C. Figure, 3: Optical micrograph (x50) of a 316L stainless steel bulk sample made using SLM

C. Figure, Polarized optical micrograph (x50) of a 316L stainless steel bulk sample made using SLM C.2 Macroscopic mechanical testing Samples were made from 316L stainless steel powders using SLM. These samples were tested in compression. Photographs of the compressive experimental settings are shown in Figure C

. References and . Abouaf, Finite element simulation of hot isostatic pressing of metal powders, International Journal for Numerical Methods in Engineering, vol.2588, pp.191-212, 1988.

. Alderson, Elastic constants of 3-, 4- and 6-connected chiral and anti-chiral honeycombs subject to uniaxial in-plane loading, Composites Science and Technology, vol.70, issue.7, pp.1042-1048, 2010.
DOI : 10.1016/j.compscitech.2009.07.009

. Alderson, The strain dependent indentation resilience of auxetic microporous polyethylene, Journal of Materials Science, vol.3568, pp.4039-4047, 2000.

. Alderson, Auxetic Polyethylene -The Effect of a Negative Poisson Ratio on Hardness, Acta Metallurgica et Materialia, vol.4268, issue.7, pp.2261-2266, 1994.

R. F. Almgren, An isotropic three-dimensional structure with Poisson's ratio=-1, Journal of Elasticity, vol.1568, pp.427-430, 1985.

H. Altendorf, 3D Morphological Analysis and Modeling of Random Fiber Networks, Thèse de Doctorat, MINES-ParisTech, p.61, 2011.
URL : https://hal.archives-ouvertes.fr/pastel-00667398

A. Elipe, D. Lantada-]-alvarez-elipe, J. C. , D. Lantada, and A. , Comparative study of auxetic geometries by means of computer-aided design and engineering, Smart Materials and Structures, vol.2172, 2012.

. Amestoy, Multifrontal parallel distributed symmetric and unsymmetric solvers, Computer Methods in Applied Mechanics and Engineering, vol.184, issue.2-4, pp.501-520, 2000.
DOI : 10.1016/S0045-7825(99)00242-X
URL : https://hal.archives-ouvertes.fr/hal-00856651

M. F. Ashby, Materials selection in mechanical design, Le Journal de Physique IV, vol.03, issue.C7, 1999.
DOI : 10.1051/jp4:1993701
URL : https://hal.archives-ouvertes.fr/jpa-00251707

M. F. Ashby, Designing architectured materials, Scripta Materialia, vol.68, issue.1, pp.4-7, 2013.
DOI : 10.1016/j.scriptamat.2012.04.033

M. F. Ashby and Y. Bréchet, Designing hybrid materials, Acta Materialia, vol.51, issue.19, pp.5801-5821, 2003.
DOI : 10.1016/S1359-6454(03)00441-5

N. Auffray, Comportement des matériaux cellulaires ; élaboration, caractérisation et modélisation prédictive des propriétés, Thèse de Doctorat, 2008.

N. Auffray, D??monstration du th??or??me d'Hermann ?? partir de la m??thode Forte???Vianello, Comptes-Rendus de l'Académie des Sciences -Serie IIb : Mécanique, pp.458-463, 2008.
DOI : 10.1016/j.crme.2008.02.003
URL : https://hal.archives-ouvertes.fr/hal-00529633/file/ThHerman.pdf

. Badiche, Mechanical properties and non-homogeneous deformation of open-cell nickel foams: application of the mechanics of cellular solids and of porous materials, Materials Science and Engineering: A, vol.289, issue.1-2, pp.276-288, 2000.
DOI : 10.1016/S0921-5093(00)00898-4

. Barbe, Intergranular and intragranular behavior of polycrystalline aggregates. Part 1: F.E. model, International Journal of Plasticity, vol.17, issue.4, pp.513-536, 2001.
DOI : 10.1016/S0749-6419(00)00061-9

. Barbier, Numerical study of 3D-compressions of entangled materials, Computational Materials Science, vol.45, issue.3, pp.593-596, 2009.
DOI : 10.1016/j.commatsci.2008.06.003
URL : https://hal.archives-ouvertes.fr/hal-00388904

. Barbier, Role of friction in the mechanics of nonbounded fibrous materials, Physical Review E, vol.80109, issue.1, p.., 2009.

