A. Meena and M. Mansori, Material Characterization of Austempered Ductile Iron (ADI) Produced by a Sustainable Continuous Casting???Heat Treatment Process, Metallurgical and Materials Transactions A, vol.10, issue.3, pp.4755-4766, 2012.
DOI : 10.1007/s11661-012-1271-9

A. Meena and M. Mansori, Correlative thermal methodology for castability simulation of ductile iron in ADI production, Journal of Materials Processing Technology, vol.212, issue.11, pp.2484-2495, 2012.
DOI : 10.1016/j.jmatprotec.2012.06.005

A. Meena and M. Mansori, Drilling performance of green austempered ductile iron (ADI) grade produced by novel manufacturing technology, The International Journal of Advanced Manufacturing Technology, vol.173, issue.3, pp.9-19, 2012.
DOI : 10.1007/s00170-011-3469-1

A. Meena and M. Mansori, Study of dry and minimum quantity lubrication drilling of novel austempered ductile iron (ADI) for automotive applications, Wear, vol.271, issue.9-10, pp.9-10, 2011.
DOI : 10.1016/j.wear.2010.12.022

A. Meena and M. Mansori, Chip morphology characteristics during dry drilling of austempered ductile iron (ADI) Transactions of the North American Manufacturing Research Institute of SME 40, pp.414-422, 2012.

A. Meena, M. Mansori, . El, P. Ghidossi, and A. Mkaddem, Anti-friction Coating for Drilling of Green Austempered Ductile Iron (ADI) grade, AIP Conference Proceedings of ESAFORM, pp.1800-1805, 1353.
DOI : 10.1063/1.3589777

A. Meena, M. Mansori, . El, and P. Ghidossi, Machinability of Austempered Ductile Iron (ADI) Produced by Integrated Green Technology of Continuous Casting-Heat Treatment Processes, AIP Conference Proceedings of AMPT (1315), pp.1521-1526, 2010.
DOI : 10.1063/1.3552404

A. Meena, M. Mansori, and . El, Chip morphology characteristics during dry drilling of austempered ductile iron (ADI) Transactions of the North American Manufacturing Research Institute of SME 40, 2012.

A. Meena, M. Mansori, and . El, Cutting performance of PVD coatings during dry drilling of sustainable austempered ductile iron (ADI). ICMCTF 2012, 2012.

A. Meena and M. Mansori, Study of dry and minimum quantity lubrication drilling of novel austempered ductile iron (ADI) for automotive applications, Wear, vol.271, issue.9-10, 2011.
DOI : 10.1016/j.wear.2010.12.022

A. Meena, M. Mansori, . El, P. Ghidossi, and A. Mkaddem, Anti-friction coating for drilling of green Austempered Ductile Iron (ADI) grade. ESAFORM, 2011.

A. Meena, M. Mansori, . El, and P. Ghidossi, Machinability of Austempered Ductile Iron (ADI) Produced by Integrated Green Technology of Continuous Casting-Heat Treatment Processes, 2010.
DOI : 10.1063/1.3552404

A. Meena, M. Mansori, and . El, A novel process route for light weight austempered ductile iron (ADI) casting production using integrated casting-heat treatment technology (Under examination)

K. Marukawa and K. L. Edwards, Development of iron and steel into eco-material, Materials & Design, vol.22, issue.2, pp.133-136, 2000.
DOI : 10.1016/S0261-3069(00)00054-6

K. L. Edwards, Strategic substitution of new materials for old: Applications in automotive product development, Materials & Design, vol.25, issue.6, pp.529-533, 2004.
DOI : 10.1016/j.matdes.2003.12.008

M. I. Onsoien, O. Grong, O. Gundersen, and T. Skaland, A process model for the microstructure evolution in ductile cast iron: Part I. the model, Metallurgical and Materials Transactions A, vol.10, issue.4, pp.1053-1068, 1999.
DOI : 10.1007/s11661-999-0158-x

J. Yang and S. K. Putatunda, Improvement in strength and toughness of austempered ductile cast iron by a novel two-step austempering process, Materials & Design, vol.25, issue.3, pp.219-230, 2004.
DOI : 10.1016/j.matdes.2003.09.021

A. Trudel and M. Gagne, Effect of Composition and Heat Treatment Parameters on the Characteristics of Austempered Ductile Irons, Canadian Metallurgical Quarterly, vol.93, issue.1, pp.289-298, 1997.
DOI : 10.1179/cmq.1986.25.1.79

L. C. Chang, Carbon content of austenite in austempered ductile iron, Scripta Materialia, vol.39, issue.1, pp.35-38, 1998.
DOI : 10.1016/S1359-6462(98)00132-8

A. A. Nofal and L. Jekova, Novel processing techniques and applications of austempered ductile iron (review), Journal of the University of Chemical Technology and Metallurgy, vol.44, issue.3, pp.213-228, 2009.

