A. A. Afrouz, Practical handbook of rock mass classification systems and modes of ground failure, 0195.

A. A. Afrouz, F. P. Hassani, and E. R. Ucar, Stability analysis of steep rock slopes, Revue canadienne de géotechnique, pp.595-603, 1989.

P. Alm, Hydro-mechanical behavior of a pressurized single fracture: an in situ experiment, 1999.

B. Amadei and S. Saeb, Constitutive models for rock joints, Proc. of the Int. Conf. on Rock Joints, pp.581-594, 1990.

C. Arson and B. Gatmiri, On damage modelling in unsaturated clay rocks, Physics and Chemistry of the Earth, Parts A/B/C, vol.33, pp.407-415, 2008.
DOI : 10.1016/j.pce.2008.10.006

URL : https://hal.archives-ouvertes.fr/hal-00518475

B. K. Atkinson, Introduction to fracture mechanics and its geophysical applications, in Fracture Mechanics of Rocks, pp.1-26, 1987.

T. Backers, Fracture toughness determination and micromechanics of rock under Mode I and Mode II loading, 2004.

F. Baillifard, M. Jaboyedoff, and J. Rouiller, Towards a GIS-based rockfall hazard assessment along the Quebec City Promontory, Quebec, Canada, Landslides: Evaluation and Stabilization, pp.207-213, 2004.
DOI : 10.1201/b16816-28

S. C. Bandis, Experimental studies of scale effect on shear strength and deformation of rock joints, p.pp, 1980.

S. C. Bandis, A. C. Lumsden, and N. R. Barton, Experimental studies of scale effects on the shear behaviour of rock joints, International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, vol.18, issue.1, pp.1-21, 1981.
DOI : 10.1016/0148-9062(81)90262-X

S. C. Bandis, A. C. Lumsden, and N. R. Barton, Fundamentals of rock joint deformation, International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, vol.20, issue.6, pp.249-268, 1983.
DOI : 10.1016/0148-9062(83)90595-8

G. I. Barenblatt, The Mathematical Theory of Equilibrium Cracks in Brittle Fracture, Adv. Appl. Mech, vol.7, pp.55-129, 1962.
DOI : 10.1016/S0065-2156(08)70121-2

F. Barpi and S. Valente, Modeling water penetration at dam-foundation joint, Engineering Fracture Mechanics, vol.75, issue.3-4, pp.629-642, 2008.
DOI : 10.1016/j.engfracmech.2007.02.008

URL : http://porto.polito.it/2288333/1/59135_UPLOAD.pdf

B. Barr and M. Derradj, Numerical study of a shear (mode II) type test specimen geometry, Engineering Fracture Mechanics, vol.35, issue.1-3, pp.171-180, 1990.
DOI : 10.1016/0013-7944(90)90194-L

N. Barton, A relationship between joint roughness and joint shear strength, Proc. Int. Symp. Rock Mech, 1971.

N. Barton, Review of a new shear-strength criterion for rock joints, Engineering Geology, vol.7, issue.4, pp.287-332, 1973.
DOI : 10.1016/0013-7952(73)90013-6

N. Barton, Estimating the shear strength of rock joint Advances in Rock Mechanics; II A, pp.219-220, 1974.

N. R. Barton, R. Lien, and J. Lunde, Engineering classification of rock masses for the design of tunnel support, Rock Mechanics Felsmechanik M???canique des Roches, vol.1, issue.1, pp.189-239, 1974.
DOI : 10.1007/BF01239496

N. Barton, The shear strength of rock and rock joints, International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, vol.13, issue.9, pp.255-279, 1976.
DOI : 10.1016/0148-9062(76)90003-6

N. Barton and V. Choubey, The shear strength of rock joints in theory and practice, Rock mechanics, 1977.

N. Barton, Modelling rock joint behaviour from in situ block tests: implications for nuclear waste repository design. Office of Nuclear Waste Isolation, p.pp, 1982.

N. Barton and S. C. Bandis, Effect of block size on the behaviour of jointed rock, Proc. 23 rd U.S. Symp. On rock mechanics, pp.739-760, 1982.

N. R. Barton, S. Bandis, and K. Bakhtar, Strength, deformation and conductivity coupling of rock joints, International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, vol.22, issue.3, pp.121-140, 1985.
DOI : 10.1016/0148-9062(85)93227-9

N. Barton and E. F. De-quadros, Joint aperture and roughness in the prediction of flow and groutability of rock masses, International Journal of Rock Mechanics and Mining Sciences, vol.34, issue.3-4, 1997.
DOI : 10.1016/S1365-1609(97)00081-6

Z. P. Bazant, K. , and S. S. , Plastic-fracturing theory for concrete, J. Engrg. Mech. ASCE, vol.105, issue.3, pp.407-421, 1979.

Z. P. Bazant, Concrete fracture models: testing and practice, Engineering Fracture Mechanics, vol.69, issue.2, pp.165-205, 2002.
DOI : 10.1016/S0013-7944(01)00084-4

B. Yazdi and P. Cesar-lcpc, Cahier de développement, version Recherche ? Famille 16 (Eléments joints) Modèle élasto-plastique de type Mohr-Coulomb et Modèle endommagement-plastique, 2009.

