Tolérance aux défauts initiaux : Application à une fonte GS en fatigue, 1996. ,
Porosity and the fatigue behavior of hypoeutectic and hypereutectic aluminum???silicon casting alloys, International Journal of Fatigue, vol.30, issue.6, pp.1024-1035, 2008. ,
DOI : 10.1016/j.ijfatigue.2007.08.012
Fatigue behaviour of AA356-T6 cast aluminium alloy weakened by cracks and notches, Engineering Fracture Mechanics, vol.71, issue.4-6, pp.759-768, 2004. ,
DOI : 10.1016/S0013-7944(03)00036-5
Etude par tomographie X et modélisation de l'endommagement de matériaux métalliques, 2005. ,
Zeit und dauerfestigkeit bei uberlagerter statischer und schwingender zugdruck und torsionsbeanspruchung, Diss. Uni. Stuttgart, 1970. ,
Prévision de la durée de vie en fatigue multiaxiale sous spectre de chargement réel : vers des essais accélérés, 2001. ,
Etude du comportement et de l'endommagement en fatigue d'alliages d, 2004. ,
URL : https://hal.archives-ouvertes.fr/tel-00162056
The effect of high hydrostatic stress in multiaxial high cycle fatigue, th International conference on multiaxial fatigue and fracture, 2007. ,
A Biaxial Fatigue Specimen for Uniaxial Loading, Strain, vol.13, issue.3, 2009. ,
DOI : 10.1111/j.1475-1305.2009.00674.x
URL : https://hal.archives-ouvertes.fr/hal-00953546
Influence des fortes contraintes hydrostatiques sur la résistance en fatigue d'un alliage d'aluminium AS7G03U, 2005. ,
Validation of the step test method for generating Haigh diagrams for Ti???6Al???4V, International Journal of Fatigue, vol.21, issue.7, pp.687-697, 1999. ,
DOI : 10.1016/S0142-1123(99)00032-8
Approche énergetique non locale du calcul de durée de vie de structures en fatigue multiaxiale sous chargements d'amplitude variable. Application à une roue de train ferroviaire, 2006. ,
Fatigue multiaxiale d'une fonte GS, influence de l'entaille et d'un traitement thermique, 1993. ,
A ductile fracture analysis using a local damage model, International Journal of Pressure Vessels and Piping, vol.85, issue.4, pp.219-227, 2008. ,
DOI : 10.1016/j.ijpvp.2007.09.003
URL : https://hal.archives-ouvertes.fr/hal-00273717
Multiaxial fatigue limit for defective materials: mechanisms and experiments, Acta Materialia, vol.52, issue.13, pp.3911-3920, 2004. ,
DOI : 10.1016/j.actamat.2004.05.006
Experimental study of porosity and its relation to fatigue mechanisms of model Al???Si7???Mg0.3 cast Al alloys, Materials Science and Engineering: A, vol.316, issue.1-2, pp.115-126, 2001. ,
DOI : 10.1016/S0921-5093(01)01225-4
URL : https://hal.archives-ouvertes.fr/hal-00475354
The influence of heat treatment and solidification time on the behavior of small-fatigue-cracks in a cast aluminum alloy, Materials Science and Engineering: A, vol.314, issue.1-2, pp.81-85, 1998. ,
DOI : 10.1016/S0921-5093(00)01916-X
The effect of solidification rate on the growth of small fatigue cracks in a cast 319-type aluminum alloy, Metallurgical and Materials Transactions A, vol.6, issue.4, 1998. ,
DOI : 10.1007/s11661-999-0216-4
Gaz dans les alliages d'aluminium de fonderie, Techniques de l'Ingénieur, traité matériaux métalliques M, pp.218-219, 1991. ,
Revisiting the Dang Van criterion, Procedia enginnering 1, pp.143-146, 2009. ,
DOI : 10.1016/j.proeng.2009.06.033
Dissipative aspects in high cycle fatigue Mechanics of Materials 41, pp.483-494, 2009. ,
Approche dissipative en fatigue : influence de la contrainte moyenne en fatigue polycyclique, 2007. ,
Void Nucleation Effects in Biaxially Stretched Sheets, Journal of Engineering Materials and Technology, vol.102, issue.3, 1980. ,
DOI : 10.1115/1.3224807
Prise en compte des contraintes r??siduelles de traitement thermique dans la pr??diction de la tenue en service des culasses en aluminium, Proceedings of 17eme Congrès Français de Mécanique, pp.343-348, 2005. ,