R. Bathurst, R. J. Bathurst, and L. Rothenburg, Note on a random isotropic granular material with negative poisson's ratio, International Journal of Engineering Science, vol.26, issue.4, pp.373-383, 1988.
DOI : 10.1016/0020-7225(88)90116-4

. Bensoussan, Asymptotic Analysis for Periodic Structures, Studies in Mathematics and its Applications, 1978.

M. J. Beran, Use of the vibrational approach to determine bounds for the effective permittivity in random media, Il Nuovo Cimento, vol.30, issue.2, pp.771-782, 1965.
DOI : 10.1007/BF02748596

M. J. Beran, Statistical Continuum Theories, 1968.
DOI : 10.1119/1.1974326

M. Beran, M. J. Beran, and J. Molyneux, Use of classical variational principles to determine bounds for the effective bulk modulus in heterogeneous media, Quarterly of Applied Mathematics, vol.24, issue.2, pp.107-118, 1966.
DOI : 10.1090/qam/99925

. Bornert, Homogénéisation en mécanique des matériaux, Matériaux aléatoires élastiques et milieux périodiques, pp.47-189, 0190.

. Bréchet, . Embury, Y. Bréchet, and J. D. Embury, Architectured materials: Expanding materials space, Scripta Materialia, vol.68, issue.1, pp.1-3, 2013.
DOI : 10.1016/j.scriptamat.2012.07.038

. Brinker, Sol-gel strategies for controlled porosity inorganic materials, Journal of Membrane Science, vol.94, issue.1, pp.85-102, 1994.
DOI : 10.1016/0376-7388(93)E0129-8

D. A. Bruggeman, Berechnung verschiedener physikalischer Konstanten von heterogenen Substanzen. I. Dielektrizitätskonstanten und Leitfähigkeiten der Mischkörper aus isotropen Substanzen, Annalen der Physik, vol.41634, issue.7, pp.636-664, 1935.

B. Budiansky, On the elastic moduli of some heterogeneous materials, Journal of the Mechanics and Physics of Solids, vol.13, issue.4, pp.223-227, 1965.
DOI : 10.1016/0022-5096(65)90011-6

. Caddock, . Evans, B. D. Caddock, and K. E. Evans, Microporous materials with negative Poisson's ratios. I. Microstructure and mechanical properties, Journal of Physics D: Applied Physics, vol.22, issue.12, pp.1877-1882, 1989.
DOI : 10.1088/0022-3727/22/12/012

. Cailletaud, Some elements of microstructural mechanics, Computational Materials Science, vol.27, issue.3, pp.351-374, 2003.
DOI : 10.1016/S0927-0256(03)00041-7

. Cailletaud, Size effect on elastic properties of random composites, Engineering Computations, vol.11, issue.2, pp.99-110, 1994.
DOI : 10.1108/02644409410799227

A. Cauchy, De la pression ou tension dans un corps solide, pp.42-59, 1827.
DOI : 10.1017/CBO9780511702662.007

. Chekkal, Vibro-Acoustic Properties of Auxetic Open Cell Foam: Model and Experimental Results, Acta Acustica united with Acustica, vol.96, issue.2, pp.266-274, 2010.
DOI : 10.3813/AAA.918276

L. Chen, C. P. Chen, and R. S. Lakes, Micromechanical Analysis of Dynamic Behavior of Conventional and Negative Poisson???s Ratio Foams, Journal of Engineering Materials and Technology, vol.118, issue.3, pp.285-288, 1996.
DOI : 10.1115/1.2806807

. Choi, . Lakes, J. B. Choi, and R. S. Lakes, Design of a Fastener Based on Negative Poisson's Ratio Foam, Cellular Polymers, vol.1068, issue.3, pp.205-212, 1991.

. References, . Choi, . Lakes, J. B. Choi, and R. S. Lakes, Fracture toughness of re-entrant foam materials with a negative Poisson's ratio: experiment and analysis, International Journal of Fracture, vol.8068, pp.73-83, 1996.

