Hellmann, Reactive blending: inhomogeneous interface grafting in melts of maleinated polystyrene and polyamides, Polymers for Advanced Technologies, vol.9, issue.5, p.297, 1998.
DOI : 10.1002/(SICI)1099-1581(199805)9:5<297::AID-PAT784>3.0.CO;2-7

A. Peterlin, Molecular model of drawing polyethylene and polypropylene, Journal of Materials Science, vol.5, issue.197, p.490, 1971.
DOI : 10.1007/BF00550305

L. Lin and A. S. Argon, Structure and plastic deformation of polyethylene, Journal of Materials Science, vol.43, issue.7, p.294, 1994.
DOI : 10.1007/BF01162485

R. Seguela, Critical review of the molecular topology of semicrystalline polymers: The origin and assessment of intercrystalline tie molecules and chain entanglements, Journal of Polymer Science Part B: Polymer Physics, vol.35, issue.14, p.1729, 2005.
DOI : 10.1002/polb.20414
URL : https://hal.archives-ouvertes.fr/hal-00436791

Z. Yin, C. Koulic, C. Pagnoulle, and R. Jérôme, Probing of the Reaction Progress at a PMMA/PS Interface by Using Anthracene-Labeled Reactive PS Chains, Langmuir, vol.19, issue.2, p.453, 2003.
DOI : 10.1021/la020614c

Z. Yin, C. Koulic, H. K. Jeon, C. Pagnoulle, C. W. Macosko et al., Effect of Molecular Weight of the Reactive Precursors in Melt Reactive Blending, Macromolecules, vol.35, issue.24, p.8917, 2002.
DOI : 10.1021/ma0206366

C. A. Orr, J. J. Cernohous, P. Guegan, A. Hirao, H. K. Jeon et al., Homogeneous reactive coupling of terminally functional polymers, Polymer, vol.42, issue.19, p.8171, 2001.
DOI : 10.1016/S0032-3861(01)00329-9

M. Freluche, I. Iliopoulos, M. Millequant, J. J. Flat, and L. Leibler, Graft Copolymers of Poly(methyl methacrylate) and Polyamide-6:?? Synthesis by Reactive Blending and Characterization, Macromolecules, vol.39, issue.20, p.6905, 2006.
DOI : 10.1021/ma060036x

V. Balsamo and R. Stadler, Influence of the Crystallization Temperature on the Microphase Morphology of a Semicrystalline ABC Triblock Copolymer, Macromolecules, vol.32, issue.12, pp.3994-3999, 1999.
DOI : 10.1021/ma9809942

V. Balsamo, F. Von-gyldenfeldt, and R. Stadler, Thermal behavior and spherulitic superstructures of SBC triblock copolymers based on polystyrene (S), polybutadiene (B) and a crystallizable poly(??-caprolactone) (C) block, Macromolecular Chemistry and Physics, vol.197, issue.10, pp.3317-3341, 1996.
DOI : 10.1002/macp.1996.021971021

J. Brandrup and E. H. Immergut, Polymer Handbook, 1989.

C. W. Bunn, Transactions of the Faraday Society, pp.482-490, 1939.

R. V. Castillo, A. J. Muller, M. C. Lin, H. L. Chen, U. Jeng et al., -PE Diblock Copolymers, Macromolecules, vol.41, issue.16, pp.6154-6164, 2008.
DOI : 10.1021/ma800859y
URL : https://hal.archives-ouvertes.fr/hal-01408449

L. Corte, F. Beaume, and L. Leibler, Crystalline organization and toughening: example of polyamide-12, Polymer, vol.46, issue.8, pp.2748-2757, 2005.
DOI : 10.1016/j.polymer.2005.01.040

T. D. Fornes and D. R. Paul, Crystallization behavior of nylon 6 nanocomposites, Polymer, vol.44, issue.14, pp.3945-3961, 2003.
DOI : 10.1016/S0032-3861(03)00344-6

