.. Du-problème, Identification, Etape, vol.1, p.162

.. Du-modèle, Validation, Etape, vol.5, p.165

B. Akesson, Plate buckling in bridges and other structures. Taylor and Francis Group, Akesson. Understanding bridge collapses, 2007.

D. M. Allen, The prediction sum of squares as a criterion for selecting predictor variables. Rapport technique, 1971.

T. T. Allen, M. A. Bernshteyn, and K. Kabiri-bamoradin, Constructing metamodels for computer experiments, Journal of Quality Technology, vol.35, pp.264-274, 2003.

M. Amabili, Nonlinear Vibrations and Stability of Shells and Plates, 2008.
DOI : 10.1017/CBO9780511619694

I. André, H. Degée, V. De-ville-de-goyet, and E. R. Maquoi, Effect of initial imperfections in numerical simulations of collapse behaviour of stiffened plates under compression, Proceedings of the Third European Conference on Steel Structures, pp.503-512, 2002.

E. Armentani, C. Calí, G. Cricrí, F. Caputo, and E. R. Esposito, Numerical solution techniques for structural instability problems, Journal of Achievements in Materials and Manufacturing Engineering, vol.19, issue.1, 2006.

V. O. Balabanov, G. Venter-45th, and A. Structures, Response Surface Optimization with Discrete Variables, 45th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics & Materials Conference, 2004.
DOI : 10.2514/6.2004-1872

I. Balaz and N. W. Murray, A comparison of some design rules with results from tests on longitudinally stiffened deck plates of box-girders, Journal of Constructional Steel Research, vol.23, pp.1-331, 1992.

J. F. Barthelemy and R. T. Haftka, Approximation concepts for optimum structural design : A review. Structural and Multidisciplinary Optimization, pp.129-144, 1993.

S. S. Batdorf, M. Schildcrout, and E. M. Stein, Critical combinations of shear and longitudinal direct stress for long plates with transverse curvature. National Advisory Committee for Aeronautics, p.1347, 1947.

S. Batdorf, A simplified method of elastic-stability analysis for thin cylindrical shells. Rapport technique, National Advisory Committee for Aeronautics, p.847, 1947.

S. S. Batdorf and M. Schildcrout, Critical axial-compressive stress of a curved rectangular panel with a central chordwise stiffener, 1948.

H. Becker, Handbook of structural stability. Part VI : Strength of stiffened curved plates ans shells. Rapport technique, 1958.

O. Bedair, Analysis and Limit State Design of Stiffened Plates and Shells: A World View, Applied Mechanics Reviews, vol.62, issue.2, pp.20801-20817, 2009.
DOI : 10.1115/1.3077137

O. Bedair and A. Sherbourne, On the stability of plates under combined compression and in-plane bending. Computers and structures, pp.1453-1464, 1994.

G. Blatman, Adaptive sparse polynomial chaos expansions for uncertainty propagation and sensitivity analysis, 2009.
URL : https://hal.archives-ouvertes.fr/tel-00440197

G. Blatman, B. Sudret, and E. M. Berveiller, Quasi random numbers in stochastic finite element analysis, M??canique & Industries, vol.8, issue.3, pp.289-297, 2007.
DOI : 10.1051/meca:2007051

D. L. Block, M. F. Card, and M. M. Mikulas, Buckling of eccentrically stiffened orthotropic cylinders. National Advisory Committee for Aeronautics, p.2960, 1965.

M. A. Bonello, M. K. Chryssanthopoulos, and P. J. Dowling, Ultimate strength design of stiffened plates under axial compression and bending. Marine structures, pp.5-6, 1993.

