K. Ramamurthi, E. Kevin, K. Wilson, . Engelke, L. Richard et al., Volumetric dxa (vxa) : A new method to extract 3d information from multiple in vivo dxa images, Journal of Bone and Mineral Research, vol.25, issue.12, pp.2744-2751, 2010.

T. Blacker, Automated Conformal Hexahedral Meshing Constraints, Challenges and Opportunities, Engineering With Computers, vol.17, issue.3, pp.201-210, 2001.
DOI : 10.1007/PL00013384

D. Bliuc, . Nd-nguyen, . Ve-milch, J. Tv-nguyen, J. Eisman et al., Mortality Risk Associated With Low-Trauma Osteoporotic Fracture and Subsequent Fracture in Men and Women, JAMA, vol.301, issue.5, pp.513-521, 2009.
DOI : 10.1001/jama.2009.50

L. Mary, J. Bouxsein, L. Melton, J. Riggs, E. J. Muller et al., Age-and sex-specific differences in the factor of risk for vertebral fracture : A population-based study using qct, Journal of Bone and Mineral Research, vol.21, issue.9, pp.1475-1482, 2006.

K. Briot, B. Cortet, T. Thomas, M. Audran, H. Blain et al., update of french guidelines for the pharmacological treatment of postmenopausal osteoporosis, Joint Bone Spine, vol.79, issue.3, pp.2012304-313, 2012.

M. Jenni, L. Buckley, K. Cheng, C. Loo, Z. Slyfield et al., Quantitative computed tomography-based predictions of vertebral strength in anterior bending, Spine, vol.32, issue.9, pp.1019-1046, 1976.

M. Jenni, . Buckley, C. Danny, . Leang, M. Tony et al., Sensitivity of vertebral compressive strength to endplate loading distribution, J Biomech Eng, vol.128, issue.5, pp.641-647, 2006.

M. Jenni, K. Buckley, J. Loo, and . Motherway, Comparison of quantitative computed tomography-based measures in predicting vertebral compressive strength, Bone, vol.40, issue.3, pp.767-74, 2007.

J. Buckley, C. Kuo, . Cheng, . Loo, C. Motherway et al., Relative strength of thoracic vertebrae in axial compression versus flexion, The Spine Journal, vol.9, issue.6, pp.478-485, 2009.
DOI : 10.1016/j.spinee.2009.02.010

I. Busscher, J. Ploegmakers, G. Verkerke, and A. Veldhuizen, Comparative anatomical dimensions of the complete human and porcine spine, European Spine Journal, vol.17, issue.2, pp.1104-1114, 2010.
DOI : 10.1007/s00586-010-1326-9

Y. Chaibi, T. Cresson, B. Aubert, J. Hausselle, P. Neyret et al., Fast 3D reconstruction of the lower limb using a parametric model and statistical inferences and clinical measurements calculation from biplanar X-rays, Computer Methods in Biomechanics and Biomedical Engineering, vol.69, issue.6, pp.457-466, 2012.
DOI : 10.1002/jor.1100070118

R. Paul-crawford, E. Christopher, . Cann, M. Tony, and . Keaveny, Finite element models predict in vitro vertebral body compressive strength better than quantitative computed tomography, Bone, vol.33, issue.4, pp.744-50, 2003.
DOI : 10.1016/S8756-3282(03)00210-2

R. P. Crawford and T. M. Keaveny, Relationship Between Axial and Bending Behaviors of the Human Thoracolumbar Vertebra, Spine, vol.29, issue.20, pp.2248-2255, 2004.
DOI : 10.1097/01.brs.0000142435.90314.3b

R. Steven, J. Cummings, and . Melton, Epidemiology and outcomes of osteoporotic fractures, Lancet, vol.359, issue.9319, pp.1761-1768, 2002.

E. Dall-'ara, R. Schmidt, D. Pahr, P. Varga, Y. Chevalier et al., A nonlinear finite element model validation study based on a novel experimental technique for inducing anterior wedge-shape fractures in human vertebral bodies in vitro, Journal of Biomechanics, vol.43, issue.12, pp.2374-2380, 2010.
DOI : 10.1016/j.jbiomech.2010.04.023

W. Taylor-dempster-et-george and R. L. Gaughran, Properties of body segments based on size and weight, American Journal of Anatomy, vol.120, issue.1, pp.33-54, 1967.

