_. Références, ]. J. Aga-96, and . Agassant, La mise en forme des matières plastiques, Lavoisier Tech. & Doc., 3 ème édition Multiphase flow in a porous media, lecture note in engineering Breakage probability of irregularly shaped particles, ASH 81] M. F. ASHBY, Matériaux, Dunod, coll. « Sciences Sup, p.1507, 1981.

M. Astruc, Etude rhéo-optique de la morphologie de mélanges concentrés de polymères immiscibles et de polymères chargés en noir de carbone, Thèse de Doctorat de sciences et génie des matériaux, 2001.

M. Astruc, V. Collin, S. Rusch, P. Navard, and E. Peuvrel-disdier, Infiltration of uncured elastomers into silica agglomerates, Journal of Applied Polymer Science, vol.27, issue.5, pp.3292-3300, 2004.
DOI : 10.1002/app.13523

URL : https://hal.archives-ouvertes.fr/hal-00531559

D. F. Bagster and D. Tomi, The stresses within a sphere in simple flow fields, Chemical Engineering Science, vol.29, issue.8, pp.1773-1783, 1974.
DOI : 10.1016/0009-2509(74)87036-3

G. K. Batchelor and J. T. Green, The hydrodynamic interaction of two small freely-moving spheres in a linear flow field, Journal of Fluid Mechanics, vol.41, issue.02, pp.375-400, 1972.
DOI : 10.1007/BF01976444

V. Becker and H. Briesen, A master curve for the onset of shear induced restructuring of fractal colloidal aggregates, Journal of Colloid and Interface Science, vol.346, issue.1, pp.32-36, 2010.
DOI : 10.1016/j.jcis.2010.02.015

J. Berriot, F. Lequeux, L. Monnerie, H. Montes, and D. Long, Filler-elastomer interaction in model filled rubbers, a H NMR study, J. Non-Crist, pp.719-724, 2002.

J. Bikard, P. Menard, E. Peuvrel-disdier, and T. Budtova, 3D numerical simulation of the behaviour of a spherical particle suspended in a Newtonian fluid and submitted to a simple shear, Computational Materials Science, vol.37, issue.4, pp.517-525, 2006.
DOI : 10.1016/j.commatsci.2005.12.003

URL : https://hal.archives-ouvertes.fr/hal-00574190

F. Bohin, D. L. Feke, and I. Manas-zloczower, Penetration of Silicone Polymers into Silica Agglomerates and Its Influence on Dispersion Mechanism, Rubber Chemistry and Technology, vol.67, issue.4, pp.602-609, 1994.
DOI : 10.5254/1.3538695

F. Bohin, I. Manas-zloczower, and D. L. Feke, Kinetics of dispersion for sparse agglomerates in simple shear flows: Application to silica agglomerates in silicone polymers, Chemical Engineering Science, vol.51, issue.23, pp.5193-5204, 1996.
DOI : 10.1016/S0009-2509(96)00338-7

V. L. Bokobza, L. Gaulliard, and . Ladouce, Silica reinforcement of styrenebutadiene rubbers, 2001.

L. Bokobza and J. P. Chauvin, Reinforcement of natural rubber: use of in situ generated silicas and nanofibres of sepiolite, Polymer, vol.46, issue.12, pp.4144-4151, 2005.
DOI : 10.1016/j.polymer.2005.02.048

W. R. Bolen and R. E. Colwell, Intensive mixing, Soc. Plast. Eng. J, vol.14, issue.8, pp.24-28, 1958.

_. Y. Bomal, P. Cochet, B. Dejean, P. Fourre, and D. Labarre, Une silice de nouvelle génération pour pneumatiques, L'actualité chimique, pp.42-48, 1996.

B. B. Boonstra and A. I. Medalia, Effect of Carbon Black Dispersion on the Mechanical Properties of Rubber Vulcanizates, Rubber Chemistry and Technology, vol.36, issue.1, p.115, 1963.
DOI : 10.5254/1.3539530

C. I. Boudimbou, V. Roux, C. Collin, P. Peiti, E. Navard et al., Ecoulement dans une géométrie plan-plan confiné: validité de la géométrie pour l'étude de fluides visco-élastiques et application à la dispersion du noir de carbone, Revue Rhéologie, pp.33-40, 2011.

