K. T. Aas-jakobsen, Fatigue of concrete beam and columns, NTH Institute of Betongkonstruksjoner, Bulletin, vol.701, 1970.

E. Absi, Methodes de calcul numérique et élasticité, 1978.

E. Absi, Theorie des équivalences : nouveaux développements et applications, Comité technique de l'association française des ponts et chaussées, 1972.

A. Alliche, Damage model for fatigue loading of concrete, International Journal of Fatigue, vol.26, issue.9, pp.915-921, 2004.
DOI : 10.1016/j.ijfatigue.2004.02.006

C. Andersson and A. Johansson, Prediction of rail corrugation generated by three-dimensional wheel???rail interaction, Wear, vol.257, issue.3-4, pp.423-434, 2004.
DOI : 10.1016/j.wear.2004.01.006

J. F. Archard, Contact and Rubbing of Flat Surfaces, Journal of Applied Physics, vol.24, issue.8, pp.981-988, 1953.
DOI : 10.1063/1.1721448

K. S. Baek, An experimental investigation of transient traction characteristics in rolling???sliding wheel/rail contacts under dry???wet conditions, Wear, vol.263, issue.1-6, 2007.
DOI : 10.1016/j.wear.2007.01.067

L. Baeza, Prediction of corrugation in rails using a non-stationary wheel-rail contact model, th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems, 2006.
DOI : 10.1016/j.wear.2008.01.024

G. I. Barenblatt and L. R. Botvina, INCOMPLETE SELF-SIMILARITY OF FATIGUE IN THE LINEAR RANGE OF CRACK GROWTH, Fatigue & Fracture of Engineering Materials and Structures, vol.5, issue.3, pp.193-202, 1980.
DOI : 10.1016/0036-9748(75)90337-3

J. Baron, La fatigue du béton hydraulique, Press de l'ENPC, 1982.

G. Baumann, K. Knothe, and H. J. Fecht, Surface modification, corrugation and nanostructure formation of high speed railway tracks, Nanostructured Materials, vol.9, issue.1-8, pp.751-754, 1997.
DOI : 10.1016/S0965-9773(97)00162-1

Z. P. Bazant and J. Ozbolt, Nonlocal Microplane Model for Fracture, Damage, and Size Effect in Structures, Journal of Engineering Mechanics, vol.116, issue.11, pp.2485-2505, 1990.
DOI : 10.1061/(ASCE)0733-9399(1990)116:11(2485)

Z. P. Bazant and K. Xu, Size effect in fatigue fracture of concrete, ACI Journal, pp.88-134, 1991.

Z. P. Bazant and W. F. Schell, Fatigue fracture of high strength concrete and size effect, ACI Materials Journal, issue.5, pp.90-50, 1993.

Z. P. Bazant, Concrete fracture models: testing and practice, Engng Fract, Mech, vol.69, pp.165-205, 2002.

M. S. Bingley and S. Schnee, A study of the mechanisms of abrasive wear for ductile metals under wet and dry three-body conditions, Wear, vol.258, issue.1-4, pp.50-61, 2005.
DOI : 10.1016/j.wear.2004.01.022

D. Bodin, Modèle d'endommagement cyclique : Application à la fatigue des enrobés bitumineux

D. Bodin, Endommagement en fatigue des matériaux bitumineux: Comparaison des essays de laboratoire, Journées Techniques Routes, 2008.

A. F. Bower and K. L. Et-johnson, Plastic flow and shakedown of the rail surface in repeated wheel-rail contact, Wear, vol.144, issue.1-2, pp.1-18, 1991.
DOI : 10.1016/0043-1648(91)90003-D

F. Braghim, A mathematical model to predict railway wheel profile evolution due to wear, Wear, vol.261, issue.11-12, pp.1253-1264, 2006.
DOI : 10.1016/j.wear.2006.03.025

D. Broek and J. Schijve, The influence of the mean stress on the propagation of fatigue cracks in aluminium alloy sheet, 1963.

F. Bucher, K. Knothe, and A. Theiler, Normal and tangential contact problem of surfaces with measured roughness, Wear, vol.253, issue.1-2, pp.204-218, 2002.
DOI : 10.1016/S0043-1648(02)00102-3

F. Bucher, Multiscale simulation of dry friction in wheel/rail contact, Wear, vol.261, issue.7-8, pp.874-884, 2006.
DOI : 10.1016/j.wear.2006.01.046

M. C. Burstow, Whole Life Rail Model Application and Development for RSSB ? Continued Development of an RCF Damage Parameter

P. B. Cachim, Effects of long steel fibres on the fatigue life of concrete, 1999.

D. F. Cannon and H. Et-pradier, Rail rolling contact fatigue Research by the European Rail Research Institute, Wear, vol.191, issue.1-2, pp.1-13, 1996.
DOI : 10.1016/0043-1648(95)06650-0

A. Carpinteri and A. Spagnoli, A fractal analysis of size effect on fatigue crack growth, International Journal of Fatigue, vol.26, issue.2, pp.125-133, 2004.
DOI : 10.1016/S0142-1123(03)00142-7

F. W. Carter, On the Action of a Locomotive Driving Wheel, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.112, issue.760, pp.151-157, 1926.
DOI : 10.1098/rspa.1926.0100

L. Cedolin, S. Deipoli, and I. Iori, Tensile Behavior of Concrete, Journal of Engineering Mechanics, vol.113, issue.3, pp.431-449, 1987.
DOI : 10.1061/(ASCE)0733-9399(1987)113:3(431)

D. Chang and W. K. Chai, Flexural fracture and fatigue behavior of steel-fiber-reinforced concrete structures, Nuclear Engineering and Design, vol.156, issue.1-2, pp.201-207, 1995.
DOI : 10.1016/0029-5493(94)00946-V

P. Clayton, Tribological aspects of wheel-rail contact: a review of recent experimental research, Wear, vol.191, issue.1-2, pp.170-183, 1996.
DOI : 10.1016/0043-1648(95)06651-9

C. D. Johnston and R. W. Zemp, Flexural fatigue performance of steel fiber reinforced concrete ? Influence of fiber content, aspect ratio and type, ACI Journal, pp.88-132, 1991.