K. P. Bowman, J. Sacks, and Y. F. Chang, Design and Analysis of Numerical Experiments, Journal of the Atmospheric Sciences, vol.50, issue.9, pp.1267-1267, 1993.
DOI : 10.1175/1520-0469(1993)050<1267:DAAONE>2.0.CO;2

B. T. Braun, Stability of steel plates under combined loading, 2010.

E. F. Bruhn, Analysis and design of flight vehicle strutures, 1973.

D. Bushnell and W. D. Bushnell, Approximate method for the optimum design of ring and stringer stiffened cylindrical panels and shells with local, inter-ring, and general buckling modal imperfections, Computers & Structures, vol.59, issue.3, pp.489-527, 1996.
DOI : 10.1016/0045-7949(95)00264-2

J. A. Calgaro, Introduction aux Eurocodes : sécurité des constructions et bases de la théorie de la fiabilité, 1996.

C. A. Carlsen, A parametric study of collapse of stiffened plates in compression. The structural engineer, pp.33-40, 1980.

E. Cerezci and F. Gokpinar, A comparison of three linear programming models for computing least absolute value estimates, Hacettepe Journal of Mathematics and Statistics, vol.34, pp.95-102, 2005.

S. J. Chen and K. C. Yang, Inelastic behavior of orthotropic steel deck stiffened by ushaped stiffeners. Thin-walled structures, pp.537-553, 2002.

S. R. Cho, H. Z. Park, H. S. Kim, and J. S. Seo, Experimental and numerical investigations on the ultimate strength of curved stiffened plates, Proceeding 10th International Symposium on Practical Design of Ships and Other Floating Structures, 2007.

B. H. Choi, M. Hwang, T. Yoon, and C. H. Yoo, Experimental study of inelastic buckling strength and stiffness requirements for longitudinally stiffened panels, Engineering Structures, vol.31, issue.5, pp.311141-1153, 2009.
DOI : 10.1016/j.engstruct.2009.01.010

J. Cohen, P. Cohen, S. G. West, and L. S. Aiken, Applied Multiple Regression/Correlation Analysis for the Behavioral Sciences, 2003.

P. A. Cornillon and E. Matzner-lober, Régression : théorie et applications, 2006.

H. L. Cox and W. J. Clenshaw, Compression tests on curved plates of thin sheet duralumin. HM Stationery Off, 1941.

H. Crate and L. Levin, Data on buckling strength of curved sheet in compression, 1943.

L. Davaine, Formulations de la résistance au lancement d'une âme métallique de pont raidie longitudinalement, 2005.

V. De-ville-de-goyet, R. Maquoi, . Fr, E. I. Bachy, and . André, Ultimate load of stiffened compressed plates : Effects of some parameters and discussion concerning the ec3 rules, Proceedings of the Third European Conference on Steel Structures, pp.591-600, 2002.

M. M. Domb and B. R. Leigh, Refined design curves for compressive buckling of curved panels using nonlinear finite element analysis, 19th AIAA Applied Aerodynamics Conference, 2001.
DOI : 10.2514/6.2001-1328

C. Douthe, Etude de structures élancées précontraintes en matériaux composites : application à la comception des gridshells, 2007.

P. J. Dowling, Strength of steel box-girder bridges, Journal of the Structural Division, vol.101, 1975.

P. Dubas and E. Gehri, Behaviour and design of steel plated structures, Applied Statics and Steel Structures, 1986.

V. Dubourg, J. M. Bourinet, and E. B. Sudret, Analyse fiabiliste du flambage des coques avec prise en compte du caractère aléatoire et de la variabilité spatiale des défauts de forme et d'épaisseur, et des propriétés matériaux, 2007.

J. B. Dwight and G. H. Little, Stiffened steel compression flanges -A simpler approach. The structural engineer, pp.501-509, 1976.

C. Featherston, Imperfection sensitivity of curved panels under combined compression and shear, International Journal of Non-Linear Mechanics, vol.38, issue.2, pp.225-238, 2003.
DOI : 10.1016/S0020-7462(01)00058-0

R. A. Fisher, Design of Experiments, BMJ, vol.1, issue.3923, 1935.
DOI : 10.1136/bmj.1.3923.554-a

B. W. Forde and S. F. Stiemer, Improved arc length orthogonality methods for nonlinear finite element analysis, Computers & Structures, vol.27, issue.5, pp.625-630, 1987.
DOI : 10.1016/0045-7949(87)90078-2

P. Frieze, Assessment of ABS SVR results using test database. Rapport technique, ABS, 2002.

P. A. Frieze and P. J. Dowling, Interactive buckling analysis of box sections using dynamic relaxation, Computers & Structures, vol.9, issue.5, pp.431-439, 1978.
DOI : 10.1016/0045-7949(78)90039-1

Y. Galéa, Voilement des plaques rectangulaires raidies : utilisation des abaques de klöppel, scheer et möller. Revue Construction Métallique, pp.99-107, 1985.

