A. A. Abdelrahman, G. Tadros, and S. H. Rizkalla, Test Model for the First Canadian Smart Highway Bridge, ACI Structural Journal, vol.92, issue.4, pp.451-458, 1995.

A. A. Abdelrahman and S. H. Rizkalla, Serviceability of Concrete Beams Prestressed by Carbon Fiber Reinforced Plastic Bars, ACI Structural Journal, vol.94, issue.4, pp.447-457, 1997.

A. A. Abdelrahman and S. H. Rizkalla, Deflection Control of Concrete Beams Pretensioned by CFRP Reinforcements, Journal of Composites for Construction, vol.3, issue.2, pp.55-62, 1999.
DOI : 10.1061/(ASCE)1090-0268(1999)3:2(55)

Z. Achillides, K. Pilakoutas, and P. Waldron, Bond behaviour of FRP bars to concrete " . Non-metallic (FRP) reinforcement for concrete structures proceedings of the third international symposium, pp.341-348, 1997.

Z. Achillides and K. Pilakoutas, Bond Behavior of Fiber Reinforced Polymer Bars under Direct Pullout Conditions, Journal of Composites for Construction, vol.8, issue.2, pp.173-181, 2004.
DOI : 10.1061/(ASCE)1090-0268(2004)8:2(173)

P. Acker and M. Behloul, Ductal Technology: a Large Spectrum of Properties, a Wide Range of Applications, Proceedings of the International Symposium on Ultra High Performance Concrete, pp.11-23, 2004.

R. Adimi and B. Benmokrane, Fatigue Behaviour of GFRP bars Embedded in Concrete, Proceedings of Annual Conference of the Canadian Society of Civil Engineering, pp.121-130, 1997.

B. D. Agarwal and L. J. Broutman, Analysis and Performance of Fibre Composites, 1990.

F. Al-mahmoud, A. Castel, R. François, and C. Tourneur, Effect of surface pre-conditioning on bond of carbon fibre reinforced polymer rods to concrete, Cement and Concrete Composites, vol.29, issue.9, pp.677-689, 2007.
DOI : 10.1016/j.cemconcomp.2007.04.010

A. Al-mayah, K. Soudki, and P. , Development and Assessment of a New CFRP Rod???Anchor System for Prestressed Concrete, Applied Composite Materials, vol.100, issue.5, pp.321-334, 2006.
DOI : 10.1007/s10443-006-9019-6

A. Al-mayah, K. Soudki, and A. Plumtree, Experimental and Analytical Investigation of a Stainless Steel Anchorage for CFRP Prestressing Tendons, PCI Journal, vol.46, issue.2, pp.88-100, 2001.
DOI : 10.15554/pcij.03012001.88.100

A. Al-mayah, A. Khaled, A. Soudki, and . Plumtree, Novel Anchor System for CFRP Rod:Finite-Element and Mathematical Models, Journal Of Composites For Construction, pp.469-476, 2007.

K. Alwis and C. J. Burgoyne, Time-Temperature Superposition to Determine the Stress-Rupture of Aramid Fibres, Applied Composite Materials, vol.9, issue.2, pp.249-264, 2006.
DOI : 10.1007/s10443-006-9017-8

M. Al-zahrani and . Muhammad, Bond Behavior of Fiber Reinforced Plastic (FRP) Reinforcements With Concrete, 1995.

M. Al-zahrani, S. Al-dulaijan, N. A. Bakis, C. Boothby, and T. , Evaluation of bond using FRP rods with axisymmetric deformations, Construction and Building Materials, vol.13, issue.6, pp.299-309, 1999.
DOI : 10.1016/S0950-0618(99)00038-0

M. M. Al-zahrani, A. Nanni, S. U. Al-dulaijan, B. , and C. E. , Bond of FRP to concrete in reinforcement rods with axisymmetric deformations. Advanced composite materials in bridges and structures. Canadian Society for Civil Engineers, pp.853-861, 1996.

N. Ando, H. Matsukawa, A. Hattori, and A. Mashima, Experimental Studies on the Long-term Tensile properties of FRP Tendons, Proceedings of the Third International Symposium on Non-Metallic (FRP) Reinforcement for Concrete Structures (FRPRCS-3), pp.203-210, 1997.

A. Nanni, C. E. Bakis, E. F. O-'neilt, and T. Dixon, Short-term sustained loading of FRP tendonanchor systems, Construction and Building Materials, vol.10, issue.4, pp.255-266, 1996.
DOI : 10.1016/0950-0618(95)00097-6

M. Arockiasamy, M. Zhuang, and K. Sandepudi, Durabilty Studies on Prestressed Concrete Beams with CFRP Tendons, Non-Metallic (FRP) Reinforcement for Concrete Structures, Proceedings of the Second International RILEM Symposium (FRPRCS-2), pp.456-462, 1995.

K. Audenaert, L. Taerwe, and D. Gazouli, Stress-Rupture of FRP: State of the Art, Proceedings of the Fifth Fibre-Reinforced Polymers for Reinforced Concrete Structures (FRPRCS-5), pp.517-526, 2001.

C. Bakis, V. S. Uppuluri, and N. A. , Analysis of bonding mechanisms of smooth and lugged FRP rods embedded in concrete, Composites Science and Technology, vol.58, issue.8, pp.1307-1319, 1998.
DOI : 10.1016/S0266-3538(98)00016-5

G. Balázs, Transfert Length of prestressing strand as a function of draw-in and intial prestress, PCI Journal, pp.86-93, 1993.

G. L. Balázs and A. Borosnyoi, Cracking in CFRP Prestressed Members, Proceedings of the 5th International Conference on FRP Reinforcement for Concrete Structures, pp.609-618, 2001.

G. L. Balázs and A. Borosnyoi, Long-term Behaviour of FRP, Proceedings of the International Workshop Composites in Construction: A Reality, pp.84-91, 2001.