C. Collette, Usure ondulatoire en transport ferroviaire-mécanisme et réduction, thèse de l'ULB, 2007.

H. A. Cornelissen, W, Fatigue failure of concrete in tension, pp.1-68, 1984.

J. F. Coste, Les essais de chaussées en béton sur le manège de fatigue du LCPC, 1992.

. Cusatis, Confinement-Shear Lattice Model for Concrete Damage in Tension and Compression: I. Theory, Journal of Engineering Mechanics, vol.129, issue.12, p.129, 2003.
DOI : 10.1061/(ASCE)0733-9399(2003)129:12(1439)

K. Dangvan and H. Et-maitournam, Steady state flow in classical elastoplasticity: application to repeadted rolling and sliding contact, J. Mech. Phys. Solids, vol.41, issue.11, pp.1691-1710, 1993.

K. Dangvan, H. Maitournam, and B. Et-prasil, Elastoplastic analysis of repeated moving contact application to railways damage phenomena, Wear, vol.196, issue.1-2, pp.77-81, 1996.
DOI : 10.1016/0043-1648(95)06864-3

K. Dangvan and H. Et-maitournam, On some recent trends in modeling of contact fatigue and wear in rail, Wear, vol.25, pp.219-227, 2002.

K. Dangvan and H. Et-maitournam, Fatigue polycyclique des structures, Cours de l'Ecole Polytechnique, 2004.

K. Dangvan, H. Et-maitournam, Z. Moumni, and F. Roget, A global approach for modeling fatigue and fracture of rails, Vème Journées d'études technique, Les sciences et les technologies mécaniques, moteurs du développement durable dans les secteurs des énergies renouvelables, des transports et de la santé, 2008.

S. Descartes, Presence and role of the third body in a wheel???rail contact, Wear, vol.258, issue.7-8, pp.1081-1090, 2005.
DOI : 10.1016/j.wear.2004.03.068

R. Desmorat, Damage and fatigue, Revue Europ??enne de G??nie Civil, vol.16, issue.6-7, 2006.
DOI : 10.1016/0001-6160(84)90213-X
URL : https://hal.archives-ouvertes.fr/hal-00106719

G. Diana, Experimental and numerical investigation on subway short pitch corrugation, Vehicle System Dynamics, pp.234-245, 1998.

M. T. Do, C. Omar, P. Claude, and A. , Fatigue behaviour of high performance concrete, Journal of Materials in civil Engineering, vol.5, issue.1, 1993.

G. Donzella, The competitive role of wear and RCF in a rail steel, Engineering Fracture Mechanics, vol.72, issue.2, pp.287-308, 2003.
DOI : 10.1016/j.engfracmech.2004.04.011

M. Dragon-luiset, Contribution à une approche théorique de la mécanique de l'usure, 2000.

A. Dragon, Anisotropic damage in quasi-brittle solids: modelling, computational issues and applications, Computer Methods in Applied Mechanics and Engineering, vol.183, issue.3-4, pp.331-352, 2000.
DOI : 10.1016/S0045-7825(99)00225-X

J. Du, J. H. Yon, N. M. Hawkins, A. Kobayashi, S. Shah et al., Analysis of the Fracture Process Zone of a Propagating Concrete Crack Using Moire Interferometry, Micromechanics of Failure of Quasi-Brittle Materials, pp.146-155, 1990.

E. D. Kalousek and J. , The role of high positive friction modifier in the control of short pitch corrugations and related phenomena, Wear, vol.253, pp.185-192, 2002.

J. I. Egana, Investigation of the influence of rail pad stiffness on rail corrugation on a transit system, Wear, vol.261, issue.2, pp.216-224, 2006.
DOI : 10.1016/j.wear.2005.10.004

A. Ekberg and J. C. Nielsen, Subsurface initiated rolling contact fatigue of railway wheels as generated by rail corrugation, International Journal of Solids and Structures, vol.44, issue.24, 2007.
DOI : 10.1016/j.ijsolstr.2007.05.022

A. Ekberg, Rolling contact fatigue of railway wheels ? computer modelling and in-field data, 1995.

A. Ekberg, Rolling contact fatigue of railway wheels???a parametric study, Wear, vol.211, issue.2, pp.280-288, 1997.
DOI : 10.1016/S0043-1648(97)00106-3

A. Ekberg, An engineering model for prediction of rolling contact fatigue of railway wheels, CHARMEC, SE-412 96 Gotbenburg Sweden, 2002.

A. Ekberg and E. Et-kabo, Fatigue of railway wheels and rails under rolling contact and thermal loading???an overview, Wear, vol.258, issue.7-8, pp.1288-1300, 2005.
DOI : 10.1016/j.wear.2004.03.039

A. Ekberg, Subsurface initiated rolling contact fatigue of railway wheels as generated by rail corrugation, International Journal of Solids and Structures, vol.44, issue.24, pp.7975-7987, 2007.
DOI : 10.1016/j.ijsolstr.2007.05.022

R. Enblom and M. Berg, Impact of non-elliptic contact modelling in wheel wear simulation, th International Conference on Contact Mechanics and Wear of Rail-Wheel Systems, 2006.
DOI : 10.1016/j.wear.2008.01.027

F. Erdogan and M. Ratwani, Fatigue and fracture of cylindrical shells containing a circumferential crack, International Journal of Fracture Mechanics, vol.6, issue.4, 1970.
DOI : 10.1007/BF00182626

C. Esveld, Modern Railway Track, 2001.

J. R. Evans and M. C. Burstow, Vehicle/track interaction and rolling contact fatigue in rails in the UK, Vehicle System Dynamics, vol.26, issue.sup1, pp.708-717, 2006.
DOI : 10.1080/00423110600883652

J. A. Figueiras and D. Owen, Non-linear analysis of reinforced concrete shell structures. Intl. conf. on Computer Aided Analysis and Design of Concrete Structures, pp.509-532, 1984.