M. Freluche, I. Iliopoulos, J. J. Flat, A. V. Ruzette, and L. Leibler, Self-organized materials and graft copolymers of polymethylmethacrylate and polyamide-6 obtained by reactive blending, Polymer, vol.46, issue.17, pp.6554-6562, 2005.
DOI : 10.1016/j.polymer.2005.05.009
URL : https://hal.archives-ouvertes.fr/hal-00021730

L. Gani, S. Tence-girault, M. Millequant, S. Bizet, and L. Leibler, Co-continuous Nanostructured Blend by Reactive Blending: Incorporation of High Molecular Weight Polymers, Macromolecular Chemistry and Physics, vol.31, issue.7, pp.736-743, 2010.
DOI : 10.1002/macp.200900552
URL : https://hal.archives-ouvertes.fr/hal-00546123

Y. Gao and H. L. Liu, Crystallization behavior of dry-brush PEO-PS block copolymer and PEO homopolymer blend, Journal of Applied Polymer Science, vol.31, issue.4, pp.2718-2723, 2007.
DOI : 10.1002/app.26812

I. W. Hamley, V. Castelletto, R. V. Castillo, A. J. Muller, C. M. Martin et al., -poly(??-caprolactone) Double Crystalline Diblock Copolymers:?? A Study Using X-ray Scattering, Differential Scanning Calorimetry, and Polarized Optical Microscopy, Macromolecules, vol.38, issue.2, pp.463-472, 2005.
DOI : 10.1021/ma0481499
URL : https://hal.archives-ouvertes.fr/jpa-00248122

T. Hashimoto, H. Tanaka, and H. Hasegawa, Ordered structure in mixtures of a block copolymer and homopolymers. 2. Effects of molecular weights of homopolymers, Macromolecules, vol.23, issue.20, pp.4378-4386, 1990.
DOI : 10.1021/ma00222a009

K. H. Illers, Makromolekulare Chemie-macromolecular Chemistry and Physics, pp.497-507, 1978.

K. Inomata, C. Fukuda, K. Hori, H. Sugimoto, and E. Nakanishi, Side-chain crystallization behavior of graft copolymers consisting of an amorphous main chain and crystalline side chains. II. Poly(n-hexyl methacrylate)-graft-poly(ethylene glycol), Journal of Polymer Science Part B: Polymer Physics, vol.26, issue.2, pp.129-137, 2007.
DOI : 10.1002/polb.21041

K. Inomata, E. Nakanishi, Y. Sakane, M. Koike, and T. Nose, Side-chain crystallization behavior of graft copolymers consisting of amorphous main chain and crystalline side chains: Poly(methyl methacrylate)-graft-poly(ethylene glycol) and poly(methyl acrylate)-graft-poly(ethylene glycol), Journal of Polymer Science Part B: Polymer Physics, vol.6, issue.1, pp.79-86, 2005.
DOI : 10.1002/polb.20311

Y. P. Khanna, Overview of transition phenomenon in nylon 6, Macromolecules, vol.25, issue.12, pp.3298-3300, 1992.
DOI : 10.1021/ma00038a043

M. I. Kohan, Nylon Plastics Handbook, 1995.

L. Leibler, Die Makromolekulare Chemie, Die Makromolekulare Chemie, Rapid Communications, vol.2, issue.67, pp.393-400, 1981.
DOI : 10.1002/marc.1981.030020606

Y. L. Loo and R. A. Register, Developments in Block Copolymer Science and Technology, pp.213-243, 2004.

Y. L. Loo, R. A. Register, and A. J. Ryan, Polymer Crystallization in 25-nm Spheres, Physical Review Letters, vol.84, issue.18, pp.4120-4123, 2000.
DOI : 10.1103/PhysRevLett.84.4120

Y. L. Loo, R. A. Register, and A. J. Ryan, Modes of Crystallization in Block Copolymer Microdomains:?? Breakout, Templated, and Confined, Macromolecules, vol.35, issue.6, pp.2365-2374, 2002.
DOI : 10.1021/ma011824j

