R. K. Pachauri and R. A. , Bilan 2007 des changements climatiques. Contribution des Groupes de travail I, II et III au quatrième Rapport d'évaluation du Groupe d'experts intergouvernemental sur l'évolution du climat, 2007.

J. L. Aider, Appel à projets ANR CARAVAJE II, 2009.

J. Katz, Race Car Aerodynamics: Designing for Speed, 1996.

G. Buresti, Bluff-Body aerodynamics International Advanced School on Windexcited and Aeroelastic Vibrations of Structures, 2000.

J. Délery, Effet de la viscosité et couche limite, 2007.

R. P. Hoxey, A. M. Reynolds, G. M. Richardson, A. P. Roberston, and J. L. Short, Observations of Reynolds number sensitivity in the separated flow region on a bluff body, Journal of Wind Engineering and Industrial Aerodynamics, vol.73, issue.3, pp.73-231, 1998.
DOI : 10.1016/S0167-6105(97)00287-0

A. Darabi and I. Wygnanski, Active management of naturally separated flow over a solid surface. Part 1. The forced reattachment process, Journal of Fluid Mechanics, vol.510, pp.105-129, 2004.
DOI : 10.1017/S0022112004009231

A. Darabi and I. Wygnanski, Active management of naturally separated flow over a solid surface. Part 2. The separation process, Journal of Fluid Mechanics, vol.510, pp.131-144, 2004.
DOI : 10.1017/S0022112004009243

L. Prandtl, Fluid motion with very small friction, 3rd International Mathematics Congress, pp.484-491, 1904.

P. W. Bearman, Vortex Shedding from Oscillating Bluff Bodies, Annual Review of Fluid Mechanics, vol.16, issue.1, pp.195-222, 1984.
DOI : 10.1146/annurev.fl.16.010184.001211

J. Aider and A. Danet, Large-eddy simulation study of upstream boundary conditions influence upon a backward-facing step flow, Comptes Rendus M??canique, vol.334, issue.7, pp.447-453, 2006.
DOI : 10.1016/j.crme.2006.05.004

J. Aider, A. Danet, and M. Lesieur, Large-eddy simulation applied to study the influence of upstream conditions on the time-dependant and averaged characteristics of a backward-facing step flow, Journal of Turbulence, vol.8, p.51, 2007.
DOI : 10.1016/S0142-727X(00)00057-6
URL : https://hal.archives-ouvertes.fr/hal-00173190

C. D. Winant and B. F. , Vortex pairing : the mechanism of turbulent mixing-layer growth at moderate Reynolds number, Journal of Fluid Mechanics, vol.48, issue.02, pp.237-255, 1974.
DOI : 10.1146/annurev.fl.03.010171.002023

A. Dejoan and L. M. , Large eddy simulation of periodically perturbed separated flow over a backward-facing step, International Journal of Heat and Fluid Flow, vol.25, issue.4, pp.581-592, 2004.
DOI : 10.1016/j.ijheatfluidflow.2004.03.004

J. Tihon, V. P?nkavová, and M. Pantzali, The effect of inlet pulsations on the backward-facing step flow, European Journal of Mechanics - B/Fluids, vol.29, issue.3, pp.224-235, 2010.
DOI : 10.1016/j.euromechflu.2010.02.001

M. Onorato, A. F. Costelli, and A. Garrone, Drag Measurement Through Wake Analysis, SAE Technical Paper Series, p.840302, 1984.
DOI : 10.4271/840302

P. Ardonceau and G. Amani, Remarks on the relation between lift induced drag and vortex drag, European journal of mechanics. B, Fluids, vol.11, issue.4, pp.455-460, 1992.