DOI : 10.1051/meca:2005039
CASTING DEFECTS AND THE FATIGUE BEHAVIOUR OF AN ALUMINIUM CASTING ALLOY, Fatigue & Fracture of Engineering Materials and Structures, vol.29, issue.3, pp.213-240, 1990. ,
DOI : 10.1016/0013-7944(79)90030-4
Effect of large hydrostatic pressures on the torsional fatigue strength of an alloy steel. Int. Conference on Fatigue of Metals. Institution of mechanical engineers, pp.138-149, 1956. ,
Sur la résistance à la fatigue des Métaux, 1973. ,
Introduction to Fatigue Analysis in Mechanical Design by the Multiscale Approach, High cycle metal fatigue CISM courses and lectures SpringerWienNewYork, 1999. ,
DOI : 10.1007/978-3-7091-2474-1_2
URL : https://hal.archives-ouvertes.fr/hal-00112495
Independence of the torsional fatigue limit upon a mean shear stress, International Journal of Fatigue, vol.25, issue.6, pp.471-480, 2003. ,
DOI : 10.1016/S0142-1123(02)00174-3
Triaxialité des contraintes et critère de non-fragilité. Bull l'Assoc, pp.481-91, 1969. ,
Fatigue multiaxiale des aciers. Passage de l'endurance à l'endurance illimitée. Prise en compte des accidents géométriques, Thèse de doctorat, 1992. ,
Prediction of non propagating cracks Eng F Mech, pp.573-584, 1979. ,
Dauerfestigkeit bei uberlagerter zweiachsiger statischer beanspruchung, pp.253-257, 1977. ,
Fatigue crack closure under cyclic tension Eng F Mech, pp.37-45, 1970. ,
A criterion for fatigue under multiaxial states of stress, Mechanics Research Communications, vol.1, issue.4, pp.219-224, 1974. ,
DOI : 10.1016/0093-6413(74)90068-8
In-phase and out-of-phase multiaxial fatigue. Transaction of ASME, pp.112-118, 1991. ,
A model of extrusions and intrusions in fatigued metals I. Point-defect production and the growth of extrusions, Philosophical Magazine A, vol.40, issue.2, pp.405-426, 1981. ,
DOI : 10.1080/01418618108239541
Cyclic plasticity at pores and inclusions in cast Al???Si alloys, Engineering Fracture Mechanics, vol.70, issue.10, pp.1281-1302, 2003. ,
DOI : 10.1016/S0013-7944(02)00097-8
A theory for the effect of mean stress on fatigue of metals under combined torsion and axial load or bending, Journal of engineering for Industry (Transactions of ASME, pp.301-306, 1959. ,
Contribution à la modélisation du dommage en fatigue multiaxiale d'un acier C36-Confrontation avec l'expérience, Thèse de doctorat, 2004. ,
Probabilistic approach in multiaxial high cycle fatigue : volume and surface effects. Fatigue and Fracture of eng. mat. and struc, pp.1123-1135, 2004. ,
Fatigue des aciers sous sollicitations combinées. Application à l'acier 30NCD16, Talence. Ensam Rapport DRET-LAMEF-ENSAM, vol.87115, 1988. ,
Validité des critères de fatigue multiaxiale à l'endurance en flexion-torsion, pp.79-85, 1992. ,
Contribution à l'étude de l'endommagement des aciers sous sollicitations uni ou multi-axiales, 1993. ,
A micro-cell model of the effect of microstructure and defects on fatigue resistance in cast aluminum alloys, Acta Materialia, vol.52, issue.19, pp.5435-5449, 2004. ,
DOI : 10.1016/j.actamat.2004.07.035
Bestimmung der zulässigen spannungen in eisen-constructionen. [Calculation of the allowable stresses in iron structures], Z Bayer Archit Ing Ver, vol.6, issue.6, pp.101-111, 1874. ,
A MULTIAXIAL FATIGUE STRAIN ENERGY DENSITY PARAMETER RELATED TO THE CRITICAL FRACTURE PLANE, Fatigue & Fracture of Engineering Materials and Structures, vol.110, issue.3, pp.37-46, 1995. ,
DOI : 10.1111/j.1460-2695.1995.tb00140.x
Multiaxial fatigue: a stress based criterion for hard metals, International Journal of Fatigue, vol.27, issue.2, pp.177-87, 2005. ,
DOI : 10.1016/j.ijfatigue.2004.05.006