C. Y. Luo, X. Han, Y. Gao, H. L. Liu, and Y. Hu, -PS/h-PEO, Journal of Applied Polymer Science, vol.31, issue.2, pp.907-915, 2009.
DOI : 10.1002/app.30004
URL : https://hal.archives-ouvertes.fr/hal-00908981

J. Martinez-salazar and C. G. Cannom, Transmission electron microscopy of polyamides, Journal of Materials Science Letters, vol.16, issue.8, pp.693-694, 1984.
DOI : 10.1007/BF00719925

A. J. Muller, M. Arnal, and V. Balsamo, Crystallization in Block Copolymers with More than One Crystallizable Block, Lecture Notes in Physics, vol.714, pp.229-259, 2007.
DOI : 10.1007/3-540-47307-6_13

S. Nojima, Y. Akutsu, A. Washino, and S. Tanimoto, Morphology of melt-quenched poly(??-caprolactone)-block-polyethylene copolymers, Polymer, vol.45, issue.21, pp.7317-7324, 2004.
DOI : 10.1016/j.polymer.2004.08.044

S. Nojima, M. Ono, and T. Ashida, Crystallization of Block Copolymers II. Morphological Study of Poly (ethylene glycol)-Poly (.EPSILON.-caprolactone) Block Copolymers., Polymer Journal, vol.8, issue.11, pp.1271-1280, 1992.
DOI : 10.1016/0032-3861(91)90401-4

H. Pernot, M. Baumert, F. Court, and L. Leibler, Design and properties of co-continuous nanostructured polymers by reactive blending, Nature Materials, vol.1, issue.1, pp.54-58, 2002.
DOI : 10.1038/nmat711

P. Rangarajan, C. F. Haisch, R. A. Register, D. H. Adamson, and L. J. Fetters, Influence of Semicrystalline Homopolymer Addition on the Morphology of Semicrystalline Diblock Copolymers, Macromolecules, vol.30, issue.3, pp.494-502, 1997.
DOI : 10.1021/ma9603084

P. Rangarajan, R. A. Register, and L. J. Fetters, Morphology of semicrystalline block copolymers of ethylene-(ethylene-alt-propylene), Macromolecules, vol.26, issue.17, pp.4640-4645, 1993.
DOI : 10.1021/ma00069a034

A. V. Ruzette and L. Leibler, Block copolymers in tomorrow's plastics, Nature Materials, vol.93, issue.1, pp.19-31, 2005.
DOI : 10.1038/nmat1295

A. J. Ryan, J. P. Fairclough, I. W. Hamley, S. M. Mai, and C. Booth, Chain Folding in Crystallizable Block Copolymers, Macromolecules, vol.30, issue.6, pp.1723-1727, 1997.
DOI : 10.1021/ma960943+

A. J. Ryan, I. W. Hamley, W. Bras, and F. S. Bates, Structure Development in Semicrystalline Diblock Copolymers Crystallizing from the Ordered Melt, Macromolecules, vol.28, issue.11, pp.3860-3868, 1995.
DOI : 10.1021/ma00115a016

H. Sano, T. Usami, and H. Nakagawa, Lamellar morphologies of melt-crystallized polyethylene, isotactic polypropylene and ethylene-propylene copolymers by the RuO4 staining technique, Polymer, vol.27, issue.10, pp.1497-1504, 1986.
DOI : 10.1016/0032-3861(86)90094-7

T. Shiomi, K. Imai, K. Takenaka, H. Takeshita, H. Hayashi et al., Appearance of double spherulites like concentric circles for poly(??-caprolactone)-block-poly(ethylene glycol)-block-poly(??-caprolactone), Polymer, vol.42, issue.7, pp.3233-3239, 2001.
DOI : 10.1016/S0032-3861(00)00597-8

H. Tanaka, H. Hasegawa, and T. Hashimoto, Ordered structure in mixtures of a block copolymer and homopolymers. 1. Solubilization of low molecular weight homopolymers, Macromolecules, vol.24, issue.1, pp.240-251, 1991.
DOI : 10.1021/ma00001a037

