évolution de la distribution de longueur des fibres, on prend aussi en compte les caractéristiques des fibres, c'est-à-dire leur module d'Young (E = 72 ,
Mécanismes élémentaires de dispersion de charges de silice dans une matrice élastomère, Thèse de doctorat, École nationale supérieure des mines de Paris, 2011. ,
Mixing and Compounding of Polymers : Theory and Practice, 2009. ,
DOI : 10.3139/9783446433717
THE DEFINITION AND MEASUREMENT OF SOME CHARACTERISTICS OF MIXTURES, Applied Scientific Research, vol.3, issue.4, pp.279-296, 1952. ,
DOI : 10.1016/B978-0-08-026250-5.50050-2
Analyzing mixing in periodic flows by distribution matrices: Mapping method, AIChE Journal, vol.36, issue.5, pp.47-1005, 2001. ,
DOI : 10.1002/aic.690470507
Global measures of distributive mixing and their behavior in chaotic flows, Korea-Australia Rheology Journal, vol.15, issue.4, pp.197-208, 2003. ,
Characterization of Distributive Mixing in Polymer Processing Equipment using Renyi Entropies, International Polymer Processing, vol.16, issue.4, pp.315-322, 2001. ,
DOI : 10.3139/217.1653
Numerical simulation of distributive mixing in 3-D flows, Macromolecular Symposia, vol.9, issue.1, pp.91-98, 1996. ,
DOI : 10.1002/masy.19961120114
The quantitative description of fluid mixing using Lagrangian- and concentration-based numerical approaches, Chemical Engineering Science, vol.54, issue.2, pp.159-170, 1999. ,
DOI : 10.1016/S0009-2509(98)00169-9
3-D numerical analysis on the mixing performance for assemblies with filled zone of right-handed and left-handed double-flighted screws and kneading blocks in twin-screw extruders, Polymer Engineering & Science, vol.5, issue.4, pp.707-723, 2002. ,
DOI : 10.1002/pen.10983
A mathematical theory of communication. The Bell System Technical Journal, pp.379-423, 1948. ,
On measures of entropy and information, Proceedings of the Fourth Berkeley Symposium Mathematicics, Statistics and Probability, p.574, 1960. ,
Dynamics of Filler Size and Spatial Distribution in a Plasticating Single Screw Extruder ??? Modeling and Experimental Observations, International Polymer Processing, vol.25, issue.3, pp.188-198, 2010. ,
DOI : 10.3139/217.2319
Stirring by chaotic advection, Journal of Fluid Mechanics, vol.357, issue.-1, pp.1-21, 1984. ,
DOI : 10.1063/1.525415
The Kinematics of Mixing : Stretching, Chaos, and Transport, 1989. ,
Approche Mécanique du Mélange par Extrusion, Thèse de doctorat, 1988. ,
3-D non-isothermal flow field analysis and mixing performance evaluation of kneading blocks in a co-rotating twin srew extruder, Polymer Engineering & Science, vol.27, issue.5, pp.840-849, 2001. ,
DOI : 10.1002/pen.10781
Flow patterns and mixing mechanisms in the screw mixing element of a co-rotating twin-screw extruder, Polymer Engineering & Science, vol.27, issue.5, pp.925-939, 2002. ,
DOI : 10.1002/pen.11002
Distributive mixing in conveying elements of a ZSK-53 co-rotating twin screw extruder, Polymer Engineering & Science, vol.49, issue.6, pp.926-935, 1998. ,
DOI : 10.1002/pen.10260
Numerical study of twin-screw extruders by three-dimensional flow analysis?development of analysis technique and evaluation of mixing performance for full flight screws, Polymer Engineering & Science, vol.5, issue.16, pp.36-2142, 1996. ,
DOI : 10.1002/pen.10611
Mixing mechanism of three-tip kneading block in twin screw extruders, Polymer Engineering & Science, vol.5, issue.1, pp.168-178, 2000. ,
DOI : 10.1002/pen.11150