J. Zimba, D. J. Simbi, and E. Navara, Austempered ductile iron: an alternative material for earth moving components, Cement and Concrete Composites, pp.643-649, 2003.
DOI : 10.1016/S0958-9465(02)00078-1

U. R. Kumari and P. P. Rao, Study of wear behaviour of austempered ductile iron, Journal of Materials Science, vol.31, issue.9, pp.1082-1093, 2009.
DOI : 10.1007/s10853-008-3195-8

I. Rio-tinto-iron and &. Titanium, Ductile iron data for design engineers, tech. rep, 1998.

M. F. Ashby, Materials selection in mechanical design, Le Journal de Physique IV, vol.03, issue.C7, 2005.
DOI : 10.1051/jp4:1993701

URL : https://hal.archives-ouvertes.fr/jpa-00251707

J. M. Allwood and M. C. Jonathan, Sustainable Materials -with both eyes open, UIT Cambridge Ltd, 2012.

H. K. Tonshoff, W. Spintig, W. Konig, and A. Neises, Machining of Holes Developments in Drilling Technology, CIRP Annals - Manufacturing Technology, vol.43, issue.2, pp.551-561, 1994.
DOI : 10.1016/S0007-8506(07)60501-0

J. R. Davis, Cast Irons: ASM specialty handbook, 1996.

S. Lampman and E. , Casting Design and Performance, 2009.

J. R. Davis, Alloying: Understanding the Basics, 2001.

A. Basso, M. Caldera, M. Chapetti, and J. Sikora, Mechanical Characterization of Dual Phase Austempered Ductile Iron, ISIJ International, vol.50, issue.2, pp.302-306, 2010.
DOI : 10.2355/isijinternational.50.302

F. Klocke, M. Arft, and D. Lung, Material-related aspects of the machinability of Austempered Ductile Iron, Production Engineering, vol.57, issue.1, pp.433-441, 2010.
DOI : 10.1007/s11740-010-0227-4

T. Skaland, O. Grong, and T. Grong, A model for the graphite formation in, Metallurgical Transactions A, vol.31, issue.3, pp.2321-2345, 1993.
DOI : 10.1016/0025-5416(84)90207-6

D. M. Stefanescu, Solidification and modeling of castiron-a short history of the defining moments, Materials Science and Engineering: A, pp.413-414, 2005.

J. R. Brown, Foseco Ferrous Foundrymans Handbook, 2000.

B. Y. Lin, E. T. Chen, and T. S. Lei, The effect of alloy elements on the microstructure and properties of austempered ductile irons, Scripta Metallurgica et Materialia, vol.32, issue.9, pp.1363-1367, 1995.
DOI : 10.1016/0956-716X(95)00172-R

J. O. Choi, J. Y. Kim, C. O. Choi, J. K. Kim, and P. K. Rohatgi, Effect of rare earth element on microstructure formation and mechanical properties of thin wall ductile iron castings, Materials Science and Engineering: A, vol.383, issue.2, pp.323-333, 2004.
DOI : 10.1016/j.msea.2004.04.060

S. Bockus and A. Dobrovolskis, Effect of melting techniques on ductile iron castings properties, pp.13-16, 2006.

M. H. Jacobs, T. J. Law, D. A. Melford, and M. J. Stowell, Basic processes controlling the nucleation of graphite nodules in chill cast iron, Metals Technology, vol.210, issue.1, pp.490-500, 1974.
DOI : 10.1111/j.1151-2916.1963.tb11756.x

M. Wessen and I. L. Svesson, Handbook of Mechanical Alloy Design, 2004.

A. Boudot, V. Gerval, D. Oquab, J. Lacaze, and H. Santos, The role of manganese and copper in the eutectoid transformation of spheroidal graphite cast iron, Metallurgical and Materials Transactions A, vol.16, issue.10, pp.2015-2025, 1997.
DOI : 10.1007/s11661-997-0158-7

C. V. White, R. A. Flinn, and P. K. Trojan, An investigation of three different methods of nodularity evaluation in ductile cast iron, Transactions, vol.89, pp.639-644, 1981.

I. Riposan, M. Chisamera, S. Stan, T. Skaland, and M. Onsoien, Analysis of possible nucleation sites in Ca/Sr over-inoculated grey irons, AFS Transactions, vol.109, pp.1151-1162, 2001.

