D. Anderson, G. Wheeler, and D. Mcfadden, DIFFUSE-INTERFACE METHODS IN FLUID MECHANICS, Annual Review of Fluid Mechanics, vol.30, issue.1, pp.139-165, 1998.
DOI : 10.1146/annurev.fluid.30.1.139

O. Basset, Simulation numérique d'´ ecoulements multi fluides sur grille de calcul, Thèse de doctorat, 2006.

A. Bonito, M. Laso, and M. Picasso, Numerical simulation of 3D viscoelastic flows with free surfaces, Journal of Computational Physics, vol.215, issue.2, pp.691-716, 2006.
DOI : 10.1016/j.jcp.2005.11.013

T. Bonometti, Développement d'une méyhode de simulation d'´ ecoulementsàecoulementsà bulles etàetà gouttes, Thèse de doctorat

J. Breil, Modélisation du remplissage en propergol de moteuràmoteurà propulsion solide, Thèse de doctorat, Ecole doctorale des sciences physiques et de l'ingénieur, 2001.

F. Brezzi, On the existence, uniqueness and approximation of saddle-point problems arising from lagrangian multipliers, Revue fran??aise d'automatique, informatique, recherche op??rationnelle. Analyse num??rique, vol.8, issue.R2, pp.129-151, 1974.
DOI : 10.1051/m2an/197408R201291

J. Bruchon, Etude de la formation d'une structure de mousse par simulation directe de l'expansion de bulles dans une matrice liquide polymère, Thèse de doctorat en mécanique numérique, 2004.

A. Caboussat, J. Rappaz, and M. Picasso, Numerical simulation of free surface incompressible liquid flows surrounded by compressible gas, Journal of Computational Physics, vol.203, issue.2, pp.626-649, 2005.
DOI : 10.1016/j.jcp.2004.09.009

F. Couderc, Dévellopement d'un code de calcul pour la simulation d'´ ecoulements de fluides non miscibles ApplicationàApplicationà la désintégration assistée d'un jet liquide par un courant gazeux, Thèse de doctorat, Ecole Nationale

T. Coupez, Génération de maillage et adaptation de maillage par optimisation locale, Revue européene desélémentsdeséléments finis, pp.403-423, 2002.

T. Coupez, Réinitialisation convective et locale des fonctions level set pour le mouvement de surfaces et d'interfaces. Journées activités universitaires et mécanique, 2006.

T. Coupez, J. Bruchon, and S. Batkam, Space-time finite element method for 3d process modelling. 18th annual meeting of the polymer processing society, 2002.

T. Coupez, H. Digonnet, and R. Ducloux, Parallel meshing and remeshing, Applied Mathematical Modelling, vol.25, issue.2, pp.83-98, 2000.
DOI : 10.1016/S0307-904X(00)00045-7
URL : https://hal.archives-ouvertes.fr/hal-00536635

T. Coupez, L. Silva, H. Digonnet, P. Laure, and R. Valette, CalculsélémentsCalculséléments finis multidomaines : applications auxprobì emes multi-phasiques, Livre IFS-GDR, 2009.

T. Coupez, W. Zerguine, H. Digonnet, A. Rodriguez-villa, and L. Silva, Multifluid flows, interface capturing and application to the simulation of the water assisted injection molding process, 22th annual meeting of the polymer processing society, 2006.
URL : https://hal.archives-ouvertes.fr/hal-00851364

T. Coupez and S. Marie, From a direct solver to a parallel iterative solver in 3d forming simulation, International Journal of Supercomputer and Application, vol.11, pp.205-211, 1997.

J. O. Cruickshank, Low-Reynolds-number instabilities in stagnating jet flows, Journal of Fluid Mechanics, vol.16, issue.-1, pp.111-127, 1988.
DOI : 10.1017/S0022112062001421

J. O. Cruickshank and B. R. Munson, Viscous fluid buckling of plane and axisymmetric jets, Journal of Fluid Mechanics, vol.113, issue.-1, pp.221-239, 1981.
DOI : 10.1016/0300-9467(74)80021-3

H. Digonnet, T. Coupez, and L. Silva, Parallel computation for solving efficiently 3d visoelastic fluid flow problems. European congress on computational methods in applied sciences and engineering eccomas, 2004.

