.. La-trajectoire-mesurée-2, Sans et avec correction des défauts de l'axe, p.97

.. Différents-tests-de-broutage-sur-notre-robot, J. Abele, M. Bauer, O. V. Pischan, M. Stryk et al., Prediction of the tool displacement for robot milling applications using co-simulation of an industrial robot and a removal process, CIRP 2nd International Conference Process Machine Interactions. CIRP, 2010.

S. E. Abele, S. Bauer, M. Rothenbucher, O. Stelzer, and . Stryk, Prediction of the tool displacement by coupled models of the compliant industrial robot and the milling process, Proceedings of the International Conference on Process Machine Interactions, pp.223-230, 2008.

P. Auquiert, O. Gibaru, and E. Nyiri, and -continuous polynomial parametric splines, Computer Aided Geometric Design, vol.24, issue.7, pp.373-394, 2007.
DOI : 10.1016/j.cagd.2007.04.007

P. Auquiert, O. Gibaru, and E. Nyiri, On the cubic L 1 spline interpolant to the Heaviside function, Numerical Algorithms, vol.87, issue.2, pp.321-332, 2007.
DOI : 10.1007/s11075-007-9140-0

E. Abele, S. Rothenbücher, and M. Weigold, Cartesian compliance model for industrial robots using virtual joints, Production Engineering, vol.15, issue.3, pp.339-343, 2008.
DOI : 10.1007/s11740-008-0118-0

G. Alici and B. Shirinzadeh, Enhanced stiffness modeling, identification and characterization for robot manipulators, IEEE Transactions on Robotics, vol.21, issue.4, pp.554-564, 2005.
DOI : 10.1109/TRO.2004.842347
URL : http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.466.3203

E. Abele, M. Weigold, and S. Rothenbücher, Modeling and Identification of an Industrial Robot for Machining Applications, CIRP Annals - Manufacturing Technology, vol.56, issue.1, pp.387-390, 2007.
DOI : 10.1016/j.cirp.2007.05.090

]. C. Bar95 and . Bard, Modélisation du comportement dynamique des transmissions par engrenages, Thèse de doctorat. Institut National des Sciences Appliquées de Lyon, 1995.

R. Bearee, P. J. Barre, and S. Bloch, Influence of High-Speed Machine Tool Control Parameters on the Contouring Accuracy. Application to Linear and Circular Interpolation, Journal of Intelligent and Robotic Systems, vol.40, issue.3, pp.321-342, 2004.
DOI : 10.1023/B:JINT.0000039013.70093.29

P. J. Barre, R. Bearee, P. Borne, and E. Dumetz, Influence of a Jerk Controlled Movement Law on the Vibratory Behaviour of High-Dynamics Systems, Journal of Intelligent and Robotic Systems, vol.188, issue.6, pp.275-293, 2005.
DOI : 10.1007/s10846-004-4002-7

]. R. Bea05 and . Bearée, Prise en compte des phenomenes vibratoires dans la generation de commande des machines outils a dynamique elevée, Thèse de doctorat. Ecole nationale supérieure d'arts et métiers, 2005.

J. Chen and L. M. Chao, Positioning error analysis for robot manipulators with all rotary joints, Proceedings. 1986 IEEE International Conference on Robotics and Automation, pp.1011-1016, 1986.
DOI : 10.1109/ROBOT.1986.1087544

J. Craig, Introuduction to robotics, Mechanics And Control, 1989.

M. Damak, Théorie et instrumentation pour l'´ etalonnage statique des robots : Vers une programmation hors-ligne industriellement efficase, Thèse de doctorat. Ecole nationale supérieure d'arts et métiers, 1996.

M. Damak, M. Douss, J. M. David, and T. Coorevits, Analyse physique et identification analytique directe des défauts de robots industriels, Journal Européen des Systèmes Automatisés, issue.8, pp.311359-1384, 1997.

