.. Magnesium-application-in-automotive-industries, 26 3.2 Magnesium application in aerospace industries 28 3.3 Magnesium application in ICT industries, Magnesium application in defence industries, p.30

S. Kaya, Improving the formability limits lightweight metal alloy Sheet using advanced processes -finite element modeling and experiment validation, 2008.

M. Kleiner, M. Geiger, and A. Klaus, Manufacturing of Lightweight Components by Metal Forming. CIRP Annals -Manufacturing Technology, pp.521-542, 2003.

Z. Yang, J. P. Li, J. X. Zhang, G. W. Lorimer, and J. Robson, Review on Research and Development of Magnesium Alloys, Acta Metallurgica Sinica (English Letters), vol.21, issue.5
DOI : 10.1016/S1006-7191(08)60054-X

R. Neugebauer, T. Altan, M. Geiger, M. Kleiner, and A. Sterzing, Sheet metal forming at elevated temperatures. CIRP Annals -Manufacturing Technology, pp.793-816, 2006.
DOI : 10.1016/j.cirp.2006.10.008

R. Gehrmann, M. M. Frommert, and G. Gottstein, Texture effects on plastic deformation of magnesium, Materials Science and Engineering: A, vol.395, issue.1-2, pp.338-349, 2005.
DOI : 10.1016/j.msea.2005.01.002

E. Doege, W. Sebastian, K. Droder, and G. Kurz, Increased Formability of Mg-Sheets using Temperature Controlled Deep Drawing Tools, Innovations in Processing and Manufacturing of Sheet Materials, TMS Annual Meeting, pp.53-60, 2001.

D. L. Yin, K. F. Zhang, G. F. Wang, and W. B. Han, Warm deformation behavior of hot-rolled AZ31 Mg alloy, Materials Science and Engineering: A, vol.392, issue.1-2, pp.320-325, 2005.
DOI : 10.1016/j.msea.2004.09.039

A. Turreta, A. Ghiotti, and S. Bruschi, Testing material formability in hot stamping operations. Proceeding of the IDDRG conference. Deep drawing research group, pp.99-105, 2006.

G. Pelosi, The finite-element method, Part I: R. L. Courant [Historical Corner], IEEE Antennas and Propagation Magazine, vol.49, issue.2, 2007.
DOI : 10.1109/MAP.2007.376627

H. Takuda, T. Yoshii, and N. Hatta, Finite-element analysis of the formability of a magnesium-based alloy AZ31 sheet, Journal of Materials Processing Technology, vol.89, issue.90, pp.89-90135, 1999.
DOI : 10.1016/S0924-0136(99)00039-4

H. Palaniswamy, G. Ngaile, and T. Altan, Finite element simulation of magnesium alloy sheet forming at elevated temperatures, Journal of Materials Processing Technology, vol.146, issue.1, pp.52-60, 2004.
DOI : 10.1016/S0924-0136(03)00844-6

P. J. Bolt, R. J. Werkhoven, and A. H. Van-de-boogaard, Effect of elevated temperature on the drawability of aluminum sheet components, Proceedings of the ESAFORM, pp.769-772, 2001.

R. W. Chan, C. X. Shi, and J. Ke, Structure and Properties of Nonferrous Alloys, 1999.

M. R. Barnett, Twinning and the ductility of magnesium alloys, Materials Science and Engineering: A, vol.464, issue.1-2, pp.1-7, 2007.
DOI : 10.1016/j.msea.2006.12.037

T. Al-samman and G. Gottstein, Dynamic recrystallization during high temperature deformation of magnesium, Materials Science and Engineering: A, vol.490, issue.1-2, pp.411-420, 2008.
DOI : 10.1016/j.msea.2008.02.004

K. Kaiser, D. Letzig, J. Bohlen, A. Styczynski, C. Hartig et al., Anisotropic Properties of Magnesium Sheet AZ31, Materials Science Forum, vol.419, issue.422, pp.419-422315, 2003.
DOI : 10.4028/www.scientific.net/MSF.419-422.315