K. I. Winey, E. L. Thomas, and L. J. Fetters, Swelling of lamellar diblock copolymer by homopolymer: influences of homopolymer concentration and molecular weight, Macromolecules, vol.24, issue.23, pp.6182-6188, 1991.
DOI : 10.1021/ma00023a020

Y. M. Yao, L. Z. Liu, H. Li, T. R. Fang, and E. L. Zhou, Glass transition and crystallization of poly(vinyl alcohol)-g-poly(methyl methacrylate) graft copolymers, Polymer, vol.35, issue.14, pp.3122-3126, 1994.
DOI : 10.1016/0032-3861(94)90430-8

F. Spa+lpa-]-se-déforme, SPA+LPA] : les chaînes de FPE et de PA s'orientent dans les domaines d'une morphologie fibrillaire. Dans l'alliage FPE2+SPA, les domaines de SPA et de FPE2 sont aussi étirés mais l'orientation des chaînes cristallines est plus complexe. Les chaînes de SPA en phase ? sont orientées dans la direction de traction alors que les chaînes de FPE2 et

C. Hu, G. H. Baker, and W. Scott, Reactive Polymer Blending, 2001.
URL : https://hal.archives-ouvertes.fr/hal-01278687

Z. Bartczak, A. S. Argon, and R. E. Cohen, Deformation mechanisms and plastic resistance in single-crystal-textured high-density polyethylene, Macromolecules, vol.25, issue.19, pp.5036-5053, 1992.
DOI : 10.1021/ma00045a034

T. J. Bessell, D. Hull, and J. B. Shortall, The effect of polymerization conditions and crystallinity on the mechanical properties and fracture of spherulitic nylon 6, Journal of Materials Science, vol.17, issue.7, pp.1127-1136, 1975.
DOI : 10.1007/BF00541393

C. W. Bunn, Transactions of the Faraday Society, pp.482-0490, 1939.

L. J. Fetters, D. J. Lohse, D. Richter, T. A. Witten, and A. Zirkbl, Connection between Polymer Molecular Weight, Density, Chain Dimensions, and Melt Viscoelastic Properties, Macromolecules, vol.27, issue.17, pp.4639-4647, 1994.
DOI : 10.1021/ma00095a001

T. D. Fornes and D. R. Paul, Crystallization behavior of nylon 6 nanocomposites, Polymer, vol.44, issue.14, pp.3945-3961, 2003.
DOI : 10.1016/S0032-3861(03)00344-6

A. Galeski, Strength and toughness of crystalline polymer systems, Progress in Polymer Science, vol.28, issue.12, pp.1643-1699, 2003.
DOI : 10.1016/j.progpolymsci.2003.09.003

J. M. Haudin and C. G. Sell, Introduction à la mécanique des polymères, chapter Mécanismes microscopiques de déformation des polymères semi cristallins, pp.251-273

G. Holden, H. R. Kricheldorf, and &. R. Quirk, Thermoplastic elastomers, pp.48-69, 2004.

M. I. Kohan, Nylon Plastics Handbook, 1995.

C. Koning, M. Van-duin, C. Pagnoulle, and R. Jerome, Strategies for compatibilization of polymer blends, Progress in Polymer Science, vol.23, issue.4, pp.707-757, 1998.
DOI : 10.1016/S0079-6700(97)00054-3

C. M. Koo, M. A. Hillmyer, and F. S. Bates, Structure and Properties of Semicrystalline???Rubbery Multiblock Copolymers, Macromolecules, vol.39, issue.2, pp.667-677, 2006.
DOI : 10.1021/ma051098a

L. Lin and A. S. Argon, Structure and plastic deformation of polyethylene, Journal of Materials Science, vol.43, issue.7, pp.294-323, 1994.
DOI : 10.1007/BF01162485

Y. Mohajer, G. L. Wilkes, I. C. Wang, and J. E. Mc-grath, Hydrogenated linear block copolymers of butadiene and isoprene: effects of variation of composition and sequence architecture on properties, Polymer, vol.23, issue.10, pp.1523-1535, 1982.
DOI : 10.1016/0032-3861(82)90256-7

