A. Kirubakaran, S. Jain, and R. K. Nema, A review on fuel cell technologies and power electronic interface, Renewable and Sustainable Energy Reviews, vol.13, issue.9, pp.2430-2440, 2009.
DOI : 10.1016/j.rser.2009.04.004

W. and G. Coors, Protonic ceramic fuel cells for high-efficiency operation with methane, Journal of Power Sources, vol.118, issue.1-2, pp.150-156, 2003.
DOI : 10.1016/S0378-7753(03)00072-7

H. Iwahara, T. Esaka, H. Uchida, and N. Maeda, Proton conduction in sintered oxides and its application to steam electrolysis for hydrogen production, Solid State Ionics, vol.3, issue.4, p.359, 1981.
DOI : 10.1016/0167-2738(81)90113-2

J. Tolchard, Solid: Protons. Encyclopedia of Electrochemical Power Sources, pp.188-194, 2009.
DOI : 10.1016/b978-044452745-5.00019-8

K. D. Kreuer, On the complexity of proton conduction phenomena, Solid State Ionics, vol.136, issue.1-2, pp.149-160, 2000.
DOI : 10.1016/S0167-2738(00)00301-5

H. Iwahara, Technological challenges in the application of proton conducting ceramics, Solid State Ionics, vol.77, pp.289-298, 1995.
DOI : 10.1016/0167-2738(95)00051-7

K. S. Knight, Structural phase transitions, oxygen vacancy ordering and protonation in doped BaCeO3: results from time-of-flight neutron powder diffraction investigations, Solid State Ionics, vol.145, issue.1-4, pp.275-294, 2001.
DOI : 10.1016/S0167-2738(01)00952-3

K. D. Kreuer, Aspects of the formation and mobility of protonic charge carriers and the stability of perovskite-type oxides, Solid State Ionics, vol.125, issue.1-4, pp.285-302, 1999.
DOI : 10.1016/S0167-2738(99)00188-5

G. Ma, T. Shimura, and H. Iwahara, Simultaneous doping with La3+ and Y3+ for Ba2+- and Ce4+-sites in BaCeO3 and the ionic conduction, Solid State Ionics, vol.120, issue.1-4, pp.51-60, 1999.
DOI : 10.1016/S0167-2738(99)00005-3

J. Hafsaoui, Membrane duale de reformage et de filtration pour la production d'hydrogene par reaction de craquage de methane, 2009.
URL : https://hal.archives-ouvertes.fr/tel-00425050

E. Ivers-tiffée, Solide: Oxygen ions. Encyclopedia of Electrochemical Power Sources, pp.181-187, 2009.

J. A. Kilner, Fast oxygen transport in acceptor doped oxides, Solid State Ionics, vol.129, issue.1-4, pp.13-23, 2000.
DOI : 10.1016/S0167-2738(99)00313-6

J. A. Kilner and B. C. Steele, Nonstoichiometric Oxides, 1981.

D. Y. Wang, D. S. Park, J. Griffith, and A. S. Nowick, Oxygen-ion conductivity and defect interactions in yttria-doped ceria???, Solid State Ionics, vol.2, issue.2, p.95, 1981.
DOI : 10.1016/0167-2738(81)90005-9

J. A. Kilner, Fast anion transport in solids, Solid State Ionics, vol.8, issue.3, p.201, 1983.
DOI : 10.1016/0167-2738(83)90017-6

V. V. Kharton, F. M. Marques, and A. Atkinson, Transport properties of solid oxide electrolyte ceramics: a brief review, Solid State Ionics, vol.174, issue.1-4, pp.135-149, 2004.
DOI : 10.1016/j.ssi.2004.06.015

E. Richard, E. R. Mistler, and . Twiname, Tape Casting -theory and practice, 2000.

R. Costa, Contribution a la mise en forme d'une pile a combustible du type P.C.F.C, 2009.

R. Moreno, The role of slip additives in tape-casting technology: part i -solvents and dispersants. The American Ceramic Society Bulletin, pp.1521-1530, 1992.

A. Sanson, P. Pinasco, and E. Roncari, Influence of pore formers on slurry composition and microstructure of tape cast supporting anodes for SOFCs, Journal of the European Ceramic Society, vol.28, issue.6, pp.1221-1226, 2008.
DOI : 10.1016/j.jeurceramsoc.2007.10.001

A. Loey, R. D. Salam, H. Matthews, and . Robertson, Pyrolysis of polyvinyl butyral (pvb) binder in thermoelectric green tapes, Journal of European Ceramic Society, vol.20, pp.1375-1383, 2000.