Studies on the friction and lubrication characteristics in the sheet steel drawing process, Journal of Materials Processing Technology, vol.151, issue.1-3, pp.328-333, 2004. ,
DOI : 10.1016/j.jmatprotec.2004.04.082
Mechanics applied to engineering, 1st Ed London: Longmans, 1899. ,
Some experiments on the resistance of metals to fatigue under combined stresses, ARC, Report and Memoranda N°2522, 1951. ,
Int. Conf. Fatigue Testing and Design, Society of environmental Engineers, pp.27-28, 1976. ,
Localized corrosion of 2024 T351 aluminium alloy in chloride media, Corrosion Science, vol.41, issue.3, pp.421-438, 1999. ,
DOI : 10.1016/S0010-938X(98)00116-4
Plastic flow and fracture behavior of ductile metals incorporating void nucleation, growth and interaction Thèse de doctorat, 1975. ,
Continuum Theory of Ductile Rupture by Void Nucleation and Growth: Part I???Yield Criteria and Flow Rules for Porous Ductile Media, Journal of Engineering Materials and Technology, vol.99, issue.1, pp.2-15, 1977. ,
DOI : 10.1115/1.3443401
On small fatigue crack growth and crack closure under mixed-mode and through zero loading in the aluminium alloys 2024-T351 and 8090-T8771, International Journal of Fatigue, vol.29, issue.7, pp.1195-1207, 2007. ,
DOI : 10.1016/j.ijfatigue.2006.10.018
On predicting small fatigue crack growth and fatigue life from long crack data in 2024 aluminium alloy, International Journal of Fatigue, vol.25, issue.8, pp.709-718, 2003. ,
DOI : 10.1016/S0142-1123(03)00052-5
Schubspannungsintensitäshypothese-Dauerschwingfestigkeit bei mehrachsiger beanspruchung, Forschungshefte FKM, 1983. ,
Hétérogénéité des contraintes et rupture des materiaux fragile, C.R. Acad. Sci; Paris, vol.315, issue.II, pp.1293-1298, 1992. ,
Experimental Study and Local Approach Modelling of Ductile Damage in Steels Over a Wide Temperature Range, 2009. ,
The in-situ fatigue testing of a cast aluminum-silicon alloy, Theoretical and Applied Fracture Mechanics, vol.10, issue.1, p.27, 1988. ,
DOI : 10.1016/0167-8442(88)90054-7
Effet des hétérogéneités microstructurales sur le comportement en fatigue multiaxiale à grand nombre de cycles, Thèse de doctorat. Arts et Métiers ParisTech Centre d'Angers LPMI, 2008. ,
Festigkeitsverhalten metallischer werkstoffe bei mehrachsiger phasenverschobener beanspruchung, Diss. Uni. Stuttgart, 1973. ,
Propagation de fissures superficielles et de réseaux de fissures en fatigue isotherme biaxiale et fatigue thermique dans l'acier inoxydable 304L, 2005. ,
The influence of high R ratio on unnotched fatigue behavior of 1045 steel with three different heat treatments, International Journal of Fatigue, vol.25, issue.3, pp.191-200, 2003. ,
DOI : 10.1016/S0142-1123(02)00116-0
The effect of the stress ratio on fatigue crack growth in a 3% NaCl solution Eng F Mech, pp.857-870, 1982. ,
Applicability of fracture mechanics to very small cracks, Proceedings of the second International Conference on Mechanical Behaviour of Materials, pp.627-631, 1976. ,
Effect of stress cycle asymmetry on fatigue crack growth, Materials Science and Engineering, vol.9, pp.231-240, 1972. ,
DOI : 10.1016/0025-5416(72)90038-9
Application of the Dang-Van criterion for life determination under uniaxial random tension-compression with different mean values, Fatigue <html_ent glyph="@amp;" ascii="&"/> Fracture of Engineering Materials and Structures, vol.68, issue.6, pp.505-512, 2004. ,
DOI : 10.1016/0142-1123(82)90018-4
A fatigue crack driving force parameter with load ratio effects, International Journal of Fatigue, vol.23, pp.236-282, 2001. ,
DOI : 10.1016/S0142-1123(01)00158-X
A fatigue crack growth model with load ratio effects, Engineering Fracture Mechanics, vol.28, issue.4, pp.367-378 ,
DOI : 10.1016/0013-7944(87)90182-2
