83 3, 100 3.9 ILLUSTRATION, p.105 ,
From Data to Wisdom, Journal of Applied Systems Analysis, vol.16, pp.3-9, 1989. ,
Modelling component cost in compression moulding of thermoplastic composite and sandwich components, Composites Part A: Applied Science and Manufacturing, vol.31, issue.4, pp.319-333, 2000. ,
DOI : 10.1016/S1359-835X(99)00079-2
Computer Aided Process Planning: the state-of-the-art survey, International Journal of Production Research, vol.36, issue.1, pp.553-585, 1989. ,
DOI : 10.1080/00207548908942569
Génération automatique de gammes de tournage et contribution à la gestion d'une cellule de production, Mémoire d'habilitation à diriger des recherché, 1994. ,
Recurring Cost Minimization of Composite Laminated Structures ??? Optimum Part Size as a Function of Learning Curve Effects and Assembly, Journal of Composite Materials, vol.36, issue.4, pp.501-518, 2002. ,
DOI : 10.1177/0021998302036004556
Sélection des matériaux et des procédés de mise en oeuvre, Presses polytechniques et universitaires romandes, 2001. ,
Cost driver optimization in activity-based costing, The Accounting Review, pp.563-575, 1993. ,
La compétitivité par la maitrise des coûts, AFNOR, 1991. ,
Physique du moulage des composites avancés : aspects théoriques ,
Cure shrinkage defects in epoxy resins, Polymer, pp.2013-2017, 1995. ,
Les composites en aérospatiale, Techniques de l'ingénieur, traité Plastiques et Composites, AM 5645 An ABC manager's primer: Straight talk on activity-based costing, Institute of Management Accountants, 1993. ,
Monitoring of resin flow in the resin transfer molding (RTM) process using point-voltage sensors, Composites Science and Technology, vol.67, issue.3-4, pp.367-379, 2007. ,
DOI : 10.1016/j.compscitech.2006.09.011
Information modeling for variation management during the product and manufacturing process design, International Journal on Interactive Design and Manufacturing (IJIDeM), vol.57, issue.5, pp.107-118, 2008. ,
DOI : 10.1007/s12008-008-0040-x
GARI: A problem solver that plans how to machine mechanical parts, Proceedings of the 7 th International Joint Conference on AI, 1981. ,
GAGMAT: un système de génération automatique de gammes d'usinage intégré dans une chaîne complète de CFAO, dans La gamme automatique en usinage, 1990. ,
Estimation des coûts en production mécanique, Techniques de l'Ingénieur, 1999. ,
A decision support system for advanced composites manufacturing cost estimation, 1998. ,
La gestion des connaissances, 2003. ,
URL : https://hal.archives-ouvertes.fr/hal-00997696
An improved approach for automatic process plan generation of complex borings, Computers in Industry, vol.57, issue.7, pp.663-675, 2006. ,
DOI : 10.1016/j.compind.2006.03.002
URL : https://hal.archives-ouvertes.fr/hal-01022739
Intégration Produit/Process par les concepts d'activités et de caractéristiques clés ? application à l'optimisation de l'allocation des tolérances géométriques, Thèse Arts et Métiers ParisTech et Université Paul Verlaine, pp.15-2007 ,
Modélisation des contraintes de fabrication en conception (DFM), chapitre dans l'ouvrage : Conception de produits mécaniques : méthodes, modèles et outils, sous la diréction de : Michel Tollenaere, 1998. ,
La conception : satisfaction des spécifications vs conduite des activités humaines, 17 ème Congrès Français de Mécanique, 2005. ,
Activity-based costing/management and its implications for operations management, Technovation, vol.23, issue.2, pp.131-138, 2003. ,
DOI : 10.1016/S0166-4972(01)00093-1
Une approche multi-modèles pour la capitalisation des connaissances dans le domaine de la conception, Thèse de l'Institut National Polytechnique de Grenoble, 1997. ,
In-plane Radial Fluid Flow Characterisation of Fibrous Materials, Journal of Thermal Insulation, vol.10, pp.153-173, 1987. ,