L. C. Bank and T. R. Gentry, Accelerated Test Methods to Determine the Long-Term Behaviour of FRP Composite Structures: Environmental Effects, Journal of Reinforced Plastic and Composites, vol.14, pp.558-587, 1995.

E. J. Barbero, Introduction to Composite Materials Design, 1999.

M. Behloul, Analyse et modélisation du comportement d'un matériaùa matrice cimentaire fibréà ultra hautes performances, E.N.S. Cachan, doctoral thesis, vol.182, 1996.

M. Behloul and K. C. Lee, Ductal® Seonyu footbridge, Structural concrete, Journal of the fib, vol.4, issue.4, pp.195-201, 2003.

B. Benmokrane, Discussion: Grouted anchorages for aramid fibre reinforced plastic prestressing tendons, Canadian Journal of Civil Engineering, vol.21, issue.4, pp.713-715, 1994.
DOI : 10.1139/l94-074

B. Benmokrane, H. Xu, and I. Nishizaki, Aramid and carbon fibre-reinforced plastic prestressed ground anchors and their field applications, Canadian Journal of Civil Engineering, vol.24, issue.6, pp.968-985, 1997.
DOI : 10.1139/cjce-24-6-968

B. Benmokrane, B. Zhang, and A. Chennouf, Tensile properties and pullout behaviour of AFRP and CFRP rods for grouted anchor applications, Construction and Building Materials, vol.14, issue.3, pp.157-170, 2000.
DOI : 10.1016/S0950-0618(00)00017-9

B. Benmokrane and E. F. El-salakawy, Construction, Design, and Monitoring of a Bridge Deck Reinforced with FRP Bars: Wotton Bridge, Proceedings, 1st International Workshop on Structural Health Monitoring of Innovative Civil Engineering Structures, pp.175-184, 1920.

B. Benmokrane and B. Zhang, Design and evaluation of a new bond-type anchorage system for fiber reinforced polymer tendons " Can, J. Civ. Eng, vol.31, pp.14-26, 2004.

B. Benmokrane, P. Wang, T. R. Gentry, S. Faza, E. Cosenza et al., Test Methods to Determine Properties of FRP Rods for Concrete Structures Composites in Construction: A Reality, Proceedings of the International Workshop, pp.75-83, 2001.

B. Benmokrane, B. A. Tighiouart, and O. Chaallal, Bond strength and load distribution of composite GFRP reinforcing bars in concrete, ACI Material Journal, vol.93, issue.3, pp.246-253, 1996.

B. Benmokrane, B. Zhang, K. Laoubi, B. Tighiouart, and I. Lord, Mechanical and bond properties of new generation of carbon fibre reinforced polymer reinforcing bars for concrete structures, Canadian Journal of Civil Engineering, vol.29, issue.2, pp.338-343, 2002.
DOI : 10.1139/l02-013

K. Benzarti, L. Cangemi, and F. Maso, Transverse properties of unidirectional glass/epoxy composites: influence of fibre surface treatments, Composites Part A: Applied Science and Manufacturing, vol.32, issue.2, pp.32-197, 2001.
DOI : 10.1016/S1359-835X(00)00136-6

K. Benzarti, M. Pastor, and T. Chaussadent, Polymer adhesives in civil engineering: Effect of environmental parameters on thermomechanical properties, 8th Japanese/European Symposium on Composite Materials: tokyo univ sci, pp.16-17, 2002.

L. T. Blankenship, M. N. White, P. M. Puckett, and I. Usa, Vinyl ester resins: versatile resins for composites, Proceedings of the 34th International SAMPE Symposium Cité par Lawrence C. Bank COMPOSITES FOR CONSTRUCTION: Structural Design with FRP Materials, pp.234-245, 1989.

A. Braimah, M. F. Green, and K. A. Soudki, Eliminating Steel from Bridge Deck Slabs by Combining CFRP Tendons with Polypropylene FRC, Proceedings of the Second International Conference on Advanced Composite Materials in Bridges and Structures (ACMBS2), pp.735-742, 1996.

V. Brown and C. Bartholomew, Long-term Deflections of GFRP-Reinforced Concrete Beams, Proceedings of the First International Conference on Composites in Infrastructure (ICCI-96), pp.389-400, 1996.

H. Budelman, R. , and F. S. , Creep Rupture Behaviour of FRP Elements for Prestressed Concrete-Phenomenon, Results and Forecast Models, Proceedings of ACI International Symposium on FRP Reinforcement for Concrete Structures, pp.87-100, 1993.

C. J. Burgoyne, Rational use of advanced composites in concrete. Non metallic (FRP) reinforcement for concrete structures proceedings of the third international symposium, 1997.

C. R. Burke and C. W. Dolan, Flexural Design of Prestressed Beams using FRP tendons " PCI Journal, pp.76-87, 2001.

. Byung-wan, . Jo, and . Ghi-ho-tae-and-byung-yun-kwon, Ductility Evaluation of Prestressed Concrete Beams with CFRP Tendons, Journal of Reinforced Plastics and Composites, vol.23, issue.8, pp.843-859, 2004.

T. I. Campbell, N. G. Shrive, K. A. Soudki, A. Al-mayah, J. P. Keatley et al., Design and evaluation of a wedge-type anchor for fibre reinforced polymer tendons, Canadian Journal of Civil Engineering, vol.27, issue.5, pp.985-992, 2000.
DOI : 10.1139/l00-048

C. Csa, Section 16 -Fiber Reinforced Structures, Canadian Standards Association, Canadian Highways Bridge Design Code, 2000.