J. Beaudoin, Contrôle actif d'écoulement en aérodynamique automobile, 2004.

J. Aider, J. Beaudoin, and W. , Drag and lift reduction of a 3D bluff-body using active vortex generators, Experiments in Fluids, vol.20, issue.5, pp.771-789, 2009.
DOI : 10.1007/s00348-009-0770-y

W. H. Hucho, Aerodynamics of Road Vehicles, Annual Review of Fluid Mechanics, vol.25, issue.1, 1998.
DOI : 10.1146/annurev.fl.25.010193.002413

K. Cooper, Bluff-body aerodynamics as applied to vehicles, Journal of Wind Engineering and Industrial Aerodynamics, vol.49, issue.1-3, pp.1-21, 1993.
DOI : 10.1016/0167-6105(93)90003-7

P. W. Bearman, Near wake flows behind two- and three-dimensional bluff bodies, Journal of Wind Engineering and Industrial Aerodynamics, vol.69, issue.71, pp.69-71, 1997.
DOI : 10.1016/S0167-6105(97)00146-3

R. H. Barnard, Road Vehicle Aerodynamic Design: An Introduction, 1996.

G. M. Good and . Le, On the use of reference models in automotive aerodynamics, pp.2004-2005, 2004.

T. Morel, The effect of base slant angle on the flow pattern and drag of threedimensional bodies with blunt ends Symposium on Aerodynamic Drag Mechanisms of Bluff Bodies and Road Vehicles, pp.191-226, 1978.

F. Chometon, A. Strzelecki, V. Ferrand, H. Dechipre, P. C. Dufour et al., Experimental Study of Unsteady Wakes Behind an Oscillating Car Model, SAE Technical Paper Series, pp.665-673, 2005.
DOI : 10.4271/2005-01-0604
URL : https://hal.archives-ouvertes.fr/hal-01156192

J. Aider, L. Dubuc, G. Hulin, and E. L. , Experimental and numerical investigation of the flow over a simplified vehicle shape, Proceedings of the 3rd MIRA international vehicle aerodynamics conference, 2000.

G. W. Carr and S. W. , Blockage Effects in Automotive Wind-Tunnel Testing, SAE Technical Paper Series, 1986.
DOI : 10.4271/860093

S. Ahmed, G. Ramm, and G. Faltin, Some Salient Features Of The Time-Averaged Ground Vehicle Wake, SAE Technical Paper Series, p.840300, 1984.
DOI : 10.4271/840300

A. Spohn and P. Gilliéron, Flow separations generated by a simplified geometry of an automotive vehicle, IUTAM Symposium: unsteady separated flows, 2002.

M. Minguez, R. Pasquetti, and E. Serre, High-order large-eddy simulation of flow over the ???Ahmed body??? car model, Physics of Fluids, vol.20, issue.9, p.95101, 2008.
DOI : 10.1063/1.2952595

S. Krajnovi? and D. L. , Flow Around a Simplified Car, Part 1: Large Eddy Simulation, Journal of Fluids Engineering, vol.127, issue.5, pp.907-918, 2005.
DOI : 10.1115/1.1989371

S. Krajnovi? and D. L. , Flow Around a Simplified Car, Part 2: Understanding the Flow, Journal of Fluids Engineering, vol.127, issue.5, pp.919-928, 2005.
DOI : 10.1115/1.1989372

D. Hondt, M. Gilliéron, P. Devinant, and P. , Flow in the engine compartment: analysis and optimisation, International Journal of Aerodynamics, vol.1, issue.3/4, pp.384-403, 2011.
DOI : 10.1504/IJAD.2011.038852
URL : https://hal.archives-ouvertes.fr/hal-00908087

P. Gilliéron, Analyse, modélisation et typologie des écoulements de culot dans l'automobile, 2000.

H. Lienhart and S. Becker, Flow and Turbulence Structure in the Wake of a Simplified Car Model, SAE Technical Paper Series, 2003.
DOI : 10.4271/2003-01-0656

E. Guilmineau, Computational study of flow around a simplified car body, Journal of Wind Engineering and Industrial Aerodynamics, vol.96, issue.6-7, pp.1207-1217, 2008.
DOI : 10.1016/j.jweia.2007.06.041
URL : https://hal.archives-ouvertes.fr/hal-01156027

G. Vino, S. Watkins, P. Mousley, J. Watmuff, and P. S. , Flow structures in the near-wake of the Ahmed model, Journal of Fluids and Structures, vol.20, issue.5, pp.673-695, 2005.
DOI : 10.1016/j.jfluidstructs.2005.03.006

C. Leclerc, Réduction de la trainée d'un véhicule automobile simplifié à l'aide du contrôle actif par jet synthétique, Thèse de l'Institut National Polytechnique de Toulouse, 2008.