Aspects of the Compaction of Composite Angle Laminates: An Experimental Investigation, Journal of Composite Materials, vol.35, issue.1, 2001. ,
DOI : 10.1177/002199801772661849
In defense of activity-based cost-management, Management Accounting, vol.74, issue.5, pp.58-63, 1992. ,
Systèmes experts ? un nouvel outil d'aide à la décision, 1993. ,
Exploring equivalence of information from dielectric and calorimetric measurements of thermoset cure?a model for the relationship between curing temperature, degree of cure and electrical impedance, Polymer Decision with multiple objectives : preferences and value tradeoffs, pp.5868-5878, 1976. ,
Fiber reinforcement, 1964. ,
Proposition d'un modèle conceptuel unifié pour la gestion dynamique des connaissances d'entreprise, Thèse de l'Ecole Centrale de Nantes et de l, 2004. ,
Knowledge Lifecycle Model, Methods and Tools for Effective Knowledge Life- Cycle-Management, pp.285-305, 2008. ,
Modeling the impact of capillary pressure and air entrapment on fiber tow saturation during resin infusion in LCM, Composites Part A: Applied Science and Manufacturing, vol.40, issue.8, pp.1053-1064, 2009. ,
DOI : 10.1016/j.compositesa.2009.04.013
Heat of Reaction, Degree of Cure, and Viscosity of Hercules 3501-6 Resin, Journal of Composite Materials, vol.19, issue.6, pp.510-520, 1982. ,
DOI : 10.1177/002199838201600605
Virtual manufacturing: prediction of work piece geometric quality by considering machine and set-up accuracy, International Journal of Computer Integrated Manufacturing, vol.54, issue.7, pp.610-626, 2011. ,
DOI : 10.1016/S1526-6125(00)70121-6
URL : https://hal.archives-ouvertes.fr/hal-00704667
Information Integration for Concurrent Engineering (IICE) IDEF3 Process Description Capture Method Report, Interim Technical Report for Period, 1991. ,
Composites manufacturing : materials, product and process engineering, 2002. ,
DOI : 10.1201/9781420041989
Infiltration processing of fibre reinforced composites: governing phenomena, Composites Part A: Applied Science and Manufacturing, vol.32, issue.8, pp.981-996, 2001. ,
DOI : 10.1016/S1359-835X(01)00015-X
Identification of relevant indicators for preforming process selection, 2009. ,
Application of Discrete Event Simulation to the Design of a Composite Manufacturing Facility ,
Computer-Aided Group Technology Integrated System, CIRP Annals - Manufacturing Technology, vol.37, issue.1, pp.425-428, 1988. ,
DOI : 10.1016/S0007-8506(07)61669-2
A la recherche du temps à gagner, pourquoi la technologie de groupe ?, chapitre dans l'ouvrage : La gamme automatique en usinage, recueil de textes du séminaire GAMA réunis par Bourdet P, et Villeneuve F., Editions Hermes, 1990. ,
The PPO design model with respect to digital enterprise technologies among product life cycle, International Journal of Computer Integrated Manufacturing, vol.14, issue.2, pp.139-145, 2008. ,
DOI : 10.1016/S0007-8506(07)62178-7
The Knowledge-Creating Company, 1995. ,
DOI : 10.1016/B978-0-7506-7009-8.50016-1
Contribution à l'intégration des activités collaboratives et métier en conception de produit, Mémoire d'Habilitation à Diriger des Recherches, 2007. ,
Classement et choix en présence de points de vue multiples, Revue française d'automatique, d'informatique et de recherche opérationnelle, Recherche opérationnelle, p.pp, 1968. ,
DOI : 10.1051/ro/196802v100571
Drapability of dry textile fabrics for stampable thermoplastic preforms, Composites Part A: Applied Science and Manufacturing, vol.31, issue.11, pp.1167-1177, 2000. ,
DOI : 10.1016/S1359-835X(00)00100-7
Liquid moulding technologies. Resin transfer moulding, structural reaction injection moulding and related processing techniques, 1997. ,
DOI : 10.1533/9781845695446