Y. Galéa and P. O. Martin, Contraintes critiques de voilement de plaques rectangulaires. présentation du logiciel ebplate. Revue Construction Métallique, pp.33-74, 2007.

Y. Galéa and P. O. Martin, Application de l'en 1993-1-5 aux plaques raidies longitudinalement : proposition d'une méthode de calcul de la contrainte critique. Revue Construction métallique, pp.3-22, 2008.

Y. Galéa and P. O. Martin, Longitudinally stiffened plates in Eurocode 3: Calculation of the global critical buckling stress, Journal of Constructional Steel Research, vol.66, issue.11, pp.1345-1353, 2010.
DOI : 10.1016/j.jcsr.2010.05.001

H. W. Gall, Compressive strength of stiffened sheets of aluminum alloy, 1930.

G. Gerard and H. Becker, Handbook of structural stability. Part III : Buckling of curved plates and shells. Rapport technique, 1957.

K. Ghavami, Experimental study of stiffened plates in compression up to collapse, Journal of Constructional Steel Research, vol.28, issue.2, pp.197-221, 1994.
DOI : 10.1016/0143-974X(94)90043-4

G. Y. Grondin, A. E. Elwi, and J. J. Cheng, Buckling of stiffened steel plates???a parametric study, Journal of Constructional Steel Research, vol.50, issue.2, pp.151-175, 1999.
DOI : 10.1016/S0143-974X(98)00242-9

X. L. Guan and R. E. Melchers, Effect of response surface parameter variation on structural reliability estimates. Structural safety, pp.429-444, 2001.

C. , G. Soares, and J. Gordo, Design methods for stiffened plates under predominantly uniaxial compression. Marine structures, pp.465-497, 1997.

P. W. Holland and R. E. Welsch, Robust regression using iteratively reweighted least-squares, Communications in Statistics - Theory and Methods, vol.3, issue.9, pp.813-827, 1977.
DOI : 10.1214/aos/1176342503

R. Iman and J. C. Helton, An Investigation of Uncertainty and Sensitivity Analysis Techniques for Computer Models, Risk Analysis, vol.83, issue.2, pp.71-90, 1988.
DOI : 10.1063/1.445400

K. V. Jackson and A. H. Hall, Curved plates in compression, National Research Council, 1947.

T. Jacques, R. Maquoi, and E. G. Fonder, Buckling of unstiffened compression curved plates, Journal of Constructional Steel Research, vol.3, issue.1, pp.28-34, 1983.
DOI : 10.1016/0143-974X(83)90014-7

K. Jarmai, Optimum design of stiffened plates, Journal of Computational and Applied Mechanics, vol.1, issue.1, pp.49-69, 2000.

P. Jetteur, A new design method for stiffened compression flanges of box girders. Thin-walled structures, pp.189-210, 1983.

B. Johansson, R. Maquoi, and E. G. Sedlacek, New design rules for plated structures in Eurocode 3, Journal of Constructional Steel Research, vol.57, issue.3, pp.279-311, 2001.
DOI : 10.1016/S0143-974X(00)00020-1

B. Johansson, R. Maquoi, G. Sedlacek, C. Müller, and E. D. Beg, Commentary and worked examples to en 1993-1-5 "plated structural elements, Rapport technique, JRC Scientific and Technical Reports, 2007.

B. Jones and I. Mathworks, MATLAB : Statistics Toolbox User's Guide, MathWorks, 1993.

R. M. Jones, Buckling of bars, plates, and shells, Bull Ridge Corporation, 2006.

K. Jorabchi and K. Suresh, A robust continuation method to pass limit-point instability. Finite elements in analysis and design, pp.1253-1261, 2011.