C. Gabrielli, Identification of electrochemical processes by frequence response, 1980.

Z. Stoynov and D. Vladikova, Differential Impedance Analysis, 2005.

I. Epelboin, M. Keddam, O. R. Mattos, and H. Takenouti, The dissolution and passivation of Fe and Fe-Cr alloys in acidified sulphate medium: Influences of pH and Cr content, Corrosion Science, vol.19, issue.12, pp.1105-1112, 1979.
DOI : 10.1016/S0010-938X(79)80128-6

Z. Stoynov, D. Vladikova, G. Raikova, A. S. Thorel, A. Chesnaud et al., Impedance spectroscopy studies of dual membrane fuel cell, Journal of Electrochemical Acta, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00662342

J. W. Gibbs, Thermodynamische Studien, 1986.

M. Zunic, L. Chevalier, A. Radojkovic, G. Brankovic, Z. Brankovic et al., Influence of the ratio between Ni and BaCe0.9Y0.1O3????? on microstructural and electrical properties of proton conducting Ni???BaCe0.9Y0.1O3????? anodes, Journal of Alloys and Compounds, vol.509, issue.4, pp.1157-1162, 2011.
DOI : 10.1016/j.jallcom.2010.09.144

W. Z. Zhu and S. C. Deevi, A review on the status of anode materials for solid oxide fuel cells, Materials Science and Engineering: A, vol.362, issue.1-2, pp.228-239, 2003.
DOI : 10.1016/S0921-5093(03)00620-8

R. J. Gorte, J. M. Vohs, and S. Mcintosh, Recent developments on anodes for direct fuel utilization in SOFC, Solid State Ionics, vol.175, issue.1-4, pp.1-6, 2004.
DOI : 10.1016/j.ssi.2004.09.036

M. Fontaine, Y. Larring, R. Haugsrud, T. Norby, K. Wiik et al., Novel high temperature proton conducting fuel cells: Production of La0.995Sr0.005NbO4????? electrolyte thin films and compatible cathode architectures, Journal of Power Sources, vol.188, issue.1, pp.106-113, 2009.
DOI : 10.1016/j.jpowsour.2008.10.030

G. C. Mather, F. M. Figueiredo, D. P. Fag, T. Norby, J. R. Jurado et al., Synthesis and characterisation of Ni???SrCe0.9Yb0.1O3????? cermet anodes for protonic ceramic fuel cells, Solid State Ionics, vol.158, issue.3-4, pp.333-342, 2003.
DOI : 10.1016/S0167-2738(02)00904-9

J. Rossmeisl and W. G. Bessler, Trends in catalytic activity for SOFC anode materials, Solid State Ionics, vol.178, issue.31-32, pp.1694-1700, 2008.
DOI : 10.1016/j.ssi.2007.10.016

A. Bieberle and L. J. Gauckler, State-space modeling of the anodic SOFC system Ni, H2???H2O???YSZ, Solid State Ionics, vol.146, issue.1-2, p.23, 2002.
DOI : 10.1016/S0167-2738(01)01004-9

R. M. Clemmer and S. F. Corbin, Influence of porous composite microstructure on the processing and properties of solid oxide fuel cell anodes, Solid State Ionics, vol.166, issue.3-4, pp.251-259, 2004.
DOI : 10.1016/j.ssi.2003.12.009

K. Swadesh, A. Pratihar, R. N. Das-sharma, H. S. Basu, and . Maiti, Preparation of nickel coated ysz powder for application as an anode for solid oxide fuel cells, Journal of Power Sources, vol.129, pp.138-142, 2004.

T. H. Lee, S. E. Dorris, and U. Balachandran, Thin film preparation and hydrogen pumping characteristics of BaCe0.8Y0.2O3?????, Solid State Ionics, vol.176, issue.15-16, pp.1479-1484, 2005.
DOI : 10.1016/j.ssi.2005.03.016

J. Stephen and . Skinner, Recent advances in perovskite-type materials for sofc cathodes, Fuel Cel ls Bul l, vol.3, pp.113-121, 2001.

E. Maguire, B. Gharbage, F. M. Marques, and J. A. Larincha, Cathode materials for intermediate temperature SOFCs, Solid State Ionics, vol.127, issue.3-4, pp.329-335, 2000.
DOI : 10.1016/S0167-2738(99)00286-6

L. M. Navarro, F. M. Marques, and J. R. Frade, n-Type Conductivity in Gadolinia-Doped Ceria, Journal of The Electrochemical Society, vol.144, issue.1, p.267, 1997.
DOI : 10.1149/1.1837395

L. Tai, M. M. Nasrallah, H. U. Anderson, D. M. Sparlin, and S. R. Sehlin, Structure and electrical properties of la 1?x sr x co 1?y fe y o 3 . part 1. the system la 0, Solid State Ionics, vol.8, issue.76, pp.0-2, 1995.