A unified approach to mean stress effect on fatigue threshold conditions, International Journal of Fatigue, vol.17, issue.2, pp.101-106, 1995. ,
DOI : 10.1016/0142-1123(95)95888-N
Fatigue life prediction from inclusion initiated cracks, International Journal of Fatigue, vol.20, issue.4, pp.263-270, 1998. ,
DOI : 10.1016/S0142-1123(97)00136-9
An improved Gurson-type model for hardenable ductile metals Eur, J. Mech. A/Solids, vol.14, issue.4, pp.499-527, 1995. ,
Effect of silicon particles on the fatigue crack growth characteristics of Al-12 Wt Pct Si-0.35 Wt Pct Mg-(0 to 0.02) Wt Pct Sr casting alloys, Metallurgical and Materials Transactions A, vol.6, issue.1, pp.1553-1570, 1995. ,
DOI : 10.1007/BF02647606
A criterion for low cycle fatigue failure under biaxial states of stresses, Trans. ASME JEMT, vol.103, pp.1-6, 1988. ,
A continuous damage mechanics model for ductile fracture J. of engineering Materials and technology, Trans. of ASME, vol.107, pp.83-89, 1985. ,
Engineering damage mechanics, 2005. ,
A two scale damage concept applied to fatigue, International Journal of Fracture, vol.97, issue.1/4, pp.67-81, 1999. ,
DOI : 10.1023/A:1018641414428
Quantification of the interaction within defect populations on fatigue behavior in an aluminum alloy, Acta Materialia, vol.57, issue.12, pp.3539-3548, 2009. ,
DOI : 10.1016/j.actamat.2009.04.008
Plasticité couplée à l'endommagement en conditions quasi unilatérales pour la prévision de l'amorçage de fissures, 1989. ,
The influence of porosity on the fatigue life for sand and permanent mould cast aluminium, International Journal of Fatigue, vol.28, issue.12, pp.1752-1758, 2006. ,
DOI : 10.1016/j.ijfatigue.2006.01.001
Berechnung der Dauerschwingfestigkeit bei mehrachsiger Beanspruchung-Teil 1, p.240, 1993. ,
DOI : 10.1002/mawe.19930240706
Fatigue limit of ductile metals under multiaxial loading Biaxial, 2003. ,
Energy criteria of multiaxial fatigue failure, Fatigue <html_ent glyph="@amp;" ascii="&"/> Fracture of Engineering Materials and Structures, vol.37, issue.12, pp.1053-1070, 1999. ,
DOI : 10.1016/0308-0161(96)00008-7
Energy criteria of multiaxial fatigue failure, Fatigue <html_ent glyph="@amp;" ascii="&"/> Fracture of Engineering Materials and Structures, vol.37, issue.12, pp.1053-1070, 1999. ,
DOI : 10.1016/0308-0161(96)00008-7
Initiation and growth of damage in a dual-phase steel observed by X-ray microtomography, Acta Materialia, vol.56, issue.18, pp.4954-4964, 2008. ,
DOI : 10.1016/j.actamat.2008.06.015
URL : https://hal.archives-ouvertes.fr/hal-00433954
Development of a testing method in high cycle fatigue on a specimen with foundry skin, 2007. ,
An Explanation on Fatigue Limit under Combined Stress, Bulletin of JSME, vol.20, issue.141, p.141, 1977. ,
DOI : 10.1299/jsme1958.20.257
Influence of porosity on the fatigue limit of die cast magnesium and aluminium alloys, International Journal of Fatigue, vol.25, issue.3, pp.245-256, 2003. ,
DOI : 10.1016/S0142-1123(02)00054-3
Fatigue under out-of-phase bending and torsion Fatigue and fracture of engineering materials and structures, p.6, 1987. ,
Microstructure-based fatigue modeling of cast A356-T6 alloy, Eng. Frac. Mec, vol.70, pp.49-80, 2003. ,
A study of nucleation and fatigue behavior of an aerospace aluminum alloy 2024-T3, International Journal of Fatigue, vol.27, issue.1, pp.33-44, 2005. ,
DOI : 10.1016/j.ijfatigue.2004.06.010
Festigkeitsverhalten metallischer werkstoffe unter zweiachsiger schwingender beanspruchung mit verschiedenen spannungszeitverläufen Diss, TH Aachen, p.89, 1980. ,
Contributions à la modélisation micromécanique de l'endommagement et de la fatigue des métaux ductiles, 2006. ,