A. Thacker, Contribution expérimetale à l'analyse stationnaire et instationnaire de l'écoulemet à l'arrière d'un corps de faible allongement, 2010.

M. Roume, P. Gillie-ron, and A. Kourta, Separated Flows Around the Rear Window of a Simplified Car Geometry, Journal of Fluids Engineering, vol.130, issue.2, p.21101, 2008.
DOI : 10.1115/1.2829566

M. Roume, Contribution à l'analyse et au contrôle des sillages de corps épais par aspiration ou soufflage continu, Thèse de l'Institut National Polytechnique de Toulouse, 2006.

B. Lehugeur, Caractérisation et contrôle des structures tourbillonnaires longitudinales en aérodynamique automobile, Thèse de l, 2007.

P. Gilliéron, A. Leroy, S. Aubrun, and P. Audier, Influence of the Slant Angle of 3D Bluff Bodies on Longitudinal Vortex Formation, Journal of Fluids Engineering, vol.132, issue.5, p.51104, 2010.
DOI : 10.1115/1.4001450

B. Lehugeur, P. Gilliéron, T. , and L. , Characterization of Longitudinal Vortices in the Wake of a Simplified Car Model, 23rd AIAA Applied Aerodynamics Conference, 2005.
DOI : 10.2514/6.2005-5383

A. Thacker, A. Leroy, S. Aubrun, S. Loyer, and P. Devinant, Caractéristiques du sillage du corps de Ahmed : effet de la suppression du décollement de lunette arrière, pp.87-99, 2009.

H. Lienhart, C. Stoots, and S. Becker, Flow and Turbulence Structure in the Wake of a Simplified Car Model, SAE Technical Paper Series, 2000.
DOI : 10.4271/2003-01-0656

R. K. Strachan, K. Knowles, and L. N. , The vortex structure behind an Ahmed reference model in the presence of a moving ground plane, Experiments in Fluids, vol.121, issue.5, pp.659-669, 2007.
DOI : 10.1007/s00348-007-0270-x

E. Fares, Unsteady flow simulation of the Ahmed reference body using a lattice Boltzmann approach, Computers & Fluids, vol.35, issue.8-9, pp.940-950, 2006.
DOI : 10.1016/j.compfluid.2005.04.011

J. Beaudoin, O. Cadot, J. Aider, K. Gosse, P. Paranthoën et al., Cavitation as a complementary tool for automotive aerodynamics, Experiments in Fluids, vol.40, issue.5, pp.763-768, 2004.
DOI : 10.1007/s00348-004-0879-y

S. Kapadia, S. Roy, and K. Wurtzler, Detached-eddy simulation over a reference Ahmed car model, 41st Aerospaces Sciences Meeting ad Exhibit, 2003.

B. Conan, J. Anthoine, and P. Planquart, Experimental aerodynamic study of a car-type bluff body, Experiments in Fluids, vol.18, issue.1, pp.1273-1284, 2010.
DOI : 10.1007/s00348-010-0992-z
URL : https://hal.archives-ouvertes.fr/hal-01319500

C. Hinterberger, M. García-villalba, and R. W. , Large eddy simulation of flow around the Ahmed body Lecture Notes in Applied and Computational Mechanics / The Aerodynamics of Heavy Vehicles: Trucks, pp.77-89, 2003.