X. Y. Lou, M. Li, R. K. Boger, S. R. Agnew, and R. H. Wagoner, Hardening evolution of AZ31B Mg sheet, International Journal of Plasticity, vol.23, issue.1, pp.44-86, 2007.
DOI : 10.1016/j.ijplas.2006.03.005

S. R. Agnew and O. Duygulu, Plastic anisotropy and the role of non-basal slip in magnesium alloy AZ31B, International Journal of Plasticity, vol.21, issue.6, pp.1161-1193, 2005.
DOI : 10.1016/j.ijplas.2004.05.018

A. Jager, P. Lukac, V. Gartnerova, J. Bohlen, and K. U. Kainer, Tensile properties of hot rolled AZ31 Mg alloy sheets at elevated temperatures, Journal of Alloys and Compounds, vol.378, issue.1-2, pp.184-187, 2004.
DOI : 10.1016/j.jallcom.2003.11.173

E. Doege and K. Droder, Sheet metal forming of magnesium wrought alloys ??? formability and process technology, Journal of Materials Processing Technology, vol.115, issue.1, pp.14-19, 2001.
DOI : 10.1016/S0924-0136(01)00760-9

T. Naka, T. Uemori, R. Hino, M. Kohzu, K. Higashi et al., Effects of strain rate, temperature and sheet thickness on yield locus of AZ31 magnesium alloy sheet, Journal of Materials Processing Technology, vol.201, issue.1-3, pp.395-400, 2008.
DOI : 10.1016/j.jmatprotec.2007.11.189

Y. Q. Cheng, H. Zhang, Z. H. Chen, and K. F. Xian, Flow stress equation of AZ31 magnesium alloy sheet during warm tensile deformation, Journal of Materials Processing Technology, vol.208, issue.1-3, pp.29-34, 2008.
DOI : 10.1016/j.jmatprotec.2007.12.095

H. Takuda, H. Fujimoto, and N. Hatta, Modelling on flow stress of Mg???Al???Zn alloys at elevated temperatures, Journal of Materials Processing Technology, vol.80, issue.81, pp.80-81513, 1998.
DOI : 10.1016/S0924-0136(98)00154-X

H. Takuda, T. Morishita, T. Kinoshita, and N. Shirakawa, Modelling of formula for flow stress of a magnesium alloy AZ31 sheet at elevated temperatures, Journal of Materials Processing Technology, vol.164, issue.165, pp.164-1651258, 2005.
DOI : 10.1016/j.jmatprotec.2005.02.034

Z. Q. Sheng and R. Shivpuri, Modeling flow stress of magnesium alloys at elevated temperature, Materials Science and Engineering: A, vol.419, issue.1-2, pp.202-208, 2006.
DOI : 10.1016/j.msea.2005.12.020

K. F. Zhang, D. L. Yin, and D. Z. Wu, Formability of AZ31 magnesium alloy sheets at warm working conditions, International Journal of Machine Tools and Manufacture, vol.46, issue.11, pp.461276-1280, 2006.
DOI : 10.1016/j.ijmachtools.2006.01.014

F. K. Chen and T. B. Huang, Formability of stamping magnesium-alloy AZ31 sheets, Journal of Materials Processing Technology, vol.142, issue.3, pp.643-647, 2003.
DOI : 10.1016/S0924-0136(03)00684-8

Y. S. Lee, Y. N. Kwon, S. H. Kang, S. W. Kim, and J. H. Lee, Forming limit of AZ31 alloy sheet and strain rate on warm sheet metal forming, Journal of Materials Processing Technology, vol.201, issue.1-3, pp.431-435, 2008.
DOI : 10.1016/j.jmatprotec.2007.11.306

L. Wang, L. C. Chan, and T. C. Lee, Formability Analysis of Magnesium Alloy Sheets at Elevated Temperatures With Experimental and Numerical Method, Journal of Manufacturing Science and Engineering, vol.130, issue.6, pp.1-7, 2008.
DOI : 10.1115/1.2977823

