P. T. Callaghan, Principles of nuclear magnetic resonance microscopy, 1991.

J. H. Kinney and M. C. Nichols, X-Ray Tomographic Microscopy (XTM) Using Synchrotron Radiation, Annual Review of Materials Science, vol.22, issue.1, pp.121-152, 1992.
DOI : 10.1146/annurev.ms.22.080192.001005

J. Baruchel, Absorption and phase X-Ray imaging to investigate porous materials, Ecole des Houches sur les matériaux poreux désordonnés, 1999.

H. Darcy, Les fontaines publiques de la ville de Dijon, 1856.

F. A. Dullien, Porous Media-Fluid Transport and Pore Structure, 2e éd, 1992.

Z. E. Heinemann, Fluid Flow in Porous Media Textbook series, 2003.

P. M. Adler, Porous Media : Geometry and Transports, 1992.

A. E. Scheidegger, The physics of flow through porous media, 3e éd, 1974.

J. R. Philip, Flow in Porous Media, «Flow in Porous Media, pp.177-204, 1970.
DOI : 10.1146/annurev.fl.02.010170.001141

K. Vafai, Handbook of porous media, 2e éd, 2005.

C. K. Ho and S. W. Webb, Theory and Application of Transport in Porous Media, Gas Transport in Porous Media, 2006.

H. V. Heyden, Silico-) Aluminophosphates : Synthesis and Application for Heat Storage and Transformation, Thèse de doctorat, 2008.

C. Arkar and S. Medved, «Enhanced Solar Assisted Building Ventilation System Using Sphere Encapsulated PCM Thermal Heat Storage,» IEA, ECES IA Annex 17, Advanced Thermal Energy Storage Techniques-Feasibility Studies and Demonstration Projects 2nd Workshop, pp.1-9, 2002.

B. Naitali, Elaboration, caractérisation et modélisation de matériaux poreux Influence de la structure poreuse sur la conductivité thermique effective, Matériaux céramiques et traitements de surface Thèse de doctorat de l'université de Limoges, 2005.

A. Mojtabi, S. Bories, M. Quintard, and M. Prat, Transfert de chaleur dans les milieux poreux - Conduction, convection, rayonnement, 2008.

J. Charpin and B. Rasneur, «Caractérisation de la texture poreuse des matériaux,» Technique de l'ingénieur, Traité Analyse et Caractérisation Référence P1050, pp.1-19, 1987.

R. B. Bird, W. E. Stewart, and E. N. Lightfoot, Transport phenomena, 2e éd, 2002.

D. A. Nield and A. Bejan, Convection in porous media, 3e éd, 2006.

M. Kaviany, Principles of heat transfert in porous media, 2e éd, 1995.

M. Loretz, Caractrérisation des propriétés thermiques de Mousses Céramiques et Métalliques à partir d'Analyse Tomographiques aux Rayon X, Thèse de doctorat à l'Institut National des Sciences Appliquées de Lyon, 2008.

S. Rodts, Etude du passage micro-macro pour le transport par diffusion en milieu poreux Application aux expériences de RMN-GCP, Thèse de doctorat de l'école Nationale Des Ponts et Chaussées, 2001.

R. W. Lewis and B. A. Schrefler, The Finite Element Method in the Static and Dynamic Deformation and Consolidation of Porous Media, 1998.

E. P. Barrett, L. G. Joyner, and P. P. , The Determination of Pore Volume and Area Distributions in Porous Substances. I. Computations from Nitrogen Isotherms, Journal of the American Chemical Society, vol.73, issue.1, pp.373-380, 1951.
DOI : 10.1021/ja01145a126

J. V. Kooi, Moisture transport in cellular concrete roof, 1991.

W. R. Purcell, Capillary Pressures - Their Measurement Using Mercury and the Calculation of Permeability Therefrom, Journal of Petroleum Technology, vol.1, issue.02, pp.39-48, 1949.
DOI : 10.2118/949039-G

H. K. Dahle, M. A. Celia, and S. M. Hassanizadeh, Bundle-of-Tubes Model for Calculating Dynamic Effects in the Capillary-Pressure- Saturation Relationship, Transport in Porous Media, vol.17, issue.10, pp.5-22, 2005.
DOI : 10.1007/s11242-004-5466-4