B. Yazdi, P. Pouya, and A. , A Coupled Normal-Shear Damage Model for Rock Joint Elements, the, ISRM-Sponsored International Symposium (5th Asian Rock Mechanics Symposium, pp.24-26, 2008.

B. Yazdi, P. Pouya, and A. , Modelling of cyclic behaviour of rock joints with a coupled damage-plastic interface element, International Conference on Rock Joints and Jointed Rock Masses, pp.4-11, 2009.

B. Berkowitz, Characterizing flow and transport in fractured geological media: A review, Advances in Water Resources, vol.25, issue.8-12, pp.861-884, 2002.
DOI : 10.1016/S0309-1708(02)00042-8

R. Bhasin and A. M. Kaynia, Static and dynamic simulation of a 700-m high rock slope in western Norway, Engineering Geology, vol.71, issue.3-4, pp.213-226, 2004.
DOI : 10.1016/S0013-7952(03)00135-2

Z. T. Bieniawski, Engineering classification of jointed rock masses, Trans S. Afr. Inst. Civ. Engrs, vol.15, pp.335-344, 1973.

Z. T. Bieniawski, Geomechanics classification of rock masses and its application in tunnelling, Advances in Rock Mechanics 2.: National Academy of Sciences, pp.27-32, 1974.

M. A. Biot, General Theory of Three???Dimensional Consolidation, Journal of Applied Physics, vol.12, issue.2, pp.155-164, 1941.
DOI : 10.1063/1.1712886

URL : https://hal.archives-ouvertes.fr/hal-01368635

M. A. Brideau, M. Yan, and D. Stead, The role of tectonic damage and brittle rock fracture in the development of large rock slope failures, Geomorphology, vol.103, issue.1, pp.30-49, 2009.
DOI : 10.1016/j.geomorph.2008.04.010

G. Bolzon and G. Cocchetti, Direct assessment of structural resistance against pressurized fracture, International Journal for Numerical and Analytical Methods in Geomechanics, vol.61, issue.5, pp.353-378, 2003.
DOI : 10.1002/nag.276

N. Burlion, F. Gatuingt, G. Pijaudier-cabot, and L. Daudeville, Compaction and tensile damage in concrete: constitutive modelling and application to dynamics, Computer Methods in Applied Mechanics and Engineering, vol.183, issue.3-4, pp.291-308, 2000.
DOI : 10.1016/S0045-7825(99)00223-6

URL : https://hal.archives-ouvertes.fr/hal-01005864

M. Cai, P. K. Kaiser, H. Uno, Y. Tasaka, and M. Minami, Estimation of rock mass deformation modulus and strength of jointed hard rock masses using the GSI system, International Journal of Rock Mechanics and Mining Sciences, vol.41, issue.1, pp.3-19, 2004.
DOI : 10.1016/S1365-1609(03)00025-X

I. Carol, P. C. Prat, and C. M. López, Normal/Shear Cracking Model: Application to Discrete Crack Analysis, Journal of Engineering Mechanics, vol.123, issue.8, pp.765-773, 1997.
DOI : 10.1061/(ASCE)0733-9399(1997)123:8(765)

I. Carol, C. M. Lopez, and O. Roa, Micromechanical analysis of quasi???brittle materials using fracture???based interface elements, International Journal for Numerical Methods in Engineering, vol.1, issue.12, pp.193-215, 2001.
DOI : 10.1002/nme.277

A. Carpinteri and . Ferro, Size effects on tensile fracture properties: a unified explanation based on disorder and fractality of concrete microstructure, Materials and Structures, vol.4, issue.10, pp.563-571, 1994.
DOI : 10.1007/BF02473124

M. Castelli, Studio della rotture progressive di structure in roccia mediante un approccio di mecanica delle frattura, 1998.

M. Castelli and C. Scavia, Fracture mechanics approach to the study of failure in rock, Revue Fran??aise de G??nie Civil, vol.7, issue.7, pp.653-682, 2004.
DOI : 10.1086/318605

D. S. Cavers, Simple methods to analyze buckling of rock slopes, Rock Mech, pp.87-104, 1981.

M. Cerrolaza and R. Garcia, Boundary elements and damage mechanics to analyze excavations in rock mass, Engineering Analysis with Boundary Elements, vol.20, issue.1, pp.1-16, 1997.
DOI : 10.1016/S0955-7997(97)00029-5

J. Cervenka, J. M. Kishen, and V. E. Saouma, Mixed mode fracture of cementitious bimaterial interfaces, Engineering Fracture Mechanics, vol.60, issue.1, pp.95-107, 1998.
DOI : 10.1016/S0013-7944(97)00094-5

J. L. Chaboche, Anisotropic creep damage in the framework of continuum damage mechanics, Nuclear Engineering and Design, vol.79, issue.3, pp.309-319, 1984.
DOI : 10.1016/0029-5493(84)90046-3

M. Chalhoub, Apports des méthodes d'homogénéisation numérique sur la classification des Massifs Rocheux Fracturés, 2006.

C. Kishen, J. M. , and V. E. Saouma, Fracture of Rock-Concrete Interfaces: Laboratory Tests and Applications, ACI Structural Journal, vol.101, pp.325-331, 2004.