L. M. Ren, S. H. Zhang, G. Palumbo, D. Sorgente, and L. Tricarico, Numerical simulation on warm deep drawing of magnesium alloy AZ31 sheets, Materials Science and Engineering: A, vol.499, issue.1-2, pp.49940-49984, 2009.
DOI : 10.1016/j.msea.2007.11.132

T. B. Huang, Y. A. Tsai, and F. K. Chen, Finite element analysis and formability of non-isothermal deep drawing of AZ31B sheets, Journal of Materials Processing Technology, vol.177, issue.1-3, pp.142-145, 2006.
DOI : 10.1016/j.jmatprotec.2006.04.088

H. Watarai, Trend of research and development for magnesium alloys, Journal of Science & Technology Trends, vol.18, pp.84-97, 2006.

B. L. Mordike and F. Buch, Development of High Temperature Creep Resistant Alloys, Magnesium Alloys and their Applications, pp.35-40, 2000.
DOI : 10.1002/3527607552.ch6

C. Jaschik, H. Haferkamp, and M. Niemeyer, New Magnesium Wrought Alloys, Magnesium Alloys and their Applications, pp.41-46, 2000.
DOI : 10.1002/3527607552.ch7

B. Closset, Mechanical Properties of Extruded Magnesium Alloys, pp.274-279, 2000.
DOI : 10.1002/3527607552.ch43

K. J. Schemme, Magnesium Motorcycle Wheels For Racing Applications, Magnesium Alloys and their Applications, pp.391-396, 2000.
DOI : 10.1002/3527607552.ch62

H. W. Wagener and F. Lehnert, Deep Drawing of Magnesium Sheet Metal at Room Temperature, Magnesium Alloys and their Applications, pp.615-620, 2000.
DOI : 10.1002/3527607552.ch97

H. Furuya, S. Matunaga, and N. Kogizo, Requirements and Feasibility of Magnesium Alloys for Aerospace Applications, Materials Science Forum, vol.419, issue.422, pp.419-422261, 2003.
DOI : 10.4028/www.scientific.net/MSF.419-422.261

S. R. Agnew, Wrought magnesium: A 21st century outlook, JOM, vol.50, issue.61, 2004.
DOI : 10.1007/s11837-004-0120-8

F. Tsuneya, Magnesium alloy die casting technology for designing and manufacturing engineers

C. Ross, Mechanics of Solids, 1999.
DOI : 10.1533/9780857099716

J. Callister and D. William, Materials Science and Engineering -An Introduction

W. F. Hosford and R. , Metal Forming: Mechanics and Metallurgy, 2007.

J. Chakrabarty, Theory of Plasticity, Journal of Applied Mechanics, vol.55, issue.1, 2006.
DOI : 10.1115/1.3173655

J. Cao, H. Yao, A. Karafillis, and M. C. Boyce, Prediction of localized thinning in sheet metal using a general anisotropic yield criterion, International Journal of Plasticity, vol.16, issue.9, pp.1105-1129, 2000.
DOI : 10.1016/S0749-6419(99)00091-1

H. Tresca, Mémoire sur l'écoulement des corps solides soumis à de fortes pressions, C.R

. Ford, Advanced Mechanics of Materials, Longmans, 1963.

W. M. Huang and X. Y. Gao, Tresca and von Mises yield criteria: a view from strain space, Philosophical Magazine Letters, vol.1, issue.10, pp.10-625, 2004.
DOI : 10.1016/S0167-6636(02)00143-6

R. Hill, The Mathematical Theory of Plasticity, 1950.

W. A. Backofen, W. F. Hosford, and J. J. Burke, Texture hardening, pp.264-267, 1962.

W. F. Hosford, Comments on anisotropic yield criteria, International Journal of Mechanical Sciences, vol.27, issue.7-8, pp.423-427, 1985.
DOI : 10.1016/0020-7403(85)90032-3

F. Barlat, Crystallographic texture, anisotropic yield surfaces and forming limits of sheet metals, Materials Science and Engineering, vol.91, pp.55-72, 1987.
DOI : 10.1016/0025-5416(87)90283-7