. Courtois, Mechanical Properties of Monofilament Entangled Materials, of Conference Proceedings of the Society for Experimental Mechanics Series, pp.33-38, 2011.
DOI : 10.1002/adem.201100356
URL : https://hal.archives-ouvertes.fr/hal-00781282

D. R. Cox, Some Statistical Methods Connected with Series of Events, Journal of the Royal Statistical Society, vol.17, issue.2, pp.129-164, 0194.

. Delisée, Morphological Characterization and Porosity, 3D of Cellulosic Fibrous Materials. Comptes-Rendus de l'Académie des Sciences -Serie IIb : Mécanique, pp.179-185, 2001.

F. Deshpande, V. S. Deshpande, and N. A. Fleck, Isotropic constitutive models for metallic foams, Journal of the Mechanics and Physics of Solids, vol.48, issue.6-7, pp.1253-1283, 2000.
DOI : 10.1016/S0022-5096(99)00082-4
URL : http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.463.1283

P. Di and F. Paola, Modélisation multi-échelles du comportement thermoélastique de composites à particules sphériques, Thèse de Doctorat, 2010.

. Dirrenberger, Elastoplasticity of auxetic materials, Computational Materials Science, vol.64, issue.119, pp.57-61, 2012.
DOI : 10.1016/j.commatsci.2012.03.036
URL : https://hal.archives-ouvertes.fr/hal-00732417

. Dirrenberger, Effective elastic properties of auxetic microstructures: anisotropy and structural applications, International Journal of Mechanics and Materials in Design, vol.46, issue.7, pp.21-33, 2013.
DOI : 10.1007/s10999-012-9192-8
URL : https://hal.archives-ouvertes.fr/hal-00790180

. Dirrenberger, Homogenization of periodic auxetic materials, 11th International Conference on the Mechanical Behavior of Materials, pp.1847-1852, 2011.
DOI : 10.1016/j.proeng.2011.04.307
URL : https://hal.archives-ouvertes.fr/hal-00607077

H. Doyoyo, M. Doyoyo, and J. W. Hu, Plastic failure analysis of an auxetic foam or inverted strut lattice under longitudinal and shear loads, Journal of the Mechanics and Physics of Solids, vol.54, issue.7, pp.1479-1492, 2006.
DOI : 10.1016/j.jmps.2005.12.007

W. Drugan, W. J. Drugan, and J. R. Willis, A micromechanics-based nonlocal constitutive equation and estimates of representative volume element size for elastic composites, Journal of the Mechanics and Physics of Solids, vol.44, issue.4, pp.497-524, 1996.
DOI : 10.1016/0022-5096(96)00007-5

A. Einstein, Eine neue Bestimmung der Moleküldimensionen, References Annalen der Physik, vol.32438, issue.2, pp.289-306, 1906.

D. Embury and O. Bouaziz, Steel-Based Composites: Driving Forces and Classifications, Annual Review of Materials Research, vol.40, issue.1, pp.213-241, 2010.
DOI : 10.1146/annurev-matsci-070909-104438
URL : https://hal.archives-ouvertes.fr/hal-00523239

. Escoda, Estimation of local stresses and elastic properties of a mortar sample by FFT computation of fields on a 3D image, Cement and Concrete Research, vol.41, issue.5, pp.542-556, 2011.
DOI : 10.1016/j.cemconres.2011.02.003
URL : https://hal.archives-ouvertes.fr/hal-00553658

J. D. Eshelby, The Determination of the Elastic Field of an Ellipsoidal Inclusion, and Related Problems, Proceedings of the Royal Society of London. Series A, Mathematical and Physical Sciences, vol.24138, pp.376-396, 1957.

K. E. Evans, The design of doubly curved sandwich panels with honeycomb cores, Composite Structures, vol.17, issue.2, pp.95-111, 1991.
DOI : 10.1016/0263-8223(91)90064-6

. Evans, Molecular network design, Nature, vol.353, issue.6340, p.124, 1991.
DOI : 10.1038/353124a0

. Forest, Continuum modeling of strain localization phenomena in metallic foams, Journal of Materials Science, vol.40, issue.22, pp.5903-5910, 2005.
DOI : 10.1007/s10853-005-5041-6
URL : https://hal.archives-ouvertes.fr/hal-00153590