]. D. Deb06 and . Deblaise, ContributionàContributionà la modélisation etàetà l'´ etalonnagé elasto-géométriques des manipulateursàmanipulateursà structureparalì ele, Thèse de doctorat. Institut National des Sciences Appliquées de Rennes, 2006.

J. Dong, P. M. Ferreira, and J. A. Stori, Feed-rate optimization with jerk constraints for generating minimum-time trajectories, International Journal of Machine Tools and Manufacture, vol.47, issue.12-13, pp.12-131941, 2007.
DOI : 10.1016/j.ijmachtools.2007.03.006

M. Damak, P. Grosbois, and . Smet, Vision robot based absolute accuracy measurement, calibration and uncertainty, The 35th International Symposium on Robotics, 2004.

K. Erkorkmaz and Y. Altintas, High speed CNC system design. Part I: jerk limited trajectory generation and quintic spline interpolation, International Journal of Machine Tools and Manufacture, vol.41, issue.9, pp.1323-1345, 2001.
DOI : 10.1016/S0890-6955(01)00002-5

A. Elatta, P. G. Li, L. Z. Fan, D. Yu, and F. Luo, An overview of robot calibration, Information Technology Journal, vol.3, issue.1, pp.74-78, 2004.

]. A. Gas98 and . Gasparetto, A system theory approach to mode coupling chatter in machining, Journal of Dynamic Systems, Measurement and Control, Transactions of the ASME, vol.120, issue.4, pp.545-547, 1998.

F. H. Ghorbel, P. S. Gandhi, and F. Alpeter, On the Kinematic Error in Harmonic Drive Gears, Journal of Mechanical Design, vol.123, issue.1, pp.90-97, 2001.
DOI : 10.1115/1.1334379

C. Gong, J. Yuan, and J. Ni, Nongeometric error identification and compensation for robotic system by inverse calibration, International Journal of Machine Tools and Manufacture, vol.40, issue.14, pp.402119-2137, 2000.
DOI : 10.1016/S0890-6955(00)00023-7

V. [. Gasparetto and . Zanotto, A technique for time-jerk optimal planning of robot trajectories, Robotics and Computer-Integrated Manufacturing, vol.24, issue.3, pp.415-426, 2008.
DOI : 10.1016/j.rcim.2007.04.001

C. M. Harris, Exploring smoothness and discontinuities in human motor behaviour with Fourier analysis, Mathematical Biosciences, vol.188, issue.1-2, pp.99-116, 2004.
DOI : 10.1016/j.mbs.2003.08.011

S. Hayati and M. Mimirani, Improving the absolute positioning accuracy of robot manipulators, Journal of Robotic Systems, vol.7, issue.4, pp.397-413, 1985.
DOI : 10.1002/rob.4620020406

]. T. Hwm-+-07, P. F. Huang, J. P. Wang, X. M. Mei, D. G. Zhao et al., Time minimum trajectory planning of a 2-dof translational parallel robot for pick-andplace operations, CIRP Annals -Manufacturing Technology, vol.56, issue.1, pp.365-368, 2007.

R. P. Judd, A technique to calibrate industrial robots with experimental verification, IEEE Transactions on Robotics and Automation, vol.6, issue.1, pp.20-30, 1990.
DOI : 10.1109/70.88114

N. Juneja, Kinematic Calibration of a Reconfigurable Robot (Robo Twin). Thesis, 1996.

W. Khalil and E. Dombre, Modeling, Identification and Control of Robots, Applied Mechanics Reviews, vol.56, issue.3, 2004.
DOI : 10.1115/1.1566397

W. Khalil and J. F. Kleinfinger, A new geometric notation for open and closed-loop robots, Proceedings. 1986 IEEE International Conference on Robotics and Automation, pp.1174-1179, 1986.
DOI : 10.1109/ROBOT.1986.1087552

. Kyc-+-90-]-m-s, H. Kim, S. Yoo, H. Cho, G. Chang et al., A new calibration method, 1990.