S. Deschênes, G. Charron, G. Beaudoin, H. Labelle, J. Dubois et al., Diagnostic Imaging of Spinal Deformities, Spine, vol.35, issue.9, pp.989-994, 2010.
DOI : 10.1097/BRS.0b013e3181bdcaa4

L. Richard, W. Drake, . Vogli, W. Adam, and . Mitchell, Gray's Anatomie pour les étudiants, 2006.

Y. Duan, F. Duboeuf, F. Munoz, D. Pierre, E. Delmas et al., The fracture risk index and bone mineral density as predictors of vertebral structural failure, Osteoporosis International, vol.3, issue.1, pp.54-60, 2006.
DOI : 10.1007/s00198-005-1893-5

J. Dubousset, . Charpak, . Skalli, . De-guise, P. Kalifa et al., Mod??lisation vert??brale et squelettique par le syst??me EOS, Archives de P??diatrie, vol.15, issue.5, pp.665-671, 2008.
DOI : 10.1016/S0929-693X(08)71868-2

J. Dubousset, G. Charpak, W. Skalli, J. Deguise, and G. Kalifa, EOS: A NEW IMAGING SYSTEM WITH LOW DOSE RADIATION IN STANDING POSITION FOR SPINE AND BONE & JOINT DISORDERS, Journal of Musculoskeletal Research, vol.13, issue.01, pp.1-12, 2010.
DOI : 10.1142/S0218957710002430

A. Maghraoui and C. Roux, DXA scanning in clinical practice, QJM, vol.101, issue.8, pp.605-617, 2008.
DOI : 10.1093/qjmed/hcn022

F. Masri, E. Sapin-de-brosses, K. Rhissassi, and W. Skalli, Apparent Young's modulus of vertebral cortico-cancellous bone specimens, Computer Methods in Biomechanics and Biomedical Engineering, vol.174, issue.1, pp.23-28, 2012.
DOI : 10.1016/0021-9290(95)80008-5

N. Eof, Who are candidates for prevention and treatment for osteoporosis ? Osteoporosis International, pp.1-6, 1997.

K. Senthil, A. Eswaran, . Gupta, F. Mark, . Adams et al., Cortical and trabecular load sharing in the human vertebral body, Journal of Bone and Mineral Research, vol.21, issue.2, pp.307-314, 2006.

K. Faulkner, C. Cann, and B. Hasegawa, Effect of bone distribution on vertebral strength: assessment with patient-specific nonlinear finite element analysis., Radiology, vol.179, issue.3, pp.669-74, 1991.
DOI : 10.1148/radiology.179.3.2027972

H. K. Genant, C. Y. Wu, C. Van-kuijk, and M. C. Nevitt, Vertebral fracture assessment using a semiquantitative technique, Journal of Bone and Mineral Research, vol.13, issue.S1, pp.1137-1148, 1993.
DOI : 10.1002/jbmr.5650080915

N. M. Grosland, K. H. Shivanna, V. A. Magnotta, N. A. Kallemeyn, N. A. Devries et al., Ia-femesh : An open-source, interactive, multiblock approach to anatomic finite element model development. Computer methods and programs in biomedicine, pp.96-107, 2009.

R. B. Gullberg, O. Johnell, and J. A. , World-wide Projections for Hip Fracture, Osteoporosis International, vol.7, issue.5, pp.407-413, 1997.
DOI : 10.1007/PL00004148

M. Huang, E. Barrett-connor, A. Gail, . Greendale, M. Deborah et al., Hyperkyphotic Posture and Risk of Future Osteoporotic Fractures: The Rancho Bernardo Study, Journal of Bone and Mineral Research, vol.31, issue.3, pp.419-442, 2006.
DOI : 10.1359/JBMR.051201