C. Csa, -Canadian Highway Bridge Design Code, Final Draft, 2006.

K. K. Chang, Aramid Fibers, ASM Handbook, pp.41-45, 2001.

Y. Chen and V. Li, Effects of transition zone densification on fiber/cement paste bond strength improvement, Advanced Cement Based Materials, vol.5, issue.1, pp.8-17, 1997.
DOI : 10.1016/S1065-7355(97)90010-9

Y. Chen and S. Chu, Effect of silica fume on steel fiber bond characteristics in reactive powder concrete, Cement and Concrete Research, vol.34, issue.7, pp.1167-1172, 2004.
DOI : 10.1016/j.cemconres.2003.12.023

J. W. Chin, T. Nguyen, and K. Aouadi, Effects of Environmental Exposure on Fiber- Reinforced Plastic (FRP) Materials Used in Construction, Journal of Composites Technology and Research, vol.19, issue.4, pp.205-213, 1998.

C. Du-béton, CEB-FIP model code, Great Brintain, vol.416, p.pp, 1990.

J. L. Clarke, Alternative Materials for the Reinforcement and Prestressing of Concrete, p.204, 1993.

J. L. Clarke, O. 'regan, and D. P. , Design of Concrete Structures Reinforced with Fibres Composite Rods, Proceedings of the Second International RILEM Symposium on Non-Metallic (FRP) Reinforcement for Concrete Structures FRPRCS-2, pp.646-653, 1995.

J. O. Conrad, C. E. Bakis, T. E. Boothby, and A. Nanni, Durability of Bond of Various FRP Rods in Concrete Behaviour and modelling of bond of FRP rebars to concrete, Proceedings of CDCC'98, pp.299-310, 1997.

C. E. Manfredi-g and R. R. , Development length of FRP straight rebars, Journal of composites: Part B: Engineering, vol.33, pp.493-504, 2002.

T. E. Cousins, D. W. Johnston, Z. , and P. , Transfer and Development Length of Epoxy Coated and Uncoated Prestressing Strand, PCI Journal, vol.35, issue.4, pp.92-103, 1990.
DOI : 10.15554/pcij.07011990.92.103

J. Currier, Deformation of Prestressed Concrete Beams with FRP Tendons, p.pp, 1995.

I. Daniel and O. Ishai, Engineering Mechanics of Composite Materials, 1994.

V. Dejke and R. Tepfers, Durability and service life prediction of GFRP for concrete reinforcement, Proceedings of FRPRCS-5, pp.505-514, 1997.

D. Larrard, F. Schaller, I. Fuchs, and J. , Effect of the bar diameter on the bond strength of passive reinforcement, ACI Mater J, vol.90, issue.4, pp.333-339, 1993.

C. W. Dolan, FRP Prestressing in the USA, Concrete International, pp.21-24, 1999.

C. W. Dolan, Developments in Non-Metallic Prestressing Tendons, PCI Journal, vol.35, issue.5, p.80, 1990.
DOI : 10.15554/pcij.09011990.80.88

C. W. Dolan and C. R. Burke, Flexural Strength and Design of FRP Prestressed Beams, Proceedings of the Second International Conference on Advanced Composite Materials in Bridges and Structures (ACMBS2), pp.383-390, 1996.

C. W. Dolan, H. R. Hamilton, C. E. Bakis, and A. Nanni, Design Recommendations for Concrete Structures Prestressed With FRP Tendons, Final Report, 2000.

. C. Dolan, FRP Development in the United States", Fibre-Reinforced Plastic "FRP" Reinforcement for Concrete Structures: Properties and Applications, pp.129-163, 1993.

N. Domenico, Bond Properties of CFCC Prestressing Strands in Pretensioned Concrete Beams, p.160, 1995.

N. G. Domenico, Z. I. Mahmoud, and S. H. Rizkalla, Bond Properties of Carbon Fiber Composite Prestressing Strands, ACI Structural Journal, vol.95, issue.3, pp.281-290, 1998.

W. K. Dye, C. E. Bakis, and A. Nanni, Accelerated Testing of Carbon FRP Tendon-Anchor Systems for Post-Stressed Concrete Applications, Proceedings of the First International Conference on Durability of Composites for Construction, pp.463-473, 1998.

M. R. Ehsani, H. Saadatmanesh, N. , and C. T. , Transfer and Flexural Bond Performance of Aramid and Carbon FRP Tendons, PCI Journal, vol.42, issue.1, pp.76-86, 1997.
DOI : 10.15554/pcij.01011997.76.86

F. Ellyin and D. Kujawski, Fatigue Testing and Life Predictions of Fibre glass Reinforced Composites, Advanced Composite Materials in Bridges and Structures, pp.111-118, 1992.

M. A. Erki and S. H. Rizkalla, FRP Reinforcement for Concrete Structures, Concrete International, pp.48-53, 1993.

J. A. Epaarachi and P. D. Clausen, An empirical model for fatigue behavior prediction of glass fibre-reinforced plastic composites for various stress ratios and test frequencies, Composites Part A: Applied Science and Manufacturing, vol.34, issue.4, pp.313-326, 2003.
DOI : 10.1016/S1359-835X(03)00052-6

F. Al-mahmoud, A. Castel, R. François, and C. Tourneur, Effect of surface pre-conditioning on bond of carbon fibre reinforced polymer rods to concrete, Cement and Concrete Composites, vol.29, issue.9, pp.677-689, 2007.
DOI : 10.1016/j.cemconcomp.2007.04.010

A. Z. Fam, S. H. Rizkalla, T. , and G. , Behaviour of CFRP for Prestressing and Shear Reinforcement of Concrete Highwav Bridges, AC1 Structural Journal, vol.94, issue.1, pp.77-86, 1997.

S. S. Faza and H. V. Gangarao, Theoretical and Experimental Correlation of Behaviour of Concrete Beams Reinforced with Fibre Reinforced Plastic Rebars, Fibre- Reinforced-Plastic Reinforcement for Concrete Structures (SP-138, 1993.

. Dolan, American Concrete Institute, pp.599-614

E. Ferrier, L. Michel, . Jurkiewiez-b, and P. Hamelin, Creep behaviour of adhesives used for external FRP strengthening of RC structures Construction and building materials, pp.461-467, 2011.