V. Boucinha, R. Weber, and A. Kourta, Drag reduction of a 3D bluff body using plasma actuators, International Journal of Aerodynamics, vol.1, issue.3/4, pp.262-281, 2011.
DOI : 10.1504/IJAD.2011.038845
URL : https://hal.archives-ouvertes.fr/hal-00616933

A. Roshko, Perspectives on bluff body aerodynamics, Journal of Wind Engineering and Industrial Aerodynamics, vol.49, issue.1-3, pp.79-100, 1993.
DOI : 10.1016/0167-6105(93)90007-B

J. Flatt, The History of Boundary Layer Control Research in the United States of America Boundary Layer and Flow Control, pp.122-143, 1961.

F. Chometon, P. Gilliéron, and L. J. , Aerodynamics of Nasal Airways with Application to Obstruction, pp.1-6, 2000.

F. W. Meredith, Cooling of Aircraft Engines with Special Reference to Ethylene Glycol Radiators Enclosed in Ducts, Aeronautical Research Committee Reports and Memoranda n°1683, 1935.

M. Gad-el-hak, Flow Control: Passive, Active, and Reactive Flow Management, 2000.
DOI : 10.1017/CBO9780511529535

J. D. Coon and K. D. Visser, Drag Reduction of a Tractor-Trailer Using Planar Boat Tail Plates The Aerodynamics of Heavy Vehicles: Trucks, Buses, and Trains, pp.249-265, 2004.

P. Gilliéron and A. Kourta, Aerodynamic drag reduction by vertical splitter plates, Experiments in Fluids, vol.16, issue.4, pp.1-16, 2009.
DOI : 10.1007/s00348-009-0705-7

S. F. Hoerner, Fluid-Dynamic Lift: Practical Information on Aerodynamic and Hydrodynamic Lift, Hoerner Fluid Dynamics, 1992.

A. Kourta and P. Gilliéron, Impact of the Automotive Aerodynamic Control on the Economic Issues, Journal of Applied Fluid Mechanics, vol.2, issue.2, pp.69-75, 2009.

J. Aider, J. Lasserre, J. Beaudoin, V. Herbert, and W. , Contrôle d'écoulement en Aérodynamique automobile, 19ème Congrès Français de Mécanique, pp.1-6, 2009.

M. Koike, T. Nagayoshi, and N. Hamamoto, Research on aerodynamic drag reduction by vortex generators, Mitsubishi Motors Technical Review, vol.16, pp.11-16, 2004.

C. Bruneau, P. Gilliéron, and I. Mortazavi, Flow manipulation around the Ahmed body with a rear window using passive strategies, Comptes Rendus M??canique, vol.335, issue.4, pp.213-218, 2007.
DOI : 10.1016/j.crme.2007.03.003
URL : https://hal.archives-ouvertes.fr/inria-00346891

C. Bruneau and I. Mortazavi, Passive control of the flow around a square cylinder using porous media, International Journal for Numerical Methods in Fluids, vol.46, issue.4, pp.415-433, 2004.
DOI : 10.1002/fld.756

M. Falchi, G. Provenzano, D. Pietrogiacomi, and G. P. Romano, Experimental and numerical investigation of flow control on bluff bodies by passive ventilation, Experiments in Fluids, vol.29, issue.1, pp.21-33, 2006.
DOI : 10.1007/s00348-006-0141-x

F. Cannizzo, L'évolution de l'aérodynamique Ferrari sur ces 20 dernières années, pp.1-11, 2008.

J. F. Beaudoin, O. Cadot, J. L. Aider, and W. J. , Bluff-body drag reduction by extremum-seeking control, Journal of Fluids and Structures, vol.22, issue.6-7, pp.6-7, 2006.
DOI : 10.1016/j.jfluidstructs.2006.04.010
URL : https://hal.archives-ouvertes.fr/hal-00173169

V. J. Modi, B. Ying, and Y. T. , Boundary-Layer Control of Bluff Bodies Through Momentum Injection, SAE Technical Paper Series, p.902225, 1990.
DOI : 10.4271/902225