T. R. Chandrupatla and A. D. Belegundu, Introduction to finite elements in engineering, 1991.

W. F. Chen, Limit analysis and soil plasticity, Development in Geotechnical Engineering, vol.7, issue.638, p.pp, 1975.

C. Clément, Auscultation d'un versant rocheux soumis aux sollicitations thermiques naturelles. Cas des Rochers de Valabres (Alpes-Maritimes, thèse de doctorat de L'I.N.P.L., ENSM de, 2008.

C. Comi, A non-local model with tension and compression damage mechanisms, European Journal of Mechanics - A/Solids, vol.20, issue.1, pp.1-22, 2001.
DOI : 10.1016/S0997-7538(00)01111-6

C. A. Coulomb, Remarque sur la rupture des corps, Mémoire présenté par divers savants à l'Académie, 1776.

G. B. Crosta and F. Agliardi, A methodology for physically based rockfall hazard assessment, Natural Hazards and Earth System Science, vol.3, issue.5, pp.407-422, 2003.
DOI : 10.5194/nhess-3-407-2003

URL : https://hal.archives-ouvertes.fr/hal-00301598

P. A. Cundall, A computer model for simulating progressive large scale movements in blocky rock systems, In Rock Mechanics: proc, Proc. 2, pp.129-136, 1971.

J. Davies, Numerical study of punch-through shear specimen in mode II testing for cementitious materials, International Journal of Cement Composites and Lightweight Concrete, vol.10, issue.1, pp.3-14, 1988.
DOI : 10.1016/0262-5075(88)90017-6

J. Davies, Study of shear fracture in mortar specimens, Cement and Concrete Research, vol.25, issue.5, pp.1031-1042, 1995.
DOI : 10.1016/0008-8846(95)00098-W

M. S. Diederichs and P. K. Kaiser, Tensile strength and abutment relaxation as failure control mechanisms in underground excavations, International Journal of Rock Mechanics and Mining Sciences, vol.36, issue.1, pp.69-96, 1999.
DOI : 10.1016/S0148-9062(98)00179-X

A. Dragon and Z. Mroz, A continuum model for plastic-brittle behaviour of rock and concrete, International Journal of Engineering Science, vol.17, issue.2, pp.121-137, 1979.
DOI : 10.1016/0020-7225(79)90058-2

D. S. Dugadal, Yielding of steel sheets containing slits, Journal of the Mechanics and Physics of Solids, vol.8, issue.2, pp.100-104, 1960.
DOI : 10.1016/0022-5096(60)90013-2

E. Eberhardt, Rock slope stability analysis ? utilisation of advanced numerical techniques, Geological Engineering/Earth end Ocean Science, vol.41, 2003.

E. Eberhardt, D. Stead, J. S. Coggan, and H. Willenberg, Hybrid finite-/discreteelement modelling of progressive failure in massive rock slopes. ISRM 2003? Technology roadmap for rock mechanics, pp.275-279, 2003.

E. Eberhardt, D. Steadb, and J. S. Coggan, Numerical analysis of initiation and progressive failure in natural rock slopes???the 1991 Randa rockslide, International Journal of Rock Mechanics and Mining Sciences, vol.41, issue.1, pp.69-87, 2004.
DOI : 10.1016/S1365-1609(03)00076-5

H. H. Einstein, Risk and risk analysis in rock engineering, Tunnelling and Underground Space Technology, vol.11, issue.2, 1995.
DOI : 10.1016/0886-7798(96)00014-4

H. H. Einstein, D. Veneziano, G. B. Baecher, and K. J. O-'reilly, The effect of discontinuity persistence on rock slope stability. International journal of rock mechanics and mining sciences, pp.5-227, 1983.

R. J. Fowell, Suggested method for determining mode I fracture toughness using Cracked Chevron Notched Brazilian Disc (CCNBD) specimens, International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, vol.32, issue.1, pp.57-64, 1995.
DOI : 10.1016/0148-9062(94)00015-U

A. Fouladvand, Modelisation de Comportement des massifs Rocheux par les éléments joints, Projet d'Initiation à la recherche du Master Recherche MSROE de l'ENPC, 2007.

M. Frayssines, Contribution à l'évaluation de l'aléa éboulement rocheux (rupture), thèse de doctorat, l'université Joseph Fourier -Grenoble I, 2005.

M. Frayssines and D. Hantz, Failure mechanisms and triggering factors in calcareous cliffs of the Subalpine Ranges (French Alps), Engineering Geology, vol.86, issue.4, pp.256-270, 2006.
DOI : 10.1016/j.enggeo.2006.05.009

URL : https://hal.archives-ouvertes.fr/hal-00337774

J. C. Galvez, J. Cervenka, D. A. Cendon, and V. Saouma, A discrete crack approach to normal/shear cracking of concrete, Cement and Concrete Research, vol.32, issue.10, pp.1567-1585, 2002.
DOI : 10.1016/S0008-8846(02)00825-6

R. E. Goodman, R. L. Taylor, and T. Brekke, A model for the mechanics of jointed rock, J. soil Mech. Fdns. Div., Proc. Am. Soc. Civ. Engrs, issue.SM3, pp.94-637, 1968.

R. E. Goodman, Methods of Geological Engineering in discontinuous rock, p.472, 1976.

R. E. Goodman and J. W. Bray, Toppling of rock slopes, Proc.Specialty Conf. on Rock Engrg. for Foundations and Slopes, pp.201-234, 1977.