F. Brezzi, D. N. Arnold, and M. Fortin, A stable finite element for the stokes equations, Calcolo, vol.21, 1983.

]. E. Foudrinier, ´ Etude numérique et expérimentale du procédé d'extrusion de pâtes argileuses, Thèse de doctorat en mécanique numérique, 2007.

C. Gruau, Génération de métriques pour génération anisotrope de maillages, applicationsàapplicationsà la mise en forme des matériaux, Thèse de doctorat en mécanique numérique, 2004.

B. Hiroux, T. Coupez, R. Valette, and B. Vergnes, Mesh immersion technique for moving domain calculation. application to twin screw extrusion, 2005.

. Ishii, Thermo-fluid dynamic theory of two-phase flow, 1975.

R. Loge, L. Delannay, H. Digonnet, Y. Chastel, M. Bernacki et al., Linking plastic deformation to recrystallization in metals using digital microstructures, Philosophical Magazine, vol.14, issue.30-32, pp.303691-3712
DOI : 10.1016/j.actamat.2006.10.022
URL : https://hal.archives-ouvertes.fr/hal-00513982

D. Magnaudet, J. Fabre, and M. Rivero, Accelerated flows past a rigid sphere or a spherical bubble. Part 1. Steady straining flow, Journal of Fluid Mechanics, vol.16, issue.-1, pp.97-136, 1995.
DOI : 10.1016/0301-9322(79)90024-7

L. Mahadevan, Fluid ???rope trick??? investigated, Nature, vol.392, issue.6672, pp.140-143, 1998.
DOI : 10.1038/32321

A. Maronnier, M. Rappaz, and M. Picasso, Numerical Simulation of Free Surface Flows, Journal of Computational Physics, vol.155, issue.2, pp.439-455, 1999.
DOI : 10.1006/jcph.1999.6346

A. Maronnier, M. Rappaz, and M. Picasso, Numerical simulation of three-dimensional free surface flows, International Journal for Numerical Methods in Fluids, vol.244, issue.7, pp.697-716, 2003.
DOI : 10.1002/fld.532

M. R. Maxey and J. J. Riley, Equation of motion for a small rigid sphere in a non uniform flow, PHYS. FLUIDS, vol.26, pp.2883-2889, 1983.

Y. Mesri, L. Silva, W. Zerguine, H. Digonnet, and T. Coupez, Dynamic Parallel Adaption for Three Dimensional Unstructured Meshes: Application to Interface Tracking, 2008.
DOI : 10.1007/978-3-540-87921-3_12
URL : https://hal.archives-ouvertes.fr/hal-01466975

H. Miled, J. F. Agassant, L. Silva, and T. Coupez, Numerical Simulation of Fiber Orientation and Resulting Thermo-Elastic Behavior in Reinforced Thermo-Plastics, Mechanical Response of Composites, vol.10, pp.293-313, 2008.
DOI : 10.1007/978-1-4020-8584-0_15
URL : https://hal.archives-ouvertes.fr/hal-00846522

S. Osher and J. A. Sethian, Fronts propagating with curvature-dependent speed: Algorithms based on Hamilton-Jacobi formulations, Journal of Computational Physics, vol.79, issue.1, pp.12-49, 1988.
DOI : 10.1016/0021-9991(88)90002-2

E. Pichelin and T. Coupez, Finite element solution of the 3D mold filling problem for viscous incompressible fluid, Computer Methods in Applied Mechanics and Engineering, vol.163, issue.1-4, pp.359-371, 1998.
DOI : 10.1016/S0045-7825(98)00024-3
URL : https://hal.archives-ouvertes.fr/hal-00617037