S. Juni, In Prestressed concrete -design and construction, pp.463-474, 1964.

H. V. Gangarao and P. V. Vijay, Aging of Structural Composites Under Varying Environmental Conditions, Proceedings of the 3rd International Symposium on Non-Metallic (FRP) Reinforcement for Concrete Structures, pp.91-98, 1997.

T. Gentry and C. Hudak, Thermal compatibility of plastic composite reinforcement for concrete, Proceedings of the 2nd Symposium on advanced composite materials in bridges and structures, pp.149-156, 1996.

A. Gerritse, Aramid-based prestressing tendons Alternative Materials for the Reinforcement and Prestressing of Concrete, pp.172-199, 1993.

N. F. Grace, Transfer Length of CFRP/CFCC Strands for Double-T Girders, PCI Journal, vol.45, issue.5, pp.110-126, 2000.
DOI : 10.15554/pcij.09012000.110.126

N. F. Grace and G. Sayed, Ductility of Prestressed Bridges using CFRP Strands, Concrete International, vol.20, issue.6, pp.25-30, 1998.

N. F. Grace, F. C. Navarre, R. B. Nacey, W. Bonus, and L. Collavino, Design-Construction of Bridge Street Bridge ??? First CFRP Bridge in the United States, PCI Journal, vol.47, issue.5, pp.20-35, 2002.
DOI : 10.15554/pcij.09012002.20.35

C. Greco, G. Manfredi, M. Pecce, and R. Realfonzo, Experimental Analysis of Bond Between GFRP Deformed Rebars and Concrete, Proceedings of the 8`h European Conference on Composite Materials ECCM-8, pp.301-308, 1998.

N. L. Hancox and R. M. Mayer, Design data for reinforced plastics, a guide for engineers and designers, 1994.

T. Harada, M. Soeda, T. Enomoto, S. Tokumitsu, M. Khin et al., Behavior of Anchorage for FRP Tendons Using Highly Expansive Material Under Cyclic Loading Non-Metallic Reinforcement for Concrete Structures, Proceedings FRPRCS-3, V. II, pp.719-726, 1997.

M. D. Hayes, K. Garcia, N. Verghese, and J. J. Lesko, The Effects of Moisture on the Fatigue Behavior of a Glass/Vinyl Ester Composite, Proceedings of the 2nd International Conference on Fibre Composites in Infrastructure ICCI'98, pp.1-13, 1998.

H. Co, Task 6 Cable and anchorage technology, state-of-the-art report, 1995.

L. Hollaway, Polymer Composites for Civil and structural Engineering, Blackie Academic & Professional, 1993.
DOI : 10.1007/978-94-011-2136-1

L. E. Holte, C. W. Dolan, and R. J. Shmidt, Anchorage of Non-Metallic Prestressing Tendons, p.pp, 1993.

L. E. Holte, C. W. Dolan, and R. J. Shmidt, Epoxy Socketed Anchors for Non Metallic Prestressing Elements, International Symposium of Fibre-Reinforced Plastic Reinforcement for Concrete Structures, pp.381-400, 1993.

R. Holland, appraisal and repair of reinforced concrete, 1997.
DOI : 10.1680/rc.25837

D. Hull and T. W. Clyne, An Introduction to Composite Materials, 1996.
DOI : 10.1017/CBO9781139170130

A. J. Hyett, W. F. Bawden, and R. D. Reichert, The effect of rock mass confinement on the bond strength of fully grouted cable bolts, International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, vol.29, issue.5, pp.29-503, 1992.
DOI : 10.1016/0148-9062(92)92634-O

K. Ishida and N. Cho, Research on prestressed concrete using FRP rods as prestressed tendons, Proceedings of the Japan Concrete Institute, pp.657-660, 1986.

M. Issa, R. Sen, and A. Amer, Comparative Study of Transfer Length in Fiberglass and Steel Pretensioned Concrete Members, PCI Journal, vol.38, issue.6, pp.52-63, 1993.

L. G. Jaeger, G. Tadros, and A. A. Mufti, Balanced Section, Ductilitv and Deformability in Concrete with FRP Reinforcement, Research Report, issue.2, p.30, 1995.

Y. Jian and F. Zhi, flexural behavior of ultra high performance concrete beams prestressed with cfrp tendons, Proceedings of the 8th International Symposium on Fiber Reinforced Polymer Reinforcement for Concrete Structures, pp.16-18, 2007.

R. Kakihara, M. Kamiyoshi, S. Kumagai, and K. Nortake, A New Aramid Rod for the Reinforcement of Prestressed Concrete Structures, Advanced Composites Materials in the Civil Engineering Structures Proceedings, pp.132-142, 1991.

T. Kanakubo, K. Yonemaru, H. Fukuyama, M. Fujisawa, and Y. Sonobe, Bond Performance of Concrete Member Reinforcement with FRP Bars, Plastic Reinforcement for Concrete Structures -International Symposium, SP-138, American Concrete Institute, pp.767-788, 1993.

Y. Kato, T. Yamaguchi, T. Nishimura, and T. Uomoto, Computational model for deterioration of aramid fibre by ultraviolet rays, Proceedings of the 3rd International Symposium Non-Metallic (FRP) Reinforcement for Concrete Structures, pp.163-170, 1997.

A. Katz, N. Berman, and L. C. Bank, Effect of High Temperature on Bond Strength of FRP Rebars, Journal of Composites for Construction, vol.3, issue.2, pp.73-81, 1999.
DOI : 10.1061/(ASCE)1090-0268(1999)3:2(73)

J. G. Kerstens, W. Bennenk, and J. W. Camp, Prestressing with Carbon Composite Rods: A Numerical Method for Developing Reusable Prestressing Systems, ACI Structural Journal, vol.95, issue.1, pp.43-50, 1998.