A. Graf and W. F. Hosford, Calculations of forming limit diagrams, Metallurgical Transactions A, vol.99, issue.3, pp.87-96, 1990.
DOI : 10.1007/BF02656427

F. Barlat and J. Lian, Plastic behavior and stretchability of sheet metals. Part I: A yield function for orthotropic sheets under plane stress conditions, International Journal of Plasticity, vol.5, issue.1, pp.51-66, 1989.
DOI : 10.1016/0749-6419(89)90019-3

F. Barlat, D. J. Lege, and J. C. Brem, A six-component yield function for anisotropic materials, International Journal of Plasticity, vol.7, issue.7, pp.693-712, 1991.
DOI : 10.1016/0749-6419(91)90052-Z

F. Barlat and R. C. Becker, Yielding description for solution strengthened aluminum alloys, International Journal of Plasticity, vol.13, issue.4, pp.385-401, 1997.
DOI : 10.1016/S0749-6419(97)80005-8

F. Barlat, Y. Maeda, and K. Chung, Yield function development for aluminum alloy sheets, Journal of the Mechanics and Physics of Solids, vol.45, issue.11-12, pp.1727-1763, 1997.
DOI : 10.1016/S0022-5096(97)00034-3

F. Barlat and J. C. Brem, Plane stress yield function for aluminum alloy sheets???part 1: theory, International Journal of Plasticity, vol.19, issue.9, pp.1297-1319, 2003.
DOI : 10.1016/S0749-6419(02)00019-0

F. Barlat, H. Aretz, and J. W. Yoon, Linear transfomation-based anisotropic yield functions, International Journal of Plasticity, vol.21, issue.5, pp.1009-1039, 2005.
DOI : 10.1016/j.ijplas.2004.06.004

J. W. Yoon, F. Barlat, and J. J. Gracio, Anisotropic strain hardening behavior in simple shear for cube textured aluminum alloy sheets, International Journal of Plasticity, vol.21, issue.12, pp.2426-2447, 2005.
DOI : 10.1016/j.ijplas.2005.03.014
URL : https://hal.archives-ouvertes.fr/hal-00141490

W. Lewin, Hook's Law, Simple Harmonic Oscillator, MIT open Course 8.01: Classical Mechanics, Lecture 10, 1999.

J. Lubliner, Plasticity Theory, Journal of Applied Mechanics, vol.59, issue.1, 1990.
DOI : 10.1115/1.2899459

S. P. Timoshenko, History of strength of materials, 1953.

L. M. Kachanov, Fundamentals of the Theory of Plasticity

A. S. Khan and S. Huang, Continuum Theory of Plasticity, 1995.

J. Vernon, Introduction to Engineering Materials, 3rd ED, 1992.

J. Chakrabarty, Theory of Plasticity, Journal of Applied Mechanics, vol.55, issue.1, 2006.
DOI : 10.1115/1.3173655

A. Nadai, Theory of Flow and Fracture of Solids, 1963.

V. S. Lensky and E. V. Lensky, Constitutive equations and physical reliability in the modern theory of plasticity, International Journal of Engineering Science, vol.32, issue.5, pp.5-743, 1994.
DOI : 10.1016/0020-7225(94)90057-4

E. Onate, S. Oller, J. Oliver, and J. Lubliner, A constitutive model for cracking of concrete based on the incremental theory of plasticity, Engineering Computations, vol.5, pp.4-309, 1988.

J. D. Anderson, A history of Aerodynamics, 1997.
DOI : 10.1017/CBO9780511607158

S. Chirita, SAINT-VENANT'S PRINCIPLE IN LINEAR THERMOELASTICITY, Journal of Thermal Stresses, vol.38, issue.5, p.485, 1995.
DOI : 10.1080/01495739508946316

D. Banabic and E. Dannenmann, Prediction of the influence of yield locus on the limit strains in sheet metals, Journal of Materials Processing Technology, vol.109, issue.1-2, pp.1-2, 2001.
DOI : 10.1016/S0924-0136(00)00770-6