K. M. Pedersen and N. S. Tiedje, Graphite nodule count and size distribution in thin-walled ductile cast iron, Materials Characterization, vol.59, issue.8, pp.1111-1121, 2008.
DOI : 10.1016/j.matchar.2007.09.001

P. A. Blackmore and R. A. Hardning, The effects of metallurgical process variables on the properties of austempered ductile irons, Journal of Heat Treating, vol.85, issue.1, pp.310-325, 1984.
DOI : 10.1007/BF02833125

U. Batra, S. Ray, and S. R. Prabhakar, Mathematical Model for Austenitization Kinetics of Ductile Iron, Journal of Materials Engineering and Performance, vol.14, issue.5, pp.574-581, 2005.
DOI : 10.1361/105994905X64512

U. Batra, S. Ray, and S. R. Prabhakar, Effect of Austenitization on Austempering of Copper Alloyed Ductile Iron, Journal of Materials Engineering and Performance, vol.12, issue.5, pp.597-601, 2003.
DOI : 10.1361/105994903100277120

M. Erdogan, V. Kilicli, and B. Demir, Transformation characteristics of ductile iron austempered from intercritical austenitizing temperature ranges, Journal of Materials Science, vol.13, issue.5, pp.1394-1403, 2009.
DOI : 10.1007/s10853-006-1415-7

J. Achary and D. Venugopalan, Microstructural development and austempering kinetics of ductile iron during thermomechanical processing, Metallurgical and Materials Transactions A, vol.95, issue.10, pp.2575-2585, 2000.
DOI : 10.1007/s11661-000-0202-3

Y. Amran, A. Katsman, P. Schaaf, and M. Bamberger, Influence of Copper Addition and Temperature on the Kinetics of Austempering in Ductile Iron, Metallurgical and Materials Transactions B, vol.8, issue.436, pp.1052-1058, 2010.
DOI : 10.1007/s11663-010-9388-y

R. Gregorutti, K. Laneri, J. Desimoni, and R. C. Mercader, Study of the austempering transformation kinetics in compacted graphite cast irons, Metallurgical and Materials Transactions A, vol.78, issue.C4, pp.103-110, 2004.
DOI : 10.1007/s11661-004-0113-9

N. Darwish and R. Elliott, Austempering of low manganese ductile irons, Materials Science and Technology, vol.5, issue.7, pp.572-585, 1993.
DOI : 10.1179/mst.1993.9.7.572

N. Darwish and R. Elliott, Austempering of low manganese ductile irons, Materials Science and Technology, vol.5, issue.7, pp.586-602, 1993.
DOI : 10.1179/mst.1993.9.7.586

M. Bahmani, R. Elliott, and N. Varahram, The austempering kinetics and mechanical properties of an austempered Cu-Ni-Mo-Mn alloyed ductile iron, Journal of Materials Science, vol.32, issue.18, pp.4783-4791, 1997.
DOI : 10.1023/A:1018687115732

F. Klocke, Manufacturing Processes 1: Cutting (RWTH Edition, 2011.
DOI : 10.1007/978-3-642-11979-8

L. Sidjanin, M. Novovic, and R. E. Smallman, Metallographic investigations of adi materials, Practical Metallography, vol.33, issue.1, pp.2-16, 1996.

S. Shepperson and C. Allen, The abrasive wear behaviour of austempered spheroidal cast irons, Wear, vol.121, issue.3, pp.271-287, 1988.
DOI : 10.1016/0043-1648(88)90206-2

P. Dhanapal and S. S. Mohamed-nazirudeen, Multi-response optimization of carbidic austempered ductile iron production parameters using taguchi technique, Journal of Scientific and Industrial Research, vol.70, issue.4, pp.284-288, 2011.

B. V. Kovacs, Austempered ductile iron: Fact and fiction, " Modern Casting, pp.38-41, 1990.

R. Castillo, V. Bermont, and V. Martinez, Relaciones entre la microestructura y las propiedades mec??nicas en fundiciones nodulares: revisi??n bibliogr??fica, Revista de Metalurgia, vol.35, issue.5, pp.329-334, 1999.
DOI : 10.3989/revmetalm.1999.v35.i5.641

URL : http://doi.org/10.3989/revmetalm.1999.v35.i5.641

U. Batra, S. Ray, and S. R. Prabhakar, The Influence of Nickel and Copper on the Austempering of Ductile Iron, Journal of Materials Engineering and Performance, vol.13, issue.1, pp.64-68, 2004.
DOI : 10.1361/10599490417515

B. Bosnjak, V. Asanovic, B. Radulovic, and K. Pop-tonev, Influence of Microalloying and Heat Treatment on the Kinetics of Bainitic Reaction in Austempered Ductile Iron, Journal of Materials Engineering and Performance, vol.10, issue.2, pp.203-211, 2001.
DOI : 10.1361/105994901770345222