T. Forest, S. Forest, and D. Trinh, Generalized continua and nonhomogeneous boundary conditions in homogenisation methods, Zeitschrift für angewandte Mathematik und Mechanik, pp.90-109, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00585332

. Fourier and J. Fourier, Théorie analytique de la chaleur, Firmin Didot, vol.11, 1822.
DOI : 10.1017/CBO9780511693229
URL : http://www.mdz-nbn-resolving.de/urn/resolver.pl?urn=urn:nbn:de:bvb:12-bsb10058361-6

A. J. Freeman, Materials by design and the exciting role of quantum computation/simulation, Journal of Computational and Applied Mathematics, vol.149, issue.1, pp.27-56, 2002.
DOI : 10.1016/S0377-0427(02)00519-8

P. J. Frey, YAMS: A fully automatic adaptive isotropic surface remeshing procedure, p.78153, 2001.
URL : https://hal.archives-ouvertes.fr/inria-00069922

B. G. Galerkin, Series solution of some problems of elastic equilibrium of rods and plates. Wjestnik Ingenerow Petrograd, pp.897-908, 1915.

. References and . Gaspar, Novel honeycombs with auxetic behaviour, Acta Materialia, vol.5368, pp.2439-2445, 2005.

. Gitman, Representative volume: Existence and size determination, Engineering Fracture Mechanics, vol.74, issue.16, pp.2518-2534, 2007.
DOI : 10.1016/j.engfracmech.2006.12.021

R. J. Green, A plasticity theory for porous solids, International Journal of Mechanical Sciences, vol.14, issue.4, pp.215-224, 1972.
DOI : 10.1016/0020-7403(72)90063-X

S. Hashin, Z. Hashin, and S. Shtrikman, A Variational Approach to the Theory of the Effective Magnetic Permeability of Multiphase Materials, Journal of Applied Physics, vol.33, issue.10, pp.3125-3131, 1962.
DOI : 10.1063/1.1728579

S. Hashin, Z. Hashin, and S. Shtrikman, A variational approach to the theory of the elastic behaviour of polycrystals, Journal of the Mechanics and Physics of Solids, vol.10, issue.4, pp.343-352, 1962.
DOI : 10.1016/0022-5096(62)90005-4

S. Hashin, Z. Hashin, and S. Shtrikman, A variational approach to the theory of the elastic behaviour of multiphase materials, Journal of the Mechanics and Physics of Solids, vol.11, issue.2, pp.127-140, 1963.
DOI : 10.1016/0022-5096(63)90060-7

. Hatami-marbini, . Picu, H. Hatami-marbini, and R. C. Picu, Heterogeneous long-range correlated deformation of semiflexible random fiber networks, Physical Review E, vol.80, issue.4, 2009.
DOI : 10.1103/PhysRevE.80.046703

A. Hazanov, S. Hazanov, and M. Amieur, On overall properties of elastic heterogeneous bodies smaller than the representative volume, International Journal of Engineering Science, vol.33, issue.9, pp.1289-1301, 1995.
DOI : 10.1016/0020-7225(94)00129-8

H. Hazanov, S. Hazanov, and C. Huet, Order relationships for boundary conditions effect in heterogeneous bodies smaller than the representative volume, Journal of the Mechanics and Physics of Solids, vol.42, issue.12, pp.1995-2011, 1994.
DOI : 10.1016/0022-5096(94)90022-1

C. T. Herakovich, Composite Laminates with Negative Throughthe-Thickness Poisson's Ratios, Journal of Composite Materials, vol.1868, issue.5, pp.447-455, 1984.

R. Hill, The Mathematical Theory of Plasticity, 1950.

. Hooke and R. Hooke, De Potentia Restitutiva, 1678.

B. Huang, X. Huang, and S. Blackburn, Developing a New Processing Route to Manufacture Honeycomb Ceramics with Negative Poisson's Ratio, Key Engineering Materials, vol.206, issue.213, pp.206-213, 2002.
DOI : 10.4028/www.scientific.net/KEM.206-213.201

. Hughes, Auxetic frameworks inspired by cubic crystals, International Journal of Solids and Structures, vol.47, issue.11-12, pp.1469-1476, 2010.
DOI : 10.1016/j.ijsolstr.2010.02.002

G. R. Irwin, Analysis of Stresses and Strains Near the End of a Crack Traversing a Plate, Journal of Applied Mechanics, vol.2468, pp.361-364, 1957.