E. Pichelin and T. Coupez, A Taylor discontinuous Galerkin method for the thermal solution in 3D mold filling, Computer Methods in Applied Mechanics and Engineering, vol.178, issue.1-2, pp.153-169, 1999.
DOI : 10.1016/S0045-7825(99)00011-0
URL : https://hal.archives-ouvertes.fr/hal-00542132

W. J. Rider and D. B. Kothe, Stretching and tearing interface tracking methods, 12th Computational Fluid Dynamics Conference, 1995.
DOI : 10.2514/6.1995-1717

L. Silva, Ecoulements viscoélastiques et compressibles avec applicationà applicationà la simulation 3D de l'injection de polymères, Thèse de doctorat en mécanique numérique, 2007.

G. I. Taylor, Instability of jets, threads, and sheets of viscous fluid, Proceedings -12th international congress of applied mechanics, 1968.
DOI : 10.1007/978-3-642-85640-2_30

R. Temam, Some developments on navier-stokes equations in the second half of the 20 t h century, Development of Mathematics, 1950.

M. F. Tomé, B. Duffy, and S. Mckee, A numerical technique for solving unsteady non-Newtonian free surface flows, Journal of Non-Newtonian Fluid Mechanics, vol.62, issue.1, pp.9-34, 1995.
DOI : 10.1016/0377-0257(95)01391-1

M. F. Tomé, J. A. Cuminato, N. Mangiavacchi, V. G. Ferreira, F. S. De-sousa et al., A numerical method for solving threedimensional generalized newtonian free surface flows, JOURNAL OF NON- NEWTONIAN FLUID MECHANICS, vol.123, pp.2-3, 2004.

M. F. Tome and S. Mckee, Numerical simulation of viscous flow: Buckling of planar jets, International Journal for Numerical Methods in Fluids, vol.2, issue.6, pp.705-718, 1999.
DOI : 10.1002/(SICI)1097-0363(19990330)29:6<705::AID-FLD809>3.0.CO;2-C

A. Toutant, Modélisation physique des intéractions entre interfaces et turbulence, Thèse de doctorat, 2006.

R. Valette, T. Coupez, and B. Vergnes, Mesh immersion technique for 3d moving domain calculation and applications to twin-screw extrusion and mixing. 22th annual meeting of the polymer processing society, 2006.
URL : https://hal.archives-ouvertes.fr/hal-00851365

L. Ville, T. Coupez, and L. Silva, Convected level set method for the numerical simulation of fluid buckling, International Journal for Numerical Methods in Fluids, vol.4, issue.3, pp.324-344, 2010.
DOI : 10.1002/fld.2259
URL : https://hal.archives-ouvertes.fr/hal-00595325

]. S. Vincent, Modélisation d'´ ecoulements incompressibles de fluides nonmiscibles, Thèse de doctorat, Ecole doctorale des sciences physiques et de l'ingénieur, 1999.

S. Vincent and J. P. Caltagirone, Efficient solving method for unsteady incompressible interfacial flow problems, International Journal for Numerical Methods in Fluids, vol.28, issue.6, pp.795-811, 1999.
DOI : 10.1002/(SICI)1097-0363(19990730)30:6<795::AID-FLD872>3.0.CO;2-2

S. Vincent and J. P. Caltagirone, One cell local multigrid method for solving unsteady incompressible multi-phase flows, SoumisàSoumisà J. COMPUT. PHYS, 1999.

S. Vincent, J. P. Caltagirone, and O. Lebaigue, TEST-CASE NO 14: POISEUILLE TWO-PHASE FLOW (PA), Multiphase Science and Technology, vol.16, issue.1-3, pp.97-100, 2004.
DOI : 10.1615/MultScienTechn.v16.i1-3.150

W. Zerguine, T. Coupez, L. Silva, and H. Digonnet, Interface capturing and application to the simulation of the water assisted injection molding process, 8th. world congress on computational mechanics (wccm8), Centre d'Etude et de Mise En Forme des Matériaux de l'´ ecole des Mines de, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00851364