J. Wang, F. A. Dullien, and M. Dong, Fluid transfer between tubes in interacting capillary bundle models, Transport in Porous Media, vol.17, issue.3, pp.115-131, 2008.
DOI : 10.1007/s11242-007-9115-6

J. Daian, Equilibre et transferts en milieu poreux, 2010.

P. C. Carman, Fluid flow through granular beds, Chemical Engineering Research and Design, vol.75, pp.150-166, 1937.
DOI : 10.1016/S0263-8762(97)80003-2

H. L. Ritter and D. L. Drake, Pore Size Distribution in Porous Materials, Analytical Chemistry, vol.20, issue.7, pp.782-791, 1945.
DOI : 10.1021/ac60019a025

L. Langmuir, THE CONSTITUTION AND FUNDAMENTAL PROPERTIES OF SOLIDS AND LIQUIDS. PART I. SOLIDS., Journal of the American Chemical Society, vol.38, issue.11, p.2221, 1916.
DOI : 10.1021/ja02268a002

S. Brunauer and P. , Adsorption of Gases in Multimolecular Layers, Journal of the American Chemical Society, vol.60, issue.2, pp.309-319, 1938.
DOI : 10.1021/ja01269a023

«. and ». Décembre, Available: http://nte.enstimac.fr, 2008.

S. Lowell and J. E. Shields, Powder surface area and porosity, 3e éd, 1991.
DOI : 10.1007/978-94-009-5562-2

J. H. Boer, The dynamic character of adsorption, 1955.

W. Kuhn, E. Peterli, and H. Majer, Freezing point depression of gels produced by high polymer network, Journal of Polymer Science, vol.16, issue.82, pp.539-548, 1955.
DOI : 10.1002/pol.1955.120168238

M. Brun, A. Lallemand, J. Quinson, and C. Eyraud, A new method for the simultaneous determination of the size and shape of pores: the thermoporometry, Thermochimica Acta, vol.21, issue.1, pp.59-88, 1977.
DOI : 10.1016/0040-6031(77)85122-8

M. Wulff, Pore size determination by thermoporometry using acetonitrile, Thermochimica Acta, vol.419, issue.1-2, pp.291-294, 2004.
DOI : 10.1016/j.tca.2004.03.006

J. Nedelec, J. E. Grolier, and M. Baba, Thermoporosimetry: A powerful tool to study the cross-linking in gels networks, Journal of Sol-Gel Science and Technology, vol.9, issue.2, pp.191-200, 2006.
DOI : 10.1007/s10971-006-9115-y
URL : https://hal.archives-ouvertes.fr/hal-00154680

T. Yamamoto, A. Ando, Y. Inagi, T. Ohmori, and M. Nakaiwa, Evaluation of thermoporometry for characterization of mesoporous materials, Journal of Colloid and Interface Science, vol.284, issue.2, pp.614-620, 2005.
DOI : 10.1016/j.jcis.2004.10.025

J. Riikonen, J. Salonen, and V. Lehto, Calorimetric determination of pore size distribution using thermoporometry, conférence de Society of physical pharmacy en Turquie, 2006.

J. M. Haynes, Stereological analysis of pore structure, Mat??riaux et Constructions, vol.6, issue.3, pp.175-179, 1973.
DOI : 10.1007/BF02479030

H. Tamon and H. , SAXS Study on Gelation Process in Preparation of Resorcinol???Formaldehyde Aerogel, Journal of Colloid and Interface Science, vol.206, issue.2, pp.577-582, 1998.
DOI : 10.1006/jcis.1998.5770

D. Pearson and A. J. Allen, A study of ultrafine porosity in hydrated cements using small angle neutron scattering, Journal of Materials Science, vol.5, issue.1, pp.303-315, 1985.
DOI : 10.1007/BF00555924

R. Bleta, Système fluorés pour la conception de matériaux poreux Matrice pour la physisorption de biomolécules, 2007.

S. Eko, A. Prasetyanto, S. Han, and S. Park, «Styrene epoxidation over cobalt cyclam immobilized SBA-15 catalyst, J. Bull. Korean Chem. Soc, vol.27, pp.1381-1385