A. Peterlin, Molecular model of drawing polyethylene and polypropylene, Journal of Materials Science, vol.5, issue.197, p.490, 1971.
DOI : 10.1007/BF00550305

S. Sakurai, D. Isobe, S. Okamoto, T. Yao, and S. Nomura, cubic symmetry by uniaxial stretching of a double-gyroid block copolymer, Physical Review E, vol.63, issue.6, p.61803, 2001.
DOI : 10.1103/PhysRevE.63.061803

J. M. Schultz, Polymer materials science, chapter 11: Review: Deformation mechanisms in crystalline polymers, Journal of Polymer Science: Polymer Letters Edition, pp.603-604, 1974.

M. Teubner and R. Strey, Origin of the scattering peak in microemulsions, The Journal of Chemical Physics, vol.87, issue.5, pp.3195-3200, 1987.
DOI : 10.1063/1.453006

P. Asymmetric, PS-co-PB)-block-PS block copolymers: morphology formation and deformation behaviour, New Journal of Physics, vol.6, 2004.

&. K. Calleja and . Knoll, Relationship between nanostructure and deformation behavior of microphase-separated styrene/butadiene systems, Journal Of Applied Polymer Science, vol.101, issue.2, pp.998-1006, 2006.

G. H. Hu, W. Baker, and . Scott, Reactive polymer blending, 2001.
URL : https://hal.archives-ouvertes.fr/hal-01278687

Z. Bartczak, A. S. Argon, and &. R. Cohen, Deformation mechanisms and plastic resistance in single-crystal-textured high-density polyethylene, Macromolecules, vol.25, issue.19, pp.5036-5053, 1992.
DOI : 10.1021/ma00045a034

]. T. Bessell, D. Hull, and &. J. Shortall, The effect of polymerization conditions and crystallinity on the mechanical properties and fracture of spherulitic nylon 6, Journal of Materials Science, vol.17, issue.7, pp.1127-1136, 1975.
DOI : 10.1007/BF00541393

]. N. Brown and &. M. Ward, The influence of morphology and molecular weight on ductile-brittle transitions in linear polyethylene, Journal of Materials Science, vol.17, issue.5, pp.1405-1420, 1983.
DOI : 10.1007/BF01111960

R. J. Cohen, B. J. Albalak, M. S. Dair, &. E. Capel, and . Thomas, Deformation of Oriented Lamellar Block Copolymer Films, Macromolecules, vol.33, issue.17, pp.6502-6516, 2000.
DOI : 10.1021/ma000513q

M. Fetters, &. E. Capel, and . Thomas, Mechanical properties and deformation behavior of the double gyroid phase in unoriented thermoplastic elastomers, Macromolecules, vol.32, issue.24, pp.8145-8152, 1999.

]. B. Dair, A. Avgeropoulos, N. Hadjichristidis, and &. E. Thomas, Mechanical properties of the double gyroid phase in oriented thermoplastic elastomers, Journal of Materials Science, vol.35, issue.20, pp.5207-5213, 2000.
DOI : 10.1023/A:1004816723095

]. W. Davies-71a and . Davies, The elastic constants of a two-phase composite material, Journal of Physics D: Applied Physics, vol.4, issue.8, pp.1176-1181, 1971.
DOI : 10.1088/0022-3727/4/8/318

]. W. Davies-71b and . Davies, The theory of elastic composite materials, Journal of Physics D: Applied Physics, vol.4, issue.9, pp.1325-1339, 1971.
DOI : 10.1088/0022-3727/4/9/313

K. Dedecker and &. G. Groeninckx, Reactive compatibilisation of A

M. Siesler, J. W. Stamm, &. N. Mays, and . Hadjichristidis, Morphology and deformation mechanisms and tensile properties of tetrafunctional multigraft copolymers, Macromolecules, vol.42, issue.12, pp.4155-4164, 2009.