A. Jourdan, Planification d'expériences numériques, 2005.

K. Kelley and S. E. Maxwell, Sample Size for Multiple Regression: Obtaining Regression Coefficients That Are Accurate, Not Simply Significant., Psychological Methods, vol.8, issue.3, p.305, 2003.
DOI : 10.1037/1082-989X.8.3.305

M. R. Khedmati and P. Edalat, A numerical investigation into the effects of parabolic curvature on the buckling strength and behaviour of stiffened plates under in-plane compression, Latin American Journal of Solids and Structures, vol.7, issue.3, p.249, 2010.
DOI : 10.1590/S1679-78252010000300002

J. P. Kleijnen, Design and analysis of computational experiments : Overview. Experimental Methods for the Analysis of Optimization Algorithms, p.51, 2010.

I. Krykova, Evaluating of path-dependent securities with low discrepancy methods, 2003.

A. D. Lanzo, A koiter's perturbation strategy for the imperfection sensitivity analyssi of thin-walled structures with residual stresses. Thin-walled structures, pp.77-95, 2000.

E. E. Lundquist, Comparison of three methods for calculating the compressive strength of flat and slightly curved sheet and stiffener combinations. Rapport technique , National Advisory Committee for Aeronautics, 1933.

E. E. Lundquist, E. Z. Stowell, and E. H. Schuette, Principles of moment distribution applied to stability of structures composed of bars or plates, 1945.

Y. Maeno, H. Yamaguchi, Y. Fujii, and E. T. Yao, Buckling -plastic collapse behaviour and strength of bilge circle and its contribution to ultimate longitudinal strength of ship's hull girder, Proceeding of the fourteenth International Offshore and Polar Engineering Conference, pp.296-302, 2004.

R. Maquoi, Instabilités structurales : Principes généraux, 2009.

R. Maquoi, V. De-ville-de, and . Goyet, Some tracks for possible improvement and implementation of Eurocode 3 (M??glichkeiten zur Verbesserung und Vollendung des Eurocodes 3), Stahlbau, vol.68, issue.11, pp.880-888, 1999.
DOI : 10.1002/stab.199903130

R. Maquoi and C. Massonnet, Théorie non-linéaire de la résistance postcritique des grandes poutres en caisson raidies, pp.3191-140, 1971.

R. Maquoi and J. , Mise en équation des nouvelles courbes Europeennes de flambement. Revue Construction Métalique, pp.17-30, 1978.

R. Maquoi and M. Skaloud, Stability of plates and plated structures, Journal of Constructional Steel Research, vol.55, issue.1-3, pp.45-68, 2000.
DOI : 10.1016/S0143-974X(99)00077-2

T. Maro?-sevi´csevi´c, A choice of norm in discrete approximation, Mathematical Communications, vol.1, issue.2, pp.147-153, 1996.

P. O. Martin, H. Degee, and E. J. Naumes, Proposition d'une formulation améliorée pour le calcul de la partie efficace d'une section raidie longitudinalement. Construction métallique, pp.29-46, 2009.

P. O. Martin and Y. Galéa, Effective widths of stiffeners, 2007.

S. E. Maxwell, Sample size and multiple regression analysis., Psychological Methods, vol.5, issue.4, pp.434-458, 2000.
DOI : 10.1037/1082-989X.5.4.434

C. D. Miller, Buckling stress of ring and stringer stiffended cylindrical shells under axial compressive load. Rapport technique, Chicago Iron and Bridge Company, 1977.

D. C. Montgomery, Design and analysis of experiments, 2008.

N. W. Murray, Analysis and design of stiffened plates for collapse load. The structural engineer, pp.153-158, 1975.

J. S. Park, M. Fujikubo, K. Iijima, and E. T. Yao, Prediction of the secondary buckling strength and ultimate strength of cylindrically curved plate under axial compression, 2009.

J. S. Park, K. Iijima, and E. T. Yao, Characteristics of buckling and ultimate strength and collapse behaviour of cylindrically curved plates subjected to axial compression

J. S. Park, K. Yumura, S. Katsura, K. Iilima, and E. T. Yao, Buckling and post-buckling behaviour of cylindrically curved plates under axial compression, 2006.