Parametric Study of the Mixing Efficiency in a Kneading Block Section of a Twin-screw Extruder, International Polymer Processing, vol.19, issue.3, pp.207-217, 2004. ,
DOI : 10.3139/217.1836
Study of particle trajectories, residence times and flow behavior in kneading discs of intermeshing co-rotating twin-screw extruders, Polymer Engineering and Science, vol.58, issue.4, pp.779-793, 2004. ,
DOI : 10.1002/pen.20070
Mean residence time analysis for twin screw extruders, Polymer Engineering & Science, vol.44, issue.1, pp.227-237, 2000. ,
DOI : 10.1002/pen.11155
Contribution à la modélisation de l'extrusion réactive en machine bi-vis ,
A new approach to analyzing residence time and mixing in a co-rotating twin screw extruder, Polymer Engineering & Science, vol.26, issue.2, pp.286-298, 1999. ,
DOI : 10.1002/pen.11415
Mapping approach for 3D laminar mixing simulations: application to industrial flows, International Journal for Numerical Methods in Fluids, vol.112, issue.3-4, pp.3-4, 2002. ,
DOI : 10.1002/fld.290
Flow field analysis of a cavity transfer mixer, Polymer Engineering and Science, vol.IV, issue.15, pp.1224-1230, 1994. ,
DOI : 10.1002/pen.760341509
Flow field analysis of the kneading disc region in a co-rotating twin screw extruder, Polymer Engineering and Science, vol.IV, issue.19, pp.1411-1417, 1992. ,
DOI : 10.1002/pen.760321903
Influence of design on dispersive mixing performance in an axial discharge continuous mixer?LCMAX 40, Polymer Engineering & Science, vol.24, issue.6, pp.936-946, 1998. ,
DOI : 10.1002/pen.10261
Study of mixing efficiency in kneading discs of co-rotating twin-screw extruders, Polymer Engineering & Science, vol.24, issue.6, pp.1082-1090, 1997. ,
DOI : 10.1002/pen.11753
Influence of design on mixing efficiency in the kneading disc region of co-rotating twin screw extruders, Journal of Reinforced Plastics and Composites, vol.17, issue.12, pp.1076-1086, 1998. ,
Objective and generally applicable criteria for flow classification, Journal of Non-Newtonian Fluid Mechanics, vol.6, issue.1, pp.69-76, 1979. ,
DOI : 10.1016/0377-0257(79)87004-4
Flows of constant stretch history for polymeric materials with power-law distributions of relaxation times, Rheologica Acta, vol.14, issue.5, pp.443-449, 1985. ,
DOI : 10.1007/BF01462490
Study of mixing efficiency in roll-mills, Polymer Engineering & Science, vol.24, issue.3, pp.305-310, 1996. ,
DOI : 10.1002/pen.10417
A study of fiber breakage during compounding of glass fiber reinforced composites, dans Polymer Processing Society 26th Annual Meeting, 2010. ,
3-D numerical simulations of nonisothermal flow in co-rotating twin screw extruders, Polymer Engineering & Science, vol.42, issue.2, pp.357-364, 2000. ,
DOI : 10.1002/pen.11169
Numerical simulation and experimental verification of nonisothermal flow in counter-rotating nonintermeshing continuous mixers, Polymer Engineering & Science, vol.26, issue.2, pp.365-375, 2000. ,
DOI : 10.1002/pen.11170
Numerical simulation of pressure and velocity profiles in kneading elements of a co-rotating twin screw extruder, Polymer Engineering & Science, vol.19, issue.2, pp.525-541, 2000. ,
DOI : 10.1002/pen.11184
A three???dimensional fictitious domain method for incompressible fluid flow problems, International Journal for Numerical Methods in Fluids, vol.25, issue.6, pp.719-736, 1997. ,
DOI : 10.1002/(SICI)1097-0363(19970930)25:6<719::AID-FLD585>3.3.CO;2-B
Fluid-structure interaction methods for multiscale simulation of mixing processes ,
URL : https://hal.archives-ouvertes.fr/hal-00509546