P. Kim, M. , and U. , CFRP Cables for Large Structures, Proceedings of the Specialty Conference on Advanced Composites Materials in Civil Engineering Structures, pp.233-244, 1991.

K. Kobayashi and R. Cho, A Study on Development on Fiber Reinforced Plastics Rods for Pre-stressing Tendons (part 1), Seisan-kenjyu Journal of Institute of Industrial Science, vol.36, issue.8, 1984.

D. R. Lankard, N. Thompson, M. M. Sprinkel, and Y. P. Virmani, Grouts for bond post-tensioned concrete construction: protecting prestressing steel from corrosion, ACI Materials Journal, issue.5, pp.90-406, 1993.

J. M. Lees and C. J. Burgoyne, Influence of Bond on Rotation Capacity of Concrete Pretensioned with AFRP, Second International Conference in Advanced Composite Materials in Bridges and Structures, pp.901-908, 1996.

J. M. Lees and C. J. Burgoyne, Experimental Study of Influence of Bond on Flexural Behaviour of Concrete Beams Pretensioned with Aramid Fiber Reinforced Plastics, ACI Structural Journal, vol.96, issue.3, pp.377-385, 1999.

F. Leonhardt, Prestressed concrete, design and construction, 1964.

L. Roy-robert, . Hoai-son, . Pham, and . Foret-gilles, New wood composite bridges European journal of environmental and civil engineering Y, pp.1125-1139, 2009.

H. Y. Leung and C. Burgoyne, Prestressed Concrete Beam with Aramid Fibre Compression Confinement and External Tendons, Proceedings of the Fifth international conference on Fibre-Reinforced Plastics for Reinforced Concrete Structures (FRPRCS-5), pp.875-884, 2001.

V. C. Li, H. Stang, and H. Krenchel, Micromechanics of crack bridging in fibre-reinforced concrete, Materials and Structures, vol.4, issue.3, pp.486-494, 1993.
DOI : 10.1007/BF02472808

Z. Lu, T. E. Boothby, C. E. Bakis, and A. Nanni, Transfer and Development Lengths of FRP Prestressing Tendons, PCI Journal, vol.45, issue.2, pp.80-91, 2000.
DOI : 10.15554/pcij.03012000.84.95

L. A. Lutz and P. Gergely, Mechanics of bond and slip of deformed bars in concrete, 1967.

A. Machida, State-of-the-Art Report on Continuous Fiber Reinforcing Materials, Society of Civil Engineers (JSCE), 1993.

A. Machida, Recommendation for design and construction of concrete structures using continuous fiber reinforcing materials, Concrete Engineering Series, vol.23, 1997.

M. R. Mahmoud, N. G. Taha1, and . Shrive, Ultra High Performance Concrete (UHPC) Anchors For Posttensioning cfrp Tendons: A Step Towards Metal-Free Structures, Concrete international, pp.35-40, 2003.

Z. I. Mahmoud and S. H. Rizkalla, Bond of CFRP Prestressing Reinforcement, Advanced Composite Materials in Bridges and Structures, pp.877-884, 1996.

A. Maissen, D. Smet, and C. A. , Comparison of Concrete Beams Prestressed with Carbon Fibre Reinforced Plastic and Steel Strands". in Non-Metallic (FRP) Reinforcement for Concrete Structures, Proceedings of the Second International RILEM Symposium (FRPRCS-2), pp.379-386, 1995.

L. J. Malvar, Tensile and Bond Properties of GFRP Reinforcing Bars, ACI Material Journal, vol.92, issue.3, pp.276-285, 1994.

L. J. Malvar and J. Bish, Grip Effects in Tensile Testing of FRP Bars, Proceedings of the Second International RILEM Symposium (FRPRCS-2), Non-Metallic (FRP) Reinforcement for Concrete Structures, pp.108-115, 1995.

J. F. Mandell, Fatigue Behavior of Fiber-Resin Composites. Developments in Reinforced Plastics, pp.67-107, 1982.

S. Mathys and L. Taerwe, long-term Behaviour of Concrete Slabs Pre-tensioned with AFRP or Prestressing Steel, Durability of Fibre Reinforced Polymer (FRP) Composites for Construction, pp.95-106, 1998.

A. S. Maxwell, W. R. Broughton, G. Dean, and G. D. Sims, Review of accelerated ageing methods and lifetime prediction techniques for polymeric materials, 2005.

K. S. Mckay and M. A. Et-erki, Flexural behaviour of concrete beams pretensioned with aramid fibre reinforced plastic tendons, Canadian Journal of Civil Engineering, vol.20, issue.4, pp.688-695, 1993.
DOI : 10.1139/l93-085

U. Meier, Carbon Fiber-Reinforced Polymers: Modern Materials in Bridge Engineering, Structural Engineering International, vol.2, issue.1, pp.7-12, 1992.
DOI : 10.2749/101686692780617020

U. Meier, Extending the Life of Cables by the Use of Carbon Fibres, IABSE Symposium, pp.1235-1240, 1995.

H. C. Mertol, S. Rizkalla, P. Scott, J. M. Lees, and R. El-hacha, Durability and Fatigue Behavior of High-Strength Concrete Beams Prestressed with CFRP bars, Case Histories and Use of FRP for Prestressing Applications, pp.1-20, 2006.

D. Mitchell, W. D. Cook, A. A. Khan, and T. Tham, Influence of High Strength Concrete on Transfer and Development Length of Pretensioning Strand, PCI Journal, vol.38, issue.3, pp.52-66, 1993.
DOI : 10.15554/pcij.05011993.52.66

S. Mochida and T. Hoshijima, Evaluation of anchorage capacity for ground anchor using high strength carbon materials, Proceedings of the 2nd International Conference on Advanced Composite Materials in Bridges and Structures, pp.11-14, 1996.

A. A. Mufti, J. P. Newhook, and G. Tadros, Deformability versus ductility in concrete beams with FRP reinforcement The Canadian Society of Civil Engineering, Advanced Composite Materiels in Bridges and Structures- 2 nd international conference, pp.189-199, 1996.