L. Humbert, J. De-guise, . Aubert, W. Godbout, and . Skalli, 3D reconstruction of the spine from biplanar X-rays using parametric models based on transversal and longitudinal inferences, Medical Engineering & Physics, vol.31, issue.6, pp.31681-31688, 2009.
DOI : 10.1016/j.medengphy.2009.01.003

K. Imai, I. Ohnishi, M. Bessho, and K. Nakamura, Nonlinear Finite Element Model Predicts Vertebral Bone Strength and Fracture Site, Spine, vol.31, issue.16, pp.311789-94, 1976.
DOI : 10.1097/01.brs.0000225993.57349.df

K. Imai, I. Ohnishi, S. Yamamoto, and K. Nakamura, In Vivo Assessment of Lumbar Vertebral Strength in Elderly Women Using Computed Tomography-Based Nonlinear Finite Element Model, Spine, vol.33, issue.1, pp.27-32, 1976.
DOI : 10.1097/BRS.0b013e31815e3993

O. Johnell and J. , An estimate of the worldwide prevalence and disability associated with osteoporotic fractures, Osteoporosis International, vol.16, issue.suppl 2, pp.1726-1733, 2006.
DOI : 10.1007/s00198-006-0172-4

O. Johnell and J. A. , An estimate of the worldwide prevalence, mortality and disability associated with hip fracture, Osteoporosis International, vol.13, issue.11, pp.897-902, 2004.
DOI : 10.1007/s00198-004-1627-0

E. Jolivet, B. Sandoz, S. Laporte, D. Mitton, and W. Skalli, Fast 3D reconstruction of the rib cage from biplanar radiographs, Medical & Biological Engineering & Computing, vol.21, issue.2, pp.48821-828, 2010.
DOI : 10.1007/s11517-010-0610-5

A. C. Jones and R. K. Wilcox, Finite element analysis of the spine: Towards a framework of verification, validation and sensitivity analysis, Medical Engineering & Physics, vol.30, issue.10, pp.1287-1304, 1996.
DOI : 10.1016/j.medengphy.2008.09.006

A. C. Jones and R. K. Wilcox, Assessment of factors influencing finite element vertebral model predictions, Journal of Biomechanical Engineering, vol.129, issue.6, pp.898-903, 2007.

N. A. Kallemeyn, S. C. Tadepalli, H. Kiran, N. M. Shivanna, and . Grosland, An interactive multiblock approach to meshing the spine. Computer methods and programs in biomedicine, pp.227-235, 2009.

J. Kanis, N. Burlet, C. Cooper, P. Delmas, J. Reginster et al., European guidance for the diagnosis and management of osteoporosis in postmenopausal women, Osteoporosis International, vol.19, issue.7, pp.399-428, 2008.
DOI : 10.1007/s00198-008-0599-x

J. A. Kanis and O. Johnell, Requirements for DXA for the management of osteoporosis in Europe, Osteoporosis International, vol.strategies, issue.3, pp.229-238, 2005.
DOI : 10.1007/s00198-004-1811-2

S. Kerkeni, S. Kolta, J. Fechtenbaum, and C. , Spinal deformity index (SDI) is a good predictor of incident vertebral fractures, Osteoporosis International, vol.18, issue.9, pp.1547-1552, 2009.
DOI : 10.1007/s00198-008-0832-7

C. M. Klotzbuecher, P. D. Ross, P. B. Landsman, T. A. Abbott, I. et al., Patients with Prior Fractures Have an Increased Risk of Future Fractures: A Summary of the Literature and Statistical Synthesis, Journal of Bone and Mineral Research, vol.318, issue.Suppl 5, pp.721-739, 2000.
DOI : 10.1359/jbmr.2000.15.4.721

P. Knupp, Algebraic Mesh Quality Metrics, SIAM Journal on Scientific Computing, vol.23, issue.1, pp.193-218, 2001.
DOI : 10.1137/S1064827500371499

M. Patrick and . Knupp, A method for hexahedral mesh shape optimization, International Journal for Numerical Methods in Engineering, vol.58, issue.2, pp.319-332, 2003.