C. Miehe, On the representation of Prandtl-Reuss tensors within the framework of multiplicative elastoplasticity, International Journal of Plasticity, vol.10, issue.6, pp.609-621, 1994.
DOI : 10.1016/0749-6419(94)90025-6

F. Nichols, Plastic instabilities and uniaxial tensile ductilities, Acta Metallurgica, vol.28, issue.6, pp.6-663, 1980.
DOI : 10.1016/0001-6160(80)90144-3

R. P. Skelton, H. J. Maier, and H. J. Christ, The Bauschinger effect, Masing model and the Ramberg???Osgood relation for cyclic deformation in metals, Materials Science and Engineering: A, vol.238, issue.2, pp.377-390, 1997.
DOI : 10.1016/S0921-5093(97)00465-6

H. J. Kleemola and M. A. Nieminen, On the strain-hardening parameters of metals, Metallurgical Transactions, vol.3, issue.8, pp.8-1863, 1974.
DOI : 10.1007/BF02644152

S. P. Keeler, Determination of Forming Limits in Automotive Stampings, SAE Technical Paper Series, 1965.
DOI : 10.4271/650535

S. S. Hecker, Formability of Aluminum Alloy Sheets, Journal of Engineering Materials and Technology, vol.97, issue.1, pp.66-73, 1975.
DOI : 10.1115/1.3443263

S. S. Hecker, Simple Technique for Determining Forming Limit Curves, Sheet Metal Industries, pp.671-676, 1975.

S. S. Hecker, Experimental Studies of Yield Phenomena in Biaxially Loaded Metals, Constitutive Equations in Viscoplasticity: Computational and Engineering Aspects

A. B. Da-rocha and J. M. Jalinier, Plastic instability of sheet metals under simple and complex strain paths., Transactions of the Iron and Steel Institute of Japan, vol.24, issue.2, pp.132-140, 1984.
DOI : 10.2355/isijinternational1966.24.132

A. Barata-da-rocha, F. Barlat, and J. M. Jalinier, Prediction of the forming limit diagrams of anisotropic sheets in linear and non-linear loading, Materials Science and Engineering, vol.68, issue.2, pp.151-164, 1985.
DOI : 10.1016/0025-5416(85)90404-5

H. W. Swift, Plastic instability under plane stress, Journal of the Mechanics and Physics of Solids, vol.1, issue.1, pp.1-18, 1952.
DOI : 10.1016/0022-5096(52)90002-1

R. Hill, On discontinuous plastic states, with special reference to localized necking in thin sheets, Journal of the Mechanics and Physics of Solids, vol.1, issue.1, pp.19-30, 1952.
DOI : 10.1016/0022-5096(52)90003-3

R. Hill, Theoretical plasticity of textured aggregates, Mathematical Proceedings of the Cambridge Philosophical Society, vol.236, issue.01, pp.179-191, 1979.
DOI : 10.1016/0020-7403(66)90069-5

W. F. Hosford and R. , Metal Forming: Mechanics and Metallurgy, 2007.

Z. Marciniak and K. Kuczynski, Limit strains in the processes of stretch-forming sheet metal, International Journal of Mechanical Sciences, vol.9, issue.9, pp.609-620, 1967.
DOI : 10.1016/0020-7403(67)90066-5

Z. Marciniak, K. Kuczynski, and T. Pokra, Influence of the plastic properties of a material on the forming limit diagram for sheet metal in tension, International Journal of Mechanical Sciences, vol.15, issue.10, pp.789-805, 1973.
DOI : 10.1016/0020-7403(73)90068-4

P. Hora, A prediction method for ductile sheet metal failure using FE-simulation, pp.252-256, 1996.

Z. Marciniak, J. L. Duncan, and J. Hu, Mechanics of sheet metal forming, 2002.

W. M. Lai, D. Rubin, and E. , Introduction to Continuum Mechanics, 2009.

R. Knockaert, Etude expérimentale et numérique de la localisation de la deformation lors de la mise en forme de produits minces, 2001.