J. S. Park, K. Iijima, and E. T. Yao, Estimation of buckling and collapse behaviours of stiffened curved plates under compressive load, International Society of Offshore and Polar Engineers, 2008.

J. S. Park, K. Iijima, and E. T. Yao, Buckling/ultimate strength and progressive collapse behaviour comparison of unstiffened and stiffened curved plates subjected to axial compression, International Journal of Computer Applications in Technology, vol.41, issue.1/2, pp.60-72, 2011.
DOI : 10.1504/IJCAT.2011.042233

J. P. Peterson and R. O. Whitley, Local buckling of longitudinally stiffened curved plates, 1961.

G. G. Pope, On the axial compression of long, slightly curved panel. Bristish aeronautical research council, p.3392, 1963.

N. T. Quan, The prediction sum of squares as a general measure for regression diagnostics, Journal of Business and Economic Statistics, pp.501-504, 1988.

M. R. Rajashekhar and B. R. Ellingwood, A new look at the response surface approach for reliability analysis. Structural safety, pp.205-220, 1993.

R. S. Ramaswamy, Optimal design of stiffened plates, 1999.

W. Ramberg, S. Levy, and K. L. Fienup, Effect of curvature on strength of axially loaded sheet-stringer panels. Rapport technique, NACA-Technical note 944, 1944.

S. Redshaw, The elastic instability of a thin curved panel subjected to an axial thrust, its axial and circumferential edges being simply supported, Bristish aeronautical research council, p.1565, 1933.

E. Riks, The Application of Newton???s Method to the Problem of Elastic Stability, Journal of Applied Mechanics, vol.39, issue.4, p.1060, 1972.
DOI : 10.1115/1.3422829

J. Rondal and R. Maquoi, Formulation d'Ayrton-Perry pour le flambement des barres métalliques. Revue Construction Métalique, pp.41-53, 1979.

J. M. Rotter, Shell structures : the new european standard and current research needs. Thin-walled structures, pp.3-23, 1998.

J. M. Rotter, Proposal for generalisation of the elastic-plastic buckling interaction rule in Eurocode 3-Part 1.6. Rapport technique, 1999.

J. M. Rotter, Shell buckling and collapse analysis for structural design. Solid mechanics and its applications, pp.355-378, 2002.

J. M. Rotter, The practical design of shell structures exploiting different methods of analysis. Shell Structures : Theory and Applications, pp.71-86, 2005.

V. Rousson and N. F. Gosoniu, An -square coefficient based on final prediction error, Statistical Methodology, vol.4, issue.3, pp.331-340, 2007.
DOI : 10.1016/j.stamet.2006.11.004

W. J. Roux, N. Stander, and R. T. Haftka, Response surface approximations for structural optimization, International Journal for Numerical Methods in Engineering, vol.24, issue.3, pp.517-534, 1998.
DOI : 10.1002/(SICI)1097-0207(19980615)42:3<517::AID-NME370>3.0.CO;2-L

R. Roy, S. Hinduja, and E. R. Teti, Recent advances in engineering design optimisation: Challenges and future trends, CIRP Annals - Manufacturing Technology, vol.57, issue.2, pp.697-715, 2008.
DOI : 10.1016/j.cirp.2008.09.007

J. Sacks, S. B. Schiller, and W. J. Welch, Designs for Computer Experiments, Technometrics, vol.15, issue.18, pp.41-47, 1989.
DOI : 10.1080/00401706.1989.10488474

J. Sacks, W. J. Welch, T. J. Mitchell, and H. P. Wynn, Design and Analysis of Computer Experiments, Statistical Science, vol.4, issue.4, pp.409-423, 1989.
DOI : 10.1214/ss/1177012413

L. A. Samuelson, D. Vandepitte, and E. R. Paridaens, The background to the ECCS Recommendations for buckling of stringer-stiffened cylinders, Proceeding Int. Col. Stability of Plate and Shell structures, pp.513-522, 1987.