Multiscale simulation of mixing processes using 3D-parallel, fluid-structure interaction techniques, International Journal of Material Forming, vol.1, issue.S1, pp.1131-1134, 2008. ,
DOI : 10.1007/s12289-008-0179-9
URL : https://hal.archives-ouvertes.fr/hal-00510363
A Direct 3D Numerical Simulation Code for Extrusion and Mixing Processes, International Polymer Processing, vol.24, issue.2, pp.141-147, 2009. ,
DOI : 10.3139/217.2207
URL : https://hal.archives-ouvertes.fr/hal-00509483
A Level Set Approach for Computing Solutions to Incompressible Two-Phase Flow, Journal of Computational Physics, vol.114, issue.1, pp.146-159, 1994. ,
DOI : 10.1006/jcph.1994.1155
Geometric Tools for Computer Graphics, 2002. ,
A new formulation of the distributed Lagrange multiplier/fictitious domain method for particulate flows, International Journal of Multiphase Flow, vol.26, issue.9, pp.1509-1524, 2000. ,
DOI : 10.1016/S0301-9322(99)00100-7
Les méthodes numériques pour les écoulements de fluides chargés. dans 1er colloque du GDR interactions fluide-structure, 2005. ,
From a Direct Solver To a Parallel Iterative Solver in 3-d fOrming Simulation, Computational Fluid And Solid Mechanics 2003, Vols 1 And 2, Proceedings, pp.277-285, 1997. ,
DOI : 10.1177/109434209701100402
Metric construction by length distribution tensor and edge based error for anisotropic adaptive meshing, Journal of Computational Physics, vol.230, issue.7, pp.2391-2405, 2011. ,
DOI : 10.1016/j.jcp.2010.11.041
URL : https://hal.archives-ouvertes.fr/hal-00579536
Optimisation de la parallélisation de remaillage par permutation, extraction et recollement de sous maillages. dans 19ème Congrès français de mécanique, 2009. ,
Repartitionnement dynamique, mailleur parallèle et leurs applications à la simulation numérique en mise en forme des matériaux, Thèse de doctorat, 2001. ,
A posteriori error estimation and anisotropic mesh adaptation, 2010. ,
A global computer software for polymer flows in corotating twin screw extruders, Polymer Engineering & Science, vol.11, issue.11, pp.1548-2634, 1998. ,
DOI : 10.1002/pen.10348
URL : https://hal.archives-ouvertes.fr/hal-00573794
Étude d'un indicateur de mélange basé sur la déformation. Stage de fin d'étude, 2011. ,
Effect of compounding on the properties of short fiber reinforced injection moldable thermoplastic composites, Polymer Composites, vol.2, issue.1, pp.20-28, 1985. ,
DOI : 10.1002/pc.750060105
The processing of fiber reinforced thermoplastics using co-rotating twin screw extruders, Polymer Composites, vol.22, issue.2, pp.98-102, 1989. ,
DOI : 10.1002/pc.750100206
Experimental Studies for Optimizing Screw and Die Design When Compounding Fiberglass Strand on the Co-Rotating Twin Screw Extruder, Journal of Reinforced Plastics and Composites, vol.12, issue.3, pp.311-326, 1993. ,
DOI : 10.1177/073168449301200305
Experimental analysis of the kneading disk region in a co-rotating twin screw extruder : Part 2. Glass-fiber degradation during compounding Advances in Polymer Technology, pp.25-32, 1997. ,
A comparative study of fiber breakage in compounding glass fiber-reinforced thermoplastics in a buss kneader, modular Co-rotating and counter-rotating twin screw extruders, Polymer Engineering & Science, vol.14, issue.9, pp.1757-1768, 1999. ,
DOI : 10.1002/pen.11570
Experimental Studies and Modeling of Development of Dispersion and Fiber Damage in Continuous Compounding, International Polymer Processing, vol.20, issue.3, pp.322-331, 2005. ,
DOI : 10.3139/217.1894
Techniques for compounding glass fiber-reinforced thermoplastics, Polymer Engineering and Science, vol.60, issue.1, pp.50-57, 1977. ,