V. Modi, MOVING SURFACE BOUNDARY-LAYER CONTROL: A REVIEW, Journal of Fluids and Structures, vol.11, issue.6, pp.627-663, 1997.
DOI : 10.1006/jfls.1997.0098

J. Jolibois, M. Forte, E. Moreau, M. , G. M. Gladwell et al., Separation Control along a NACA 0015 Airfoil Using a Dielectric Barrier Discharge Actuator, IUTAM Symposium on Flow Control, pp.175-181, 2008.
DOI : 10.1007/978-1-4020-6858-4_20
URL : https://hal.archives-ouvertes.fr/hal-00146866

D. Greenblatt, The control of flow separation by periodic excitation, Progress in Aerospace Sciences, pp.487-545, 2000.
DOI : 10.1016/S0376-0421(00)00008-7

S. Aubrun, J. Mcnally, F. Alvi, and A. Kourta, Separation flow control on a generic ground vehicle using steady microjet arrays, Experiments in Fluids DOI: 10.1007, pp.348-359, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00654733

L. Gimeno, A. Talbi, R. Viard, V. Preobrazhensky, A. Merlen et al., Microjets synthétiques MMMS pour les contrôles d 'écoulements aérodynamiques, pp.149-156, 2009.

W. Ghozlani, L. Baldas, R. Caen, and A. Kourta, Etude numérique et expérimentale des actionneurs micro-fluidiques pour le contrôle actif des écoulements, p.2502, 2009.

P. Pernod, A. Merlen, A. Talbi, V. Preobrazhensky, R. Viard et al., IEMN/LEMAC magneto-mechanical microjets and micro-hotwires and aerodynamic active flow control, International Journal of Aerodynamics, vol.1, issue.3/4, pp.243-261, 2011.
DOI : 10.1504/IJAD.2011.038844
URL : https://hal.archives-ouvertes.fr/hal-00591322

F. Harambat, J. Lasserre, J. Beaudoin, C. Edouard, and A. J. , Characterization of the flow induced by high amplitude clearance pulsed micro-jets, European Drag Reduction and Flow Control Meeting, 2006.

K. R. Mcmanus, H. H. Legner, and D. S. , Pulsed vortex generator jets for active control of flow separation, Fluid Dynamics Conference, 1994.
DOI : 10.2514/6.1994-2218

I. Wygnanski, Boundary layer and flow control by periodic addition of momentum, 4th Shear Flow Control Conference, pp.1-21, 1997.
DOI : 10.2514/6.1997-2117

A. Brunn and N. W. , Separation control by periodic excitation in a turbulent axisymmetric diffuser flow, Journal of Turbulence, vol.4, pp.1-13, 2003.
DOI : 10.1088/1468-5248/4/1/009

A. Brunn and N. W. , Active control of turbulent separated flows over slanted surfaces, International Journal of Heat and Fluid Flow, vol.27, issue.5, pp.748-755, 2006.
DOI : 10.1016/j.ijheatfluidflow.2006.03.006

L. W. Sigurdson, The structure and control of a turbulent reattaching flow, Journal of Fluid Mechanics, vol.48, issue.-1, pp.139-165, 1995.
DOI : 10.1016/0167-6105(81)90007-6

M. Kiya, M. Shimizu, and O. Mochizuki, Sinusoidal forcing of a turbulent separation bubble, Journal of Fluid Mechanics, vol.342, pp.119-139, 1997.
DOI : 10.1017/S0022112097005521

K. B. Chun and S. H. , Control of turbulent separated flow over a backwardfacing step by local forcing, Experiments in Fluids, vol.21, issue.6, pp.417-426, 1996.