A critical plane approach for life prediction of high cycle fatigue under multiaxial variable amplitude loading, International Journal of Fatigue, vol.22, issue.2, pp.101-119, 2000. ,
DOI : 10.1016/S0142-1123(99)00118-8
Comparison between defects and micro-notches in multiaxial fatigue ??? The size effect and the gradient effect, International Journal of Fatigue, vol.31, issue.2, pp.263-275, 2009. ,
DOI : 10.1016/j.ijfatigue.2008.09.005
URL : https://hal.archives-ouvertes.fr/hal-00809338
A non local theory applied to high cycle multiaxial fatigue. Fatigue and fracture of engineering materials and structures, pp.649-665, 2002. ,
URL : https://hal.archives-ouvertes.fr/hal-01376167
Comparative study and link between mesoscopic and energetic approaches in high cycle multiaxial fatigue, International Journal of Fatigue, vol.23, issue.4, pp.317-327, 2001. ,
DOI : 10.1016/S0142-1123(00)00100-6
URL : https://hal.archives-ouvertes.fr/hal-01372757
Metal Fatigue : effects of small defects and non-metallics inclusion, 2002. ,
Stress intensity factors handbooks, 1987. ,
Fatigue Properties of Sand Cast, Stircast and Extruded Al–7Si–0.3Mg Alloy with Trace Additions of Be and Mn, Materials Transactions, JIM, vol.38, issue.1, p.28, 1997. ,
DOI : 10.2320/matertrans1989.38.28
Multiaxial fatigue limit criterion for defective materials, Engineering Fracture Mechanics, vol.73, issue.1, pp.112-133, 2006. ,
DOI : 10.1016/j.engfracmech.2005.06.005
Fatigue failure of suspension arm: experimental analysis and multiaxial criterion, Engineering Failure Analysis, vol.11, issue.4, pp.485-499, 2004. ,
DOI : 10.1016/j.engfailanal.2003.12.001
the strength of metals under combined alternating bending and torsion with phase difference. Memoirs of college of engineering, pp.85-113, 1945. ,
Theory of elasticity (Sherrkon, JJ, trans.), Israel Program for Scientific Translation, 1961. ,
Fatigue multiaxiale d'une fonte GS sous sollicitations combinées d'amplitude variable, 1996. ,
Approche énergétique et volumique de la fatigue multiaxiale des métaux, 2004. ,
An energy based criterion for high cycle multiaxial fatigue, European Journal of Mechanics - A/Solids, vol.17, issue.2, pp.237-251, 1998. ,
DOI : 10.1016/S0997-7538(98)80084-3
URL : https://hal.archives-ouvertes.fr/hal-01376427
An energy based criterion for high cycle multiaxial fatigue, European Journal of Mechanics - A/Solids, vol.17, issue.2, pp.237-251, 1998. ,
DOI : 10.1016/S0997-7538(98)80084-3
URL : https://hal.archives-ouvertes.fr/hal-01376427
High cycle metal fatigue : from theory to applications. Multiaxial fatigue limit criterion of metals: a mesoscopic scale approach. K. Dang Van et I.V. Papadopoulos, pp.89-156, 1999. ,
URL : https://hal.archives-ouvertes.fr/hal-00112732
Fatigue limit of metals under multiaxial stress conditions: the microscopic approach, ISEI/IE 2464/93. Commision of the European Communities Joint Research Center, 1993. ,
A comparative study of multiaxial high-cycle fatigue criteria for metals, International Journal of Fatigue, vol.19, issue.3, pp.219-235, 1997. ,
DOI : 10.1016/S0142-1123(96)00064-3
A survey on evaluating the fatigue limit under multiaxial loading, International Journal of Fatigue, vol.33, issue.2, pp.153-165, 2011. ,
DOI : 10.1016/j.ijfatigue.2010.08.001
Two new multiaxial criteria for high cycle fatigue computation, International Journal of Fatigue, vol.30, issue.1, pp.58-66, 2008. ,
DOI : 10.1016/j.ijfatigue.2007.02.015
Comportement anisotrope en fatigue des composants mécaniques forgés, 2009. ,
The preferred fatigue crack propagation mode in a M250 maraging steel loaded in shear, Fatigue & Fracture of Engineering Materials & Structures, vol.8, issue.2, pp.173-183, 1999. ,
DOI : 10.1046/j.1460-2695.1999.00161.x