J. Schissler and J. Saverna, The effect of segregation on the formation of austempered ductile iron, Journal of Heat Treating, vol.13, issue.2, pp.167-176, 1985.
DOI : 10.1007/BF02833136

B. Avishan, S. Yazdani, and D. Jalali-vahid, The influence of depth of cut on the machinability of an alloyed austempered ductile iron, Materials Science and Engineering: A, vol.523, issue.1-2, pp.93-98, 2009.
DOI : 10.1016/j.msea.2009.05.044

M. A. Yescas, H. K. Bhadeshia, and D. J. Mackay, Estimation of the amount of retained austenite in austempered ductile irons using neural networks, Materials Science and Engineering: A, vol.311, issue.1-2, pp.162-173, 2001.
DOI : 10.1016/S0921-5093(01)00913-3

M. C. Cakir, A. Bayram, Y. Isik, and B. Salar, The effects of austempering temperature and time onto the machinability of austempered ductile iron, Materials Science and Engineering: A, vol.407, issue.1-2, pp.147-153, 2005.
DOI : 10.1016/j.msea.2005.07.005

Y. Isik, Investigating the machinability of tool steels in turning operations, Materials & Design, vol.28, issue.5, pp.1417-1424, 2007.
DOI : 10.1016/j.matdes.2006.03.025

S. Dolinsek, Work-hardening in the drilling of austenitic stainless steels, Journal of Materials Processing Technology, vol.133, issue.1-2, pp.63-70, 2003.
DOI : 10.1016/S0924-0136(02)00245-5

S. K. Putatunda, S. Kesani, R. Tackett, and G. Lawes, Development of austenite free ADI, Materials Science and Engineering A, pp.435-436, 2006.

K. Katuku, A. Koursaris, and I. Sigalas, Wear, cutting forces and chip characteristics when dry turning ASTM Grade 2 austempered ductile iron with PcBN cutting tools under finishing conditions, Journal of Materials Processing Technology, vol.209, issue.5, pp.2412-2420, 2009.
DOI : 10.1016/j.jmatprotec.2008.05.042

V. P. Astakhov, Tribology of metal Cutting, 2006.

R. O. Marwanga, R. C. Voigt, and P. H. Cohen, Influence of graphite morphology and matrix structure on chip formation during machining of gray irons, AFS Transactions, vol.107, pp.595-607, 1999.

D. F. Klocke, C. Klopper, D. Lung, and C. Essig, Fundamental Wear Mechanisms when Machining Austempered Ductile Iron (ADI), CIRP Annals - Manufacturing Technology, vol.56, issue.1, pp.73-76, 2007.
DOI : 10.1016/j.cirp.2007.05.020

M. I. Sadik and T. Myrtveit, The performance of PVD coated grade in milling of ADI 800, World Academy of Science, Engineering and Technology, vol.53, pp.527-530, 2009.

M. Masuda, T. Sato, T. Kori, and Y. Chujo, Cutting performance and wear mechanism of alumina-based ceramic tools when machining austempered ductile iron, Wear, vol.174, issue.1-2, pp.147-153, 1994.
DOI : 10.1016/0043-1648(94)90096-5

V. A. Cristino, P. A. Rosa, and P. A. Martins, Cutting under active and inert gas shields: A contribution to the mechanics of chip flow, International Journal of Machine Tools and Manufacture, vol.50, issue.10, pp.892-900, 2010.
DOI : 10.1016/j.ijmachtools.2010.06.003

M. Goldberg, J. T. Berry, G. Littlefair, and G. Smith, A study of the machinability of an astm grade 3 austempered ductile iron, Proceedings of the 2002 World Conference on ADI for Casting Producers, Suppliers and Design Engineers, 2002.

K. Katuku, A. Koursaris, and I. Sigalas, Wear mechanisms of PcBN cutting tools when dry turning ASTM Grade 2 austempered ductile iron under finishing conditions, Wear, vol.268, issue.1-2, pp.294-301, 2010.
DOI : 10.1016/j.wear.2009.08.027

U. I. Aslantas, The performance of ceramic and cermet cutting tools for the machining of austempered ductile iron, The International Journal of Advanced Manufacturing Technology, vol.146, issue.7-8, pp.642-650, 2009.
DOI : 10.1007/s00170-008-1528-z

F. Klocke, Dry Cutting, CIRP Annals - Manufacturing Technology, vol.46, issue.2, pp.519-526, 1997.
DOI : 10.1016/S0007-8506(07)60877-4

A. Meena and M. Mansori, Study of dry and minimum quantity lubrication drilling of novel austempered ductile iron (ADI) for automotive applications, Wear, vol.271, issue.9-10, pp.9-10, 2011.
DOI : 10.1016/j.wear.2010.12.022

H. K. Tonshoff and A. Mohlfeld, PVD-Coatings for wear protection in dry cutting operations, Surface and Coatings Technology, vol.93, issue.1, pp.88-92, 1997.
DOI : 10.1016/S0257-8972(97)00027-3

P. Beeley, Foundry Technology Butterworth-Heinemann, 2001.

S. O. Seidu and I. Riposan, Thermal analysis of inoculated ductile irons, U.P.B. Sci. Bull., Series B, vol.73, pp.241-254, 2011.