J. R. Womersley, Method for the calculation of velocity, rate of flow and viscous drag in arteries when the pressure gradient is known, The Journal of Physiology, vol.127, issue.3, pp.553-563, 1955.
DOI : 10.1113/jphysiol.1955.sp005276

P. C. Carman, Fluid flow through granular beds, Chemical Engineering Research and Design, vol.75, pp.154-155, 1937.
DOI : 10.1016/S0263-8762(97)80003-2

P. C. Carman, «Determination of the specific surface of powders, J. Soc. Chem. Indus, vol.57, pp.225-234, 1938.

P. C. Carman, Flow of gases through porous media, 1956.

M. Benna, N. Kbir-ariguib, and A. , Effect of pH on Rheological Properties of Purified Sodium Bentonite Suspensions, Journal of Colloid and Interface Science, vol.218, issue.2, pp.442-455, 1999.
DOI : 10.1006/jcis.1999.6420

E. C. Bingham, An investigation of the laws of plastic flow, Bulletin of the Bureau of Standards, vol.13, issue.2, pp.309-353, 1916.
DOI : 10.6028/bulletin.304

E. C. Bingham, Fluidity and plasticity, 1922.

N. Casson, «A flow equation for pigment-oil suspensions of the printing ink type, British Society of Rheology Proc., Rheology of Disperse Systems, pp.84-104, 1959.

J. Blackery and E. Mitsoulis, Creeping motion of a sphere in tubes filled with a Bingham plastic material, Journal of Non-Newtonian Fluid Mechanics, vol.70, issue.1-2, pp.59-77, 1997.
DOI : 10.1016/S0377-0257(96)01536-4

F. Yilmaz and M. Y. Gundogdu, «A critical review on blood flow in large arteries; relevance to blood rheology viscosity models, and physiologic conditions, Australia Rheology Journal, vol.20, issue.14, pp.197-211, 2008.

S. Bhattacharya and S. Bhattacharya, Rheology of cooked debranned maize flour suspensions, Journal of Food Engineering, vol.27, issue.1, pp.97-105, 1996.
DOI : 10.1016/0260-8774(94)00083-L

N. Tixier, Approche des propriétés rhéologiques de suspensions biologiques floculées, Thèse de doctorat de l'université de Limoges, p.35, 2003.

R. P. Chhabra, Bubbles, drops, and particles in non-Newtonian fluids, 2e éd., CRC Taylor and Francis, 2007.

A. Pevere, Apport des mesures rhéologiques à l'étude des biomasses épuratoires granulaires anaérobies, Thèse de doctorat de l'université de Limoges, p.46, 2006.

E. Park and K. , Rheological evaluation of petroleum jelly as a base material in ointment and cream formulations: Steady shear flow behavior, Archives of Pharmacal Research, vol.129, issue.1, pp.141-150, 2010.
DOI : 10.1007/s12272-010-2236-4

H. Boussak, Caractérisation rhéologique d'une substance polymérique. Cas d'une suspension bentonitique, Mémoire de magister de l'université m'hamed bougara de boumerdes, p.22, 2008.

M. V. Ochoa, Analysis of drilling fluid rheology and tool joint effect to reduce errors in hydraulics calculations, Thèse de doctorat de l'université de Texas A&M, p.42, 2006.

R. E. Robertson and H. A. , Stiff, «An improved mathematical model for relating shear stress to shear rate in drilling fluids and cement slurries,» Soc, Petrol. Eng. J, pp.31-36, 1976.

D. H. Pelegrine, F. C. Silva, and C. A. Gasparetto, «Rheological behavior of pineapple and Mango Pulps,» Lebensm, pp.645-648, 2002.

S. Mizhari and Z. Berk, «Flow behavior of concentrated orange juice: mathematical treatment, J. Texture Stud, vol.3, 1972.

M. Khalil, M. J. Badrul, and A. R. Aziz, Rheological and statistical evaluation of nontraditional lightweight completion fluid and its dependence on temperature, Journal of Petroleum Science and Engineering, vol.77, issue.1, pp.27-33, 2011.
DOI : 10.1016/j.petrol.2011.02.001

P. Banfill, «The rheology of fresh cement and concrete-A review, chez Conférence de Proc. 11th International Cement Chemistry, 2003.