N. Fillot, I. Iordanoff, and Y. Berthier, Wear modeling and the third body concept, Wear, vol.262, issue.7-8, pp.949-957, 2007.
DOI : 10.1016/j.wear.2006.10.011

D. I. Fletcher and A. Kapoor, Rapid method of stress intensity factor calculation for semi-elliptical surface breaking cracks under three-dimensional contact loading, Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, vol.144, issue.2
DOI : 10.1243/09544097JRRT27

D. I. Fletcher, Rail rolling contact fatigue dependence on friction, predicted using fracture mechanics with a three-dimensional boundary element model, Engineering Fracture Mechanics, vol.76, issue.17, pp.2612-2625, 2009.
DOI : 10.1016/j.engfracmech.2009.02.019

M. L. Footer, Y. Mai, and B. Cotterell, Crack growth resistance curves in strain-softening materials, J

R. A. Ford and D. J. Thompson, Simplified contact filters in wheel/rail noise prediction, Journal of Sound and Vibration, vol.293, issue.3-5, pp.807-818, 2006.
DOI : 10.1016/j.jsv.2005.08.049

A. G. Forman, Numerical Analysis of Crack Propagation in Cyclic-Loaded Structures, Journal of Basic Engineering, vol.89, issue.3, pp.459-469, 1967.
DOI : 10.1115/1.3609637

F. J. Franklin and A. Kapoor, Modelling wear and crack initiation in rails, Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, vol.221, issue.1, 2006.
DOI : 10.1243/0954409JRRT60

N. E. Frost and D. S. Dugdale, The propagation of fatigue cracks in sheet specimens, Jounal of the Mechanics and Physics of Solids, pp.92-110, 1958.

W. Fuchs, R. Eligehause, and J. E. Breen, Concrete capacity design approach for fastening to concrete, ACI Journal, pp.92-101, 1995.

J. W. Galloway, Effects of age on flexural fatigue and compressive strength of concrete, 1979.

C. Gaedicke, Fatigue crack growth prediction in concrete slabs, International Journal of Fatigue, vol.31, issue.8-9, pp.1309-1317, 2009.
DOI : 10.1016/j.ijfatigue.2009.02.040

I. Gomez and E. G. Vadillo, An analytical approach to study a special case of booted sleeper track rail corrugation, Wear, vol.251, issue.1-12, pp.916-924, 2001.
DOI : 10.1016/S0043-1648(01)00750-5

I. Gomez and E. G. Vadillou, A linear model to explain short pitch corrugation on rails, Wear, vol.255, issue.7-12, pp.1127-1142, 2003.
DOI : 10.1016/S0043-1648(03)00282-5

I. Gomez, A comprehensive track model for the improvement of corrugation models, Journal of Sound and Vibration, vol.293, issue.3-5, pp.522-534, 2006.
DOI : 10.1016/j.jsv.2005.08.064

V. S. Gopalaratnam and S. Shah, Softening response of plain concrete in direct tension, ACI Journal, vol.82, issue.3, pp.310-323, 1985.

S. L. Grassie, Short wavelength rail corrugation: field trials and measuring technology, Wear, vol.191, issue.1-2, pp.149-160, 1996.
DOI : 10.1016/0043-1648(95)06755-8

S. L. Grassie, MEASUREMENT OF LONGITUDINAL RAIL IRREGULARITIES AND CRITERIA FOR ACCEPTABLE GRINDING, Journal of Sound and Vibration, vol.227, issue.5, pp.949-964, 1999.
DOI : 10.1006/jsvi.1999.2980

S. L. Grassie, Rail corrugation: advances in measurement, understanding and treatment, Wear, vol.258, issue.7-8, pp.1224-1234, 2005.
DOI : 10.1016/j.wear.2004.03.066

S. L. Grassie and J. W. Edwards, Development of corrugation as a result of varying normal load, th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems, 2006.
DOI : 10.1016/j.wear.2008.01.034

S. L. Grassie, Rolling contact fatigue on the British railway system: treatment, Wear, vol.258, issue.7-8, pp.1310-1318, 2005.
DOI : 10.1016/j.wear.2004.03.065

H. D. Grohmann and W. Schoech, Contact geometry and surface fatigue???minimizing the risk of headcheck formation, Wear, vol.253, issue.1-2, pp.54-59, 2002.
DOI : 10.1016/S0043-1648(02)00082-0

L. P. Guo, Investigation on fatigue damage mechanism of modern concrete microstructure by lattice model, st International Conference on Microstructure Related Durability of Cementitious Composites, 2008.

L. P. Guo, Fatigue damage of high performance concrete through a 2D mesoscopic lattice model, Computational Materials Science, vol.44, issue.4, pp.1098-1106, 2009.
DOI : 10.1016/j.commatsci.2008.07.030

L. P. Guo, Experimental and numerical investigations on fatigue damage propagation and life prediction of high-performance concrete containing reactive mineral admixtures, International Journal of Fatigue, vol.32, issue.2, pp.227-237, 2010.
DOI : 10.1016/j.ijfatigue.2009.05.009

K. Gylltoft, Fracture Mechanics Models for Fatigue in Concrete Structures, 1983.

D. J. Haines and E. Ollerton, Contact stress distributions on elliptical contact surface subjected to radial and tangential forces, Proceeding, Institution of Mechanical Engineers, pp.95-261, 1963.

K. Hempelmann, F. Hiss, K. Knothe, and B. Ripke, The formation of wear patterns on rail tread, Wear, pp.144-179, 1991.

K. Hempelmann, The formation of wear patterns on rail tread, Wear, vol.144, issue.1-2, pp.179-195, 1991.
DOI : 10.1016/0043-1648(91)90014-L

K. Hempelmann and K. Knothe, An extended linear model for the prediction of short pitch corrugation, Wear, vol.191, issue.1-2, pp.161-169, 1996.
DOI : 10.1016/0043-1648(95)06747-7

G. Hénaff and F. Et-morel, Fatigue des structures ? Endurance, critères de dimensionnement, propagation des fissures, rupture, 2005.