P. J. Laurent, Approximation et optimisation, 1972.

J. E. Lavery, Shape-preserving, multiscale fitting of univariate data by cubic L1 smoothing splines, Computer Aided Geometric Design, vol.17, issue.7, pp.715-727, 2000.
DOI : 10.1016/S0167-8396(00)00025-X

J. E. Lavery, Univariate cubic Lp splines and shape-preserving, multiscale interpolation by univariate cubic L1 splines, Computer Aided Geometric Design, vol.17, issue.4, pp.319-336, 2000.
DOI : 10.1016/S0167-8396(00)00003-0

J. E. Lavery, Shape-preserving univariate cubic and higher-degree splines with function-value-based and multistep minimization principles, Computer Aided Geometric Design, vol.26, issue.1, pp.1-16, 2009.
DOI : 10.1016/j.cagd.2008.01.004

Y. Li, S. Chen, and I. Kao, Stiffness control and transformation for robotic systems with coordinate and non-coordinate bases, pp.550-555, 2002.

C. Lin, P. Chang, and J. Y. Luh, Formulation and optimization of cubic polynomial joint trajectories for industrial robots, IEEE Transactions on Automatic Control, vol.28, issue.12, pp.281066-1074, 1983.
DOI : 10.1109/TAC.1983.1103181

A. Liégeois, Modélisation et commande des robots manipulateurs, p.730, 2000.

M. Mecquet, Analysis of flexibility sources in robot structures Proceeding of IMACS/IFAC International and Simulation of Distributed Parameter System, pp.419-424, 1987.

]. D. Mgs-+-11, M. Milutinovic, N. Glavonjic, Z. Slavkovic, S. Dimic et al., Reconfigurable robotic machining system controlled and programmed in a machine tool manner, International Journal of Advanced Manufacturing Technology, vol.53, pp.9-121217, 2011.

O. [. Nyiri, P. Gibaru, and . Auquiert, Fast polynomial spline interpolation algorithm with shape-preserving properties, Computer Aided Geometric Design, vol.28, issue.1, pp.65-74, 2011.
DOI : 10.1016/j.cagd.2010.10.002
URL : https://hal.archives-ouvertes.fr/hal-00777464

A. Olabi, R. Bearée, O. Gibaru, and M. Damak, Feedrate planning for machining with industrial six-axis robots, Control Engineering Practice, vol.18, issue.5, pp.471-482, 2010.
DOI : 10.1016/j.conengprac.2010.01.004
URL : https://hal.archives-ouvertes.fr/hal-00992192

A. Olabi, R. Bearee, E. Nyiri, and O. Gibaru, Enhanced trajectory planning for machining with industrial six-axis robots, 2010 IEEE International Conference on Industrial Technology, pp.500-506, 2010.
DOI : 10.1109/ICIT.2010.5472749
URL : https://hal.archives-ouvertes.fr/hal-00777390

L. Slodki, B. Pasko, and R. Przybylski, High speed machining (hsm)-the effective way of modern cutting. International Workshop CA Systems and Technologies, 2003.

]. R. Pau81 and . Paul, Robot Manipulators : Mathematics, Programming and Control, 1981.

A. Piazzi and A. Visioli, An interval algorithm for minimum-jerk trajectory planning of robot manipulators, Proceedings of the 36th IEEE Conference on Decision and Control, pp.1924-1927, 1997.
DOI : 10.1109/CDC.1997.657874

]. Z. Pz08a, H. Pan, and . Zhang, Robotic machining from programming to process control, Proceedings of the World Congress on Intelligent Control and Automation (WCICA), pp.499-503, 2008.