L. Tai, M. M. Nasrallah, H. U. Anderson, D. M. Sparlin, and S. R. Sehlin, Structure and electrical properties of la 1?x sr x co 1?y fe y o 3 . part 1. the system la 1?x srxco 0.2 fe0, pp.273-283, 1995.

F. Tietz, V. A. Haanappel, A. Mai, J. Mertens, and D. Stover, Performance of LSCF cathodes in cell tests, Journal of Power Sources, vol.156, issue.1, pp.20-22, 2006.
DOI : 10.1016/j.jpowsour.2005.08.015

M. C. Tucker, Progress in metal-supported solid oxide fuel cells: A review, Journal of Power Sources, vol.195, issue.15, pp.4570-4582, 2010.
DOI : 10.1016/j.jpowsour.2010.02.035

A. Mineshige, K. Fukushima, S. Okada, T. Kikuchi, M. Kobune et al., Porous Metal Tubular Support for Solid Oxide Fuel Cell Design, Electrochemical and Solid-State Letters, vol.9, issue.9, pp.427-429, 2006.
DOI : 10.1149/1.2218301

C. Hwang, C. Tsai, C. Lo, and C. Sun, Plasma sprayed metal supported YSZ/Ni???LSGM???LSCF ITSOFC with nanostructured anode, Journal of Power Sources, vol.180, issue.1, pp.132-142, 2008.
DOI : 10.1016/j.jpowsour.2008.01.075

T. Ishihara, J. Yan, M. Shinagawa, and H. Matsumoto, Ni???Fe bimetallic anode as an active anode for intermediate temperature SOFC using LaGaO3 based electrolyte film, Electrochimica Acta, vol.52, issue.4, pp.1645-1650, 2006.
DOI : 10.1016/j.electacta.2006.03.103

P. Bance, N. P. Brandon, B. Girvan, P. Holbeche, S. O. Dea et al., Spinning-out a fuel cell company from a UK University???2 years of progress at Ceres Power, Journal of Power Sources, vol.131, issue.1-2, pp.86-90, 2004.
DOI : 10.1016/j.jpowsour.2003.11.077

H. C. Park and A. V. Virkar, Bimetallic (Ni???Fe) anode-supported solid oxide fuel cells with gadolinia-doped ceria electrolyte, Journal of Power Sources, vol.186, issue.1, pp.133-137, 2009.
DOI : 10.1016/j.jpowsour.2008.09.080

N. Minh and T. Takahashi, Science and Technology of Ceramic Fucel Cells.E l s e v i e r, 1995.

T. Ou, F. Delloro, C. Nicolella, W. G. Bessler, and A. Thorel, Mathematical model of mass and charge transport and reaction in the central membrane of the ideal-cell, In ECS Transactions, vol.25, pp.1295-1304, 2009.

X. Deng and A. Petric, Geometrical modeling of the triple-phase-boundary in solid oxide fuel cells, Journal of Power Sources, vol.140, issue.2, pp.297-303, 2005.
DOI : 10.1016/j.jpowsour.2004.08.046

J. R. Wilson, W. Kobsiriphat, R. Mendonza, H. Chen, J. M. Hiller et al., Three-dimensional reconstruction of a solid-oxide fuel-cell anode, Nature Materials, vol.59, issue.7, pp.541-544, 2006.
DOI : 10.1149/1.2055073

B. Kenney, M. Valdmanis, C. Baker, J. G. Pharoah, and K. Karan, Computation of TPB length, surface area and pore size from numerical reconstruction of composite solid oxide fuel cell electrodes, Journal of Power Sources, vol.189, issue.2, pp.1051-1059, 2009.
DOI : 10.1016/j.jpowsour.2008.12.145

C. Avinash, M. Kak, and . Slaney, Principles of Computerized Tomographic Imaging, 1988.

. Princeton, Phase constrast imaging technique

T. W. Ridler and S. Calvard, Picture thresholding using an iterative selection method, IEEE Transactions on systems, pp.630-632, 1978.