H. J. Herrmann, A. Hansen, and S. Roux, Fracture of disordered, elastic lattices in two dimensions, Physical Review B, vol.39, issue.1, pp.637-647, 1989.
DOI : 10.1103/PhysRevB.39.637

H. Hertz, On the contact of elastic solids, 1896.

M. Hiensch, J. C. Nielsen, and E. Verheijen, Rail corrugation in The Netherlands???measurements and simulations, Wear, vol.253, issue.1-2, pp.140-149, 2002.
DOI : 10.1016/S0043-1648(02)00093-5

A. Hillerborg, M. Modeer, and P. G. Petersson, Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements, Ciment and concrete research, pp.773-786, 1976.
DOI : 10.1016/0008-8846(76)90007-7

D. A. Hordijk, Local approach to fatigue of concrete, 1991.

H. Horii, Mechanics of fatigue crack growth in concrete, Cement and concrete composites, pp.83-89, 1992.

T. T. Hsu, Fatigue of plain concrete, ACI Journal, pp.78-105, 1981.

A. Igeland and H. Ilias, Rail head corrugation growth predictions based on non-linear high frequency vehicle/track interaction, Wear, vol.213, issue.1-2, pp.90-97, 1997.
DOI : 10.1016/S0043-1648(97)00172-5

H. Ilias, THE INFLUENCE OF RAILPAD STIFFNESS ON WHEELSET/TRACK INTERACTION AND CORRUGATION GROWTH, Journal of Sound and Vibration, vol.227, issue.5, pp.935-948, 1999.
DOI : 10.1006/jsvi.1999.2059

R. Ince, A. Arslan, and B. Karihaloo, Lattice modelling of size effect in concrete strength, Engineering Fracture Mechanics, vol.70, issue.16
DOI : 10.1016/S0013-7944(02)00219-9

M. Ishida, T. Moto, and M. Takikawa, The effect of lateral creepage force on rail corrugation on low rail at sharp curves, Wear, vol.253, issue.1-2, pp.172-177, 2002.
DOI : 10.1016/S0043-1648(02)00096-0

A. Jagota and S. J. Bennison, Spring-network and finite-element models for elasticity and fracture, Physics and astronomy, vol.437, pp.186-201, 1994.
DOI : 10.1007/3-540-58652-0_37

X. Jin, Effect of a scratch on curved rail on initiation and evolution of rail corrugation, Tribology International, vol.37, issue.5, pp.385-394, 2004.
DOI : 10.1016/j.triboint.2003.07.002

X. Jin, Numerical simulation of rail corrugation on a curved track, Computers & Structures, vol.83, issue.25-26, pp.2052-2065, 2005.
DOI : 10.1016/j.compstruc.2005.03.012

X. Jin, Effect of track irregularities on initiation and evolution of rail corrugation, Journal of Sound and Vibration, vol.285, issue.1-2, pp.121-148, 2005.
DOI : 10.1016/j.jsv.2004.08.042

X. Jin, Effect of passenger car curving on rail corrugation at a curved track, Wear, vol.260, issue.6, pp.619-633, 2006.
DOI : 10.1016/j.wear.2005.03.016

X. Jin, Three-dimensional train???track model for study of rail corrugation, Journal of Sound and Vibration, vol.293, issue.3-5, pp.830-855, 2006.
DOI : 10.1016/j.jsv.2005.12.013

A. Johansson, Out-of-round railway wheel: Causes and consequences, 2005.

A. Johansson and J. C. Nielsen, Rail corrugation growth???Influence of powered wheelsets with wheel tread irregularities, Wear, vol.262, issue.11-12, pp.1296-1307, 2007.
DOI : 10.1016/j.wear.2007.01.004

K. L. Johnson, Contact Mechanics, 1985.

K. L. Johnson, The application of shakedown principles in rolling and sliding contact, Eur J Mech, vol.11, pp.155-172, 1992.

J. W. Ju, On energy-based coupled elastoplastic damage theories: Constitutive modeling and computational aspects, International Journal of Solids and Structures, vol.25, issue.7, pp.803-833, 1989.
DOI : 10.1016/0020-7683(89)90015-2

L. M. Kachanov, Time of the rupture process under creep conditions, Isv. Akad. Nauk. SSR. Otd Tekh

K. Hwan, K. June, S. Et-hsu, and T. T. , Shear fatigue behavior of steel fiber reinforced concrete beams, ACI Structural Journal, pp.88-106, 1991.

J. J. Kalker, Rolling with slip and spin in the presence of dry friction, Wear, vol.9, issue.1, pp.20-38, 1966.
DOI : 10.1016/0043-1648(66)90011-1

J. J. Kalker, The tangential force transmitted by two elastic bodies rolling over each other with pure creepage, Wear, vol.11, issue.6, p.11, 1968.
DOI : 10.1016/0043-1648(68)90551-6

J. J. Kalker, A Fast Algorithm for the Simplified Theory of Rolling Contact, Vehicle System Dynamics, vol.5, issue.1, pp.1-13, 1982.
DOI : 10.1080/00423118208968684

J. J. Kalker, Mathematical models of friction for contact problems in elasticity, Wear, vol.113, issue.1, pp.61-77, 1986.
DOI : 10.1016/0043-1648(86)90056-6

J. J. Kalker, Variational and non-variational theory of frictionless adhesive contact between elastic bodies, Wear, vol.119, issue.1, pp.119-63, 1987.
DOI : 10.1016/0043-1648(87)90098-6

J. J. Kalker, Wheel-rail rolling contact theory, Wear, pp.144-243, 1991.

J. J. Kalker, Simulation of the development of a railway wheel profile through wear, Wear, vol.150, issue.1-2, pp.150-355, 1991.
DOI : 10.1016/0043-1648(91)90329-S