A. E. Naaman, Partially Prestressed Beams with Carbon Fibre Composite Strands: Preliminary Tests Evaluation " , in Fiber-Reinforced-Plastic-Reinforcement for Concrete Structures, International Symposium, p.138, 1993.

A. E. Naaman and S. M. Jeong, Structural Ductility of Concrete Beams Prestressed with FRP Tendons Non-metallic (FRP) Reinforcement for Concrete Structures, Proceedings of the Second International RILEM Symposium (FRPRCS-2), Non-Metallic (FRP) Reinforcement for Concrete Structures, pp.379-386, 1995.

A. Nanni, C. E. Bakis, and T. O. Dixon, Performance of FRP Tendon-Anchor Systems for Prestressed Concrete Structures, PCI Journal, vol.41, issue.1, pp.34-43, 1996.
DOI : 10.15554/pcij.01011996.34.44

N. , A. Bakis, C. E. Boothby, and T. E. , Tests Methods for FRP-Concrete Systems Subjected to Mechanical Loads: State of the Art Review, Journal of Reinforced Plastics and Composites, vol.14, issue.6, pp.524-558, 1995.

A. Nanni, C. E. Bakis, P. E. O-'niel, and T. D. Dixon, Performance of FRP Tendon-Anchor Systems for Prestressed Concrete Structures, PCI Journal, vol.41, issue.1, pp.34-43, 1996.
DOI : 10.15554/pcij.01011996.34.44

T. Odagiri, K. Matsumoto, and H. Nakai, Fatigue and Relaxation Characteristics of Continuous Aramid Fibre Reinforced Plastic Rods, Proceedings of the Third International Symposium on Non-Metallic (FRP) Reinforcement for Concrete Structures (FRPRCS-3), 1997.

X. W. Patrick and . Zou, Flexural Behaviour and Deformability of Fiber Reinforced Polymer Prestressed Concrete Beams, Journal of Composite for Construction, vol.7, issue.n°4, pp.275-284, 2003.

K. Pilakoutas, Composites in Concrete Construction in, Failure Analysis of Industrial Composite Materials, McGraw-Hill, Professional Engineering, pp.449-497, 2000.

A. H. Rahman, C. Kingsley, J. Richard, and J. Crimi, Experimental Investigation of the Mechanism of Deterioration of FRP Reinforcement for Concrete, Proceedings of the 2nd International Conference on Fibre Composites in Infrastructure ICCI'98, pp.501-511, 1998.

M. M. Reda, E. Y. Sayed-ahmed, and N. G. Shrive, Towards a New Non-Metallic Anchorage System for Post-Tensioned Applications With Carbon Fibre Reinforced Plastic Tendons, Proceedings of the 42nd International SAMPE Symposium, pp.288-297, 1997.

R. Taha, M. M. Shrive, and N. C. , New Concrete Anchors for Carbon Fiber- Reinforced Post-Tensioned Tendons?Part 1: State-of-the-Art Review/ Design, ACI Structural Journal, vol.100, issue.1, pp.86-95, 2003.

R. Taha, M. M. Shrive, and N. C. , New Concrete Anchors for Carbon Reinforced-Reinforced Post-Tensioned Tendons?Part 2: Development/Experimental Investigation, ACI Structural Journal, vol.100, issue.1, pp.96-104, 2003.

J. Resplendino and J. Petitjean, Utra-High-Performance Concrete : First Recommendations and Examples of Application, The fifth International Symposium on High Performance Computing, 18 p, 2003.

J. Resplendino, First recommendations for Ultra-High Performance Concretes and examples of applications, Proceedings of the International Symposium on Ultra High Performance Concrete, pp.79-89, 2004.

J. Resplendino and S. Bouteille, Construction de deux ponts routiers en béton fibré ultra performant (BFUP) " , Bulletin Ouvrages d'Art, SETRA -Service d'études techniques des routes et autoroutes, pp.2-11, 2006.

J. Resplendino and S. Bouteille, Tabliers de ponts réalisés en béton fibré ultra performant (BFUP) et en matériau composite (fibre de verre) , Actes des journées techniques organisées par l'Association Française de Génie Civil (AFGC): Le développement durable, une exigence d'innovation pour le génie civil, 2007.

S. Rizkalla and A. Mufti, Reinforcing Concrete with Fibre Reinforced Polymers, ISIS Design Manual No, vol.3, 2001.

V. Rossetti, D. Galeota, and M. Giammatteo, Local bond stress-slip relationships of glass fibre reinforced plastic bars embedded in concrete, Materials and Structures, vol.245, issue.6, pp.340-344, 1995.
DOI : 10.1007/BF02473149

F. S. Rostasy and H. Budelmann, Principles of Design of FRP Tendons and Anchorages for Post-Tensioned Concrete " ACI SP138-38, pp.633-650, 1993.

F. Rostásy, State-of-the-Art Report on FRP Materials, FIP Report, 1996.

F. Rostasy, On Durability of FRP in Aggressive Environments, Proceedings of the 3rd International Symposium on Non-Metallic (FRP) Reinforcement for Concrete Structures, pp.107-114, 1997.

F. S. Rostàsy, Draft Guidelines for the Acceptance Testing of FRP Posttensioning Tendons, Journal of Composites for Construction, vol.2, issue.1, pp.2-6, 1998.
DOI : 10.1061/(ASCE)1090-0268(1998)2:1(2)

B. W. Russell and N. H. Burns, Measured Transfer Lengths of 0.5 and 0.6 in. Strands in Pretensioned Concrete, PCI Journal, vol.41, issue.5, pp.44-63, 1996.
DOI : 10.15554/pcij.09011996.44.65

H. Saadatmanesh and F. E. Tannous, Relaxation, Creep and Fatigue Behavior of Carbon Fiber Reinforced Plastic Tendons, ACI Materials Journal, vol.96, issue.2, pp.143-153, 1999.