H. Cruz, C. Gonzalez, A. Juarez, M. Herrera, and J. Juarez, Quantification of the microconstituents formed during solidification by the Newton thermal analysis method, Journal of Materials Processing Technology, vol.178, issue.1-3, pp.1-3, 2006.
DOI : 10.1016/j.jmatprotec.2006.03.152

J. Sertucha, R. Suárez, I. Asenjo, P. L. Naga, J. Lacaze et al., Thermal Analysis of the Formation of Chunky Graphite during Solidification of Heavy-section Spheroidal Graphite Iron Parts, ISIJ International, vol.49, issue.2, pp.220-228, 2009.
DOI : 10.2355/isijinternational.49.220

R. Zhou, Y. Jiang, D. Lu, R. Zhou, and Z. Li, Development and characterization of a wear resistant bainite/martensite ductile iron by combination of alloying and a controlled cooling heat-treatment, Wear, vol.250, issue.1-12, pp.529-534, 2001.
DOI : 10.1016/S0043-1648(01)00603-2

G. Dieter, Mechanical Metallurgy, SI Metric Edition, 1988.

S. Zhou, K. Zhang, Y. Wang, J. Gu, and Y. Rong, The Mechanism of High Strength-Ductility Steel Produced by a Novel Quenching-Partitioning-Tempering Process and the Mechanical Stability of Retained Austenite at Elevated Temperatures, Metallurgical and Materials Transactions A, vol.41, issue.565, pp.1026-1034, 2012.
DOI : 10.1007/s11661-011-0929-z

Y. Waseda, E. Matsubara, and K. Shinoda, X-Ray Diffraction Crystallography, 2011.
DOI : 10.1007/978-3-642-16635-8

S. K. Putatunda and P. K. Gadicherla, Influence of austenitizing temperature on fracture toughness of a low manganese austempered ductile iron (ADI) with ferritic as cast structure, Materials Science and Engineering: A, vol.268, issue.1-2, pp.15-31, 1999.
DOI : 10.1016/S0921-5093(99)00120-3

J. M. Allwood, M. F. Ashby, T. G. Gutowski, and E. Worrell, Material efficiency: A white paper, Resources, Conservation and Recycling, pp.362-381, 2011.
DOI : 10.1016/j.resconrec.2010.11.002

S. Vinodh and K. Jayakrishna, Environmental impact minimisation in an automotive component using alternative materials and manufacturing processes, Materials & Design, vol.32, issue.10, pp.5082-5090, 2011.
DOI : 10.1016/j.matdes.2011.06.025

J. F. Janowak and R. B. Gundlach, Approaching austempered ductile iron properties by controlled cooling in the foundry, Journal of Heat Treating, vol.68, issue.5, pp.25-31, 1985.
DOI : 10.1007/BF02835486

A. Meena and M. Mansori, Drilling performance of green austempered ductile iron (ADI) grade produced by novel manufacturing technology, The International Journal of Advanced Manufacturing Technology, vol.173, issue.3, pp.9-19, 2012.
DOI : 10.1007/s00170-011-3469-1

E. Haruman, Y. Sun, A. Triwiyanto, Y. H. Manurung, and E. Y. Adesta, An Investigation on Low-Temperature Thermochemical Treatments of Austenitic Stainless Steel in Fluidized Bed Furnace, Journal of Materials Engineering and Performance, vol.77, issue.126, pp.388-394, 2012.
DOI : 10.1007/s11665-011-9927-y

F. Salazar, M. Herrera-trejo, M. Castro, N. J. Mendez, T. J. Torres et al., Effect of Nodule Count and Cooling Rate on As-Cast Matrix of a Cu-Mo Spheroidal Graphite, Journal of Materials Engineering and Performance, vol.8, issue.3, pp.325-329, 1999.
DOI : 10.1361/105994999770346873

U. Seker and H. Hasirci, Evaluation of machinability of austempered ductile irons in terms of cutting forces and surface quality, Journal of Materials Processing Technology, vol.173, issue.3, pp.260-268, 2006.
DOI : 10.1016/j.jmatprotec.2005.05.058