]. J. Falk and &. J. Schlott, Synthesis and Properties of Ethylene-Butene-1 Block Copolymers, Macromolecules, vol.4, issue.2, pp.152-154, 1971.
DOI : 10.1021/ma60020a004

]. V. Ferreiro-04a, &. G. Ferreiro, and . Coulon, Shear banding in strained semicrystalline polyamide 6 films as revealed by atomic force microscopy: Role of the amorphous phase, Journal of Polymer Science Part B: Polymer Physics, vol.24, issue.4, pp.687-701, 2004.
DOI : 10.1002/polb.10731

]. V. Ferreiro-04b, C. Ferreiro, J. Depecker, &. G. Laureyns, and . Coulon, Structures and morphologies of cast and plastically strained polyamide 6 films as evidenced by confocal Raman microspectroscopy and atomic force microscopy, Polymer, vol.45, issue.17, pp.6013-6026, 2004.
DOI : 10.1016/j.polymer.2004.06.018

A. Galeski, A. S. Argon, and &. R. Cohen, Changes in the morphology of bulk spherulitic nylon 6 due to plastic deformation, Macromolecules, vol.21, issue.9, pp.2761-2770, 1988.
DOI : 10.1021/ma00187a021

J. M. Haudin and &. C. Sell, Introduction à la mécanique des polymères, chapitre Mécanismes microscopiques de déformation des polymères semi cristallins, pp.251-273

]. T. Hermel, S. F. Hahn, K. A. Chaffin, W. W. Gerberich, and &. F. Bates, Role of Molecular Architecture in Mechanical Failure of Glassy/Semicrystalline Block Copolymers:?? CEC vs CECEC Lamellae, Macromolecules, vol.36, issue.7, pp.2190-2193, 2003.
DOI : 10.1021/ma021754w

G. Holden, H. R. Kricheldorf, and &. R. Quirk, Thermoplastic elastomers, pp.48-69, 2004.

F. Men, J. Rieger, and &. G. Strobl, Role of the Entangled Amorphous Network in Tensile Deformation of Semicrystalline Polymers, Physical Review Letters, vol.91, issue.9, 2003.
DOI : 10.1103/PhysRevLett.91.095502

V. Miri, O. Persyn, J. M. Lefebvre, R. Seguela, and &. A. Stroeks, Strain-induced disorder???order crystalline phase transition in nylon 6 and its miscible blends, Polymer, vol.48, issue.17, pp.5080-5087, 2007.
DOI : 10.1016/j.polymer.2007.06.039

V. Miri, O. Persyn, J. Lefebvre, and &. R. Seguela, Effect of water absorption on the plastic deformation behavior of nylon 6, European Polymer Journal, vol.45, issue.3, pp.757-762, 2009.
DOI : 10.1016/j.eurpolymj.2008.12.008

Y. Mohajer, G. L. Wilkes, I. C. Wang, and &. J. Mc-grath, Hydrogenated linear block copolymers of butadiene and isoprene: effects of variation of composition and sequence architecture on properties, Polymer, vol.23, issue.10, pp.1523-1535, 1982.
DOI : 10.1016/0032-3861(82)90256-7

K. H. Nitta, Y. W. Shin, H. Hashiguchi, S. Tanimoto, and &. M. Terano, Morphology and mechanical properties in the binary blends of isotactic polypropylene and novel propylene-co-olefin random copolymers with isotactic propylene sequence 1. Ethylene???propylene copolymers, Polymer, vol.46, issue.3, pp.965-975, 2005.
DOI : 10.1016/j.polymer.2004.11.033

M. Jutigny and &. J. Pabiot, Structural and mechanical behavior of nylon-6 films. II. Uniaxial and biaxial drawing, Journal Of Polymer Science Part B-Polymer Physics, vol.39, issue.11, pp.1224-1236, 2001.