W. F. Hosford and R. , Metal Forming: Mechanics and Metallurgy, 2007.

Z. Gronostajski, The constitutive equations for FEM analysis, Journal of Materials Processing Technology, vol.106, issue.1-3, pp.40-44, 2000.
DOI : 10.1016/S0924-0136(00)00635-X

A. Gavrus, E. Massoni, and J. L. Chenot, An inverse analysis using a finite element model for identification of rheological parameters, Journal of Materials Processing Technology, vol.60, issue.1-4, pp.60447-454, 1996.
DOI : 10.1016/0924-0136(96)02369-2

Z. Marciniak, J. L. Duncan, and J. Hu, Mechanics of sheet metal forming, 2002.

D. T. Llewellyn and R. C. Hudd, Steels: metallurgy and applications, 1998.

R. Neugebauer, T. Altan, M. Geiger, M. Kleiner, and A. Sterzing, Sheet metal forming at elevated temperatures, CIRP Annals - Manufacturing Technology, vol.55, issue.2, pp.793-816, 2006.
DOI : 10.1016/j.cirp.2006.10.008

P. Hora, T. Longchang, and J. A. Reissner, Prediction Method for ductile sheet metal failure in FE-simulation, pp.252-256, 1996.

J. Wilsius, P. Hein, and R. Kefferstein, Status and Future Trends of Hot Stamping of USIBOR 1500 P, Tagungsband zum 1. Erlanger Workshop Warmblechumformung, pp.83-101, 2006.

A. Turetta, S. Bruschi, and A. Ghiotti, Investigation of 22MnB5 formability in hot stamping operations, Journal of Materials Processing Technology, vol.177, issue.1-3, pp.396-400, 2006.
DOI : 10.1016/j.jmatprotec.2006.04.041

T. Asai and J. Iwaya, Hot stamping drawability of steel. International Deep Drawing Research Group, Forming the Future: Global Trends in Sheet Metal Forming, pp.344-354, 2004.

E. Lopez-chipres, I. Mejia, C. Maldonado, A. Bedolla-jacuinde, and J. M. Cabrera, Hot ductility behaviour of boron micoalloyed steels, Materials Science and Engineering A, vol.460, pp.461464-470, 2007.

K. Nakazima, T. Kiduma, and K. Hasuka, Study on the formability of steel sheets, Yamata Technical Report, vol.264, pp.141-154, 1968.

Z. Marciniak, K. Kuczynski, and T. Pokora, Influence of the plastic properties of a material on the forming limit diagram for sheet metal in tension, International Journal of Mechanical Sciences, vol.15, issue.10, pp.789-805, 1973.
DOI : 10.1016/0020-7403(73)90068-4

H. Conrad, The role of deformation kinetics in the stretch formability of sheet metals, Journal of Mechanical Working Technology, vol.7, issue.2, pp.121-145, 1982.
DOI : 10.1016/0378-3804(82)90050-X

N. En-iso-12004, Metallic materials: Sheet and strip -Determination of forming-limit curves, 2008.

F. Ozturk and D. Lee, Analysis of forming limits using ductile fracture criteria, Journal of Materials Processing Technology, vol.147, issue.3, pp.397-404, 2004.
DOI : 10.1016/j.jmatprotec.2004.01.014

R. Knockaert, Etude expérimentale et numérique de la localisation de la deformation lors de la mise en forme de produits minces, 2001.

Y. Dahan, Warm formability of quenchable steel sheets, 2008.

F. K. Chen and T. B. Huang, Formability of stamping magnesium-alloy AZ31 sheets, Journal of Materials Processing Technology, vol.142, issue.3, pp.643-647, 2003.
DOI : 10.1016/S0924-0136(03)00684-8

A. Graf and W. F. Hosford, Calculations of forming limit diagrams, Metallurgical Transactions A, vol.99, issue.3, pp.21-87, 1990.
DOI : 10.1007/BF02656427

A. Thickness-distribution and A. , 138 3.3 Comparison of simulation result in FORGE

S. Kobayashi and T. Altan, Metal forming and the finite-element method, Journal of Materials Shaping Technology, vol.8, issue.1, 1989.
DOI : 10.1007/BF02834794

A. H. Van-den-boogaard, P. J. Bolt, and R. J. Werkhoven, Aluminum sheet forming at elevated temperatures, Simulation of Materials Processing: Theory, Method and Applications, pp.819-824, 2001.