J. J. Kalker, Considerations on rail corrugation, Vehicle System Dynamics, pp.3-28, 1994.

A. Kapoor, A model for the mild ratchetting wear of metals, Wear, vol.200, issue.1-2, pp.38-44, 1996.
DOI : 10.1016/S0043-1648(96)07329-2

A. Kapoor, Wear by plastic ratchetting, Wear, vol.212, issue.1, pp.119-130, 1997.
DOI : 10.1016/S0043-1648(97)00083-5

A. Kapoor, The effect of partial slip on the wear rate of rails, Wear, vol.258, pp.1031-1037, 2005.

A. Kapoor, Managing the critical wheel/rail interface, The University of Sheffield, 2002.

A. Kapoor and J. A. Williams, Shakedown limits in rolling-sliding point contacts on an anisotropic halfspace, Wear, vol.191, issue.1-2, pp.256-260, 1996.
DOI : 10.1016/0043-1648(95)06687-X

A. Kapoor, Prediction of fatigue crack initiation for rolling contact fatigue, Wear, vol.22, pp.205-215, 2000.

A. Kapoor, Rolling contact fatigue and wear behaviour of the infrastar two-material rail, Wear, vol.258, pp.1048-1054, 2005.

P. Kapsa and M. Et-cartier, Usure des contacts mécaniques ? Problématique et définitions, p.1, 2001.

P. Kapsa and M. Et-cartier, Usure des contacts mécaniques ? Eléments de tribologie, p.1, 2001.

P. Kapsa and M. Et-cartier, Usure des contacts mécaniques ? Manifestations de l'usure, Techniques de l, p.1, 2001.

P. Kapsa and M. Et-cartier, Usure des contacts mécaniques ? Maîtrise de l'usure et du frottement, p.1, 2001.

C. E. Kesler, Effect of speed of testing on flexural fatigue strength of plain concrete, Proceeding of the Highway Research Board, p.32, 1953.

J. K. Kim and Y. Y. Kim, Experimental study of the fatigue behavior of high strength concrete, Cement and Concrete Research, vol.26, issue.10, pp.1513-1523, 1996.
DOI : 10.1016/0008-8846(96)00151-2

K. Knothe and S. Liebelt, Determination of temperatures for sliding contact with applications for wheel-rail systems, Wear, vol.189, issue.1-2, pp.91-99, 1994.
DOI : 10.1016/0043-1648(95)06666-7

K. Knothe and S. L. Grassie, WORKSHOP ON RAIL CORRUGATIONS AND OUT-OF-ROUND WHEELS, Journal of Sound and Vibration, vol.227, issue.5, pp.895-897, 1999.
DOI : 10.1006/jsvi.1999.2053

J. Kozicki and J. Tejchman, Modelling of fracture process in concrete using a novel lattice model, Granular Matter, vol.57, issue.1, pp.377-388, 2008.
DOI : 10.1007/s10035-008-0104-4

L. Borderie and C. , Phénomènes unilatéraux dans un matériau endommageable : Modélisation et Application à l'analyse des structures en béton, Thèse doctorale, 1991.

P. Ladevèze, Sur une théorie de l'endommagement anisotrope, Rapport interne, ENS Cachan, 1983.

R. Lavis, Railway wheel wear predictions with adams/rail, 2002.

R. Lavis, Integrating dynamics and wear modelling to predict railway wheel profile evolution, th International Conference on Contact Mechanics and Wear of Rail-Wheel Systems, 2003.

R. Lavis, A new CAE procedure for railway wheel tribological design, 14th International Wheelset Congress, 2004.

M. K. Lee and B. I. Barr, An overview of the fatigue behaviour of plain and fibre reinforced concrete, Cement and Concrete Composites, vol.26, issue.4, pp.299-305, 2004.
DOI : 10.1016/S0958-9465(02)00139-7

J. Lemaitre and J. L. Et-chaboche, Mécanique des matériaux solides, Dunod, deuxième édition, 2006.

Z. Li, Wheel-rail rolling contact and its application to wear simulation, 2002.

Z. Li, An investigation into the causes of squats???Correlation analysis and numerical modeling, Wear, vol.265, issue.9-10, pp.1349-1355, 2008.
DOI : 10.1016/j.wear.2008.02.037

Z. Li, Squat growth???Some observations and the validation of numerical predictions, th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems, 2009.
DOI : 10.1016/j.wear.2010.10.051

Z. Li, The determination of a critical size for rail top surface defects to grow into squats, th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems, 2009.

B. M. Liaw, Improved Nonlinear Model for Concrete Fracture, Journal of Engineering Mechanics, vol.116, issue.2, p.429, 1990.
DOI : 10.1061/(ASCE)0733-9399(1990)116:2(429)

G. Lilliu and J. G. Et-van-mier, 3D lattice type fracture model for concrete, Engineering Fracture Mechanics, vol.70, issue.7-8, pp.927-941, 2003.
DOI : 10.1016/S0013-7944(02)00158-3

G. Lilliu and J. G. Et-van-mier, On the relative use of micro-mechanical lattice analysis of 3-phase particle composites, Engineering Fracture Mechanics, vol.74, issue.7, pp.1174-1189, 2007.
DOI : 10.1016/j.engfracmech.2006.12.018

O. Y. Liu, B. Zhang, and Z. R. Zhou, An experimental study of rail corrugation, Wear, vol.255, issue.7-12, pp.1121-1126, 2003.
DOI : 10.1016/S0043-1648(03)00213-8

J. Lu, Fatigue des alliages ferreux-définitions et diagrammes

J. Lu, Facteurs d'influence, Techniques de l'ingénieur, p.43

J. Lu, Exemples de calcul, Techniques de l'ingénieur, p.44

J. Lubliner, A plastic-damage model for concrete, International Journal of Solids and Structures, vol.25, issue.3, pp.299-326, 1989.
DOI : 10.1016/0020-7683(89)90050-4

H. Maitournam, Formulation et resolution numérique des problèmes thermoviscoplastiques en regime permanent, Thèse de l'ENPC, 1989.