T. J. Santner, B. J. Williams, and E. W. Notz, The design and analysis of computer experiments, 2003.
DOI : 10.1007/978-1-4757-3799-8

M. Schildcrout and M. Stein, Critical axial-compressive stress of a curved rectangular panel with a central longitudinal stiffener, 1949.

H. Schmidt, Stability of steel shell structures, Journal of Constructional Steel Research, vol.55, issue.1-3, pp.159-181, 2000.
DOI : 10.1016/S0143-974X(99)00084-X

W. Schneider, I. Timmel, and E. K. Höhn, The conception of quasi-collapse-affine imperfections: A new approach to unfavourable imperfections of thin-walled shell structures, Thin-Walled Structures, vol.43, issue.8, pp.1202-1224, 2005.
DOI : 10.1016/j.tws.2005.03.003

E. H. Schuette, Buckling of Curved Sheet in Compression and Its Relation to the Secant Modulus, Journal of the Aeronautical Sciences, vol.15, issue.1, pp.18-22, 1948.
DOI : 10.2514/8.11492

E. E. Sechler and L. G. Dunn, Airplane structural analysis and design, 1942.

H. Sekine and O. Tamate, Postbuckling behavior of thin curved panels under axial compression, Japan Society Mechanical Engineering, vol.12, pp.415-420, 1969.

I. A. Sheikh, G. Y. Grondin, and A. E. Elwi, Stiffened steel plates under uniaxial compression, Journal of Constructional Steel Research, vol.58, issue.5-8, pp.1061-1080, 2002.
DOI : 10.1016/S0143-974X(01)00083-9

J. M. Simon-talero and A. Caballero, Plate buckling according to Eurocode 3. Comparison of the effective width method and the reduced stress method, 2010.

T. W. Simpson, D. K. Lin, and E. W. Chen, Sampling strategies for computer experiments : design and analysis, International Journal of Reliability and Applications, vol.2, issue.3, pp.209-240, 2001.

T. W. Simpson, J. D. Poplinski, P. N. Koch, and J. K. Allen, Metamodels for Computer-based Engineering Design: Survey and recommendations, Engineering with Computers, vol.17, issue.2, pp.129-150, 2001.
DOI : 10.1007/PL00007198

C. S. Smith, P. C. Davidson, and J. C. Chapman, Strength and stiffness of ships plating under in-plane compression and tension, Royal Institution of Naval Architects Transactions, vol.129, pp.227-296, 1987.

A. Soderquist, Experimental investigation of stability and post buckling behaviour of stiffened curved plates, 1960.

E. Spier and . Smith, Manual for structural stability analysis of sandwich plates and shells. Rapport technique, p.1457, 1969.

E. Z. Stowell, Critical compressive stress for curved sheet supported along all edges and elastically restrained against rotation along the unloaded edges. National Advisory Committee for Aeronautics, 1943.

G. Taguchi, S. Chowdhury, and E. Y. Wu, Taguchi's quality engineering handbook, 2005.
DOI : 10.1002/9780470258354

J. L. Taylor, Stability of a monocoque in compression. Bristish aeronautical research council, p.1679, 1935.

E. Thiémard, Sur le calcul et la majoration de la discrépance à l'origine, 2000.

S. P. Timoshenko and J. M. Gere, Theory of elastic stability, 1961.

K. Tran, L. Davaine, C. Douthe, and E. K. Sab, Stability of curved panels under uniform axial compression, Journal of Constructional Steel Research, vol.69, issue.1, pp.30-38, 2012.
DOI : 10.1016/j.jcsr.2011.07.015
URL : https://hal.archives-ouvertes.fr/hal-00875801

K. Tran, L. Davaine, C. Douthe, K. Sab, and E. J. Dallot, Étude de la résistance et de la stabilité des panneaux cylindriques non-raidis soumis à une compression uniforme : application aux ouvrages d'art. Revue Construction Métallique, pp.3-17, 2012.