C. M. Ho and P. Huerre, Perturbed Free Shear Layers, Annual Review of Fluid Mechanics, vol.16, issue.1, pp.365-422, 1984.
DOI : 10.1146/annurev.fl.16.010184.002053

S. Yoshioka, S. Obi, and M. S. , Organized vortex motion in periodically perturbed turbulent separated flow over a backward-facing step, International Journal of Heat and Fluid Flow, vol.22, issue.3, pp.301-307, 2001.
DOI : 10.1016/S0142-727X(01)00092-3

S. Yoshioka, S. Obi, and M. S. , Momentum transfer in the periodically perturbed turbulent separated flow over the backward-facing step, Proceedings of the First International Symposium on Turbulence and Shear Flow Phenomena TSFP-1, pp.1321-1326, 1999.

K. B. Chun and S. H. , Visualization of a locally-forced separated flow over a backward-facing step, Experiments in Fluids, vol.25, issue.2, pp.133-142, 1998.
DOI : 10.1007/s003480050217

T. Duriez, J. Aider, J. E. Wesfreid, and G. Artana, Control of a massively separated flow through vortex pairing and phase locking, International Journal of Heat and Fluid Flow, pp.1-4, 2011.

S. Krajnovi? and J. Fernandes, Numerical simulation of the flow around a simplified vehicle model with active flow control, International Journal of Heat and Fluid Flow, vol.32, issue.1, pp.192-200, 2011.
DOI : 10.1016/j.ijheatfluidflow.2010.06.007

L. Henning, M. Pastoor, R. King, B. Noack, and G. Tadmor, Feedback Control Applied to the Bluff Body Wake, Active Flow Control, pp.369-390, 2007.
DOI : 10.1007/978-3-540-71439-2_23

G. Fourrié, L. Keirsbulck, L. Labraga, and P. Gilliéron, Bluff-body drag reduction using a deflector, Experiments in Fluids, vol.96, issue.6???7, pp.385-395, 2011.
DOI : 10.1007/s00348-010-0937-6

E. Bideaux, P. Bobillier, E. Fournier, P. Gilliéron, M. E. Hajem et al., Drag reduction by pulsed jets on strongly unstructured wake: towards the square back control, International Journal of Aerodynamics, vol.1, issue.3/4, pp.282-298, 2011.
DOI : 10.1504/IJAD.2011.038846
URL : https://hal.archives-ouvertes.fr/hal-00582525

G. Fourrié, L. Keirsbulck, L. Labraga, and P. Gilliéron, Contrôle passif de l'écoulement autour d'une géométrie simplifiée de véhicule, 19ème Congrès Français de Mécanique, 2009.

M. Roume, P. Gillie-ron, and A. Kourta, Drag reduction by flow separation control on a car after body, International Journal for Numerical Methods in Fluids, vol.334, issue.4, pp.1222-1240, 2008.
DOI : 10.1016/j.compfluid.2008.01.009

G. Pujals, S. Depardon, and C. Cossu, Drag reduction of a 3D bluff body using coherent streamwise streaks, Experiments in Fluids, vol.14, issue.4???5, pp.1085-1094, 2010.
DOI : 10.1007/s00348-010-0857-5
URL : https://hal.archives-ouvertes.fr/hal-01020631

S. Krajnovi? and Ö. J. , LES of active flow control around an Ahmed body with active flow control, Conference on Modelling Fluid Flow (CMFF'09), 2009.

J. Beaudoin and A. , Drag and lift reduction of a 3D bluff body using flaps, Experiments in Fluids, vol.42, issue.5, pp.491-501, 2008.
DOI : 10.1007/s00348-007-0392-1
URL : https://hal.archives-ouvertes.fr/hal-00173194

D. C. Mccormick, Boundary Layer Separation Control with direct Synthetic jets, 25th AIAA Fluid Dynamics Conference, pp.1-11, 2000.