Z. Pan and H. Zhang, Robotic Machining from Programming to Process Control, pp.499-503, 2008.
DOI : 10.5772/9322

Z. Pan, H. Zhang, Z. Zhu, and J. Wang, Chatter analysis of robotic machining process, Journal of Materials Processing Technology, vol.173, issue.3, pp.301-309, 2006.
DOI : 10.1016/j.jmatprotec.2005.11.033

L. C. Rodriguez-donate, R. Morales-velazquez, G. Osornio-rios, R. Herrera-ruiz, and . Romero-troncoso, FPGA-Based Fused Smart Sensor for Dynamic and Vibration Parameter Extraction in Industrial Robot Links, Sensors, vol.10, issue.4, 2010.
DOI : 10.3390/s100404114

G. Reinhart, R. Graser, and R. Klingel, Qualification of Standard Industrial Robots to Cope with Sophisticated Assembly Tasks, CIRP Annals - Manufacturing Technology, vol.47, issue.1, 1998.
DOI : 10.1016/S0007-8506(07)62772-3

. [. Schulz, The history of high-speed machining, REVISTA DE CIENCIA & TECNOLOGIA, vol.13, issue.2, pp.9-18, 1988.

P. S. Shiakolas, K. L. Conrad, and T. C. Yih, On the accuracy, repeatability, and degree of influence of kinematics parameters for industrial robots, International Journal of Modelling and Simulation, vol.22, issue.4, pp.245-254, 2002.

A. Shaheen, Analysis of robot drive train errors, their static effects, and their compensations, IEEE journal of robotics and automation, vol.4, issue.2, pp.117-128, 1988.

I. J. Shoenberg, Contributions to the problem of approximation of equidistant data by analytic functions, 1946.

[. Siemens, Fabrication depì eces complexe en fraisage,manuel-edition, 2004.

]. M. Spo05 and . Spong, Robot Modeling and Control, 2005.

B. Siciliano, L. Sciavicco, L. Villani, and G. Oriolo, Robotics : Modelling, Planning and Control, 2009.
DOI : 10.1007/978-1-84628-642-1

D. T. Tuttle, Understanding and modeling the behavior of a harmonic drive gear transmission, 1992.

T. Tuttle, Creating time-optimal commands for linear systems, 1997.
DOI : 10.1109/cca.1996.558819

R. J. Vanderbei, Affine-scaling for linear programs with free variables, Mathematical Programming, pp.31-44, 1989.
DOI : 10.1007/BF01582276

]. R. Van01 and . Vanderbei, Linear Programming : Foundations and Extensions, 2001.

D. [. Veitschegge and . Wu, A method for calibration and compensationing robot kinematic errors, Proceedings of the IEEE International Conference on Robotics and Automation, pp.39-44, 1987.

T. Wongratanaphisan and M. Chew, Gravity compensation of spiral two-dof serial manipulators, Journal of Robotic Systems, 2002.

S. [. Wang, J. E. Fang, and . Lavery, A compressed primal-dual method for generating bivariate cubic <mml:math altimg="si18.gif" overflow="scroll" xmlns:xocs="http://www.elsevier.com/xml/xocs/dtd" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://www.elsevier.com/xml/ja/dtd" xmlns:ja="http://www.elsevier.com/xml/ja/dtd" xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:tb="http://www.elsevier.com/xml/common/table/dtd" xmlns:sb="http://www.elsevier.com/xml/common/struct-bib/dtd" xmlns:ce="http://www.elsevier.com/xml/common/dtd" xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:cals="http://www.elsevier.com/xml/common/cals/dtd"><mml:msub><mml:mrow><mml:mi>L</mml:mi></mml:mrow><mml:mrow><mml:mn>1</mml:mn></mml:mrow></mml:msub></mml:math> splines, Journal of Computational and Applied Mathematics, vol.201, issue.1, pp.69-87, 2007.
DOI : 10.1016/j.cam.2006.02.005

J. Wang, H. Zhang, and T. Fuhlbrigge, Improving machining accuracy with robot deformation compensation, 2009 IEEE/RSJ International Conference on Intelligent Robots and Systems, pp.3826-3831, 2009.
DOI : 10.1109/IROS.2009.5353988

D. C. Yang and T. Kong, Parametric interpolator versus linear interpolator for precision CNC machining, Computer-Aided Design, vol.26, issue.3, pp.225-234, 1994.
DOI : 10.1016/0010-4485(94)90045-0