S. Kolta, L. Bras, . Mitton, J. A. Bousson, . De-guise et al., Three-dimensional X-ray absorptiometry (3D-XA): a method for reconstruction of human bones using a dual X-ray absorptiometry device, Osteoporosis International, vol.18, issue.8, pp.16969-76, 2005.
DOI : 10.1007/s00198-004-1782-3

S. Kolta, . Quiligotti, . Ruyssen-witrand, . Amido, L. Mitton et al., In vivo 3D reconstruction of human vertebrae with the three-dimensional X-ray absorptiometry (3D-XA) method, Osteoporosis International, vol.21, issue.2, pp.185-92, 2008.
DOI : 10.1007/s00198-007-0447-4

L. David, E. F. Kopperdahl, T. M. Morgan, and . Keaveny, Quantitative computed tomography estimates of the mechanical properties of human vertebral trabecular bone, Journal of Orthopaedic Research, vol.20, issue.401, pp.801-805, 2002.

P. Y. Lagacé, T. Cresson, N. Hagemeister, F. Billuart, X. Ohl et al., Skalli : 3d reconstruction of the scapula from biplanar radiographs, Progress in Biomedical Optics and Imaging -Proceedings of SPIE, 2012.

F. Lavaste, W. Skalli, S. Robin, R. Roy-camille, and C. , Three-dimensional geometrical and mechanical modelling of the lumbar spine, Journal of Biomechanics, vol.25, issue.10, pp.1153-1164, 1992.
DOI : 10.1016/0021-9290(92)90071-8

R. Gilles, L. Pennec, S. Sampana, E. Jolivet, J. Vital et al., Ct-based semi-automatic quantification of vertebral fracture restoration, Computer methods in biomechanics and biomedical engineering

F. Lebailly, L. V. Lima, A. Clairemidi, B. Aubert, S. Guerard et al., Semi-automated stereoradiographic upper limb 3D reconstructions using a combined parametric and statistical model: a preliminary study, Surgical and Radiologic Anatomy, vol.33, issue.8, pp.34757-765, 2012.
DOI : 10.1007/s00276-011-0884-9
URL : https://hal.archives-ouvertes.fr/hal-00866977

B. C. Lentle, J. P. Brown, A. Khan, W. D. Leslie, J. Levesque et al., Hodsman : Recognizing and reporting vertebral fractures : Reducing the risk of future osteoporotic fractures, Canadian Association of Radiologists Journal, vol.58, issue.1, pp.27-36, 2007.

A. Michael, . Liebschner, L. David, . Kopperdahl, S. William et al., Finite element modeling of the human thoracolumbar spine, Spine, vol.28, issue.6, pp.559-65, 1976.

S. H. Lo, Volume discretization into tetrahedra?ii. 3d triangulation by advancing front approach. Computers and Structures, pp.501-511, 1991.
DOI : 10.1016/0045-7949(91)90059-u

E. William, H. E. Lorensen, and . Cline, Marching cubes : A high resolution 3d surface construction algorithm, SIGGRAPH Comput. Graph, vol.21, issue.4, pp.163-169, 1987.

M. Lunt, W. Terence, D. Neill, J. Felsenberg, . Reeve et al., Characteristics of a prevalent vertebral deformity predict subsequent vertebral fracture: results from the European Prospective Osteoporosis Study (EPOS), Bone, vol.33, issue.4, pp.505-518, 2003.
DOI : 10.1016/S8756-3282(03)00248-5

J. A. Macneil, J. D. Adachi, D. Goltzman, R. G. Josse, C. S. Kovacs et al., Predicting fracture using 2D finite element modelling, Medical Engineering & Physics, vol.34, issue.4, pp.478-484, 2012.
DOI : 10.1016/j.medengphy.2011.08.008

D. Marshall, O. Johnell, and H. Wedel, 96153999 Meta-analysis of how well measures of bone mineral density predict occurrence of osteoporotic fractures, Maturitas, vol.25, issue.2, pp.3121254-1259, 1996.
DOI : 10.1016/0378-5122(96)81789-0