A. G. Boukellal, R. Durin, J. Valette, and . Agassant, Evaluation of a tube-based constitutive equation using conventional and planar elongation flow optical rheometers, accepted [BOW 86] S. BOWERS, Development of inelastic models for the injection moulding process, pp.23-38, 1986.
DOI : 10.1007/s00397-011-0573-y

URL : https://hal.archives-ouvertes.fr/hal-00612051

J. Boyle, I. Manas-zloczower, D. J. Feke, I. Boyle, D. L. Manas-zloczower et al., Influence of Particle Morphology and Flow Conditions on the Dispersion Behavior of Fumed Silica in Silicone Polymers, PPS 17, Annual Meeting, pp.205-212, 2001.
DOI : 10.1002/ppsc.200400874

N. Brielles, F. Chantraine, M. Viana, D. Chulia, P. Branlard et al., Imbibition and Dissolution of a Porous Medium, Industrial & Engineering Chemistry Research, vol.46, issue.17, pp.5785-5793, 2007.
DOI : 10.1021/ie0701569

URL : https://hal.archives-ouvertes.fr/hal-00176746

B. Cantaloube, Mélanger un élastomère et une charge dans un mélangeur interne : description, cinétiques et problèmes rencontrés, 4 ème journée franco-allemande du caoutchouc, pp.15-16, 1996.

P. J. Carreau, Rheological Equations from Molecular Network Theories, Transactions of the Society of Rheology, vol.16, issue.1, pp.99-127, 1972.
DOI : 10.1122/1.549276

B. Castel, Mise en forme des solides, Techniques de l'ingénieur, p.3380, 1995.

M. Caude, Méthodes chromatographiques, Techniques de l'ingénieurs, réference P, p.1445, 1996.

J. Chatelet, Systèmes optroniques semi-actifs, Techniques de l'ingénieur, p.4410, 1996.

Y. Chevallier, Silices amorphes synthétiques, Techniques de l'ingénieur, p.6020, 1990.

Y. Chevallier, Composition de caoutchouc à base de silice destinés à la fabrication d'enveloppe de pneumatiques routiers ayant une résistance au roulement améliorée, 1998.

O. Y. Chun, Etude des interactions à l'interface silice-caoutchouc, Thèse de Doctorat, 1994.

V. Collin, Etude rhéo-optique des mécanismes de dispersion du noir de carbone dans des élastomères, Thèse Doctorat Sciences et des Génie Matériaux, 2004.

V. Collin and E. Peuvrel-disdier, Dispersion mechanisms of carbon black in an elastomer matrix, Elastomery, vol.9, pp.9-15, 2005.
URL : https://hal.archives-ouvertes.fr/hal-00663087

V. Collin, I. Boudimbou, and E. Peuvrel-disdier, New insights in dispersion mechanisms of carbon black in a polymer matrix under shear by rheo-optics, Journal of Applied Polymer Science, vol.29, issue.3
DOI : 10.1002/app.37769

URL : https://hal.archives-ouvertes.fr/hal-00700482

G. R. Cotton, Mixing of Carbon Black with Rubber I. Measurement of Dispersion Rate by Changes in Mixing Torque, Rubber Chemistry and Technology, vol.57, issue.1, pp.118-133, 1984.
DOI : 10.5254/1.3535988

W. P. Cox and E. H. Merz, Correlation of dynamic and steady flow viscosities, Journal of Polymer Science, vol.28, issue.118, pp.619-622, 1958.
DOI : 10.1002/pol.1958.1202811812

M. M. Cross, Rheology of non-Newtonian fluids: A new flow equation for pseudoplastic systems, Journal of Colloid Science, vol.20, issue.5, pp.417-437, 1965.
DOI : 10.1016/0095-8522(65)90022-X

E. S. Dizon, Processing in an Internal Mixer as Affected by Carbon Black Properties, Rubber Chemistry and Technology, vol.49, issue.1, p.8512, 1976.
DOI : 10.5254/1.3534941

]. M. Doi-86, S. F. Doi, and . Edwards, The theory of polymer dynamics, Oxford Sciences publications, 1986.

