P. Arrieta, F. R. , and E. E. Silva-lora, Influence of ambient temperature on combined-cycle power-plant performance, Applied Energy, vol.80, issue.3, pp.261-272, 2005.
DOI : 10.1016/j.apenergy.2004.04.007

C. K. Rice and S. K. Fischer, The Oak Ridge Heat Pump Models: 1. A Steady-State Computer Design Model for Air-To-Air Heat Pumps, 1983.

B. Palm and J. Claesson, Plate Heat Exchangers: Calculation Methods for Single- and Two-Phase Flow (Keynote), ASME 3rd International Conference on Microchannels and Minichannels, Parts A and B, pp.88-98, 2006.
DOI : 10.1115/ICMM2005-75092

J. R. Thome, V. Dupont, and A. M. Jacobi, Heat transfer model for evaporation in microchannels. Part I: presentation of the model, International Journal of Heat and Mass Transfer, vol.47, issue.14-16, pp.3375-3385, 2004.
DOI : 10.1016/j.ijheatmasstransfer.2004.01.006

T. M. Harms, J. E. Braun, and E. A. , The Impact of Modeling Complexity and Two-Phase Flow Parameters on the Accuracy of System Modeling for Unitary Air Conditioners, HVAC&R Research, vol.10, issue.1, pp.5-20, 2004.
DOI : 10.1080/10789669.2004.10391087

G. Kohler, M. Johnson, J. Gonzalez, and J. Corberan, A simulation code to assist the design of refrigeration and A/C equipment, Proceedings of the 11th International Refrigeration and Air Conditioning Conference, p.71, 2006.

M. Youbi-idrissia and J. Bonjour, The effect of oil in refrigeration: Current research issues and critical review of thermodynamic aspects, International Journal of Refrigeration, vol.31, issue.2, pp.165-179, 2008.
DOI : 10.1016/j.ijrefrig.2007.09.006

S. Filfli and D. Marchio, Modèle simple de système de climatisation à débit de réfrigérant variable en vue d'un calcul prévisionnel de consommation, Proceedings IBPSA, 2004.

Z. Chuan, M. Shanwei, C. Jiangpin, and C. Zhijiu, Experimental analysis of R22 and R407C flow through electronic expansion valve, Energy Conversion & Management, pp.529-544, 2006.

C. Rahhal, Conception d'une pompe à chaleur air/eau à haute efficacité énergétique pour la rehabilitation d'installations de chauffage existants, 2006.

Z. H. Ayub, Plate Heat Exchanger Literature Survey and New Heat Transfer and Pressure Drop Correlations for Refrigerant Evaporators, Heat Transfer Engineering, vol.69, issue.5, pp.3-16, 2003.
DOI : 10.1016/0017-9310(94)90033-7

M. M. Shah, A general correlation for heat transfer during film condensation inside pipes, International Journal of Heat and Mass Transfer, vol.22, issue.4, pp.547-556, 1979.
DOI : 10.1016/0017-9310(79)90058-9

J. R. Thome, Condensation in plain horizontal tubes: recent advances in modelling of heat transfer to pure fluids and mixtures, Journal of the Brazilian Society of Mechanical Sciences and Engineering, vol.27, issue.1, pp.23-30, 2005.
DOI : 10.1590/S1678-58782005000100002

D. H. Han, K. J. Lee, and Y. H. Kim, Experiments on the characteristics of evaporation of R410A in brazed plate heat exchangers with different geometric configurations, Applied Thermal Engineering, vol.23, issue.10, pp.1209-1225, 2003.
DOI : 10.1016/S1359-4311(03)00061-9

N. Kim, B. Youn, and R. L. Webb, Heat transfer and friction correlations for plain fin and tube heat exchangers, Proceedings of the 11th International Heat Transfer Conference, pp.209-213, 1998.

D. B. Bivens and A. Yokozeki, Heat transfer coefficients and transport properties for alternative refrigerants, Proceedings of International Conference Purdue, pp.299-303, 1994.