J. J. Marigo, Modelling of brittle and fatigue damage for elastic material by growth of microvoids, Engineering Fracture Mechanics, vol.21, issue.4, pp.861-874, 1985.
DOI : 10.1016/0013-7944(85)90093-1

A. Matsumoto, Formation mechanism and countermeasures of rail corrugation on curved track, Wear, vol.253, issue.1-2, pp.178-184, 2002.
DOI : 10.1016/S0043-1648(02)00097-2

J. Mazars, Prévision de la rupture des structures en béton par la mécanique de la rupture, Thèse de 3ème cycle université Pierre et Marie Curie, 1976.

J. Mazars, application de la mécanique de l'endommagement au comportement non linéaire et à la rupture du béton de structure, Thèse de l, 1984.

J. Mazars and G. Pijaudier-cabot, From damage to fracture mechanics and conversely: A combined approach, International Journal of Solids and Structures, vol.33, issue.20-22, pp.20-22, 1996.
DOI : 10.1016/0020-7683(96)00015-7

J. T. Mccall, Probability of fatigue failure of plain concrete, ACI journal, pp.221-231, 1958.

P. Meakin, Models for Material Failure and Deformation, Science, vol.252, issue.5003, pp.226-234, 1991.
DOI : 10.1126/science.252.5003.226

P. A. Meehan, Prediction of the growth of wear-type rail corrugation, Wear, vol.258, issue.7-8, pp.1001-1013, 2005.
DOI : 10.1016/j.wear.2004.03.049

H. C. Meng and K. C. Ludema, Wear models and predictive equations: their form and content, Wear, vol.181, issue.183, pp.181-183, 1994.
DOI : 10.1016/0043-1648(95)90158-2

S. Mezlini, Experimental, numerical and analytical studies of abrasive wear: correlation between wear mechanisms and friction coefficient, Comptes Rendus M??canique, vol.333, issue.11, pp.830-837, 2005.
DOI : 10.1016/j.crme.2005.09.005

K. Miled, Effet d'échelle dans le béton léger de polystyrène expansé, pp.189-194, 2005.

M. A. Miner, Cumulative damage in fatigue, J. Applied Mechanics, vol.12, pp.159-164, 1945.

Y. V. Milman, Tribological properties of the surface of railway tracks, studied by indentation technique, Wear, vol.258, issue.1-4, pp.77-82, 2005.
DOI : 10.1016/j.wear.2004.02.017

G. Miroslaw and M. Christian, Damage accumulation in concrete with and without fiber reinforcement, ACI Materials Journal, vol.90, issue.6, 1993.

A. D. Morris and G. G. Garrentt, A comparative study of the static and fatigue behaviour of plain and steel fibre reinforced mortar in compression and direct tension, International Journal of Cement Composites and Lightweight Concrete, vol.3, issue.2, 1981.
DOI : 10.1016/0262-5075(81)90002-6

S. A. Mousavi, Three dimensional numerical analyses of asymmetric rolling, Journal of Materials Processing Technology, vol.187, issue.188, pp.188-725, 2007.
DOI : 10.1016/j.jmatprotec.2006.11.045

B. Mu and S. P. Shah, Fatigue behavior of concrete subjected to biaxial loading in the compression region, Materials and Structures, vol.38, issue.277, pp.289-298, 2005.
DOI : 10.1617/14155

S. Müller, A LINEAR WHEEL???TRACK MODEL TO PREDICT INSTABILITY AND SHORT PITCH CORRUGATION, Journal of Sound and Vibration, vol.227, issue.5, pp.899-913, 1999.
DOI : 10.1006/jsvi.1999.2981

J. W. Murdock and C. E. Kesler, Effects of range of stress on the fatigue strength of plain concrete, ACI journal, 1958.

J. D. Nast, On rolling contact fatigue analysis practice in railway industry: models and applications, ALSTOM Transport, Bogie Design Department

E. L. Nelson, Behavior and failure of high-strength concrete subjected to biaxial cyclic compression loading, ACI Material Journal, 1988.

R. D. Nicholson, The effect of temperature on creep crack propagation in AISI 316 stainless steel, Materials Science and Engineering, vol.22, pp.1-6, 1976.
DOI : 10.1016/0025-5416(76)90129-4

J. B. Nielsen, EVOLUTION OF RAIL CORRUGATION PREDICTED WITH A NON-LINEAR WEAR MODEL, Journal of Sound and Vibration, vol.227, issue.5, pp.915-933, 1999.
DOI : 10.1006/jsvi.1999.2060

J. C. Nielsen, Numerical prediction of rail roughness growth on tangent railway tracks, Journal of Sound and Vibration, vol.267, issue.3, pp.537-548, 2003.
DOI : 10.1016/S0022-460X(03)00713-2

B. H. Oh, Fatigue life distributions of concrete for various stress levels, ACI Journal, pp.88-103, 1991.

K. H. Oostermeijer, Review on short pithch corrugation studies, th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems, 2006.

M. H. Paas, Continuum damage mechanics with an application to fatigue, 1990.

S. J. Pantazopoulou and R. H. Mills, Microstructural aspects of the mechanical response of plain concrete, ACI Journal, pp.92-662, 1995.

E. Papa and A. Taliercio, Anisotropic damage model for the multiaxial static and fatigue behaviour of plain concrete, Engineering Fracture Mechanics, vol.55, issue.2, pp.163-179, 1996.
DOI : 10.1016/0013-7944(96)00004-5

E. Papa, A damage model for concrete subjected to fatigue loading, Eur, J. Mech., A/ Solids, vol.12, issue.3, pp.429-440, 1993.

R. H. Peerling, Enhanced damage modelling for fracture and fatigue, these de doctorat, 1999.

G. Pijaudier-cabot, Non local Damage Theory, The Journal of Engineering Mechanics, vol.113, issue.10, 1987.

O. Polach, A fast wheel-rail forces calculation computer code, The Dynamics of Vehicles on Roads and on Tracks, th IAVSD Symposium, South Africa, 1999.