P. R. Rao and S. K. Putatunda, Investigations on the fracture toughness of austempered ductile irons austenitized at different temperatures, Materials Science and Engineering: A, vol.349, issue.1-2, pp.136-149, 2003.
DOI : 10.1016/S0921-5093(02)00633-0

P. Jacques, F. Delannay, X. Cornet, P. Harlet, and J. Ladriere, Enhancement of the mechanical properties of a low-carbon, low-silicon steel by formation of a multiphased microstructure containing retained Austenite, Metallurgical and Materials Transactions A, vol.35, issue.10, pp.2383-2393, 1998.
DOI : 10.1007/s11661-998-0114-1

D. Drobnjak and J. Parr, Deformation substructure and strain-hardening characteristics of metastable fe-mn austenites, Metallurgical and Materials Transactions B, vol.1, pp.759-765, 1970.

M. R. Barkhudarov and C. W. Hirt, Casting simulation: mold filling and solidificationbenchmark calculations using FLOW-3D, tech. rep., Flow Science, Inc, 1993.

S. V. Shepel and S. Paolucci, Numerical simulation of filling and solidification of permanent mold castings, Applied Thermal Engineering, vol.22, issue.2, pp.229-248, 2002.
DOI : 10.1016/S1359-4311(01)00068-0

F. Lau, W. B. Lee, S. M. Xiong, and B. C. Liu, A study of the interfacial heat transfer between an iron casting and a metallic mould, Journal of Materials Processing Technology, vol.79, issue.1-3, pp.1-3, 1998.
DOI : 10.1016/S0924-0136(97)00449-4

C. A. Santos, J. M. Quaresma, and A. Garcia, Determination of transient interfacial heat transfer coefficients in chill mold castings, Journal of Alloys and Compounds, vol.319, issue.1-2, pp.174-186, 2001.
DOI : 10.1016/S0925-8388(01)00904-5

N. Pathak, A. Kumar, A. Yadav, and P. Dutta, Effects of mould filling on evolution of the solid???liquid interface during solidification, Applied Thermal Engineering, vol.29, issue.17-18, pp.17-18, 2009.
DOI : 10.1016/j.applthermaleng.2009.06.026

M. M. Pariona and A. C. Mossi, Numerical simulation of heat transfer during the solidification of pure iron in sand and mullite molds, Journal of the Brazilian Society of Mechanical Sciences and Engineering, vol.27, issue.4, pp.399-406, 2005.
DOI : 10.1590/S1678-58782005000400008

Q. Han and H. Xu, Fluidity of alloys under high pressure die casting conditions, Scripta Materialia, vol.53, issue.1, pp.7-10, 2005.
DOI : 10.1016/j.scriptamat.2005.03.025

K. R. Ravi, R. M. Pillai, K. R. Amaranathan, B. C. Pai, and M. Chakraborty, Fluidity of aluminum alloys and composites: A review, Journal of Alloys and Compounds, vol.456, issue.1-2, pp.201-210, 2008.
DOI : 10.1016/j.jallcom.2007.02.038

M. A. Gafur, M. N. Haque, and K. N. Prabhu, Effect of chill thickness and superheat on casting/chill interfacial heat transfer during solidification of commercially pure aluminium, Journal of Materials Processing Technology, vol.133, issue.3, pp.257-265, 2003.
DOI : 10.1016/S0924-0136(02)00459-4

J. Sengupta, B. Thomas, and M. Wells, The use of water cooling during the continuous casting of steel and aluminum alloys, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, pp.187-204, 2005.
DOI : 10.1007/s11661-005-0151-y

T. R. Vijayaram, S. Sulaiman, A. M. Hamouda, and M. H. Ahmad, Numerical simulation of casting solidification in permanent metallic molds, Journal of Materials Processing Technology, vol.178, issue.1-3, pp.1-3, 2006.
DOI : 10.1016/j.jmatprotec.2005.09.025

D. Emadi, L. V. Whiting, S. Nafisi, and R. Ghomashchi, Applications of thermal analysis in quality control of solidification processes, Journal of Thermal Analysis and Calorimetry, vol.81, issue.1, pp.235-242, 2005.
DOI : 10.1007/s10973-005-0772-9

A. Kermanpur, S. Mahmoudi, and A. Hajipour, Numerical simulation of metal flow and solidification in the multi-cavity casting moulds of automotive components, Journal of Materials Processing Technology, vol.206, issue.1-3, pp.1-3, 2008.
DOI : 10.1016/j.jmatprotec.2007.12.004