C. Peyrega, Prediction des proprietes acoustiques de materiaux fibreux heterogenes a partir de leur microstructure 3D, 2010.
URL : https://hal.archives-ouvertes.fr/pastel-00568918

P. Frank, D. P. Incropera, and . Dewitt, Fundamentals of Heat and Mass Transfer, 2001.

H. Schlichting, Boundary Layer Theory, 1979.
DOI : 10.1007/978-3-662-52919-5

W. G. Bessler, J. Warnatz, and D. G. Goodwin, The influence of equilibrium potential on the hydrogen oxidation kinetics of SOFC anodes, Solid State Ionics, vol.177, issue.39-40, p.3371, 2007.
DOI : 10.1016/j.ssi.2006.10.020

J. P. Huijsmans, Ceramics in solid oxide fuel cells, Current Opinion in Solid State and Materials Science, vol.5, issue.4, pp.317-323, 2001.
DOI : 10.1016/S1359-0286(00)00034-6

F. Tietz, H. Buchkremer, and D. Stover, Components manufacturing for solid oxide fuel cells. Solid State Ionics, pp.152-153373, 2002.

W. Munch, K. D. Kreuer, G. Seifert, and J. Maier, Proton diffusion in perovskites: comparison between baceo 3 , bazro 3 ,s r t i o 3 and catio 3 using quantum molecular dynamics, Solid State Ionics, pp.183-189, 2000.

S. Research and . Branch, Imagej: User guide

G. Schiller, R. H. Henne, M. Lang, R. Ruckdaschel, and S. Scharper, Development of vacuum plasma sprayed thin-film SOFC for reduced operating temperature, Fuel Cells Bulletin, vol.3, issue.21, pp.7-12, 2000.
DOI : 10.1016/S1464-2859(00)88860-4

A. S. Thorel, A. Chesnaud, M. Viviani, A. Barbucci, S. Presto et al., IDEAL-Cell, a High Temperature Innovative Dual mEmbrAne Fuel-Cell, ECS Transactions, 2010.
DOI : 10.1149/1.3205592

Q. Huang, R. Hui, B. Wang, and J. Zhang, A review of AC impedance modeling and validation in SOFC diagnosis, Electrochimica Acta, vol.52, issue.28, pp.8144-8164, 2007.
DOI : 10.1016/j.electacta.2007.05.071

K. D. Kreuer, E. Schonherr, and J. Maier, Proton and oxygen diffusion in baceo 3 -based compounds: a combined thermal gravimetric analysis and conductivity study, Solid State Ionics, pp.70-71278, 1994.

S. P. Badwal and K. Foger, Solid oxide electrolyte fuel cell review, Ceramics International, vol.22, issue.3, pp.257-265, 1996.
DOI : 10.1016/0272-8842(95)00101-8

H. Neef, International overview of hydrogen and fuel cell research???, Energy, vol.34, issue.3, pp.327-333, 2009.
DOI : 10.1016/j.energy.2008.08.014

A. B. Stambouli and E. Traversa, Solid oxide fuel cells (SOFCs): a review of an environmentally clean and efficient source of energy, Renewable and Sustainable Energy Reviews, vol.6, issue.5, pp.433-455, 2002.
DOI : 10.1016/S1364-0321(02)00014-X

J. M. Andujar and F. Segura, Fuel cells: History and updating. A walk along two centuries, Renewable and Sustainable Energy Reviews, vol.13, issue.9, pp.2309-2322, 2009.
DOI : 10.1016/j.rser.2009.03.015

A. Demin and P. Tsiakaras, Thermodynamic analysis of a hydrogen fed solid oxide fuel cell based on a proton conductor, International Journal of Hydrogen Energy, vol.26, issue.10, pp.1103-1108, 2001.
DOI : 10.1016/S0360-3199(01)00043-X

W. F. Smith, Principles of Materials Science and Engineering. mcGraw-Hill, 1990.

R. Moreno, The role of slip additives in tape-casting technology: part ii -binders and plasticizers. The American Ceramic Society Bulletin, pp.1647-1656, 1992.

R. Gerhard-anderson and A. S. Nowick, Ionic conductivity of CeO2 with trivalent dopants of different ionic radii, Solid State Ionics, vol.5, p.547, 1981.
DOI : 10.1016/0167-2738(81)90313-1

J. P. Huijsmans, Ceramics in solid oxide fuel cells, Current Opinion in Solid State and Materials Science, vol.5, issue.4, pp.317-323, 2001.
DOI : 10.1016/S1359-0286(00)00034-6

K. D. Kreuer, On the development of proton conducting materials for technological applications, Solid State Ionics, vol.97, issue.1-4, pp.1-15, 1997.
DOI : 10.1016/S0167-2738(97)00082-9