H. Saadatmanesh and F. E. Tannous, Long-term Behavior of Aramid Fiber Reinforced Plastic (AFRP) Tendons, ACI Materials Journal, vol.96, issue.3, pp.297-305, 1999.

H. Saadatmanesh and F. Tannous, Durability of FRP rebars and tendons, Proceedings of the 3rd International Symposium on Non-Metallic (FRP) Reinforcement for Concrete Structures, pp.147-154, 1997.

T. Sakai, T. Kanakubo, K. Yonemaru, and H. Fukuyama, Bond splitting behaviour of continous fibre-reinforced concrete members, Fourth International Symposium, Fiber Reinforced Polymer reinforcement for reinforced concrete structures pp, pp.1131-1144, 1999.

I. Sasaki, I. Nishizaki, H. Sakamoto, K. Katawaki, and Y. Kawamoto, Durability Evaluation of FRP Cables by Exposure Tests, Proceedings of the 3rd International Symposium on Non-Metallic (FRP) Reinforcement for Concrete Structures, pp.131-137, 1997.

E. Y. Sayed-ahmed and N. G. Shrive, A new steel anchorage system for post-tensioning applications using carbon fibre reinforced plastic tendons, Canadian Journal of Civil Engineering, vol.25, issue.1, pp.113-127, 1998.
DOI : 10.1139/l97-054

J. R. Schaff and . Handbook, Fatigue and Life Prediction, pp.252-258, 2001.

R. A. Schapery, Thermal Expansion Coefficients of Composite Materials Based on Energy Principles, Journal of Composite Materials, vol.23, issue.3, pp.380-404, 1968.
DOI : 10.1177/002199836800200308

M. Scheibe and F. S. Rostasy, Stress-rupture of AFRP subjected to alkaline and elevated temperatures, Proceeding of the Second International Symposium Non-Metallic FRPCS-2 (FRP) Reinforcement for Concrete Structures, pp.67-73, 1995.

H. Seki, K. Sekijima, and T. Konno, Test Method on Creep of Continuous Fiber Reinforcing Materials, Proceedings of the Third International Symposium on Non-Metallic (FRP) Reinforcement for Concrete Structures (FRPRCS-3), pp.195-202, 1997.

R. Sen, D. Mariscal, and M. Shahawy, Durabilitv of Fiber glass Pretensioned Bearns, AC1 Structural Journal, vol.90, issue.5, pp.525-533, 1993.

R. Sen, M. Shahawy, J. Rosas, and S. Sukumar, Durability of AFRP & CFRP pretensioned piles in a marine environment, Proceedings of the 3rd International Symposium on Non-Metallic (FRP) Reinforcement for Concrete Structures, pp.123-130, 1997.

R. Sen, M. Shahawy, J. Rosas, and S. Sukumar, Durability of Aramid Pretensioned Elements in a Marine Environment, ACI Structural Journal, vol.95, issue.5, pp.578-587, 1998.

A. Setra, Béton fibrés à ultra-hautes performances, (Ultra high performance fibre-reinforced concretes " , recommandations provisoires, 2002.

R. B. Seymour, Polymers for Engineering Applications Materials Park, OH. Cité par Lawrence C. Bank composites for construction: structural design with frp materials, 1987.

M. A. Shahawy, M. Issa, and B. Batchelor, Strand Transfer Lengths in Full Scale AASHTO Prestressed Concrete Girders, PCI Journal, vol.37, issue.3, pp.84-96, 1992.
DOI : 10.15554/pcij.05011992.84.96

E. Shaheen, Carbon Fiber Reinforced Reactive Powder Concrete Anchorage System, 2004.

P. Sheard, J. L. Clarke, M. Dill, G. Hammersley, and D. Richardson, EUROCRETE- Taking Account of Durability for Design of FRP Reinforced Concrete Structures, Proceedings of the 3rd International Symposium on Non-Metallic (FRP) Reinforcement for Concrete Structures, pp.75-82, 1997.

Y. Sonobe, H. Fukuyama, T. Okamoto, N. Kani, K. Kobayashi et al., Design Guidelines of FRP Reinforced Concrete Building Structures, Journal of Composites for Construction, vol.1, issue.3, pp.90-113, 1997.
DOI : 10.1061/(ASCE)1090-0268(1997)1:3(90)

K. Soudki, Evaluation of Anchors for CFRP tendons " Final Report No.UTC R123. Center for Infrastructure Engineering Studies/UTC program,Department of Transportation Research and Special Programs Administration, 2005.

K. Soudki, M. F. Green, and F. D. Clapp, Transfer Length of Carbon Fiber Rods in Precast Pretensioned Concrete Beams, PCI Journal, vol.42, issue.5, pp.78-87, 1997.
DOI : 10.15554/pcij.09011997.78.87

A. Spasojevic, Structual implications of ultra-high performance fibre-reinforced concrete in bridge design, Thèse EPFL, 285 p, 2008.

T. Starr and I. Usa, Pultrusion for Engineers, Boca Raton, FL. Cité par Lawrence C. Bank COMPOSITES FOR CONSTRUCTION: Structural Design with FRP Materials, 2000.
DOI : 10.1533/9781855738881

G. L. Steckel, G. F. Hawkins, and J. L. Bauer, Environmental Durability of Composites for Seismic Retrofit of Bridge Columns, Proceedings of the 2nd International Conference on Fibre Composites in Infrastructure ICCI'98, pp.460-475, 1998.

. T. Stratford, The Shear of Concrete with Elastic FRP reinforcement, 2001.

H. Taniguchi, H. Mutsuyoshi, T. Kita, and A. Machida, Ductile Behaviour of Beams using FRP as Tendons and Transverse Reinforcement, Fibre-Reinforced-Plastic Reinforcement for Concrete Structures -International Symposium, p.138, 1993.