G. Miller, Control volume meshes using sphere packing, In: Solving Irregularly Structured Problems in Parallel, vol.1457, pp.128-131, 1998.
DOI : 10.1007/BFb0018533

D. V. Alexandrov, Theory of solidification with a quasi-equilibrium two-phase zone, Doklady Physics, vol.45, issue.11, pp.569-573, 2000.
DOI : 10.1134/1.1333856

D. V. Alexandrov, On the theory of the formation of the two-phase concentration-supercooling region, Doklady Physics, vol.48, issue.9, pp.481-486, 2003.
DOI : 10.1134/1.1616055

D. V. Alexandrov, Solidification with a quasiequilibrium two-phase zone, Acta Materialia, vol.49, issue.5, pp.759-764, 2001.
DOI : 10.1016/S1359-6454(00)00388-8

W. D. Griffiths, A model of the interfacial heat-transfer coefficient during unidirectional solidification of an aluminum alloy, Metallurgical and Materials Transactions B, vol.8, issue.2, pp.285-295, 2000.
DOI : 10.1007/s11663-000-0047-6

M. D. Chaudhari, R. W. Heine, and C. R. Loper-jr, Principles involved in the use of cooling curves in ductile iron process control, pp.431-440, 1974.

J. Campbell, Castings practice, 2004.

A. K. Jha, R. Asthana, T. K. Dan, and P. K. Rohatgi, Effect of dispersed graphite on the freezing rate of gravity die-cast LM 13 alloy-3 wt % graphite particle composite, Journal of Materials Science Letters, vol.18, issue.2, pp.225-228, 1987.
DOI : 10.1007/BF01728994

W. Jiang, J. Dong, L. Wang, and L. Lou, Effect of Casting Modulus on Microstructure and Segregation in K441 Superalloy Casting, Journal of Materials Science & Technology, vol.27, issue.9, pp.831-840, 2011.
DOI : 10.1016/S1005-0302(11)60151-5

K. Ho and R. Pehlke, Metal-Mold interfacial heat transfer, Metallurgical Transactions B, vol.91, issue.3, pp.585-594, 1985.
DOI : 10.1007/BF02654857

K. D. Carlson and C. Beckermann, Prediction of Shrinkage Pore Volume Fraction Using a Dimensionless Niyama Criterion, Metallurgical and Materials Transactions A, vol.28, issue.1, pp.163-175, 2009.
DOI : 10.1007/s11661-008-9715-y

K. D. Carlson, S. Ou, R. A. Hardin, and C. Beckermann, Development of new feeding-distance rules using casting simulation: Part I. Methodology, Metallurgical and Materials Transactions B, vol.25, issue.3, pp.731-740, 2002.
DOI : 10.1007/s11663-002-0027-0

K. Kubo and R. D. Pehlke, Mathematical modeling of porosity formation in solidification, Metallurgical Transactions B, vol.46, issue.2, pp.359-366, 1985.
DOI : 10.1007/BF02679728

J. P. Davim, P. S. Sreejith, R. Gomes, and C. Peixoto, Experimental studies on drilling of aluminium (AA1050) under dry, minimum quantity of lubricant, and flood-lubricated conditions, Proceedings of the Institution of Mechanical Engineers, pp.1605-1611, 2006.
DOI : 10.1243/09544054JEM557

J. P. Davim, P. Reis, and C. C. Antonio, Experimental study of drilling glass fiber reinforced plastics (GFRP) manufactured by hand lay-up, Composites Science and Technology, vol.64, issue.2, pp.289-297, 2004.
DOI : 10.1016/S0266-3538(03)00253-7

P. S. Sreejith, R. Krishnamurthy, and S. K. Malhotra, Effect of specific cutting pressure and temperature during machining of carbon/phenolic ablative composite using PCBN tools, Journal of Materials Processing Technology, vol.183, issue.1, pp.88-95, 2007.
DOI : 10.1016/j.jmatprotec.2006.10.003

A. Bayoumi, G. Yucesan, and D. Hutton, On the closed form mechanistic modeling of milling: Specific cutting energy, torque, and power, Journal of Materials Engineering and Performance, vol.53, issue.1, pp.151-158, 1994.
DOI : 10.1007/BF02654511

K. Liu and S. N. Melkote, Material Strengthening Mechanisms and Their Contribution to Size Effect in Micro-Cutting, Journal of Manufacturing Science and Engineering, vol.128, issue.3, pp.730-738, 2006.
DOI : 10.1115/1.2193548

A. Molinari and A. Moufki, The Merchant's model of orthogonal cutting revisited: A new insight into the modeling of chip formation, International Journal of Mechanical Sciences, vol.50, issue.2, pp.124-131, 2008.
DOI : 10.1016/j.ijmecsci.2007.07.015

W. W. Olson, S. A. Batzer, and J. W. Sutherland, Modeling of chip dynamics in drilling, CIRP International Workshop on Modeling of Machining Operations, vol.2, pp.7-8, 1998.

