W. Arand, Test methods to estimate the fatigue behaviour of asphalt -technical test spectification resistance of asphalt to fatigue at medium and low temperature -swelling tensile test, Eurasphalt & Eurobitume Congress, 2004.

M. Arzan, Fayat recycling book, p.140, 2007.

R. Baroux and J. Et-bonnot, Le recyclage en centrale des enrobés bitumineux: une opération simple à première vue une technique qui pose des problèmes au laboratoires, pp.89-92, 1982.

R. Baroux, M. Champion, and J. Et-poirier, Recyclage des enrobés en centrale. Aspects techniques, pp.78-84, 1982.

H. Berthiaux, Mélange et homogénéisation des solides divisés, p.20, 2002.

J. Berthier, Le recyclage en centrale des enrobés bitumineux: Note technique provisoire, p.28, 1982.

G. Bicheron, F. Migliori, and B. Et-brûlé, Bitume régénéré ou bitume + régénérant, pp.83-88, 1992.

E. Bolk and . Zwan, Thermal conversion of tar-containing asphalt integrated into the asphalt production process in combinaistion with energy recuvery and re-use of minerals, p.10, 2000.

S. Carpenter and J. Et-wolosick, Modifier influence in the caracterization of hot-mix recycled materials, Transportation Research Record, vol.777, pp.15-22, 1980.

B. Cazacliu and F. Et-chevoir, Modélisation de la fabrication des matériaux granulaires du génie civill -Cahier des charges-. " (Opération fr recherche 11P102, p.10, 2009.

M. Chappat and J. Et-plaut, Le recyclage des enrobés en centrale. Bilan un an aprés, pp.5-15, 1982.

D. Colwill, Recyclage des chaussées souples existantes, AIPCR, p.40, 2001.

J. Corté, Conception et dimensionnement des structures de chaussées -Guide technique, p.260, 1994.

M. Dalibart and L. Et-servant, P2845 Spectroscopie dans l'infrarouge, Techniques de l'Ingénieur, traité Analyse et Caractérisation, p.26, 2000.

J. S. Daniel and A. Et-lachance, Mechanistic and Volumetric Properties of Asphalt Mixtures with Recycled Asphalt Pavement, Transportation Research Record: Journal of the Transportation Research Board, vol.1929, issue.1, pp.1929-1938, 2005.
DOI : 10.3141/1929-04

J. L. Delorme, Manuel LPC d'aide à la formulation des enrobés à chaud: LPC mix design guide, Etudes et recherches des Laboratoires des ponts et chaussées. Série Chaussées, p.199, 2007.

H. Desplanches and J. Et-chevalier, Mélange des milieux pâteux de rhéologie complexe: pratique, p.13, 1999.

D. Asphaltverband, Wiederverwenden von asphalt, Deutscher Asphaltverband, p.60, 2009.

D. Benedetto, D. Et-breuil, and P. , Spectrophotométrie d'absorption dans l'ultraviolet et le visible, p.20, 2007.

M. T. Do, Z. Tang, M. Kane, and F. Et-de-larrard, Evolution of road-surface skid-resistance and texture due to polishing, Wear, vol.266, issue.5-6, pp.5-6574, 2009.
DOI : 10.1016/j.wear.2008.04.060

URL : https://hal.archives-ouvertes.fr/hal-00425408

C. Druta, L. Wang, and T. Et-zhu, Laboratory Investigation of Reclaimed Asphalt Pavement Mixed with Pure Binder Using X-Ray CT Scanner, ICCTP 2009, p.10, 2009.
DOI : 10.1061/41064(358)366

M. Ducasse, Evolution du matériel Revue générale des routes et des aérodromes, pp.88-91, 2003.

A. Dumont and A. Et-junod, Formulation et optimisation des formules d'enrobé. EPFL-LAVOC, p.89, 2004.

M. Duriez and J. Et-arrambide, Nouveau traité de matériaux de construction -II. Dunod, p.1491, 1962.

M. Duriez and J. Et-arrambide, Nouveau traité des matériaux de construction -III. Dunod, p.1543, 1962.

E. Beze and L. , Recyclage à chaud des agrégats d'enrobés bitumineux: Identification de traceurs d'homogénéité du mélange entre bitume vieilli et bitume neuf d'apport, p.344, 2008.