R. E. Goodman and G. H. Shi, Block theory and its applicationsto rock engineering, 1985.

R. E. Goodman, Introduction to rock mechanics, 1989.

R. E. Goodman, The 35th Rankine Lecture ? Block theory and its application, pp.45-381, 1995.

R. E. Goodman and D. S. Kieffer, Behavior of Rock in Slopes, Journal of Geotechnical and Geoenvironmental Engineering, vol.126, issue.8, pp.675-684, 2000.
DOI : 10.1061/(ASCE)1090-0241(2000)126:8(675)

A. A. Griffith, The phenomena of rupture and flow in solids, Philosophical Transaction of the, pp.163-198, 1921.

Y. Gunzburger, Rôle de la thermique dans la prédisposition, la préparation et le déclenchement des mouvements de versants complexes Exemple des Rochers de Valabres (Alpes-Maritimes), 2004.

H. Hakami and O. Stephansson, Shear fracture energy of Stripa granite- results of controlled triaxial testing, Engineering Fracture Mechanics, vol.35, issue.4-5, pp.855-865, 1990.
DOI : 10.1016/0013-7944(90)90170-L

T. R. Harper and N. C. Last, Interpretation by numerical modeling of changes of fracture system hydraulic conductivity induced by injection, Geotechnique, pp.1-11, 1989.

J. M. Hervouet, A. Et, and . Petitjean, Malpasset dam-break revisited with two-dimensional computations, Journal of Hydraulic Research, vol.37, issue.6, pp.777-788, 1999.
DOI : 10.1016/0045-7825(82)90071-8

A. Hillerborg, M. Modeer, and P. E. Petersson, Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements, Cement and Concrete Research, vol.6, issue.6, pp.773-782, 1976.
DOI : 10.1016/0008-8846(76)90007-7

E. Hoek, Strength of jointed rock masses, G??otechnique, vol.33, issue.3, pp.187-223, 1983.
DOI : 10.1680/geot.1983.33.3.187

E. Hoek, Strength of rock and rock masses, ISRM News Journal, vol.2, issue.2, pp.4-16, 1994.
DOI : 10.1201/b16978-9

E. Hoek and J. W. Bray, Rock Slope Engineering, The Institution of Mining and Metallurgy, 1977.

E. Hoek and E. T. Brown, Underground Excavations in Rock, Instn Min. Metall, vol.527, 1980.

E. Hoek and E. T. Brown, The Hoek-Brown failure criterion ? a 1988 update, Rock engineering forunderground excavations, proc. 15th Canadian rock mech. Symp, pp.31-38, 1988.

E. Hoek and E. T. Brown, Practical estimates of rock mass strength, International Journal of Rock Mechanics and Mining Sciences, vol.34, issue.8, pp.1165-1186, 1997.
DOI : 10.1016/S1365-1609(97)80069-X

E. Hoek and M. S. Diederichs, Empirical estimation of rock mass modulus, International Journal of Rock Mechanics and Mining Sciences, vol.43, issue.2, pp.43-203, 2006.
DOI : 10.1016/j.ijrmms.2005.06.005

X. Huang, B. C. Haimson, M. E. Plesha, and X. Qiu, An investigation of the mechanics of rock joints???Part I. Laboratory investigation, International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, vol.30, issue.3, pp.257-269, 1993.
DOI : 10.1016/0148-9062(93)92729-A

J. A. Hudson, Rock Mechanics Principles in Engineering Practice, p.72, 1989.

J. A. Hudson and J. P. Harrison, Engineering Rock Mechanics: An Introduction to the Principles, Applied Mechanics Reviews, vol.55, issue.2, 1997.
DOI : 10.1115/1.1451165

P. Humbert, A. Dubouchet, G. Fezans, and D. Remaud, CESAR-LCPC un progiciel de calcul dédié au génie civil, Bulletin des laboratoires des ponts et chaussées, pp.256-257, 2005.

O. Hungr and S. G. Evans, Engineering evaluation of fragmental rockfall hazards, Proceedings 5th International Symposium on Landslides, pp.685-690, 1988.

R. W. Hutson, Preparation of duplicate rock joints and their changing dilatancy under cyclic shear, 1987.

C. E. Inglis, Stress in a plate due to the presence of crack and sharp corners, Transaction of the Royale Institution of Naval Architect, pp.219-241, 1913.

A. R. Ingraffea, Mixed Mode fracture initiation in Indiana limestone and Westerly granite, Proc. 22nd US Symp. Rock Mech, pp.186-191, 1981.

A. R. Ingraffea, Theory of crack initiation and propagation in rock, in Fracture Mechanics of Rocks, pp.1-26, 1987.

G. R. Irwin, Analysis of stress and strains near the end of a crack traversing a plate, Journal of Appl. Mech, vol.24, issue.3, pp.361-364, 1957.

K. Iwai, Fundamental studies of fluid flow through a single fracture, 1976.

. Itasca, Linking Itasca codes: Interactive analysis of coupled 3D problems, Itasca Consulting Group, 1999.

. Itasca, UDEC Manual, version 4.00; Special Features, 2004.