S. A. Batzer, P. D. Rao, D. M. Haan, W. W. Olson, and J. W. Sutherland, An experimental investigation of chip morphology in drilling, S. M. Wu Symposium, vol.2, pp.102-107, 1996.

S. A. Batzer, D. M. Haan, P. D. Rao, W. W. Olson, and J. W. Sutherland, Chip morphology and hole surface texture in the drilling of cast Aluminum alloys, Journal of Materials Processing Technology, vol.79, issue.1-3, pp.72-78, 1998.
DOI : 10.1016/S0924-0136(97)00324-5

T. Hoshi and H. Zhao, Study of a High Performance Drill Geometry, CIRP Annals - Manufacturing Technology, vol.38, issue.1, pp.87-90, 1989.
DOI : 10.1016/S0007-8506(07)62657-2

J. A. Degenhardt, R. E. Devor, and S. G. Kapoor, Generalized groove-type chip breaker effects on drilling for different drill diameters and flute shapes, International Journal of Machine Tools and Manufacture, vol.45, issue.14, pp.1588-1597, 2005.
DOI : 10.1016/j.ijmachtools.2005.02.009

A. Akhavan-farid, S. Sharif, and M. H. Idris, Chip morphology study in high speed drilling of Al???Si alloy, The International Journal of Advanced Manufacturing Technology, vol.12, issue.1, pp.555-564, 2011.
DOI : 10.1007/s00170-011-3325-3

S. Dolinsek, S. Ekinovic, and J. Kopac, A contribution to the understanding of chip formation mechanism in high-speed cutting of hardened steel, Journal of Materials Processing Technology, vol.157, issue.158, pp.485-490, 2004.
DOI : 10.1016/j.jmatprotec.2004.07.144

I. S. Jawahir and C. A. Van-luttervelt, Recent Developments in Chip Control Research and Applications, CIRP Annals - Manufacturing Technology, vol.42, issue.2, pp.659-693, 1993.
DOI : 10.1016/S0007-8506(07)62531-1

V. P. Astakhov, Metal Cutting Mechanics, 1998.

S. Zhang and Y. B. Guo, An experimental and analytical analysis on chip morphology, phase transformation, oxidation, and their relationships in finish hard milling, International Journal of Machine Tools and Manufacture, vol.49, issue.11, pp.805-813, 2009.
DOI : 10.1016/j.ijmachtools.2009.06.006

J. Barry and G. Byrne, The Mechanisms of Chip Formation in Machining Hardened Steels, Journal of Manufacturing Science and Engineering, vol.124, issue.3, pp.528-535, 2002.
DOI : 10.1115/1.1455643

S. V. Subramanian, H. O. Gekonde, G. Zhu, X. Zhang, U. Urlau et al., Inclusion engineering of steel to prevent chemical tool wear, Ironmaking & Steelmaking, vol.34, issue.3, pp.249-257, 2004.
DOI : 10.1016/S0257-8972(01)01488-8

J. Barry and G. Byrne, Chip Formation, Acoustic Emission and Surface White Layers in Hard Machining, CIRP Annals - Manufacturing Technology, vol.51, issue.1, pp.65-70, 2002.
DOI : 10.1016/S0007-8506(07)61467-X

V. P. Astakhov, Geometry of single-point turning tools and drills, 2010.
DOI : 10.1007/978-1-84996-053-3

K. Holmberg and A. Matthews, Coatings tribology, 2009.

A. R. Rodrigues and R. T. Coelho, Influence of the tool edge geometry on specific cutting energy at high-speed cutting, Journal of the Brazilian Society of Mechanical Sciences and Engineering, vol.29, issue.3, pp.279-283, 2007.
DOI : 10.1590/S1678-58782007000300007

R. S. Pawade, S. S. Joshi, and P. K. Brahmankar, Effect of machining parameters and cutting edge geometry on surface integrity of high-speed turned Inconel 718, International Journal of Machine Tools and Manufacture, vol.48, issue.1, pp.15-28, 2008.
DOI : 10.1016/j.ijmachtools.2007.08.004

A. I. Fernandez-abia, J. Barreiro, L. N. Lopez-de-lacalle, and S. Martinez, Effect of very high cutting speeds on shearing, cutting forces and roughness in dry turning of austenitic stainless steels, The International Journal of Advanced Manufacturing Technology, vol.45, issue.1, pp.61-71, 2011.
DOI : 10.1007/s00170-011-3267-9