T. Matsumoto, I. Ohnishi, M. Bessho, K. Imai, S. Ohashi et al., Prediction of Vertebral Strength Under Loading Conditions Occurring in Activities of Daily Living Using a Computed Tomography-Based Nonlinear Finite Element Method, Spine, vol.34, issue.14, pp.341464-341473, 1976.
DOI : 10.1097/BRS.0b013e3181a55636

L. J. Melton, I. , B. L. Riggs, T. M. Keaveny, S. J. Achenbach et al., Structural Determinants of Vertebral Fracture Risk, Journal of Bone and Mineral Research, vol.20, issue.Suppl 3, pp.1885-1892, 1996.
DOI : 10.1359/jbmr.070728

V. Pomero, . Lavaste, W. Imbert, and . Skalli, A Proprioception Based Regulation Model to Estimate the Trunk Muscle Forces, Computer Methods in Biomechanics and Biomedical Engineering, vol.18, issue.6, pp.331-339, 2004.
DOI : 10.1016/S0268-0033(01)00016-X

A. Ramos and J. A. , Simões : Tetrahedral versus hexahedral finite elements in numerical modelling of the proximal femur. Medical engineering and physics, pp.916-924, 2006.

C. Roux, J. Fechtenbaum, S. Kolta, R. Said-nahal, K. Briot et al., Prospective assessment of thoracic kyphosis in postmenopausal women with osteoporosis, Journal of Bone and Mineral Research, vol.31, issue.2, pp.362-370, 2010.
DOI : 10.1359/jbmr.090727

B. Sandoz, S. Laporte, W. Skalli, and D. Mitton, Subject-specific body segment parameters' estimation using biplanar X-rays: a feasibility study, Computer Methods in Biomechanics and Biomedical Engineering, vol.31, issue.6, pp.649-654, 2010.
DOI : 10.1259/0007-1285-60-717-907

E. Sapin-de-brosses, . Briot, . Kolta, . Gravel, C. Skalli et al., Bone mineral density assessment using the EOS^?? low-dose X-ray device: a feasibility study, Proceedings of the Institution of Mechanical Engineers, pp.1263-1271, 2008.
DOI : 10.1243/09544119JEIM450

E. Sapin-de-brosses, F. Chan, G. Ayoub, C. Roux, W. Skalli et al., ANTERIOR BENDING ON WHOLE VERTEBRAE USING CONTROLLED BOUNDARY CONDITIONS FOR MODEL VALIDATION, Journal of Musculoskeletal Research, vol.12, issue.02, pp.71-76, 1996.
DOI : 10.1142/S0218957709002250

E. Sapin-de-brosses, E. Jolivet, C. Travert, D. Mitton, and W. Skalli, Prediction of the Vertebral Strength Using a Finite Element Model Derived From Low-Dose Biplanar Imaging, Spine, vol.37, issue.3, pp.156-162, 2012.
DOI : 10.1097/BRS.0b013e3182293628

É. Sapin-de-brosses, K. Briot, K. Sami, W. Skalli, C. Roux et al., Subject-specific mechanical properties of vertebral cancellous bone assessed using a low-dose X-ray device, IRBM, vol.31, issue.3, pp.31148-153, 2010.
DOI : 10.1016/j.irbm.2010.02.014

H. Schmidt, T. Alber, T. Wehner, R. Blakytny, and H. Wilke, Discretization error when using finite element models: Analysis and evaluation of an underestimated problem, Journal of Biomechanics, vol.42, issue.12, pp.1926-1934, 2009.
DOI : 10.1016/j.jbiomech.2009.05.005

A. Schultz, G. Andersson, and R. Ortengren, Loads on the lumbar spine. Validation of a biomechanical analysis by measurements of intradiscal pressures and myoelectric signals., The Journal of Bone & Joint Surgery, vol.64, issue.5, pp.713-720, 1982.
DOI : 10.2106/00004623-198264050-00008

A. Schultz and G. Andersson, Analysis of Loads on the Lumbar Spine, Spine, vol.6, issue.1, pp.76-82, 1976.
DOI : 10.1097/00007632-198101000-00017