A. D. Jefferson and N. R. Mills, Fracture and shear properties of concrete construction joints from core samples, Materials and Structures, vol.35, issue.1, pp.595-60, 1998.
DOI : 10.1016/0013-7944(90)90194-L

A. D. Jefferson, Plastic-Damage Model for Interfaces in Cementitious Materials, Journal of Engineering Mechanics, vol.124, issue.7, pp.775-782, 1998.
DOI : 10.1061/(ASCE)0733-9399(1998)124:7(775)

A. D. Jefferson, Tripartite Cohesive Crack Model, Journal of Engineering Mechanics, vol.128, issue.6, pp.644-653, 2002.
DOI : 10.1061/(ASCE)0733-9399(2002)128:6(644)

M. Jirásek and B. Patzák, Consistent tangent stiffness for nonlocal damage models, Computers & Structures, vol.80, issue.14-15, pp.1279-1293, 2002.
DOI : 10.1016/S0045-7949(02)00078-0

M. Jirásek, S. Rolshoven, and P. Grassl, Size effect on fracture energy induced by non-locality, International Journal for Numerical and Analytical Methods in Geomechanics, vol.28, issue.78, pp.653-670, 2004.
DOI : 10.1002/nag.364

L. Jing, Numerical modelling of jointed rock masses by distinct element method for two and three-dimensional problems, p.22690, 1990.

L. Jing, O. Stephansson, and E. Nordlund, Study of rock joints under cyclic loading conditions, Rock Mechanics and Rock Engineering, vol.11, issue.3, pp.215-247, 1993.
DOI : 10.1007/BF01040116

L. Jing and O. Stephansson, Fundamentals of Discrete Element Methods for Rock Engineering: Theory and Applications, Developments in Geotechnical Engineering, vol.85, 2007.

J. W. Ju, On energy-based coupled elastoplastic damage theories: Constitutive modeling and computational aspects, International Journal of Solids and Structures, vol.25, issue.7, pp.803-833, 1989.
DOI : 10.1016/0020-7683(89)90015-2

A. R. Jumikis, Rock Mechanics Series on rock and soil mechanics, Trans. Tech. Publ, pp.216-219, 1979.

L. M. Kachanov, Rupture time under creep condition, Izv. Acad. Nauk SSSR, OTN, vol.8, pp.26-31, 1958.

L. M. Kachanov, Introduction to continuum damage mechanics, Martinus Nijhoff Dordrecht, The Netherlands, 1986.

J. Kemeny, The Time-Dependent Reduction of Sliding Cohesion due to Rock Bridges Along Discontinuities: A Fracture Mechanics Approach, Rock Mechanics and Rock Engineering, vol.36, issue.1, pp.27-38, 2003.
DOI : 10.1007/s00603-002-0032-2

J. Kemeny, Time-dependent drift degradation due to the progressive failure of rock bridges along discontinuities, International Journal of Rock Mechanics and Mining Sciences, vol.42, issue.1, pp.35-46, 2005.
DOI : 10.1016/j.ijrmms.2004.07.001

J. Kemeny and N. G. Cook, Effective moduli, non-linear deformation and strength of a cracked elastic solid, International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, vol.23, issue.2, pp.107-118, 1986.
DOI : 10.1016/0148-9062(86)90337-2

D. S. Kieffer, Rock slumping ? A compound failure mode of jointed hard rock slopes, 1998.

J. Krahn, The 2001 R.M. Hardy Lecture: The limits of limit equilibrium analyses, Canadian Geotechnical Journal, vol.40, issue.3, pp.643-660, 2003.
DOI : 10.1139/t03-024

B. Ladanyi and G. Archambault, Simulation of shear behaviour of a jointed rock mass, Proc. 11th Symposium on rock mechanics, 1969.

J. Lee and G. L. Fenves, Plastic-Damage Model for Cyclic Loading of Concrete Structures, Journal of Engineering Mechanics, vol.124, issue.8, pp.892-900, 1998.
DOI : 10.1061/(ASCE)0733-9399(1998)124:8(892)

H. S. Lee, Y. J. Park, T. F. Cho, and K. H. You, Influence of asperity degradation on the mechanical behavior of rough rock joints under cyclic shear loading, International Journal of Rock Mechanics and Mining Sciences, vol.38, issue.7, pp.967-980, 2001.
DOI : 10.1016/S1365-1609(01)00060-0

J. Lemaitre and J. L. Et-chaboche, Mécanique des matériaux solides, deuxième édition: Dunod, 2004.

J. Lemaitre and R. Desmorat, Engineering damage mechanics, 2005.

E. Lérot, F. Pontarollo, J. Gascuel, M. Gascuel, and M. Bour, Development of a 3D model for rock-fall trajectories, based on synthetic imagery and stress-deformation laws, 7th International Symposium on Landslides, 1996.

A. Litewka and J. Debinski, Load-induced oriented damage and anisotropy of rock-like materials, International Journal of Plasticity, vol.19, issue.12, pp.2171-2191, 2003.
DOI : 10.1016/S0749-6419(03)00064-0

P. Londe and F. Sabarly, La distribution des permeabilites dans la fondation des barrages voutes en fonction du champ de contrainte, Proc 1 st Int Congr Rock Mechanics, pp.517-522, 1966.

P. Lopez, Comportement mécanique d'une fracture en cisaillement : Analyse par plan d'expériences des données mécaniques et morphologiques connues sur une fracture, Thèse de doctorat, 2000.
DOI : 10.1522/12127341

H. R. Lotfi and P. B. Shing, Interface Model Applied to Fracture of, Masonry Structures Journal of Structural Engineering, vol.120, issue.1, pp.63-80, 1994.