DOI : 10.1002/pen.760170110
Glass fiber length degradation in thermoplastics processing, Polymer- Plastics Technology and Engineering, vol.18, issue.1, 1982. ,
Some studies on glass fiber-reinforced polypropylene. Part II: Mechanical properties and their dependence on fiber length, interfacial adhesion, and fiber dispersion, Polymer Composites, vol.282, issue.1, pp.16-27, 1989. ,
DOI : 10.1002/pc.750100104
A numerical simulation of short fiber orientation in compression molding, Polymer Composites, vol.9, issue.3, pp.164-173, 1990. ,
DOI : 10.1002/pc.750110305
Fiber orientation in simple injection moldings. Part I: Theory and numerical methods, Polymer Composites, vol.33, issue.4, pp.317-331, 1992. ,
DOI : 10.1002/pc.750130409
Fiber orientation and mechanical properties of short-fiber-reinforced injection-molded composites: Simulated and experimental results, Polymer Composites, vol.22, issue.5, pp.367-382, 1993. ,
DOI : 10.1002/pc.750140503
Applications of a fiber orientation prediction algorithm for compression molded parts with multiple charges, Polymer Composites, vol.36, issue.4, pp.261-269, 1994. ,
DOI : 10.1002/pc.750150404
Coupled analysis of injection molding filling and fiber orientation, including in-plane velocity gradient effect, Polymer Composites, vol.29, issue.6, pp.859-872, 1996. ,
DOI : 10.1002/pc.10679
The distribution of fibre lengths in injection moulded polyamide composite components, Journal of Materials Processing Technology, vol.56, issue.1-4, pp.282-291, 1996. ,
DOI : 10.1016/0924-0136(95)01842-5
Fibre orientation calculation in injection moulding of reinforced thermoplastics, Journal of Non-Newtonian Fluid Mechanics, vol.73, issue.3, pp.317-326, 1997. ,
DOI : 10.1016/S0377-0257(97)00048-7
Injection molding of glass fiber reinforced phenolic composites. 2: Study of the injection molding process, Polymer Composites, vol.VI, issue.1, pp.37-47, 1998. ,
DOI : 10.1002/pc.10073
Prediction of thermo-mechanical properties for compression moulded composites, Composites Part A: Applied Science and Manufacturing, vol.29, issue.1-2, pp.63-70, 1998. ,
DOI : 10.1016/S1359-835X(97)00039-0
Thermoviscoelastic simulation of thermally and pressure-induced stresses in injection moulding for the prediction of shrinkage and warpage for fibre-reinforced thermoplastics, Journal of Non-Newtonian Fluid Mechanics, vol.84, issue.2-3, pp.159-190, 1999. ,
DOI : 10.1016/S0377-0257(98)00148-7
Description and modeling of fiber orientation in injection molding of fiber reinforced thermoplastics, Polymer, vol.46, issue.17, pp.46-6719, 2005. ,
DOI : 10.1016/j.polymer.2005.05.026
URL : https://hal.archives-ouvertes.fr/hal-00530704
Eine neue Bestimmung der Molek??ldimensionen, Annalen der Physik, vol.17, issue.2, pp.289-306, 1906. ,
DOI : 10.1002/andp.19063240204
The effect of Brownian motion on the bulk stress in a suspension of spherical particles, Journal of Fluid Mechanics, vol.17, issue.01, pp.97-117, 1977. ,
DOI : 10.1016/0001-8686(72)80001-0
A Mechanism for Non???Newtonian Flow in Suspensions of Rigid Spheres, Transactions of the Society of Rheology, vol.3, issue.1, pp.111-136, 1959. ,
DOI : 10.1122/1.548848
The rheology of suspensions of solid particles, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.340, issue.2, pp.1201-1228, 2010. ,
DOI : 10.1021/j150458a001
On the viscosity of a concentrated suspension of solid spheres, Chemical Engineering Science, vol.22, issue.6, pp.847-853, 1967. ,
DOI : 10.1016/0009-2509(67)80149-0