P. Pointner and L. Donawitz, The impact of wear and rolling contact fatigue on rails ? a pragmatic approach, ZEVrail Glasers Annalen, vol.132, 2008.

A. R. Ponter, Application of the kinematical shakedown theorem to rolling and sliding point contacts, Journal of the Mechanics and Physics of Solids, vol.33, issue.4, pp.339-362, 1985.
DOI : 10.1016/0022-5096(85)90033-X

A. R. Ponter, Shakedown analyses for rolling and sliding contact problems, International Journal of Solids and Structures, vol.43, issue.14-15, pp.4201-4219, 2006.
DOI : 10.1016/j.ijsolstr.2005.05.046

E. Rabinowicz, Friction and Wear of Materials, Journal of Applied Mechanics, vol.33, issue.2, p.315, 1965.
DOI : 10.1115/1.3625110

S. Ramtani, Contribution à la modélisation du comportement multiaxial du béton endommagé avec description du caractère unilatéral, Thèse de Doctorat d'Etat, 1990.

H. W. Reinhardt, Post-peak cyclic behaviour of concrete in uniaxial tensile and alternating tensile and compressive loading, Cement and Concrete Research, vol.14, issue.2, pp.263-270, 1984.
DOI : 10.1016/0008-8846(84)90113-3

H. Reinhardt, Crack softening zone in plain concrete under static loading, Cement and Concrete Research, vol.15, issue.1, pp.42-52
DOI : 10.1016/0008-8846(85)90007-9

C. E. Richards and T. C. Lindley, The influence of stress intensity and microstructure on fatigue crack propagation in ferritic materials, Engineering Fracture Mechanics, vol.4, issue.4, pp.951-978, 1972.
DOI : 10.1016/0013-7944(72)90028-8

J. W. Ringsberg, Prediction of fatigue crack initiation for rolling contact fatigue, International Journal of Fatigue, vol.22, issue.3, pp.205-215, 2000.
DOI : 10.1016/S0142-1123(99)00125-5

J. W. Ringsberg and T. Et-lindback, Rolling contact fatigue analysis of rails inculding numerical simulations of the rail manufacturing process and repeated wheel-rail contact loads, International Journal of Fatigue, vol.25, issue.6, pp.547-558, 2003.
DOI : 10.1016/S0142-1123(02)00147-0

P. E. Roelfstra and F. H. Wittmann, Numerical method to link strain softening with failure of concrete, Fracture toughness and fracture energy of concrete, 1986.

K. Sab and I. Et-laalai, Une approche unifiée des effets d'échelle dans les matériaux quasi fragiles, C.R

T. Sain, C. Kishen, and J. M. , Residual fatigue strength assessment of concrete considering tension softening behavior, International Journal of Fatigue, vol.29, issue.12, pp.2138-2148, 2007.
DOI : 10.1016/j.ijfatigue.2007.01.011

M. Saito and S. Et-imai, Direct tensile fatigue of concrete by the use of friction grips, ACI Journal, pp.80-122, 1983.

M. Saito, Characteristics of microcracking in concrete under static and repeated tensile loading, Cement and Concrete Research, vol.17, issue.2, pp.211-218, 1987.
DOI : 10.1016/0008-8846(87)90104-9

Y. Sato, A. Matsumoto, and K. Knothe, Review on rail corrugation studies, Wear, vol.253, issue.1-2, pp.130-139, 2002.
DOI : 10.1016/S0043-1648(02)00092-3

F. C. Santos, Evaluation of subsurface contact stresses in railroad wheels using an elastic halfspace model, J. of the Braz. Soc. Of Mech. Sci. and Eng, vol.26, issue.4, 2004.

A. Saulot, Analyse tribologique du contact roue-rail, Modélisation et expérimentations ? Cas de l'usure ondulatoire, Thèse de l'INSA, 2005.

E. Schlangen and J. G. Van-mier, Simple lattice model for numerical simulation of fracture of concrete materials and structures, Materials and Structures, vol.23, issue.3, pp.534-542, 1992.
DOI : 10.1007/BF02472449

E. Schlangen, Experimental and numerical analysis of fracture processes in concrete. Heron, 1993.

G. E. Schlangen, New method for simulating fracture using an elastically uniform random geometry lattice, International Journal of Engineering Science, vol.34, issue.10, pp.1131-1144, 1996.
DOI : 10.1016/0020-7225(96)00019-5

G. E. Schlangen, Fracture simulations of concrete using lattice models: Computational aspects, Engineering Fracture Mechanics, vol.57, issue.2-3, pp.319-332, 1997.
DOI : 10.1016/S0013-7944(97)00010-6

A. L. Schwab and J. P. Meijaard, Two special finite elements for modelling rolling contact in a multibody environment, The first Asian Conference on Multibody Dynamics, 2002.

J. C. Simo and J. W. Ju, Strain- and stress-based continuum damage models???I. Formulation, International Journal of Solids and Structures, vol.23, issue.7, pp.821-840, 1987.
DOI : 10.1016/0020-7683(87)90083-7

J. C. Sinclair and M. B. Allery, P, Developpement of a failure parameter for rail squats, 1991.

Z. Y. Shen, J. K. Hedrick, and J. A. Elkins, A Comparison of Alternative Creep Force Models for Rail Vehicle Dynamic Analysis, Proc. Of 8 th IASVD Symposium, 1983.
DOI : 10.1080/00423118308968725

X. Sheng, Simulations of roughness initiation and growth on railway rails, Journal of Sound and Vibration, vol.293, issue.3-5, 2006.
DOI : 10.1016/j.jsv.2005.08.050

X. Sheng, M. Li, C. L. Jones, and D. J. Thompson, Using the Fourier-series approach to study interactions between moving wheels and a periodically supported rail, Journal of Sound and Vibration, vol.303, issue.3-5, pp.873-894, 2007.
DOI : 10.1016/j.jsv.2007.02.007

I. Y. Shevtsov, Optimal design of wheel profile for railway vehicles, presented at the 6 th international conference on contact mechanics and wear of rail-wheel systems, 2003.