O. T. Dumas, . Bonnefoy, ]. T. Communication-personnelledum-11b, O. Dumas, P. Bonnefoy et al., New methods to analyse fragmentation mechanisms of precipitated silicas
URL : https://hal.archives-ouvertes.fr/hal-00616514

J. C. Elster and . Honerkamp, Modified maximum entropy method and its application to creep data, Macromolecules, vol.24, issue.1, pp.310-314, 1991.
DOI : 10.1021/ma00001a047

L. Erwin, Theory of laminar mixing, Polymer Engineering and Science, vol.49, issue.13, pp.1044-1049, 1978.
DOI : 10.1002/pen.760181312

D. L. Feke, Shear-induced dispersion of particle agglomerates, Handbook of Powder Technology, pp.815-852, 2007.

J. M. Fleureau, Cours de mise en forme des sols et matériaux granulaires, 2010.

J. Fröhlich and H. D. Luginsland, RPA-Studies into the silica/silane system, in Rubber World, p.28, 2001.

C. Gatumel, Analyse granulométrique : caractérisation de la taille et de la forme des particules, cours sur les Sciences et la Technologie des poudres, 2007.

. Gop-05-]-p, . I. Gopalkrihman, L. Manas-zloczower, and . Feke, Investigating dispersion mechanisms in partially infiltrated agglomerates : Interstitial fluid effects, Powder Technology, vol.156, pp.111-119, 2005.

R. A. Greekorn, Y. Guy, L. Bomal, and . Ladouce-stelandre, Flow phenomena in porous media, Marcel Dekker Elastomers reinforcement by precipitated silicas, Ph. COCHET, vol.58, pp.43-49, 1983.

L. Guy, S. Daudey, P. H. Cochet, and Y. Bomal, New insights in the dynamical properties of precipitated silica filled rubber using a new high surface silica, 2008.

S. Harada, R. Tanaka, H. Nogami, and M. Sawada, Dependence of fragmentation behavior of colloidal aggregates on their fractal structure, Journal of Colloid and Interface Science, vol.301, issue.1, pp.123-129, 2006.
DOI : 10.1016/j.jcis.2006.04.051

J. Honerkamp and J. Weese, A nonlinear regularization method for the calculation of relaxation spectra, Rheologica Acta, vol.22, issue.6, pp.65-73, 1993.
DOI : 10.1007/BF00396678

]. S. Hor-92a, I. Horwatt, D. L. Manas-zloczower, and . Feke, Dispersion behavior of heterogeneous agglomerates at supercritical stresses, Chem. Eng. Sci, vol.47, pp.1849-1855, 1992.

]. S. Hor-92b, D. L. Horwatt, I. Feke, . Manas, and . Zloczower, The influence of structural heterogeneities on cohesivity and breakup of agglomerates in simple shear flow, Powder technology, vol.72, pp.113-119, 1992.

. K. Ile-79-]-r and . Iler, The chemistry of silica, 1979.

A. I. Isayev and M. Wan, Injection Molding of a Natural Rubber Compound: Simulation and Experimental Studies, Rubber Chemistry and Technology, vol.71, issue.5, pp.1060-1072, 1997.
DOI : 10.5254/1.3538510

J. Jas, Procédé pour améliorer les propriétés rhéologiques d'une suspension silice précipitée, Demandeur de brevet : Rhone-Poulenc Chimie de base, INPI, pp.536-380, 1982.