D. B. Bivens and A. Yokozeki, Heat transfer of refrigerant mixtures, International Refrigeration Conference Proceedings, pp.141-148, 1992.

E. Bettanini, A. Gastaldello, and L. Schibuola, Simplified models to simulate part load performances of air conditioning equipments, 2003.

. Eurovent-certifications, Air-conditioning and refrigeration products certification programs according to European and international standards, www.eurovent-certification.com [23] European Standard EN 14511-3 Air conditioners, liquid chilling packages and REFERENCES [ADEME 2007] Les chiffres clés du bâtiment, 2004.

T. Argaud, Thèse de doctoratOptimisation énergétique des cycles de givrage ? dégivrage des PAC inversables air/eau sur plancher destinées au secteur résidentiel, 2001.

J. Benouali, Etudes et minimisation des consommations des systèmes de climatisation automobile, Thèse de doctorat, 2002.

A. Bensafi, S. Borg, I. Naziri, and L. France, Design and simulation of heat pumps and A/C equipment using pure and mixed refrigerants with MoMo (Modular Modelling, CETIAT, 1999.

E. Bettanini, A. Gastaldello, and L. Schibuola, Simplified models to simulate part load performances of air conditioning equipments, 2003.

]. D. Bivens and A. Yokozeki, Heat transfer coefficients and transport properties for alternative refrigerants, Proc. Int. Conf. Purdue, pp.299-303, 1994.

]. D. Bivens and A. Yokozeki, Heat transfer of refrigerant mixtures, Proc. Int. Conf. Purdue, pp.141-148, 1992.

M. Youbi-idrissi, J. Bonjour, M. Terrier, and F. Meunier, Estimation de la charge en fluide frigorigène : état de l'art : Échangeurs thermiques = Estimation of the refrigerant-mass : state of the art, pp.31-38, 2003.

D. Bory, Thèse de doctoratAnalysis and simulation of defects of operation for air conditionning audit, 2008.

D. Clodic, Technologies frigorifiques innovantes pour réduire les impacts environnementaux, 2007.

D. Clodic and . Benamer, Mesures de gains énergétiques associés a la vitesse variable, Revue Pratique du Froid, pp.18-20, 1998.

D. Chisholm, A theoretical basis for the Lockhart-Martinelli correlation for two-phase flow, International Journal of Heat and Mass Transfer, vol.10, issue.12, pp.1767-1778, 1967.
DOI : 10.1016/0017-9310(67)90047-6

C. Cuevas and J. Lebrun, Testing and modelling of a variable speed scroll compressor, Applied Thermal Engineering, vol.29, issue.2-3, pp.469-478, 2009.
DOI : 10.1016/j.applthermaleng.2008.03.016

S. Filfli, Thèse de doctoratOptimisation bâtiment/système pour minimiser les consommations dues à la climatisation, 2004.

S. Filfli and D. Marchio, Modèle simple de système de climatisation à débit de réfrigérant variable en vue d'un calcul prévisionnel de consommation, IBPSA Proceedings, 2004.

N. Flach-malaspina, Thèse de doctorat "Conception globale d'une pompe à chaleur air/eau inversable à puissance variable pour le secteur résidentiel, 2004.

R. Fox, A. Mcdonald, and P. Pritchard, Introduction to fluid mechanics, 2004.

O. Gaveau, Thèse de doctoratEtude expérimentale et modélisation à peu de paramètres de systèmes de climatisation automobile, 1999.

P. Haberschill, O. Nicolae, and M. Lallemand, Caractérisation de détendeurs thermostatiques pour machines frigorifiques au 407C, COFRET'02, Bucarest (Roumanie), pp.210-216, 2002.

P. Haberschill, S. Borg, M. Mondot, and M. Lallemand, Hermetic compressor models determination of parameters from a minimum number of tests, Proceedings Int. Conf. Purdue, 1994.