Discontinuous and dilatant viscosity behavior in concentrated suspensions. II. Theory and experimental tests, Journal of Colloid and Interface Science, vol.46, issue.3, pp.491-506, 1974. ,
DOI : 10.1016/0021-9797(74)90059-9
Rheophysical classification of concentrated suspensions and granular pastes, Physical Review E, vol.59, issue.4, pp.4445-4457, 1999. ,
DOI : 10.1103/PhysRevE.59.4445
Rheology of a dilute suspension of axisymmetric Brownian particles, International Journal of Multiphase Flow, vol.1, issue.2, pp.195-341, 1974. ,
DOI : 10.1016/0301-9322(74)90018-4
The Motion of Ellipsoidal Particles Immersed in a Viscous Fluid, Series A : Containing Papers of a Mathematical and Physical Character, pp.161-179, 1922. ,
DOI : 10.1098/rspa.1922.0078
The kinetics of flowing dispersions, Journal of Colloid and Interface Science, vol.23, issue.4, pp.533-546, 1967. ,
DOI : 10.1016/0021-9797(67)90200-7
Observations of fibre orientation in simple shear flow of semi-dilute suspensions, Journal of Fluid Mechanics, vol.2, issue.-1, pp.277-296, 1992. ,
DOI : 10.1063/1.866809
The effect of hydrodynamic interactions on the orientation distribution in a fiber suspension subject to simple shear flow, Physics of Fluids, vol.7, issue.3, pp.487-506, 1995. ,
DOI : 10.1063/1.868647
Modeling fiber interactions in semiconcentrated fiber suspensions, Journal of Rheology, vol.53, issue.1, pp.49-72, 2009. ,
DOI : 10.1122/1.3000732
Forces on the surface of small ellipsoidal particles immersed in a linear flow field, Chemical Engineering Science, vol.57, issue.3, pp.515-526, 2002. ,
DOI : 10.1016/S0009-2509(01)00389-X
On the motion of small particles of elongated form, suspended in a viscous liquid. Second report on viscosity and plasticity, 1938. ,
Particle motions in sheared suspensions. I. Rotations, Journal of Colloid Science, vol.6, issue.4, pp.354-367, 1951. ,
DOI : 10.1016/0095-8522(51)90005-0
Orientation Behavior of Fibers in Concentrated Suspensions, Journal of Reinforced Plastics and Composites, vol.3, issue.2, pp.98-119, 1984. ,
DOI : 10.1177/073168448400300201
The Use of Tensors to Describe and Predict Fiber Orientation in Short Fiber Composites, Journal of Rheology, vol.31, issue.8, pp.31-751, 1987. ,
DOI : 10.1122/1.549945
An objective model for slow orientation kinetics in concentrated fiber suspensions: Theory and rheological evidence, Journal of Rheology, vol.52, issue.5, pp.1179-1202, 2008. ,
DOI : 10.1122/1.2946437
An anisotropic rotary diffusion model for fiber orientation in short- and long-fiber thermoplastics, Journal of Non-Newtonian Fluid Mechanics, vol.156, issue.3, pp.165-176, 2009. ,
DOI : 10.1016/j.jnnfm.2008.08.002
A Rheological Equation of State for Semiconcentrated Fiber Suspensions, Journal of Rheology, vol.28, issue.3, pp.207-227, 1984. ,
DOI : 10.1122/1.549748
Particle motions in sheared suspensions, Journal of Colloid Science, vol.14, issue.5, pp.457-472, 1959. ,
DOI : 10.1016/0095-8522(59)90012-1
Shear flow rheological properties, fiber damage, and mastication characteristics of aramid-, glass-, and cellulose-fiber-reinforced polystyrene melts, Journal of Applied Polymer Science, vol.25, issue.6, pp.1217-1244, 1980. ,
DOI : 10.1002/app.1980.070250623
Bending and breaking fibers in sheared suspensions, Polymer Engineering and Science, vol.44, issue.1, pp.23-31, 1981. ,
DOI : 10.1002/pen.760210105
Fiber fracture in reinforced thermoplastic processing, Polymer Engineering and Science, vol.27, issue.13, pp.743-749, 1983. ,
DOI : 10.1002/pen.760231309