G. B. Jeffery, The Motion of Ellipsoidal Particles Immersed in a Viscous Fluid, Proc. Roy Soc, pp.161-178, 1922.
DOI : 10.1098/rspa.1922.0078

M. Johnson and D. Segalman, A model for viscoelastic fluid behavior which allows non-affine deformation, Journal of Non-Newtonian Fluid Mechanics, vol.2, issue.3, pp.255-270, 1977.
DOI : 10.1016/0377-0257(77)80003-7

Y. P. Khanna, Dynamic melt rheology. I: Re-examining dynamic viscosity in relationship to the steady shear flow viscosity, Polymer Engineering and Science, vol.28, issue.6, pp.440-444, 1991.
DOI : 10.1002/pen.760310610

D. W. Krevelen, Properties of polymers, 1990.

. M. Kri-59-]-i, T. J. Krieger, and . Dougherty, A mechanism for non-Newtonian flow in suspensions of rigid spheres, Trans. Soc. Rheol, vol.20, pp.137-152, 1959.

A. Lapra, Caractérisation moléculaire et propriétés mécaniques des réseaux élastomères SBR renforcés par la silice, Thèse de Doctorat Chimie Physico-chimie Polymères, 1999.

. R. Larson, Constitutive Equations for Polymer Melts and Solutions, Butterworths, vol.5, 1988.

_. Références, . M. Lau-78-]-h, and . Laun, Descriptions of the non-linear shear behaviour of a low-density polyethylene melt by means of an experimentally determined strain dependent memory function, Rheo. Acta, vol.17, pp.1-15, 1978.

J. Leblanc, R. Des-Élastomères-et-leur-mise-en-forme, N. Y. Artel, I. Lee, . Y. Manas-zloczower et al., Dispersion of titanium dioxyde agglomerates in viscous media Analysis of titanium dioxide agglomerate dispersion in linear low density polyethylene and resulting propreties of coumpounds The surface properties of silicas, Hydroxyles des silices divisées, pp.3363-3372, 1990.

P. Levresse, I. Manas-zloczower, D. L. Feke, I. Li, D. L. Manas-zloczower et al., Dispersion Studies of Agglomerates in Steady and Dynamic Flows of Polymeric Materials, Rubber Chemistry and Technology, vol.75, issue.1, pp.119-132, 1995.
DOI : 10.5254/1.3547664

]. Q. Li-97, I. Li, and . Manas-zloczower, Comparison of stability and dispersion characteristics of organic pigment agglomerates, Powder Technology, vol.92, issue.1, pp.17-24, 1997.
DOI : 10.1016/S0032-5910(97)03210-5

D. Lorin-de-la and G. , Contribution à l'étude du comportement des milieux pulvérulents "micro-rhéologie et état statistique des milieux granulaires, Thèse de Doctorat, Ecole nationale des Ponts et Chaussées, 1980.

I. Manas-zaloczower and D. L. Feke, Analysis of Agglomerate Separation in Linear Flow Fields, Ini, Polymer Process. II, p.185, 1989.

G. Marrucci and N. Grizzuti, Fast flows of concentrated polymers: Predictions of the tube model on chain stretching, Gazz. Chim. It, vol.118, 1988.

T. C. Mc, L. , and R. G. Larson, Molecular constitutive equations for a class of branched polymers. The pom-pom polymer, J. Rheol, vol.42, pp.85-101, 1998.

B. Meissner, Molecular Mechanisms of Failure in Polymer Nanocomposites, J. Polym. Sci, vol.18, p.2483, 1974.

M. Mezhericher and A. Levy, Modelling of particle breakage during drying, Chemical Engineering and Processing: Process Intensification, vol.47, issue.8, pp.1404-1411, 2008.
DOI : 10.1016/j.cep.2007.06.018

B. K. Mishra and C. Thornton, Impact breakage of particle agglomerates, International Journal of Mineral Processing, vol.61, issue.4, pp.225-239, 2001.
DOI : 10.1016/S0301-7516(00)00065-X

N. Nakajima, Knwledge gap in characterization of reinforcing fillers, structureprocessability relation of agglomerates, Analyse des mécanismes de dispersion élémentaires et globaux de charges minérales dans des polymères :influence de la rhéologie et de la structure de la matrice

P. D. Olmsted, O. Radulescu, and C. Y. Lu, Johnson???Segalman model with a diffusion term in cylindrical Couette flow, Journal of Rheology, vol.44, issue.2, pp.10-1122, 2000.
DOI : 10.1122/1.551085