T. Duriez, Application des générateurs de vortex au contrôle d'écoulements décollés, 2009.

T. Duriez, J. Aider, and W. J. , Non-Linear Modulation of a Boundary Layer Induced by Vortex Generators, 4th Flow Control Conference, pp.2008-4076, 2008.
DOI : 10.2514/6.2008-4076

B. Lehugeur, P. Gilliéron, and P. Bobillier, Contr??le des structures tourbillonnaires longitudinales dans le sillage d'une g??om??trie simplifi??e de v??hicule automobile: approche exp??rimentale, M??canique & Industries, vol.9, issue.6, pp.533-541, 2009.
DOI : 10.1051/meca/2009017

B. Lehugeur, P. Gilliéron, and T. Ivanic, Contribution de l'??clatement tourbillonnaire ?? la r??duction de la tra??n??e des v??hicules automobiles : approche num??rique, Comptes Rendus M??canique, vol.334, issue.6, pp.368-372, 2006.
DOI : 10.1016/j.crme.2006.04.003

J. K. Harvey, Some observations of the vortex breakdown phenomenon, Journal of Fluid Mechanics, vol.14, issue.04, pp.585-592, 1962.
DOI : 10.1017/S0022112062001470

C. H. Bruneau, E. Creuse, D. Depeyras, P. Gilliéron, and I. Mortazavi, Active procedures to control the flow past the Ahmed body with a 25?? rear window, International Journal of Aerodynamics, vol.1, issue.3/4, pp.299-317, 2011.
DOI : 10.1504/IJAD.2011.038847
URL : https://hal.archives-ouvertes.fr/hal-00664963

A. Brunn, E. Wassen, D. Sperber, W. Nitsche, and F. Thiele, Active Drag Control for a Generic Car Model, Active Flow Control, pp.247-259, 2007.
DOI : 10.1007/978-3-540-71439-2_15

D. Krentel, R. Muminovic, A. Brunn, W. Nitsche, and K. R. , Application of Active Flow Control on Generic 3D Car Models, Active Flow Control II, pp.223-239, 2010.
DOI : 10.1007/978-3-642-11735-0_15

P. Gilliéron, La technique des visualisations pariétales, Aérodynamique Appliquée, pp.19-26, 2000.

E. Naudascher and R. D. , Flow-Induced Vibrations: An Engineering Guide, 2005.

B. Lecordier, Technique avancée en traitement PIV et précision, Ecole AFVL, pp.1-121, 2007.

J. Cousteix, Aérodynamique -Turbulence et couche limite, 1989.

G. Fourrié, Caractérisation pariétale instationnaire et contrôle de l'écoulement autour d'un corps épais, Thèse de l'Université de Valencienne et du Hainaut-Cambrésis, 2011.

M. Kiya and K. Sasaki, Structure of large-scale vortices and unsteady reverse flow in the reattaching zone of a turbulent separation bubble, Journal of Fluid Mechanics, vol.144, issue.-1, pp.463-491, 1985.
DOI : 10.1063/1.864046

L. Cortelezzi and K. A. , On the formation of the counter-rotating vortex pair in transverse jets, Journal of Fluid Mechanics, vol.446, pp.347-373

T. Duriez, J. Aider, and W. J. , Self-Sustaining Process through Streak Generation in a Flat-Plate Boundary Layer, Physical Review Letters, vol.103, issue.14, 2009.
DOI : 10.1103/PhysRevLett.103.144502

T. Duriez, J. Aider, and W. J. , Base Flow Modification by Streamwise Vortices: Application to the Control of Separated Flows, Volume 2: Fora, pp.1-6, 2006.
DOI : 10.1115/FEDSM2006-98541
URL : https://hal.archives-ouvertes.fr/hal-00173184

T. Duriez, J. Aider, and W. J. , Control of a Separated Flow over a Smoothly Contoured Ramp Using Vortex Generators, IUTAM Symposium on Flow Control and MEMS, pp.437-441, 2008.
DOI : 10.1007/978-1-4020-6858-4_56
URL : https://hal.archives-ouvertes.fr/hal-00173223

E. Wassen, S. Eichinger, and F. Thiele, Simulation of Active Drag Reduction for a Square-Back Vehicle Active Flow Control II, pp.241-255, 2010.