S. Tastani and S. Pantazopoulou, Bond of GFRP Bars in Concrete: Experimental Study and Analytical Interpretation, Journal of Composites for Construction, vol.10, issue.5, pp.381-391, 2006.
DOI : 10.1061/(ASCE)1090-0268(2006)10:5(381)

B. Tighiouart, B. Benmokrane, and U. Gao, Investigation of bond in concrete member with fibre reinforced polymer (FRP) bars, Construction and Building Materials, vol.12, issue.8, pp.453-462, 1998.
DOI : 10.1016/S0950-0618(98)00027-0

R. Tepfers, R. Apinis, J. Modniks, and V. Tamuzs, Tests with Specially made FRP Reinforcement Rods with intention to obtain Ductile Behavior, Proceedings of the Fifth international conference on Fibre-Reinforced Plastics for Reinforced Concrete Structures (FRPRCS-5), pp.1083-1092, 2001.

R. Tepfers, Cracking of concrete cover along anchored deformed reinforcing bars, Magazine of Concrete Research, pp.3-12, 1979.
DOI : 10.1680/macr.1979.31.106.3

L. Taerwe and I. Pallemans, Force Transfer of AFRP Bars in Concrete Prisms, Proceedings of the Second International RILEM Symposium, pp.154-163, 1995.

R. Tepfers, Bond clause proposals for FRP bars/rods in concrete based on CEB/FIP Model Code 90. Part 1: Design bond stress for FRP reinforcing bars, Structural Concrete, vol.7, issue.2, pp.47-55, 2006.
DOI : 10.1680/stco.2006.7.2.47

B. Tighiouart, B. Benmokrane, and U. Gao, Investigation of bond in concrete member with fibre reinforced polymer (FRP) bars, Construction and Building Materials, vol.12, issue.8, pp.453-462, 1998.
DOI : 10.1016/S0950-0618(98)00027-0

. Tokyo-rope-mfg, . Co, and . Ltd, Technical Data on CFCC?, 1993.

R. Taerwe, FRP Developments and Applications in Europe, Fiber-Reinforced- Plastic Reinforcement for Concrete Structures: Properties and Applications, pp.99-114, 1993.

F. Tomosawa and T. Nakatsuji, Evaluation of ACM Reinforcement Durability By Exposure Test, Proceedings of the 3rd International Symposium on Non-Metallic (FRP) Reinforcement for Concrete Structures, pp.139-146, 1997.

S. Tottori and H. Wakui, Shear Capacity of Reinforced and Prestressed Concrete Beams, using FRP Reinforcement in Fibre-Reinforced-Plastic Reinforcement for Concrete Structures, International Symposium, p.138, 1993.

H. Toutanji and T. El-korchi, Tensile Durability Performance of Cementitious Composites Externally Wrapped with FRP Sheets, Proceedings of the 2nd International Conference on Fibre Composites in Infrastructure ICCI'98, pp.410-421, 1998.

T. Uomoto, Fatigue Strength of FRP Rods for Concrete Reinforcement, Building for the 21st Century, pp.1659-1664, 1995.

T. Uomoto, T. Nishimura, and H. Ohga, Static and Fatigue Strength of FRP Rods for Concrete Reinforcement, Proceedings of the Second International RILEM Symposium (FRPRCS-2) Taerwe), E & FN Spon, pp.100-107, 1995.

T. Uomoto and T. Nishimura, Deterioration of Aramid, Glass, and Carbon Fibers Due to Alkali, Acid, and Water in Different Temperatures, Fourth International Symposium on fibre Reinforced Polymer Reinforcement for Reinforced Concrete Structures, SP 188, American Concrete Institute, International, pp.515-522, 1999.

T. Uomoto, Durability of FRP as Reinforcement for Concrete Structures, Design Considerations for Ductility of Prestressed beams with AFRP and CFRP tendons, Advanced Composite Materials in Bridges and Structures, 3'' International Conference, pp.3-17, 2000.

T. Uomoto, Durability considerations for FRP reinforcements, Proceedings of the Fifth International Symposium (FRPRCS-5), pp.17-32, 2001.

N. E. Verghese, M. Hayes, K. Garcia, C. Carrier, J. Wood et al., Temperature Sequencing During Hygrothermal Aging of Polymers and Polymer Matrix Composites: The Reverse Thermal Effect, Proceedings of the 2nd International Conference on Fibre Composites in Infrastructure ICCI'98, pp.720-739, 1998.

F. T. Wallenberger, J. C. Watson, and L. Hong, Glass Fibers, pp.27-34, 2001.

P. J. Walsh and . Handbook, Carbon Fibres, pp.35-40, 2001.

J. M. Walton and Y. T. Yeung, The Fatigue Performance of Structural Strands of Pultruded Composite Rods, Journal of the Institute of Mechanical Engineering, issue.28686, pp.315-320, 1986.

Z. Wang, Y. Goto, and O. Joh, Bond strength of various types of fibre reinforced plastic rods, Proceedings of 4th international Symposium on Fiber Reinforced Polymer Reinforcement for Reinforced Concrete Structures, FRPRCS-4 USA; ACI-SP-188, pp.1117-1130, 1999.

T. Yamaguchi, Y. Kato, T. Nishimura, and I. Uomoto, Creep Rupture of FRP Rods Made of Aramid, Carbon and Glass Fibers, Proceedings of the Third International Symposium on Non-Metallic (FRP) reinforcement for Concrete Structures (FRPRCS-3), pp.179-186, 1997.

B. Zhang, Experimental and Theoretical Investigations on New Bond-Type Anchorage System for Post-Tensioning Applications with FRP Tendons, 2002.

R. C. Zellers, V. Ramakrishnan, V. N. Rajpathak, Y. , and S. , Evaluation of bond strength with polypropylene fiber reinforced concrete, Proceedings of the 4th Materials Engineering Conference on Materials for the New Millennium, pp.10-14, 1996.