A. Jean, Étude d'un élastomère chargé, de sa nanostructure à son macrocomportement, Thèse de Doctorat, pp.61-162, 2009.

E. Jean, A. Jean, and G. C. Engelmayr, Finite element analysis of an accordion-like honeycomb scaffold for cardiac tissue engineering, Journal of Biomechanics, vol.43, issue.15, pp.3035-3043, 2010.
DOI : 10.1016/j.jbiomech.2010.06.032

D. Jeulin, Modèles de Fonctions Aléatoires Multivariables, References Sciences de la Terre, vol.3060, issue.110, pp.225-256, 0198.

D. Jeulin, Modèles Morphologiques de Structures Aléatoires et de Changement d'Échelle, Thèse de Doctorat d'État, 0198.

D. Jeulin, Variance scaling of Boolean random varieties, pp.163-195, 0198.
URL : https://hal.archives-ouvertes.fr/hal-00618967

O. Jeulin, D. Jeulin, and M. Ostoja-starzewski, Mechanics of Random and Multiscale Microstructures. CISM Courses, p.57, 2001.

. Kanit, Determination of the size of the representative volume element for random composites: statistical and numerical approach, International Journal of Solids and Structures, vol.40, issue.13-14, pp.3647-3679, 2003.
DOI : 10.1016/S0020-7683(03)00143-4

. Kanit, Apparent and effective physical properties of heterogeneous materials: Representativity of samples of two materials from food industry, Computer Methods in Applied Mechanics and Engineering, vol.195, issue.33-36, pp.3960-3982, 2006.
DOI : 10.1016/j.cma.2005.07.022
URL : https://hal.archives-ouvertes.fr/hal-00139164

. Kolopp, Impact Testing of Composite Sandwich Structures for Aircraft Armor Applications, JNC 17 -17èmes Journées Nationales sur les Composites, pp.15-17, 2011.

R. S. Lakes, Foam Structures with a Negative Poisson's Ratio, Science, vol.235, issue.4792, pp.1038-1040, 1987.
DOI : 10.1126/science.235.4792.1038

R. S. Lakes, Deformation mechanisms in negative Poisson's ratio materials: structural aspects, Journal of Materials Science, vol.247, issue.9, pp.2287-2292, 1991.
DOI : 10.1007/BF01130170

R. S. Lakes, Materials with structural hierarchy, Nature, vol.361, issue.6412, pp.511-515, 1993.
DOI : 10.1038/361511a0

C. Lantuéjoul, Ergodicity and integral range, Journal of Microscopy, vol.280, issue.3, pp.387-403, 1991.
DOI : 10.1111/j.1365-2818.1991.tb03099.x

L. Laszczyk, Homogénéisation et optimisation topologique de panneaux architecturés, Thèse de Doctorat, 2011.

A. Lebée, Homogénéisation de plaques périodiques épaisses : application aux panneaux sandwichs à ame pliables en chevrons, Thèse de Doctorat, 2010.

R. A. Lebensohn, N-site modeling of a 3D viscoplastic polycrystal using Fast Fourier Transform, Acta Materialia, vol.49, issue.14, pp.2723-2737, 2001.
DOI : 10.1016/S1359-6454(01)00172-0

. Leite, Optimal design of a lightweight sandwich panel for mechanical and thermal properties, Proceedings of the Materials Science and Technology Conference, pp.7-11, 2012.

. Leite, Optimal Design of an Asymmetrical Sandwich Panel for Acoustical and Mechanical Properties, Volume 4: Advanced Manufacturing Processes; Biomedical Engineering; Multiscale Mechanics of Biological Tissues; Sciences, Engineering and Education; Multiphysics; Emerging Technologies for Inspection, pp.1-4, 2012.
DOI : 10.1115/ESDA2012-82504

. Lemaitre, J. Chaboche-]-lemaitre, and J. Chaboche, Mechanics of Solid Materials, 1994.