O. Persyn, V. Miri, J. M. Lefebvre, V. Ferreiro, T. Brink et al., Mechanical behavior of films of miscible polyamide 6/polyamide 6I-6T blends, Journal of Polymer Science Part B: Polymer Physics, vol.16, issue.12, pp.1690-1701, 2006.
DOI : 10.1002/polb.20825

A. Phatak, L. S. Lim, C. K. Reaves, and &. S. Bates, Toughness of Glassy???Semicrystalline Multiblock Copolymers, Macromolecules, vol.39, issue.18, pp.6221-6228, 2006.
DOI : 10.1021/ma0611319

P. Potschke and &. D. Paul, Formation of Co-continuous Structures in Melt-Mixed Immiscible Polymer Blends, Journal of Macromolecular Science, Part C: Polymer Reviews, vol.37, issue.1, pp.87-141, 2003.
DOI : 10.1002/masy.19900380105

C. Y. Ryu, J. Ruokolainen, G. H. Fredrickson, E. J. Kramer, and &. S. Hahn, Chain Architecture Effects on Deformation and Fracture of Block Copolymers with Unentangled Matrices, Macromolecules, vol.35, issue.6, pp.2157-2166, 2002.
DOI : 10.1021/ma011576r

S. Sakurai, T. Kota, D. Isobe, S. Okamoto, K. Sakurai et al., Synchrotron Small???Angle X???Ray Scattering Studies on Flow???Induced Gyroid to Cylinder Transition in an Elastomeric SBS Triblock Copolymer, Journal of Macromolecular Science, Part B, vol.80, issue.1, pp.1-11, 2004.
DOI : 10.1021/ma00089a025

B. B. Sauer, R. S. Mclean, D. J. Brill, and &. J. Londono, Morphology and orientation during the deformation of segmented elastomers studied with small-angle X-ray scattering and atomic force microscopy, Journal of Polymer Science Part B: Polymer Physics, vol.34, issue.16, pp.1727-1740, 2002.
DOI : 10.1002/polb.10234

R. Seguela and &. J. Prud-'homme, Structural and mechanical-properties of a polyethylene-based thermoplastic elastomer Critical review of the molecular topology of semicrystalline polymers: The origin and assessment of intercrystalline tie molecules and chain entanglements, Seguela 05] R. Seguela, pp.1446-1455, 1989.

R. Seguela, On the Natural Draw Ratio of Semi-Crystalline Polymers: Review of the Mechanical, Physical and Molecular Aspects, Macromolecular Materials and Engineering, vol.22, issue.3, pp.235-244, 2007.
DOI : 10.1002/mame.200600389

M. Shah and &. V. Ganesan, Chain bridging in a model of semicrystalline multiblock copolymers, The Journal of Chemical Physics, vol.130, issue.5, 2009.
DOI : 10.1063/1.3072339

G. F. Shan, W. Yang, M. B. Yang, B. H. Xie, J. M. Feng et al., Effect of temperature and strain rate on the tensile deformation of polyamide 6, Polymer, vol.48, issue.10, pp.2958-2968, 2007.
DOI : 10.1016/j.polymer.2007.03.013

U. Staudinger, R. Schlegel, R. Weidisch, J. Fritzsche, M. Kluppel et al., Interpretation of hysteresis behaviour of PI???PS multigraft copolymers by adapting to the dynamic flocculation model, European Polymer Journal, vol.44, issue.11
DOI : 10.1016/j.eurpolymj.2008.08.005

H. Veenstra, P. C. Verkooijen, B. J. Van-lent, J. Van-dam, A. P. De-boer et al., On the mechanical properties of co-continuous polymer blends: experimental and modelling, Polymer, vol.41, issue.5, pp.1817-1826, 2000.
DOI : 10.1016/S0032-3861(99)00337-7

R. C. Willemse, A. Speijer, A. E. Langeraar, and &. A. De-boer, Tensile moduli of co-continuous polymer blends, Polymer, vol.40, issue.24, pp.6645-6650, 1999.
DOI : 10.1016/S0032-3861(98)00874-X

. Mays, Morphology and tensile properties of multigraft copolymers with regularly spaced tri-, tetra-, and hexafunctional junction points, Macromolecules, vol.39, issue.13, pp.4428-4436, 2006.