J. Shepherd and C. Johnson, Hexahedral mesh generation constraints, Engineering with Computers, vol.49, issue.1, pp.195-213, 2008.
DOI : 10.1007/s00366-008-0091-4
URL : http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.140.1382

J. Shepherd and C. Johnson, Hexahedral mesh generation for biomedical models in SCIRun, Engineering with Computers, vol.20, issue.21(4, pp.97-114, 2009.
DOI : 10.1007/s00366-008-0108-z

H. Kiran, S. C. Shivanna, N. M. Tadepalli, and . Grosland, Feature-based multiblock finite element mesh generation, Computer- Aided Design, vol.42, issue.12, pp.1108-1116, 2010.

J. Matthew and . Silva, Biomechanics of osteoporotic fractures, Injury, vol.38, issue.3, pp.69-76, 2007.

W. Skalli, S. Champain, and T. Mosnier, Biomécanique du rachis éditeur : Cahiers d'enseignement de la SOFCOT, pp.8-18, 2007.

E. Sornay-rendu, F. Munoz, P. Garnero, F. Duboeuf, D. Pierre et al., Identification of Osteopenic Women at High Risk of Fracture: The OFELY Study, Journal of Bone and Mineral Research, vol.18, issue.Suppl 6, pp.1813-1819, 2005.
DOI : 10.1359/JBMR.050609

F. Taddei, A. Pancanti, and M. Viceconti, An improved method for the automatic mapping of computed tomography numbers onto finite element models, Medical Engineering & Physics, vol.26, issue.1, pp.61-69, 2004.
DOI : 10.1016/S1350-4533(03)00138-3

G. Taubin, Geometric signal processing on polygonal meshes, Eurographics, 2000.

A. Templeton, D. Cody, and M. Liebschner, Updating a 3-D vertebral body finite element model using 2-D images, Medical Engineering & Physics, vol.26, issue.4, pp.329-333, 2004.
DOI : 10.1016/j.medengphy.2004.01.004

A. Templier, L. Denninger, C. Mazel, F. Lavaste, and W. Skalli, Comparison between two different concepts of lumbar posterior osteosynthesis implants A finite-element analysis, European Journal of Orthopaedic Surgery & Traumatology, vol.203, issue.Suppl, pp.27-36, 1998.
DOI : 10.1016/S0021-9290(97)00037-7

C. Travert, E. Jolivet, E. Sapin-de-brosses, D. Mitton, and W. Skalli, Sensitivity of patient-specific vertebral finite element model from low dose imaging to material properties and loading conditions, Medical & Biological Engineering & Computing, vol.13, issue.Suppl 3, pp.1355-1361, 2011.
DOI : 10.1007/s11517-011-0825-0

C. Travert, N. Vilayphiou, H. Follet, J. Pialat, and W. Skalli, Finite element vertebral model for fracture risk prediction : Evaluation of the simplification hypothesis for 2d-bmd-based models, Medical and Biological Engineering and Computing

U. Ginu, E. F. Unnikrishnan, and . Morgan, A new material mapping procedure for quantitative computed tomography-based, continuum finite element analyses of the vertebra, Journal of Biomechanical Engineering, vol.1331331, issue.7, p.71001, 2011.

M. Viceconti, L. Bellingeri, L. Cristofolini, and A. Toni, A comparative study on different methods of automatic mesh generation of human femurs. Medical engineering and physics, pp.1-10, 1998.

T. Whitmarsh, L. Humbert, M. De-craene, L. M. Del-rio, A. F. Barquero et al., Reconstructing the 3D Shape and Bone Mineral Density Distribution of the Proximal Femur From Dual-Energy X-Ray Absorptiometry, IEEE Transactions on Medical Imaging, vol.30, issue.12, pp.302101-2114, 2011.
DOI : 10.1109/TMI.2011.2163074

G. Zheng, Personalized X-Ray Reconstruction of the Proximal Femur via Intensity-Based Non-rigid 2D-3D Registration, Gabor Fichtinger, pp.598-606978, 2011.
DOI : 10.1016/j.compmedimag.2010.03.004