. Lewandowski, Development and Characterization of 3D Nonwoven Composites, Materials Science Forum, vol.714, pp.131-137, 2012.
DOI : 10.4028/www.scientific.net/MSF.714.131

B. Lipsett, A. W. Lipsett, and A. I. Beltzer, Reexamination of dynamic problems of elasticity for negative Poisson???s ratio, The Journal of the Acoustical Society of America, vol.84, issue.6, pp.2179-2186, 1988.
DOI : 10.1121/1.397064

K. Madi, Influence de la morphologie tridimensionnelle des phases sur le comportement mécanique de réfractaires électrofondus, Thèse de Doctorat, p.61, 2006.

. Madi, Finite element simulations of the deformation of fused-cast refractories based on X-ray computed tomography, Computational Materials Science, vol.39, issue.1, pp.224-229, 2007.
DOI : 10.1016/j.commatsci.2006.01.033
URL : https://hal.archives-ouvertes.fr/hal-00140558

. References and . Madi, Numerical study of creep in two-phase aggregates with a large rheology contrast: implications for the lower mantle, Earth and Planetary Science Letters, vol.237, pp.1-2, 2005.

. Martin, The hexachiral prismatic wingbox concept, physica status solidi (b), vol.17, issue.3, pp.570-577, 2008.
DOI : 10.1002/pssb.200777709

G. Matheron, Éléments pour une Théorie des Milieux Poreux, 0197.

G. Matheron, Random Sets and Integral Geometry, J. Wiley, vol.57, 1975.

G. Matheron, Estimating and Choosing, 1989.
DOI : 10.1007/978-3-642-48817-7

J. C. Maxwell, Treatise on Electricity and Magnetism, 1873.
DOI : 10.1017/cbo9780511709333
URL : http://www.e-rara.ch/download/pdf/2506524?name=Vol.%25201

[. Garnett and J. C. , Colours in metal glasses and in metallic films, Philosophical Transactions of the Royal Society A, vol.20334, pp.385-420, 1904.

J. J. Mccoy, On the displacement field in an elastic medium with random variations of material properties, In : Recent Advances in Engineering Sciences, vol.546, pp.235-254, 1970.

. Mezeix, Mechanical behavior of entangled fibers and entangled cross-linked fibers during compression, Journal of Materials Science, vol.50, issue.22, pp.3652-3661, 2009.
DOI : 10.1007/s10853-009-3483-y

. Michel, Effective properties of composite materials with periodic microstructure: a computational approach, Computer Methods in Applied Mechanics and Engineering, vol.172, issue.1-4, pp.109-143, 1999.
DOI : 10.1016/S0045-7825(98)00227-8

. Michel, A computational scheme for linear and non???linear composites with arbitrary phase contrast, International Journal for Numerical Methods in Engineering, vol.58, issue.12, pp.139-158, 2001.
DOI : 10.1002/nme.275

R. E. Miller, A continuum plasticity model for the constitutive and indentation behaviour of foamed metals, International Journal of Mechanical Sciences, vol.42, issue.4, pp.729-754, 2000.
DOI : 10.1016/S0020-7403(99)00021-1

G. W. Milton, Composite Materials with Poisson's Ratios Close to -1 The Theory of Composites, Journal of the Mechanics and Physics of Solids Cambridge Monographs on Applied and Computational Mathematics, vol.4033, issue.5, p.47, 1992.

. Milton, G. W. Phan-thien-]-milton, and N. Phan-thien, New Bounds on Effective Elastic Moduli of Two-Component Materials, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.380, issue.1779, pp.305-331, 1982.
DOI : 10.1098/rspa.1982.0044

. Mitschke, Finding Auxetic Frameworks in Periodic Tessellations, Advanced Materials, vol.5, issue.22-23, pp.2669-2674, 2011.
DOI : 10.1002/adma.201100268

. Mori, . Tanaka, T. Mori, and K. Tanaka, Average stress in matrix and average elastic energy of materials with misfitting inclusions, Acta Metallurgica, vol.21, issue.5, pp.571-574, 1973.
DOI : 10.1016/0001-6160(73)90064-3

S. Moulinec, H. Moulinec, and P. Suquet, A fast numerical method for computing the linear and nonlinear mechanical properties of composites. Comptes-Rendus de l, Académie des Sciences, vol.318119, issue.166, pp.1417-1423, 1994.