M. Hamdar, Thèse de doctorat "Conception et optimisation d'un système indirect de climatisation ferroviaire, 2008.

D. H. Han, K. J. Lee, K. , and Y. H. , Experiments on the characteristics of evaporation of R410A in brazed plate heat exchangers with different geometric configurations, Applied Thermal Engineering, vol.23, issue.10, pp.1209-1225, 2003.
DOI : 10.1016/S1359-4311(03)00061-9

M. Todd, E. Braun-james, and A. Eckhard, The impact of modeling complexity and two-phase flow parameters on the accuracy of system modeling for unitary air conditioners, HVAC&R Research Journal; Jan2004, vol.10, issue.1, pp.5-20, 2004.

]. Y. Hayashi, K. Aoki, and H. Yuhara, Study of frost formation based on a theoretical model of the frost layer, Heat Transfer-Japanese Research, vol.6, pp.3-79, 1977.

]. Y. Hayashi, A. Aoki, S. Adachi, and K. Hori, Study of Frost Properties Correlating With Frost Formation Types, Journal of Heat Transfer, vol.99, issue.2, pp.239-245, 1977.
DOI : 10.1115/1.3450675

]. R. Heavner, H. Kumar, and A. S. Wanniaraehehi, Performance of an industrial plate heat exchanger: effect of chevron angle, AlChE Syrup. Set. No. 295 Heat Tramfer, Am. Inst. Chem. Eng, vol.89, pp.262-267, 1993.

S. M. Ilic, C. W. Bullard, and P. Hrnjak, Experimental Comparison of Continuous vs. Pulsed Flow Modulation in Vapor Compression Systems, 2002.

M. José, J. Corberán, P. Gonzálvez, R. Montes, and . Blasco, ART' A computer code to assist the design of refrigeration and A/C equipment, 2002.

S. Kandlikar, Fundamental issues related to flow boiling in minichannels and microchannels, Experimental Thermal and Fluid Science, vol.26, issue.2-4, pp.389-407, 2002.
DOI : 10.1016/S0894-1777(02)00150-4

N. Kim, B. Youn, W. , and R. L. , Air-Side Heat Transfer and Friction Correlations for Plain Fin-and-Tube Heat Exchangers With Staggered Tube Arrangements, Journal of Heat Transfer, vol.121, issue.3, pp.662-667, 1999.
DOI : 10.1115/1.2826030

N. H. Kim, B. Youn, W. , and R. L. , Heat Transfer and Friction Correlations for Plain Fin-and-Tube Heat Exchangers, Proc. 11th Int'l. Heat Transfer Conf, pp.209-213, 1998.

E. Kinab, D. Marchio, and P. Rivière, Modeling of reversible heat pump for seasonal performance optimization, Energy and Building Journal, 2009.

E. Kinab, D. Marchio, and P. Rivière, Importance de la consommation de maintien en température des compresseurs de pompe à chaleur air eau, 2008.

E. Kinab, D. Marchio, and P. Rivière, Seasonal Coefficient of Performance of Heat Pumps, 12th International Refrigeration and Air Conditioning Conference & 19th International Compressor Engineering Conference at Purdue University, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00817356

E. Kinab, A. Fau, D. Marchio, and P. Rivière, Model of a Reversible Heat Pump for Part Load Energy Based Optimization Design, Well Being Indoors Clima2007, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00221983

G. Kohler, M. Johnson, J. Gonzalez, and J. Corberan, MPOWER', A simulation code to assist the design of refrigeration and A/C equipment, Proceedings of the 11th International Refrigeration and Air Conditioning Conference, p.71, 2006.

J. Leroy, E. Groll, and J. Braun, Evaluating the Accuracy of PUREZ in Predicting Unitary Equipment Performance, ASHRAE Transactions, issue.106, 2000.