M. J. Van-der-burg, Plate buckling in design codes. The difference between NEN 6771 and NEN-EN 1993-1-5, 2011.

A. Van-der-neut, The general instability of stiffened cylindrical shells under axial compression. Report and Transaction S57, National Aeronautical Research Institute, 1947.

R. Vitali, O. Park, R. T. Haftka, B. V. Sankar, and C. A. Rose, Structural Optimization of a Hat-Stiffened Panel Using Response Surfaces, Journal of Aircraft, vol.39, issue.1, pp.158-166, 2002.
DOI : 10.2514/2.2910

T. Von-karman and E. E. Sechler, The strength of thin plates in compression, Transactions of ASME, vol.54, issue.2, pp.53-57, 1932.

A. C. Walker and S. Sridharan, ANALYSIS OF THE BEHAVIOUR OF AXIALLY COMPRESSED STRINGER-STIFFENED CYLINDRICAL SHELLS., Proceedings of the Institution of Civil Engineers, vol.69, issue.2, pp.447-472, 1980.
DOI : 10.1680/iicep.1980.2546

G. Welter, The Effect of Radius of Curvature and Preliminary Artificial Eccentricities on Buckling Loads of Curved Thin Aluminum-Alloy Sheets for Monocoque Constructions, Journal of the Aeronautical Sciences, vol.13, issue.11, pp.593-596, 1946.
DOI : 10.2514/8.11459

W. Wenzek, The effective width of curved sheet after buckling, Luftfahrtforschung, vol.15, pp.340-343, 1938.

T. Yabuki, Y. Arizumi, T. Shimozato, and Y. Nagamine, Bucklings modes of plategirders curved in plan. Structural and Earthquake Eng, pp.67-72, 1995.

T. Yabuki, Y. Arizumi, and E. S. Yashiro, Ultimate strength and its practical evaluation of cylindrical steel shell panels under various compressions., Doboku Gakkai Ronbunshu, vol.11, issue.489, pp.11-21, 1994.
DOI : 10.2208/jscej.1994.489_37

K. Yumura, S. Katsura, K. Iijima, and E. T. Yao, Simulation of buckling collapse behaviour of cylindrically curved plates under axial compression. Dans The Nineteenth Asian Technical Exchange and Advisory Meeting on Marine Structures, pp.482-489, 2005.

G. Zeng, S. H. Li, Z. Q. Yu, and X. M. Lai, Optimization design of roll profiles for cold roll forming based on response surface method, Materials & Design, vol.30, issue.6, pp.1930-1938, 2009.
DOI : 10.1016/j.matdes.2008.09.018

S. Zhang and I. Khan, Buckling and ultimate capability of plates and stiffened panels in axial compression. Marine structures, p.18, 2009.

Y. Zheng and P. K. Das, Improved response surface method and its application to stiffened plate reliability analysis, Engineering Structures, vol.22, issue.5, pp.544-551, 2000.
DOI : 10.1016/S0141-0296(98)00136-9

R. Zimmermann, H. Klein, and E. A. Kling, Buckling and postbuckling of stringer stiffened fibre composite curved panels ??? Tests and computations, Composite Structures, vol.73, issue.2, pp.150-161, 2006.
DOI : 10.1016/j.compstruct.2005.11.050

R. Zimmermann and R. Rolfes, POSICOSS???improved postbuckling simulation for design of fibre composite stiffened fuselage structures, Composite Structures, vol.73, issue.2, pp.171-174, 2006.
DOI : 10.1016/j.compstruct.2005.11.041

A. Zureick and R. Naqib, Horizontally Curved Steel I-Girders State-of-the-Art Analysis Methods, Journal of Bridge Engineering, vol.4, issue.1, p.38, 1999.
DOI : 10.1061/(ASCE)1084-0702(1999)4:1(38)

A. Sommaire and A. , 1 Exemple de calcul de la charge ultime d'une plaque plane raidie selon l'EN 1993-1-5, p.207

.. Théorie-non-linéaire-de-coque-de-donnel, Application aux panneaux cylindriques, p.214

.. Faible-discrépance, 224 A.4.2 La méthode de quasi-Monte Carlo : des suites à faible discrépance, p.225