S. Moulinec, H. Moulinec, and P. Suquet, A numerical method for computing the overall response of nonlinear composites with complex microstructure, Computer Methods in Applied Mechanics and Engineering, vol.157, issue.1-2, pp.69-94, 1998.
DOI : 10.1016/S0045-7825(97)00218-1
URL : https://hal.archives-ouvertes.fr/hal-01282728

T. Mura, Micromechanics of defects in solids, 1987.

G. B. Olson, Beyond discovery: design for a new material world, Calphad, vol.25, issue.2, pp.175-190, 2001.
DOI : 10.1016/S0364-5916(01)00041-4

. Ostoja-starzewski, Microstructural Randomness Versus Representative Volume Element in Thermomechanics, Journal of Applied Mechanics, vol.69, issue.1, pp.25-35, 2002.
DOI : 10.1115/1.1410366

. Oumarou, Etude statistique multiéchelle du comportement élastique et thermique d'un composite thermoplastique, Revue des composites et des matériaux avancés, pp.221-25461, 2011.
DOI : 10.3166/rcma.21.221-254

. Oumarou, Multi-Scale Statistical Approach of the Elastic and Thermal Behavior of a Thermoplastic Polyamid-Glass Fiber Composite, pp.484-506, 2012.
URL : https://hal.archives-ouvertes.fr/hal-00722633

. Pascal, Analyse de VER : une idée pour s'affranchir des effets de bords In : Journées thématiques MECAMAT organisées par les Groupes de Travail 'Approches probabilistes en mécanique des milieux hétérogènes -Rhéologie des matériaux hétérogènes -Traitements thermomécaniques, pp.23-24, 2010.

. References and . Pelissou, Determination of the size of the representative volume element for random quasi-brittle composites, International Journal of Solids and Structures, vol.46109, pp.2842-2855, 2009.

. Peyrega, 3D MORPHOLOGICAL MODELLING OF A RANDOM FIBROUS NETWORK, Image Analysis & Stereology, vol.28, issue.3, pp.129-141, 2009.
DOI : 10.5566/ias.v28.p129-141
URL : https://hal.archives-ouvertes.fr/hal-00906502

R. C. Picu, Mechanics of random fiber networks???a review, Soft Matter, vol.306, issue.15, pp.6768-6785, 2011.
DOI : 10.1039/c1sm05022b

H. Picu, R. C. Picu, and H. Hatami-marbini, Long-range correlations of elastic fields in semi-flexible fiber networks, Computational Mechanics, vol.37, issue.4, pp.635-640, 2010.
DOI : 10.1007/s00466-010-0500-6

S. Poisson, Recherches sur la probabilité des jugements en matière criminelle et en matière civile, 1837.

W. Prager, Recent Developments in the Mathematical Theory of Plasticity, Journal of Applied Physics, vol.20, issue.3, pp.235-241, 1949.
DOI : 10.1063/1.1698348

D. Prall and R. S. Lakes, Properties of a chiral honeycomb with a poisson's ratio of ??? 1, International Journal of Mechanical Sciences, vol.39, issue.3, pp.305-314, 1997.
DOI : 10.1016/S0020-7403(96)00025-2

A. Reuss, Berechnung der Fließgrenze von Mischkristallen auf Grund der Plastizitätsbedingung für Einkristalle, Zeitschrift für angewandte Mathematik und Mechanik, pp.49-58, 1929.
DOI : 10.1002/zamm.19290090104

. Rothenburg, Microstructure of isotropic materials with negative Poisson's ratio, Nature, vol.354, issue.6353, pp.470-472, 1991.
DOI : 10.1038/354470a0

K. Sab, On the homogenization and the simulation of random materials, European Journal of Mechanics, A/Solids, vol.1117, issue.18, pp.585-607, 1992.