M. Elseifi, I. Al-qadi, S. Yang, and S. Et-carpenter, Validity of asphalt binber film thickness concept in hot mix asphalt, TRB 2008 Annual meeting, pp.8-060316, 2008.

P. Gandil and P. Et-vesseron, Circulaire n° 2001-39 du 18 juin 2001 relative à la gestion des déchets du réseau routier national, p.11, 2001.

J. Goupy, Tutoriel: Les plans d'expériences, pp.74-116, 2006.

A. Government, Transportation laboratory test procedure TLT-300 (03) Mix Design Method for Asphalt Concrete Pavement, RACP aggregate and asphalt requirements and rheology design and pre-engineering materials evaluation, p.11, 2008.

E. Harrigan, Recommended use of reclaimed asphalt pavement in the superpave mix design method: Guidlines, National Cooperative Highway Research Program, issue.253, p.17, 2001.

B. Huang, G. Li, D. Vukosavljevic, X. Shu, and B. K. Et-egan, Laboratory Investigation of Mixing Hot-Mix Asphalt with Reclaimed Asphalt Pavement, Transportation Research Record: Journal of the Transportation Research Board, vol.1929, issue.1, pp.192937-192982, 2005.
DOI : 10.3141/1929-05

M. Huet and J. Et-poirier, Méthodologie d'étude en laboratoire des enrobés bitumineux de recyclage, pp.89-94, 1986.

A. Imtiaz, Use of waste materials in highway construction. Joint transportation reseach program, p.111, 1991.

P. Kandhal and K. Et-foo, Designing recycled hot mix asphalt mixtures using Superpave technology. NCAT 96-5, p.19, 1997.

R. Karlsson and U. Et-isacsson, Application of FTIR to characterisation of bitumen rejuvenator diffusion, Journal of Materials in Civil Engineering, vol.15, issue.2, p.8, 2003.

R. Karlsson and U. Et-isacsson, Laboratory studies of diffusion in bitumen using markers, Journal of Materials Science, vol.38, issue.13, pp.2835-2844, 2003.
DOI : 10.1023/A:1024476217060

M. Labrie, Contrôle de la qualité du bitume PG H-L Bulletin d'information technique, p.2, 1998.

N. En, NF EN 12697-26 : Méthodes d'essai pour mélange hydrocarboné à chaud - Mélanges bitumineux -Partie 26 : module de rigidité, pp.12697-12723, 2004.

N. En, NF EN 12697-35: Méthode d'essai pour mélange hydrocarboné à chaud- Partie 35: Malaxage en laboratoire, pp.12697-12732, 2007.

N. En, NF EN 14769: Bitumes et liants bitumineux Vieillissement long terme accéléré réalisé dans un récipient de vieillissement sous pression, 2006.

N. P98-149, NF P98-149: Enrobés hydrocarbonés. Terminologie, 2000.

V. H. Nguyen, Effects of laboratory mixing methods and RAP materials on performance of hot recycled asphalt mixtures, 2009.

C. Nielsen, Modified bitumen in porous pavement -Assesment of test sections, Danish Road Institute -Technical note 53, 2007.

A. Noureldin and L. Et-wood, Rejuvenator diffusion in binder film for hot-mix recycled asphalt pavement, Transportation research record, pp.51-61, 1115.

G. Pepin, C. Brazillet, and J. Et-domas, Caractérisation des déchets, INERIS, p.85, 2001.

B. Pouteau, Durabilité mécanique du collage blanc sur noir dans les chaussées, Ecole Centrale de Nantes, p.306, 2004.

B. D. Prowell, Warm mix asphalt: The internationnal scanning program -Summary report, p.21, 2007.

P. G. Redelius, Solubility parameters and bitumen, Fuel, vol.79, issue.1, pp.27-35, 2000.
DOI : 10.1016/S0016-2361(99)00103-9

P. Renken, Reuse of higher amouts of reclaimed asphalt in the surface cours -Basics to processing techniques and mechanical properties, p.8, 2004.

W. Rohsenow, J. Harnett, and E. Et-ganic, Handbook of heat transfert fundamentals. Mac Graw- Hill Compagnies, p.1413, 1985.