A. Öztekin and R. A. Brown, Instability of a viscoelastic fluid between rotating parallel disks: analysis for the Oldroyd-B fluid, Journal of Fluid Mechanics, vol.235, issue.-1, pp.473-502, 1993.
DOI : 10.1122/1.550148

P. Tien and R. I. Tanner, A new constitutive equation derived from network theory, Journal of Non-Newtonian Fluid Mechanics, vol.2, issue.4, p.353, 1977.
DOI : 10.1016/0377-0257(77)80021-9

E. P. Plueddeman, Silane coupling agent, 1991.

I. C. Pomchaitaward, D. L. Manas-zloczower, and . Feke, Lattice Boltzmann simulation of capillary infiltration in agglomerates and beds of fine particles, Advanced Powder Technology, vol.14, issue.3, pp.295-311, 2003.
DOI : 10.1163/15685520360685956

I. C. Pomchaitaward, D. L. Manas-zloczower, and . Feke, Investigation of the dispersion of carbon black agglomerates of various sizes in simple-shear flows, Chemical Engineering Science, vol.58, issue.9
DOI : 10.1016/S0009-2509(03)00012-5

R. L. Powell and S. G. Mason, Dispersion by laminar flow, AIChE Journal, vol.28, issue.2, p.286, 1982.
DOI : 10.1002/aic.690280218

S. Ravindranath and S. Q. Wang, Steady state measurements in stress plateau region of entangled polymer solutions: Controlled-rate and controlled-stress modes, Journal of Rheology, vol.52, issue.4, pp.957-980, 2008.
DOI : 10.1122/1.2936869

F. Rouquerol, Texture des matériaux pulvérulent ou poreux, Techniques de l'ingénieur, référence P, p.1050, 1996.

C. Roux, Etude rhéo-optique des mécanismes de dispersion de la silice dans des élastomères, Thèse Doctorat Science et Génie des Matériaux, 2008.

S. P. Rwei, D. L. Feke, and I. Manas-zloczower, Observation of carbon black agglomerate dispersion in simple shear flows, Polymer Engineering and Science, vol.31, issue.1, pp.701-706, 1990.
DOI : 10.1002/pen.760301202

D. S. Rwei, I. Feke, and . Manas-zloczower, Characterization of agglomerate dispersion by erosion in simple shear flows, Polymer Engineering and Science, vol.253, issue.8, pp.558-562, 1991.
DOI : 10.1002/pen.760310804

I. S. Rwei and . Manas-zloczower, Observation of carbon black agglomerate dispersion in simple shear flow, Intern. Polym. Processing VI, issue.2, pp.98-102, 1991.

K. Saleh and P. Guigon, Mise en oeuvre des poudres -Techniques de granulation humide et liants, Techniques de l'Ingénieur, 2009.

]. A. Sam-05, A. Samimi, A. Hassanpour, and . Ghadiri, Single and bulk compressions of soft granules : Experimental study and DEM evaluation, Chem. Eng. Sci., P, vol.3997, 2005.

A. Scurati, D. L. Feke, and I. Manas-zloczower, Model and analysis of kinetics erosion in simple shear flows, pp.28-29, 2002.

A. Scurati, D. L. Feke, and I. Manas-zloczower, Analysis of the kinetics of agglomerate erosion in simple shear flows, Chemical Engineering Science, vol.60, issue.23, pp.6564-6573, 2005.
DOI : 10.1016/j.ces.2005.05.059

O. Seyvet, Etude rhéooptique de l'imprégnation et de la dispersion d'agglomérats de silice en suspension dans des polymères, 1999.

S. Shiga and M. Furuta, Processability of EPR in an internal mixer. II. Morphological changes of carbon black agglomerates during mixing, Rubber Chem. Technol, vol.58, pp.1-22, 1985.