On the Elastic Buckling of Rod-Shaped Particles in Sheared Suspensions, Journal of Colloid and Interface Science, vol.159, issue.2, pp.400-404, 1993. ,
DOI : 10.1006/jcis.1993.1339
Analysis of fiber damage mechanisms during processing of reinforced polymer melts, Engineering Analysis with Boundary Elements, vol.26, issue.7, pp.621-628, 2002. ,
DOI : 10.1016/S0955-7997(02)00018-8
Mécanique des matériaux, 1992. ,
Theory of elastic stability, 1961. ,
Correlation between processing conditions and fiber breakage during compounding of glass fiber-reinforced polyamide, Polymer Composites, vol.38, issue.11, pp.1842-1850, 2011. ,
DOI : 10.1002/pc.21217
URL : https://hal.archives-ouvertes.fr/hal-00636530
Cimlib : A fully parallel application for numerical simulations based on components assembly. dans NUMIFORM '07 : Materials Processing and Design : Modeling, Simulation and Applications, Pts I and II, AIP Conference Proceedings, pp.269-274, 2007. ,
Mini-éléments et factorisations incomplètes pour la parallélisation d'un solveur de stokes 2 D : application au forgeage, Thèse de doctorat, 2000. ,
Theoretical analysis of fiber motion and loads during flow, Polymer Composites, vol.3, issue.1, pp.1-11, 2004. ,
DOI : 10.1002/pc.20000
A Basic Model for a Twin-Screw Extruder, Journal of Food Science, vol.4, issue.1, pp.1047-1056, 1989. ,
DOI : 10.1111/j.1365-2621.1989.tb07941.x
Isothermal flow of viscous liquids in corotating twin screw devices, Polymer Engineering and Science, vol.88, issue.18, pp.1220-1228, 1980. ,
DOI : 10.1002/pen.760201808
Étude des écoulements de polymères dans une extrudeuse bivis corotative, Thèse de doctorat, École nationale supérieure des mines de Paris, 1992. ,
Geometry of fully wiped twin-screw equipment, Polymer Engineering and Science, vol.88, issue.12, pp.973-984, 1978. ,
DOI : 10.1002/pen.760181212
Computer simulation of starchy products' transformation by twin-screw extrusion, Journal of Food Engineering, vol.19, issue.1, pp.1-31, 1993. ,
Modelling of flow fields in distributive mixing elements, SPE ANTEC Tech. Papers, vol.1, issue.12, pp.1310-1316, 1992. ,
Das Betriebsverhalten der Zweiwelligen Knetscheiben Schneckenpresse von Type ZSK bei der Verarbeitung von Hochviskosen Flüssigkeiten, Thèse de doctorat, 1976. ,
DOI : 10.1002/cite.330490427
Évolutions morphologiques d'un mélange de polymères incompatibles dans une extrudeuse bivis corotative, Thèse de doctorat, 1995. ,
Solids Conveying and Melting in a Starve Fed Self-wiping Co-rotating Twin Screw Extruder, International Polymer Processing, vol.10, issue.2, pp.105-110, 1995. ,
DOI : 10.3139/217.950105
Design of Tightly Intermeshing Co-Rotating Twin Screw Extruders, International Polymer Processing, vol.9, issue.1, pp.11-25, 1994. ,
DOI : 10.3139/217.940011
An Analytical Model of the Conveying Behaviour of Closely Intermeshing Co-rotating Twin Screw Extruders, International Polymer Processing, vol.11, issue.2, pp.121-128, 1996. ,
DOI : 10.3139/217.960121
Heat Transfer in Single and Twin Screw Extruders, International Polymer Processing, vol.8, issue.4, pp.294-307, 1993. ,
DOI : 10.3139/217.930294
Fragmentation : Généralités. Théorie. Techniques de l'ingénieur, p.3, 2006. ,
A family of embedded Runge-Kutta formulae, Journal of Computational and Applied Mathematics, vol.6, issue.1, pp.19-26, 1980. ,
DOI : 10.1016/0771-050X(80)90013-3
Empirical Processes with Applications to Statistics, Classics in Applied Mathematics. Society for Industrial and Applied Mathematics, 2009. ,
DOI : 10.1137/1.9780898719017