A. Yahia and K. H. Khayat, Analytical models for estimating yield stress of high-performance pseudoplastic grout, Cement and Concrete Research, vol.31, issue.5, pp.731-738, 2001.
DOI : 10.1016/S0008-8846(01)00476-8

C. Tiu, J. Gio, and P. H. , Uhlherr, «Yielding behavior of viscoplastic materials, J. Ind. Eng. Chem, vol.12, pp.653-662, 2006.

P. H. Uhlherr, J. Guo, T. Fang, and C. Tiu, «Static measurement of yield stress using a cylindrical penetrometer, Australia Rheology Journal, vol.14, issue.11, pp.17-23, 2002.

A. Ambari, M. Benhamou, S. Roux, and E. Guyon, «Pore size distribution in a porous medium obtained by a non-Newtonian fluid flow characteristic, C. R. Acad. Sci. Paris, pp.1291-1295, 1990.

J. Peixinho, Contribution expérimentale à l'étude de la convection thermique en régime laminaire, transitoire et turbulent par un fluide à seuil en écoulement dans une conduite, Thèse de doctorat de l'université Henri Poincaré-Nancy1, p.5, 2004.

E. Buckingham, «On plastic flow through capillary tubes,» Proc, Am. Soc. Test. Mats, pp.1154-1161, 1921.

A. Oukhlef, A. Ambari, S. Champmartin, and A. , Despeyroux, «Yield stress fluid method to mesure the pore size distribution of a porous medium, chez Proceedings of ASME 2010, 3rd Joint US- European Fluids Engineering Summer Meeting and 8th International Conference on Nanochannels, Microchannels, and Minichannels, 2010.

R. B. Bird, R. C. Armstrong, and O. Hassager, Dynamics of polymeric liquids, 1987.

G. W. Govier and K. Aziz, The Flow of Complex Mixtures in Pipes, Journal of Applied Mechanics, vol.40, issue.2, 1982.
DOI : 10.1115/1.3422996

R. B. Bird, G. C. Dai, and B. J. , Yarusso, «The rheology and flow of viscoplastic materials,» Rev, Chem. Eng, vol.1, p.1, 1983.

R. P. Chhabra and J. F. Richardson, Non-Newtonian flow in the process industries : fundamentals and engineering applications, p.81, 1999.

T. Sochi, Modeling the flow of yield-stress fluids in porous media, Physics.flu-dyn, p.9, 2009.

M. Balhoff, Modeling the flow of non-Newtonian fluids in packed beds at the pore scale, Thèse de doctorat de l'université de Louisiana State, p.160, 2005.

A. Oukhlef, A. Ambari, S. Champmartin, and A. , Despeyroux, «Generalization of the yield stress fluid method to measure the pore size distribution of a porous medium, chez 3rd International Conference on Porous Media, 2011.

A. Oukhlef, A. Ambari, S. Champmartin, and A. , Despeyroux, «Détermination de la distribution de tailles de pores d'un milieu poreux par la méthode des fluides à seuil,» chez 20ème Congrès Français de Mécanique, 2011.

K. B. Oldham and J. Spanier, The fractional calculus, p.53, 1974.

R. Comolet, Mécanique expérimentale des fluides, 1976.

H. K. Versteeg and W. Malalasekera, An introduction to computational fluid dynamics, 1995.

P. Viot, Méthode d'analyse numérique, Cours du DEA, "modélisation dynamique et statistique des systèmes complexes, pp.69-70, 2003.

L. Landau and E. Lifchitz, Physique théorique, Mécanique des fluides, 3e éd, p.79, 1994.

S. R. Khamrui, «On the flow of a viscous liquid through a tube of elliptic section under the influence of a periodic pressure gradient,» Bull, Calcutta Math. Soc, vol.49, pp.57-60, 1957.

M. Haslam and M. Zamir, Pulsatile Flow in Tubes of Elliptic Cross Sections, Annals of Biomedical Engineering, vol.26, issue.5, pp.780-787, 1998.
DOI : 10.1114/1.106

N. W. Mclachlan, Theory and application of Mathieu functions, p.27, 1964.

M. Abramowitz and I. Stegun, Handbook of Mathematical Functions, American Journal of Physics, vol.34, issue.2, 1965.
DOI : 10.1119/1.1972842