F. Snijkers, G. D. Avino, P. L. Maffetone, F. Greco, M. Hulsen et al., Rotation of a sphere in a viscoelastic liquid subjected to shear flow. Part II. Experimental results, Journal of Rheology, vol.53, issue.2, pp.459-480, 2009.
DOI : 10.1122/1.3073052

M. Snick, The behaviour of a solid body suspended in a viscoelastic fluid, 2011.

R. C. Sonntag and W. B. Russel, Structure and breakup of flocs subjected to fluid stresses, Journal of Colloid and Interface Science, vol.115, issue.2, pp.378-389, 1987.
DOI : 10.1016/0021-9797(87)90053-1

F. Soulie, M. S. El-youssoufi, J. Y. Delenne, C. Voivret, and C. Saix, Effect of the crystallization of a solute on the cohesion in granular materials, Powder Technology, vol.175, issue.1, pp.43-47, 2007.
DOI : 10.1016/j.powtec.2007.01.025

URL : https://hal.archives-ouvertes.fr/hal-00562421

T. L. Staples and D. G. Shaffer, Wicking flow in irregular capillaries, Colloids and Surfaces, A: Physichochemical and Engineering Aspects, pp.239-250, 2002.

R. C. Stonnatag and W. B. Russel, Structure and breakup of flocs subjected to fluid stresses. II. Theory, J. Colloid Interface Sci, vol.26, p.2071, 1987.

]. C. Thornton, M. T. Ciomocos, and M. J. Adamas, Numerical simulations of agglomerate impact breakage, Powder Technology, vol.105, issue.1-3, pp.74-82, 1999.
DOI : 10.1016/S0032-5910(99)00120-5

C. Thornton and L. Liu, How do agglomerates break?, Powder Technol, pp.143-144, 2004.

N. Tokita and I. Pliskin, The Dependence of Processability on Molecular Weight Distribution of Elastomers, Rubber Chemistry and Technology, vol.46, issue.5, 1973.
DOI : 10.5254/1.3547426

. D. Vas-07-]-n, D. Vassileva, F. Van-den-ende, J. Mugele, and . Mellema, Fragmentation and erosion of two-dimensional aggregates in shear flow, Langmuir, vol.23, pp.2352-2361, 2007.

S. Venkatraman, M. Okano, and A. Nixon, A comparison of torsional and capillary rheometry for polymer melts: The Cox-Merz rule revisited, Polymer Engineering and Science, vol.12, issue.5, pp.308-313, 1990.
DOI : 10.1002/pen.760300508

F. Vincent, J. Majeste, and C. , CARROT, Mechanisms of dispersion in silica filled elastomers, PPS, 2010.

F. Vincent, J. C. Majeste, E. Communication-personnelle, C. Washburn, M. Weiler et al., The dynamics of capillary flows New model describing the total dispersion of dry powder agglomerates, Physical Review Powder Technol, vol.17, issue.203, pp.273-283, 1921.

T. W. De and W. , A Rheological Equation of State which Predicts Non-Newtonian Viscosity. Normal Stresses and Dynamic Moduli, J. Appl. Phys, p.26889, 1955.

S. Wu, Polymer Interface and Adhesion, Marcel Dekker, 1982.

H. Yamada, I. Manas-zloczower, and D. L. Feke, The Influence of Matrix Viscosity and Interfacial Properties on the Dispersion Kinetics of Carbon Black Agglomerates, Rubber Chemistry and Technology, vol.71, issue.1, pp.163-169, 1997.
DOI : 10.5254/1.3538468

H. Yamada, I. Manas-zloczower, and D. L. Feke, The Influence of Matrix Viscosity and Interfacial Properties on the Dispersion Kinetics of Carbon Black Agglomerates, Rubber Chemistry and Technology, vol.71, issue.1, pp.1-16, 1998.
DOI : 10.5254/1.3538468

W. B. Young, Analysis of capillary flows in non-uniform cross-sectional capillaries, Colloid Surface A, pp.123-128, 2004.

X. Yuan, Dynamics of a mechanical interface in shear-banded flow, Europhysics Letters (EPL), vol.46, issue.4, pp.542-548, 1999.
DOI : 10.1209/epl/i1999-00299-3

J. F. Zaragoci, Modélisation du comportement d'une particule solide placée dans une matrice newtonienne ou viscoélastique au cours d'un écoulement de cisaillement simple, 2007.