J. Lubliner, J. Oliver, S. Oller, and E. Oñate, A plastic-damage model for concrete, International Journal of Solids and Structures, vol.25, issue.3, pp.299-326, 1989.
DOI : 10.1016/0020-7683(89)90050-4

B. Luccioni, S. Oller, and R. Danesi, Coupled plastic-damaged model, Computer Methods in Applied Mechanics and Engineering, vol.129, issue.1-2, pp.1-2, 1996.
DOI : 10.1016/0045-7825(95)00887-X

A. Makurat, N. Barton, and N. Rad, Joint conductivity variation due to normal and shear deformation Rock joints, pp.535-540, 1990.

J. Mazars, Mechanical damage and fracture of concrete structures, Advanced in Fracture Res., 5 th Intern. Conf. Fracture, 1981.

S. Melin, Why are crack paths in concrete and mortar different from those in PMMA?, Materials and Structures, vol.39, issue.5, pp.23-27, 1989.
DOI : 10.1007/BF02472691

T. Most and C. Bucher, Energy-based simulation of concrete cracking using an improved mixed-mode cohesive crack model within a meshless discretization, International Journal for Numerical and Analytical Methods in Geomechanics, vol.66, issue.2, pp.285-305, 2006.
DOI : 10.1002/nag.536

G. D. Nguyen, A Thermodynamic Approach to Constitutive Modelling of Concrete using Damage Mechanics and Plasticity Theory, 2005.

C. E. Neuzil and J. V. Tracy, Flow through fractures, Water Resources Research, vol.15, issue.5, pp.191-199, 1981.
DOI : 10.1029/WR017i001p00191

S. L. Nichol, O. Hungr, and S. G. Evans, Large-scale brittle and ductile toppling of rock slopes, Canadian Geotechnical Journal, vol.39, issue.4, pp.773-788, 2002.
DOI : 10.1139/t02-027

J. Noorishad, M. Ayatollahi, and P. Witherspoon, A finite-element method for coupled stress and fluid flow analysis in fractured rock masses, International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, vol.19, issue.4, pp.185-193, 1982.
DOI : 10.1016/0148-9062(82)90888-9

D. V. Oliveira, Experimental and numerical analysis of blocky masonry structures under cyclic loading, 2003.

D. V. Oliveira and P. B. Lourenço, Implementation and validation of a constitutive model for the cyclic behaviour of interface elements, Computers & Structures, vol.82, issue.17-19, pp.1451-1461, 2004.
DOI : 10.1016/j.compstruc.2004.03.041

R. Olsson and N. Barton, An improved model for hydromechanical coupling during shearing of rock joints, International Journal of Rock Mechanics and Mining Sciences, vol.38, issue.3, pp.317-329, 2001.
DOI : 10.1016/S1365-1609(00)00079-4

F. D. Patton, Multiple modes of shear failure in rock, Proc. 1 st Cong. ISRM, Lisbon, pp.509-513, 1966.

P. E. Petersson, Crack growth and development of fracture zones in plain concrete and similar materials, 1981.

R. J. Pine and P. A. Cundall, Application of the flow-rock interaction program (FRIP) to the modeling of hot dry rock geothermal energy systems, Proc. Of Int. Symp. on Fundamentals of Rock Joints, pp.292-302, 1985.

M. E. Plesha, Constitutive models for rock discontinuities with dilatancy and surface degradation, International Journal for Numerical and Analytical methods in Geomechanics, vol.18, issue.4, pp.345-362, 1987.
DOI : 10.1002/nag.1610110404

A. Pouya and M. Ghoreychi, Determination of rock mass strength properties by homogenization, International Journal for Numerical and Analytical Methods in Geomechanics, vol.15, issue.13, pp.1285-1303, 2001.
DOI : 10.1002/nag.176

URL : https://hal.archives-ouvertes.fr/hal-00576675

A. Pouya, F. Elmi, E. Bourgeois, and P. B. Yazdi, Eléments joints dans le code CESAR-LCPC, Application aux milieux fracturés, fissurés et aux problèmes d'interface, 2009.

S. D. Priest, Discontinuity analysis for rock engineering, 1993.
DOI : 10.1007/978-94-011-1498-1

E. Puntel, G. Bolzon, and V. E. Saouma, Fracture Mechanics Based Model for Joints under Cyclic Loading, Journal of Engineering Mechanics, vol.132, issue.11, pp.1151-1159, 2006.
DOI : 10.1061/(ASCE)0733-9399(2006)132:11(1151)

X. Qiu, M. E. Plesha, X. Huang, and B. C. Haimson, An investigation of the mechanics of rock joints???Part II. Analytical investigation, International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, vol.30, issue.3, pp.271-287, 1993.
DOI : 10.1016/0148-9062(93)92730-E

Y. N. Rabotnov, Creep rupture, 12 th Int. Congress of Applied mechanics, 1968.

Y. N. Rabotnov, Creep Problems in Structural Members, Journal of Applied Mechanics, vol.37, issue.1, 1969.
DOI : 10.1115/1.3408479

Q. Rao, Pure shear fracture of brittle rock, 1999.

H. W. Reinhardt and H. A. Cornelissen, Post-peak cyclic behaviour of concrete in uniaxial tensile and alternating tensile and compressive loading, Cement and Concrete Research, vol.14, issue.2, pp.263-270, 1984.
DOI : 10.1016/0008-8846(84)90113-3

J. R. Rice, The mechanics of earthquake rupture Physics of the Earth's Interior, pp.555-649, 1980.

E. Romm, Flow characteristics of fractured rocks, 1966.

P. W. Rowe, L. Barden, and I. K. Lee, Energy components during the triaxial cell and direct shear tests, Géotechnique, pp.242-261, 1964.