G. Pelosi, The finite-element method, Part I: R. L. Courant: Historical Corner. Antennas and Propagation Magazine, 2007.

S. S. Rao, The Finite Element Method in Engineering, Journal of Applied Mechanics, vol.50, issue.4a, 2005.
DOI : 10.1115/1.3167179

K. J. Bathe, Finite Element Method, 2007.
DOI : 10.1002/9780470050118.ecse159
URL : https://hal.archives-ouvertes.fr/hal-01403646

T. J. Hughes, The Finite Element Method: Linear Static and Dynamic Finite Element Analysis, 1987.

O. C. Zienkiewicz and R. L. Taylor, The finite element method for solid and structural mechanics, 2005.

B. S. Thomas, A general forming limit criterion for sheet metal forming, International Journal of Mechanical Sciences, vol.42, issue.1, pp.1-27, 2000.

I. Babuska, The finite element method with Lagrangian multipliers, Numerische Mathematik, vol.12, issue.3, pp.179-192, 1973.
DOI : 10.1007/BF01436561

I. Babuska and A. K. Aziz, Lectures on mathematical foundations of the finite element method, 2008.

N. Sukumar, N. Moës, B. Moran, and T. Belytschko, Extended finite element method for three-dimensional crack modelling, International Journal for Numerical Methods in Engineering, vol.15, issue.11, pp.1549-1570, 2000.
DOI : 10.1002/1097-0207(20000820)48:11<1549::AID-NME955>3.0.CO;2-A
URL : https://hal.archives-ouvertes.fr/hal-01006859

M. A. Crisfield, Nonlinear finite element analysis of solids and structures, 2008.

J. M. Duncan, State of the Art: Limit Equilibrium and Finite-Element Analysis of Slopes, Journal of Geotechnical Engineering, vol.122, issue.7, pp.577-596, 1996.
DOI : 10.1061/(ASCE)0733-9410(1996)122:7(577)

R. Knockaert, Numerical and experimental study of the strain localization during sheet forming operations, 2001.

K. Droder, Analysis on forming of thin magnesium sheets, Ph.D.Dissertation, IFUM, 1999.

S. L. Semiatin, E. W. Collings, V. E. Wood, and T. Altan, Determination of the interface heat transfer coefficient for non-isothermal bulk forming process, Journal of Industrial Engineering, vol.109, pp.49-57, 1987.

S. H. Kim, H. W. Lee, and S. Choi, Experimental and analytical studies on mechanical properties and formability of AZ31B magnesium alloy sheet, Proceedings of the ESAFORM, pp.149-154, 2008.

J. Lemaitre, R. Desmorat, and M. Sauzay, Anisotropic damage law of evolution, European Journal of Mechanics - A/Solids, vol.19, issue.2, pp.187-208, 2000.
DOI : 10.1016/S0997-7538(00)00161-3

H. Takuda, K. Mori, and N. Hatta, The application of some criteria for ductile fracture to the prediction of the forming limit of sheet metals, Journal of Materials Processing Technology, vol.95, issue.1-3, pp.95116-121, 1999.
DOI : 10.1016/S0924-0136(99)00275-7

J. Lemaitre and J. P. Sermage, One damage law for different mechanisms, Computational Mechanics, vol.20, issue.1-2, pp.84-88, 1997.
DOI : 10.1007/s004660050221

J. Lemaitre, J. P. Sermage, and R. Desmorat, A two scale damage concept applied to fatigue, International Journal of Fracture, vol.97, issue.1/4, pp.67-81, 1999.
DOI : 10.1023/A:1018641414428

Z. G. Liu, E. Massoni, and P. Lasne, Benchmark 2: Simulation of the Cross-shaped Cup Deep-drawing Process. The 8th Internatinal Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, 2011.