Z. Liu and R. Winterton, A general correlation for saturated and subcooled flow boiling in tubes and annuli, based on a nucleate pool boiling equation, International Journal of Heat and Mass Transfer, vol.34, issue.11, pp.2759-2766, 1991.
DOI : 10.1016/0017-9310(91)90234-6

G. A. Longo, Refrigerant R134a condensation heat transfer and pressure drop inside a small brazed plate heat exchanger, International Journal of Refrigeration, vol.31, issue.5, pp.31-780, 2008.
DOI : 10.1016/j.ijrefrig.2007.11.017

]. Y. Mao, R. W. Besant, and K. S. Rezkallah, Measurement and correlations of frost properties with airflow over a flat plate, ASHRAE Trans, pp.98-65, 1992.

Y. Mao, R. W. Besant, and J. Falk, Measurement and Correlations of Frost Properties with Laminar Airflow at Room Temperature over a Flat Pate, ASHRAE Trans, vol.99, pp.739-745, 1992.

X. Pan, Thèse de doctoratEtude et modélisation d'un meuble frigorifique de vente (MFV) à haute efficacité énergétique, 2000.

W. Rached, Thèse de doctoratEtude et conception des pompes à chaleur air/eau utilisant des mélanges a grand glissement de température et a faible GWP, 2003.

C. Rahhal, Thèse de doctoratConception d'une pompe à chaleur air/eau à haute efficacité énergétique pour la rehabilitation d'installations de chauffage existants, CEP, Ecole des Mines de Paris. Mines ParisTech [Refprop7] (REFerence fluid PROPerties) program, developed by the National Institute of Standards and Technology NIST, 2006.

C. K. Rice and S. K. Fischer, The Oak Ridge Heat Pump Models: 1. A Steady-State Computer Design Model for Air-To-Air Heat Pumps, 1983.

P. Rivière, Performances saisonnières des groupes de production d'eau glaçée, Thèse de doctorat, 2004.

D. Robinson and E. Groll, Theoretical performance comparison of CO2 transcritical cycle technology for a military packaged air conditioner application, HVAC&R Research, vol.6, issue.4, 2000.

]. T. Senshu, H. Yasuda, K. Oguni, and K. Nishibane, Heat pump performance under frosting conditions. Part I & II. Heat and mass transfer on cross-finned tube heat exchangers under frosting conditions, ASHRAE Trans, pp.96-324, 1990.

]. M. Shah, A general correlation for heat transfer during film condensation inside pipes, International Journal of Heat and Mass Transfer, vol.22, issue.4, pp.547-556, 1979.
DOI : 10.1016/0017-9310(79)90058-9

S. Shao, W. Shi, X. Li, and H. Chen, Performance representation of variable-speed compressor for inverter air conditioners based on experimental data, International Journal of Refrigeration, vol.27, issue.8, pp.805-815, 2004.
DOI : 10.1016/j.ijrefrig.2004.02.008

P. Stabat, Analysis of Building Heating and Cooling Demands, In: Lebrun, J., Heat Pumping and Reversible Air Conditioning, 2007.

A. Talik, L. Swanson, L. Fletcher, and N. Anand, Heat transfer and pressure drop characteristics of a plate heat exchanger, ASME/JSME Thermal Engineering Conference, vol.4, pp.321-329, 1995.

J. R. Thome and G. Ribatski, State-of-the-art of two-phase flow and flow boiling heat transfer and pressure drop of CO2 in macro- and micro-channels, International Journal of Refrigeration, vol.28, issue.8, pp.1149-1168, 2005.
DOI : 10.1016/j.ijrefrig.2005.07.005

J. R. Thome, V. Dupont, and A. M. Jacobi, Heat transfer model for Mines ParisTech evaporation in microchannels Part I, Part II, International Journal of Heat and Mass Transfer, vol.47, 2004.

R. L. Webb, M. Zhang, and R. Narayanamurthy, Condensation heat transfer in small diameter tubes, Proc. Of the 11 th Int. Heat Transfer Conf, pp.403-408, 1998.

A. Zoughaib and D. Clodic, Vitesse variable des compresseurs et lubrificaiton', Revue générale du froid & air conditionnement, n° Mai, 2005.