J. Rutqvist, Coupled stress-flow properties of rock joints from hydraulic field testing, Royal Institute of Technology, 1995.

J. Rutqvist and O. Stephansson, The role of hydromechanical coupling in fractured rock engineering, Hydrogeology Journal, vol.80, issue.1, pp.7-40, 2003.
DOI : 10.1007/s10040-002-0241-5

Y. Sail, Modélisation numérique de la stabilité des massifs rocheux fracturés par le code aux Eléments Finis CESAR-LCPC, 2008.

M. R. Salari, S. Saeb, K. J. Willam, S. J. Patchet, and R. C. Carrasco, A coupled elastoplastic damage model for geomaterials, Computer Methods in Applied Mechanics and Engineering, vol.193, issue.27-29, pp.27-29, 2004.
DOI : 10.1016/j.cma.2003.11.013

C. Scavia, A method for the study of crack propagation in rock structures, G??otechnique, vol.45, issue.3, pp.447-463, 1995.
DOI : 10.1680/geot.1995.45.3.447

G. Senfaute, STABROCK, Impact des changements climatiques sur la stabilité des fronts rocheux : Observation, Expérimentation et Modélisation, Rapport Final de tranche d'étude No 1, Ministère de l'écologie, du développement et de l'aménagement durables, 2007.

J. F. Shao, . Duveau-;-n, . Hoteit-;-m, . Sibai-;-m, and . Bar, Time dependent continuous damage model for deformation and failure of brittle rock, International Journal of Rock Mechanics and Mining Sciences, vol.34, issue.3-4, pp.3-4, 1997.
DOI : 10.1016/S1365-1609(97)00101-9

J. F. Shao, H. Zhou, and K. T. Chau, Coupling between anisotropic damage and permeability variation in brittle rocks, International Journal for Numerical and Analytical Methods in Geomechanics, vol.66, issue.12, pp.1231-1247, 2005.
DOI : 10.1002/nag.457

URL : https://hal.archives-ouvertes.fr/hal-00021991

J. F. Shao, N. Ata, and O. Ozanam, Study of desaturation and resaturation in brittle rock with anisotropic damage, Engineering Geology, vol.81, issue.3, pp.341-352, 2005.
DOI : 10.1016/j.enggeo.2005.06.015

URL : https://hal.archives-ouvertes.fr/hal-00021978

J. F. Shao, Y. Jia, D. Kondo, and A. S. Chiarelli, A coupled elastoplastic damage model for semi-brittle materials and extension to unsaturated conditions, Mechanics of Materials, vol.38, issue.3, pp.218-232, 2006.
DOI : 10.1016/j.mechmat.2005.07.002

URL : https://hal.archives-ouvertes.fr/hal-00021987

J. F. Shao, K. T. Chau, and X. T. Feng, Modeling of anisotropic damage and creep deformation in brittle rocks, International Journal of Rock Mechanics and Mining Sciences, vol.43, issue.4, pp.582-592, 2006.
DOI : 10.1016/j.ijrmms.2005.10.004

URL : https://hal.archives-ouvertes.fr/hal-00021993

J. C. Sharp, Fluid flow through fissured media, 1970.

B. Shen, O. Stephansson, M. Rinne, H. S. Lee, L. Jing et al., A Fracture Propagation Code And Its Applications To Nuclear Waste Disposal, International Journal of Rock Mechanics and Mining Sciences, vol.41, pp.472-477, 2004.
DOI : 10.1016/j.ijrmms.2004.03.085

G. C. Shi, Handbook of Stress Intensity Factors, 1973.

J. C. Simo and J. W. Ju, Strain- and stress-based continuum damage models???I. Formulation, International Journal of Solids and Structures, vol.23, issue.7, pp.821-840, 1987.
DOI : 10.1016/0020-7683(87)90083-7

URL : http://doi.org/10.1016/0895-7177(89)90117-9

R. M. Spang, . Sonser, and . Th, Optimized rockfall protection by, Proc 8th Int Congress Rock Mechanics, pp.1233-1242, 1995.

T. D. Sullivan, Hydromechanical Coupling and Pit Slope Movements, Slope Stability, Australian Centre for Geomechanics, 2007.

R. N. Singh and G. X. Sun, Fracture mechanics applied to slope stability analysis, Int. Symp. on Surface Mining -Future Concepts, pp.93-97, 1989.

J. Sjoberg, Large Scale Slope Stability in open pit mining, technical report, Lulea University of Technology, Division of rock mechanics, 1996.