X. P. Shi, T. F. Fwa, and S. A. Tan, Flexural fatigue strength of plain concrete, ACI Journal

B. Soua, Etude de l'usure et de l'endommagement du roulement ferroviaire avec des modèles d'essieux non-rigides, 1997.

W. R. Sperr, A PHENOMENOLOGICAL APPROACH TO FATIGUE CRACK GROWTH RATE PREDICTION, Adv. Res. Struct
DOI : 10.1016/B978-0-08-022140-3.50057-4

N. J. Stevens, S. M. Uzumeri, and M. P. Et-collins, Reinforced concrete subjected to reversed cyclic shear- Experiments and Constitutive model, ACI Journal, pp.88-104, 1991.

E. C. Su and T. T. Hsu, Biaxial Compression fatigue and the discontinuity of concrete, Material Journal of the American Concrete Institute, vol.85, issue.3, pp.178-188, 1988.

K. V. Subramaniam and S. P. Shah, Biaxial tension fatigue response of concrete, Cement and Concrete Composites, vol.25, issue.6, pp.617-623, 2003.
DOI : 10.1016/S0958-9465(02)00075-6

Y. Suda, Study on rail corrugation in sharp curves of commuter line, Wear, vol.253, issue.1-2, 2002.
DOI : 10.1016/S0043-1648(02)00099-6

N. Suh, Micropic Observations of wear sheet formation by delamination, Wear, vol.28, pp.235-249, 1974.

A. M. Sullivan and T. W. Et-crooker, Analysis of Fatigue-Crack Growth in a High-Strength Steel???Part I: Stress Level and Stress Ratio Effects at Constant Amplitude, Journal of Pressure Vessel Technology, vol.98, issue.2, 1976.
DOI : 10.1115/1.3454357

A. L. Taliercio and E. Gobbi, Experimental investigation on the triaxial fatigue fatigue behaviour of plain concrete, Magazine of concrete research, pp.157-172, 1996.

A. L. Taliercio and E. Gobbi, Fatigue life and change in mechanical properties of plain concrete under triaxial deviatoric cuclic stresses, Magazine of concrete research, pp.247-255, 1998.

E. Tassilly and N. Vincent, A linear model for the corrugation of rails, Journal of Sound and Vibration, vol.150, issue.1, pp.25-45, 1991.
DOI : 10.1016/0022-460X(91)90400-E

E. Tassilly and N. Vincent, Rail corrugations: analytical model and field tests, Wear, vol.144, issue.1-2, pp.163-178, 1991.
DOI : 10.1016/0043-1648(91)90013-K

T. Telliskivi and U. Olofsson, Wheel???rail wear simulation, Wear, vol.257, issue.11, pp.1145-1153, 2004.
DOI : 10.1016/j.wear.2004.07.017

T. Telliskivi, A tool and a method for FE analysis of wheel and rail interaction, Royal Institute of Technology (KTH), 2000.

D. J. Thompson and J. W. Verheij, A double Timoshenko beam model for vertical vibration analysis of railway track et high frequencies, Journal of Sound and Vibration, vol.224, issue.2, pp.329-348, 1999.

J. Van-mier, E. Schlangen, and A. Vervuurt, Lattice type fracture models for concrete, Continuum Models for Materials, pp.341-377, 1995.

J. G. Van-mier and M. R. Van-vliet, Influence of microstructure of concrete on size/scale effects in tensile fracture, Engineering Fracture Mechanics, vol.70, issue.16, pp.2281-2396, 2003.
DOI : 10.1016/S0013-7944(02)00222-9

V. Vliet and M. , Size effect in tensile fracture of concrete and rock, 2000.

P. J. Vermeulen and J. K. , Contact of non-spherical elastic bodies transmitting tangential forces, Tans. ASME, Series E Journal of Applied Mechanics, pp.31-338, 1964.

A. Vervuurt, Interface fracture in concrete, 1997.

M. Wiest, Assessment of methods for calculating contact pressure in wheel-rail/switch contact, th International Conference on Contact Mechanics and Wear of Rail-Wheel Systems, 2006.
DOI : 10.1016/j.wear.2008.02.039

J. A. Williams, Wear modelling: analytical, computational and mapping: a continuum mechanics approach, Wear, vol.225, issue.229, pp.225-229, 1999.
DOI : 10.1016/S0043-1648(99)00060-5

T. X. Wu and D. J. Thompson, The Dynamic behaviour of rail fasteners at high frequencies, 1997.

T. X. Wu and D. J. Thompson, An investigation into rail corrugation due to micro-slip under multiple wheel-rail interactions, ISVR, 2002.

L. Xiao, The influence of surface roughness and the contact pressure distribution on friction in rolling/sliding contacts, Tribology International, vol.40, issue.4, pp.694-698, 2007.
DOI : 10.1016/j.triboint.2005.11.021

D. Yang, A distribution function for the fatigue life of concrete, Magazine of concrete research, pp.215-221, 1994.

M. Zacher, Prediction of gauge corner cracking in rails for rail maintenance

B. Zhang, D. V. Phillips, and K. Wu, Effects of loading frequency and stress reversal on fatigue life of plain concrete, Magazine of concrete research, pp.361-375, 1996.

B. Zhang, D. V. Phillips, and K. Wu, Further research on fatigue properties of plain concrete, Magazine of concrete research, pp.241-252, 1997.

J. Zhang and K. Knothe, Statistical linearization of wheel/rail contact nonlinearities for investigation of curving behavior with random track irregularities, Vehicle System Dynamics, vol.25

J. Zhang, Fatigue life prediction of fiber reinforced concrete under flexural load, International Journal of Fatigue, vol.21, issue.10, pp.1033-1049, 1999.
DOI : 10.1016/S0142-1123(99)00093-6