URL : https://hal.archives-ouvertes.fr/hal-00111621
The Behaviour of Short Fatigue Cracks, p.215, 1986. ,
Etude de l'endomagement d'un acier inoxydable austénitique par fatigue multiaxiale à grand nombre de cycles Journées de printemps SF2M, 2009. ,
DOI : 10.1051/metal/2010006
Predicting the onset of high cycle fatigue damage : an enginnering application for long crack fatigue threshold data, Int J Fatigue, vol.8, pp.4-187, 1986. ,
The fractography of casting alloys, Materials Characterization, vol.33, issue.3, p.275, 1994. ,
DOI : 10.1016/1044-5803(94)90048-5
On the ductile enlargement of voids in triaxial stress fields???, Journal of the Mechanics and Physics of Solids, vol.17, issue.3, pp.201-217, 1969. ,
DOI : 10.1016/0022-5096(69)90033-7
Heat treatment parameters for A 359/Al2O3/10p composite modified with 0.07 wt% strontium Composites Science and technology 53, pp.85-98, 1994. ,
Identification des mecanismes et approche quantitative de la fatigue Sawert, Zeitschrift des Vereins Deutscher Ingenieure, VDI ? Zeischrift Bd, 1943. ,
Effect of strontium modification on near- threshold fatigue crack growth in an Al-Si-Cu die cast alloy, Metallurgical and Materials Transactions A, vol.10, issue.1, pp.1293-1302, 1996. ,
DOI : 10.1007/BF02649866
Threshold for fatigue crack propagation and the effects of load ratio and freqeuncy ASTM STP, pp.79-94, 1973. ,
Fatigue thermique multiaxiale à température variable, Thèse de doctorat, 1998. ,
Festigkeitsverhalten zäher werkstoffe bei einer mehrachsigen phasenverschobenen schwingbeanspruchung mit körperfesten und veränderlichen hautspannunggsrichtungen L, B.F, vol.247, p.121, 1975. ,
Metal Fatigue. Behavior of metals under complex static and alternating stresses, pp.145-169, 1959. ,
Fatigue life assessment of aluminum alloys with casting defects, Engineering Fracture Mechanics, vol.44, issue.6, pp.857-874, 1993. ,
DOI : 10.1016/0013-7944(93)90108-5
Factor of safety and working stress, Trans Am Soc Mech Eng, vol.52, pp.13-28, 1930. ,
On the influence of environment on the load ratio dependence of fatigue thresholds in pressure vessel steel, Engineering Fracture Mechanics, vol.18, issue.4, pp.4-785, 1982. ,
DOI : 10.1016/0013-7944(83)90124-8
Resistance-curve method for predicting propagation threshold of short fatigue cracks at notches, Engineering Fracture Mechanics, vol.30, issue.6, pp.6-863, 1988. ,
DOI : 10.1016/0013-7944(88)90146-4
A Dislocation Model for Fatigue Crack Initiation, Journal of Applied Mechanics, vol.48, issue.1, pp.97-103, 1981. ,
DOI : 10.1115/1.3157599
Fatigue thresholds : their applicability to engineering situations Int J Fatigue, pp.67-79, 1988. ,
Fatigue behavior of A356-T6 aluminum cast alloys. Part I. Effect of casting defects, Journal of Light Metals, vol.1, issue.1, pp.73-84, 2000. ,
DOI : 10.1016/S1471-5317(00)00008-0
Fatigue behavior of A356/357 aluminum cast alloys. Part II ??? Effect of microstructural constituents, Journal of Light Metals, vol.1, issue.1, pp.85-97, 2001. ,
DOI : 10.1016/S1471-5317(00)00009-2
Evaluation and comparison of several multiaxial fatigue criteria, International Journal of Fatigue, vol.26, issue.1, 2003. ,
DOI : 10.1016/S0142-1123(03)00110-5
Fatigue multiaxiale des structures industrielles sous chargement quelconque, Thèse de doctorat, 1999. ,
A statistical theory of the strength of materials, Proc. R. Swed. Acad. Eng. Sci, 1939. ,
A critical review on multiaxial fatigue assessments of metals, International Journal of Fatigue, vol.18, issue.4, pp.235-244, 1995. ,
DOI : 10.1016/0142-1123(96)00002-3
On the fatigue limit of ductile metals under complex multiaxial loading, International Journal of Fatigue, vol.22, issue.2, pp.137-145, 2000. ,
DOI : 10.1016/S0142-1123(99)00107-3