N. Sab, K. Sab, and B. Nedjar, Periodization of random media and representative volume element size for linear composites, Comptes-Rendus de l'Académie des Sciences -Serie IIb : Mécanique, pp.187-195, 2005.
DOI : 10.1016/j.crme.2004.10.003
URL : https://hal.archives-ouvertes.fr/hal-00121487

. Salmi, Apparent and effective mechanical properties of linear matrix-inclusion random composites: Improved bounds for the effective behavior, International Journal of Solids and Structures, vol.49, issue.10, pp.1195-1211, 2012.
DOI : 10.1016/j.ijsolstr.2012.01.018
URL : https://hal.archives-ouvertes.fr/hal-01157362

. Salmi, Various estimates of Representative Volume Element sizes based on a statistical analysis of the apparent behavior of random linear composites, Comptes-Rendus de l'Académie des Sciences -Serie IIb : Mécanique, pp.230-246, 2012.
DOI : 10.1016/j.crme.2012.02.007
URL : https://hal.archives-ouvertes.fr/hal-01157361

R. Sanchez-palencia and E. , Comportements local et macroscopique d'un type de milieux physiques heterogenes, International Journal of Engineering Science, vol.12, issue.4, pp.331-351, 1974.
DOI : 10.1016/0020-7225(74)90062-7

Z. Sanchez-palencia, E. Sanchez-palencia, and A. Zaoui, Homogenization techniques for composite media, Lecture Notes in Physics, vol.272, p.47, 1987.
DOI : 10.1007/3-540-17616-0

. Scarpa, Dynamic crushing of auxetic open-cell polyurethane foam, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, vol.10, issue.12, pp.1153-1156, 2002.
DOI : 10.1243/095440602321029382

. Schaedler, Ultralight Metallic Microlattices, Science, vol.334, issue.6058, pp.962-965, 2011.
DOI : 10.1126/science.1211649

. Schladitz, Design of acoustic trim based on geometric modeling and flow simulation for nonwoven, Computational Materials Science, vol.38109, issue.110, pp.56-66, 2006.

. Schroeder, The Visualization Toolkit An Object-Oriented Approach To 3D Graphics, 2006.

P. Soare, M. A. Soare, and R. C. Picu, An approach to solving mechanics problems for materials with multiscale self-similar microstructure, International Journal of Solids and Structures, vol.44, issue.24, pp.7877-7890, 2007.
DOI : 10.1016/j.ijsolstr.2007.05.015

A. Spadoni, Application of Chiral Cellular Materials for the Design of Innovative Components, Thèse de Doctorat, 2008.

. Spadoni, Phononic properties of hexagonal chiral lattices, Wave Motion, vol.46, issue.7, pp.435-450, 2009.
DOI : 10.1016/j.wavemoti.2009.04.002

G. Timoshenko, S. Timoshenko, and J. N. Goodier, Theory of elasticity. Engineering Societies Monographs, 1951.

S. Torquato, Random Heterogeneous Materials, p.47, 2001.
DOI : 10.1007/978-1-4757-6355-3

D. Trinh, Méthodes d'homogénéisation d'ordre supérieur pour les matériaux architecturés, Thèse de Doctorat, 2011.

. Turcaud, An excursion into the design space of biomimetic architectured biphasic actuators, International Journal of Materials Research, vol.102, issue.6, pp.607-612, 2011.
DOI : 10.3139/146.110517
URL : https://hal.archives-ouvertes.fr/hal-00693776

M. Von, Mechanik der festen Körper im plastisch deformablen Zustand, pp.582-592, 1913.

M. Von, Mechanik der plastischen Formänderung von Kristallen, Zeitschrift für angewandte Mathematik und Mechanik, pp.161-185, 1928.

O. Wiener, Die Theorie des Mischkörpers für das Feld der stationären Strömung. 1. Abhandlung: Die Mittelwertsätze für Kraft, Polarisation und Energie, Abhandlungen der Königlich Sächsischen Gesellschaft der Wissenschaften, vol.3235, issue.6, 1912.

F. Willot and D. Jeulin, Elastic behavior of composites containing Boolean random sets of inhomogeneities, International Journal of Engineering Science, vol.47, issue.2, pp.313-324, 2009.
DOI : 10.1016/j.ijengsci.2008.09.016
URL : https://hal.archives-ouvertes.fr/hal-00426398

. Willot, Localization of elastic deformation in strongly anisotropic, porous, linear materials with periodic microstructures: Exact solutions and dilute expansions, Journal of the Mechanics and Physics of Solids, vol.56, issue.4, pp.1245-1268, 2008.
DOI : 10.1016/j.jmps.2007.10.002
URL : https://hal.archives-ouvertes.fr/cea-00412543