V. Slowik, V. E. Saouma, and A. Thompson, Large scale direct tension test of concrete, Cement and Concrete Research, vol.26, issue.6, pp.949-954, 1996.
DOI : 10.1016/0008-8846(96)00062-2

V. Slowik, G. Plizzari, and V. E. Saouma, Fracture of concrete under variable amplitude fatigue loading, ACI Materials Journal, vol.93, issue.3, pp.272-283, 1996.

D. Snow, Anisotropie Permeability of Fractured Media, Water Resources Research, vol.15, issue.1, pp.1273-1289, 1969.
DOI : 10.1029/WR005i006p01273

T. Stankowski, K. Runesson, and S. Sture, Fracture and Slip of Interfaces in Cementitious Composites. I: Characteristics, Journal of Engineering Mechanics, vol.119, issue.2, pp.292-314, 1993.
DOI : 10.1061/(ASCE)0733-9399(1993)119:2(292)

D. Stead, J. S. Coggan, and E. Eberhardt, Realistic simulation of rock slope failure mechanisms: the need to incorporate principles of fracture mechanics, International Journal of Rock Mechanics and Mining Sciences, vol.41, issue.3, p.466, 2004.
DOI : 10.1016/j.ijrmms.2003.12.138

O. Stephansson, B. Shen, M. Rinne, T. Backers, K. Koide et al., Geomechanical evaluation and analysis of research shafts and galleries in MIU Project, Proceeding of the 1 st Kyoto International Symposium on Underground Environmental, pp.17-18, 2003.

G. Swan, Determination of stiffness and other joint properties from roughness measurements, Rock Mechanics and Rock Engineering, vol.84, issue.7, pp.19-38, 1983.
DOI : 10.1007/BF01030216

G. X. Swoboda, &. L. Shen, and . Rosas, Damage model for jointed rock mass and its application to tunnelling, Computers and Geotechnics, vol.22, issue.3-4, pp.183-203, 1998.
DOI : 10.1016/S0266-352X(98)00009-3

K. Terzaghi, Die Berechnung der Durchlassigkeitziffer des Tones aus dem Verlauf der hydrodynamischen Spannungserscheinungen, Akad Wissensch Wien Sitzungsber Mathnaturwissensch Klasse IIa, vol.142, issue.3, pp.125-138, 1923.

T. M. Tharp and D. F. Coffin, Field application of fracture mechanics analysis to small rock slopes, Proc. 26th U.S. Symp. on Rock Mech, 1985.

A. Toumi and A. Bascoul, Mode I crack propagation in concrete under fatigue: microscopic observations and modelling, International Journal for Numerical and Analytical Methods in Geomechanics, vol.14, issue.13, pp.1299-1312, 2002.
DOI : 10.1002/nag.245

H. F. Wang, Theory of linear poroelasticity, 2000.

J. Watkins, Fracture toughness test for soll-cement samples in mode II, International Journal of Fracture, vol.23, issue.4, pp.135-138, 1983.
DOI : 10.1007/BF00020700

Z. Wei and J. Hudson, Permeability of jointed rock masses, pp.613-626, 1988.

T. R. West, The Effects of Positive Pore Pressure on Sliding and Toppling of Rock Blocks with Some Considerations of Intact Rock Effects, Environmental & Engineering Geoscience, vol.II, issue.3, pp.339-353, 1996.
DOI : 10.2113/gseegeosci.II.3.339

P. Witherspoon, J. Wang, K. Iwai, and J. Gale, Validity of Cubic Law for fluid flow in a deformable rock fracture, Water Resources Research, vol.15, issue.5, pp.1016-1024, 1980.
DOI : 10.1029/WR016i006p01016

W. Wittke, Methods to analyze the stability of rock slopes with and without additional loading, Rock mechanics and engineering geology, 1965.

J. Wollrath, Ein strömungs-und Transportmodell für klüftiges Gestein und Untersuchungen zu homogenen Ersatzsystemen, 1990.

H. Y. Yang and M. L. Wang, Constitutive Theory of Interface Behavior in Quasi???Brittle Materials, Journal of Engineering Mechanics, vol.120, issue.12, pp.2588-2603, 1994.
DOI : 10.1061/(ASCE)0733-9399(1994)120:12(2588)

S. Yazdani and H. L. Schreyer, Combined Plasticity and Damage Mechanics Model for Plain Concrete, Journal of Engineering Mechanics, vol.116, issue.7, pp.1435-1450, 1990.
DOI : 10.1061/(ASCE)0733-9399(1990)116:7(1435)

Z. X. Zhang, An empirical relation between mode I fracture toughness and the tensile strength of rock, International Journal of Rock Mechanics and Mining Sciences, vol.39, issue.3, pp.401-406, 2002.
DOI : 10.1016/S1365-1609(02)00032-1

J. Zhao and E. Brown, Hydro-thermo-mechanical properties of joints in the Carnmenellis granite, Quarterly Journal of Engineering Geology and Hydrogeology, vol.25, issue.4, pp.279-290, 1992.
DOI : 10.1144/GSL.QJEG.1992.025.04.03

Q. Zhu, D. Kondo, J. F. Shao, and V. Pensee, Micromechanical modelling of anisotropic damage in brittle rocks and application, International Journal of Rock Mechanics and Mining Sciences, vol.45, issue.4, pp.467-477, 2008.
DOI : 10.1016/j.ijrmms.2007.07.014

URL : https://hal.archives-ouvertes.fr/hal-00755160