P. Rossi and L. Et-gavois, C5360-Propriété des matériaux naturels, p.14, 2005.

J. Samuels, Recommended use of reclaimed asphalt pavement in the superpave mix design method: Technician's manual, NCHRP Report Transportation Research Board, vol.452, p.58, 2001.

G. Scranton, State of the Practice for Use of RAP in Hot-mix Asphalt, Roads and Bridbes, p.3, 1999.

J. Serfass, C5620-Recyclage en centrale des matériaux de chaussée, 2008.

J. Serfass, X. Carbonneau, and F. Et-delfosse, Enrobés à l'émulsion -Comportement et évaluation des BBE, pp.36-43, 2011.

J. Sherwood, X. Qi, and P. Et-romero, GS3-1: Full-scale pavement fatigue testing fram FHWA Superpave validation study, Internationnal conference on accelerated pavement testing, p.27, 1999.

X. Silverstein, Spectrométrie de composés organiques, p.502, 1998.

R. Ulrich, M. Koppaiah, and V. Et-majmudar, Application of the rotating disk method to the study of bitumen dissolution into organic solvents, The Canadian Journal of Chemical Engineering, vol.4, issue.4, p.8, 1991.
DOI : 10.1002/cjce.5450690403

J. Vecoven, M. Ballié, J. Poirier, and J. Et-deleurence, Bilan des chantiers de recyclage fort taux, pp.61-69, 1992.

T. Warren, S. Gleason, R. Botstwick, and E. Et-verbeek, Ultraviolet Light and Fluorescent Minerals: Understanding, Collecting and Displaying Fluorescent Minerals (Rocks, Minerals and Gemstones) Gem Guides Book Company, p.209, 1999.

V. Wegan and B. Et-brûlé, The structure of polymer modified binders and corresponding asphalt mixtures, 1999.

V. Wegan and K. Et-eriksen, Optical methods for the evaluation of aspalt concrete and polymermodified bitumen, Danish Road Institue, 1993.

V. Wegan and C. Et-nielsen, Microsctrure of polymer modified binders in bituminous mixtures, 2001.

D. Whiteoak and J. Et-read, Shell bitumen handbook 5th Edition, p.464, 2003.

S. Wu, J. Qiu, L. Mo, J. Yu, Y. Zhang et al., Investigation of temperature characteristics of recycled hot mix asphalt mixtures, Resources, Conservation and Recycling, pp.610-620, 2007.
DOI : 10.1016/j.resconrec.2006.11.005

L. Xinjun, M. Marasteanu, R. Williams, and T. Et-clyne, Effect of RAP (Proportion and Type) and Binder Grade on the Properties of Asphalt Mixtures, 87th Annual Meeting of the Transportation Research Board, pp.92-97, 2008.

S. Yoon, S. D. Bhatt, W. Lee, H. Y. Lee, S. Y. Jeong et al., Separation and characterization of bitumen from Athabasca oil sand, Korean Journal of Chemical Engineering, vol.87, issue.1, pp.64-71, 2009.
DOI : 10.1007/s11814-009-0011-3

L. Zearley, Pénétration characteristics of asphalt in a recycled mixture Highway division - Office of materials -IOWA DOT, p.17, 1979.

F. Zhou, G. Das, and T. Et-sculliuon, Rap stockpile management and processing in Texas: State of the practice and proposed guidelines, 2010.

. Le-repère-Étant-sur-la-ligne, Les masses relevées lors de l'étape 2 permettent de connaître la masse d'AE 0/4 existant à mettre sur le tas de la colonne C0/4, la masse d'AE 4/6 existant à mettre sur le tas de la colonne C4/6 et la masse d'AE 6/10 existant à mettre sur le tas de la colonne C6/10, Les masses indiquées sur la feuille de pesée pour chaque fraction d'AE sont pesées et disposées dans les tas correspondant de la ligne en cours de remplissage. Le repère de ligne est ensuite déplacé sur la ligne suivante

. Le, Le second tour débute en recommençant à l'étape 1 et en continuant le transfert du repère de ligne de L1 vers L2 puis de L2 vers L3 puis de L3 vers L1 et ainsi de suite jusqu'à la fin des contenants BB1, BB2, BB3 et BB4.. Fin du criblage Protocole de remplissage Nous disposons ainsi pour chaque fraction de 3 tas provenant des big bags 1